IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit a4856e15e58b54977f1c0c0299309ad4d1f13365 upstream.
commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF
buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status,
but is using "break" at for loop.
This means it is not checking all status. Let's check all BUSIF status.
Fixes: commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kgh1jsw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]
The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-5-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c37e2eb6b83e375e8a654d01598292d5591fc65 ]
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:
1. system in S3 suspend
2. DP/HDMI receiver connected
3. system resumed
4. HDA controller resumed, but card->deferred_resume_work not complete
5. acomp eld_notify callback
6. eld_notify ignored as power state is not CTL_POWER_D0
7. HDA resume deferred work completed, power state set to CTL_POWER_D0
This results in losing the notification, and the jack state reported to
user-space is not correct.
The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.
Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.
BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210416131157.1881366-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a122a116fc6d8fcf2f202dcd185173a54268f239 ]
Current rsnd needs to call .prepare (P) for clock settings,
.trigger for playback start (S) and stop (E).
It should be called as below from SSI point of view.
P -> S -> E -> P -> S -> E -> ...
But, if you used MIXer, below case might happen
(2)
1: P -> S ---> E -> ...
2: P ----> S -> ...
(1) (3)
P(1) setups clock, but E(2) resets it. and starts playback (3).
In such case, it will reports "SSI parent/child should use same rate".
rsnd_ssi_master_clk_start() which is the main function at (P)
was called from rsnd_ssi_init() (= S) before,
but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid
using clk_get_rate() which shouldn't be used under atomic context.
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic")
Because of above patch, rsnd_ssi_master_clk_start() is now called at (P)
which is for non atomic context. But (P) is assuming that spin lock is
*not* used.
One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx
which should be protected by spin lock.
After above patch, adg.c had below patch for other reasons.
commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate()
under atomic context")
clk_get_rate() is used at probe() timing by this patch.
In other words, rsnd_ssi_master_clk_start() is no longer using
clk_get_rate() any more.
This means we can call it from rsnd_ssi_init() (= S) again which is
protected by spin lock.
This patch re-move it to under spin lock, and solves
1. checking ssi->xxx without spin lock issue.
2. clk setting / device start / device stop race condition.
Reported-by: Linh Phung T. Y. <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z0x1jt5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 875c40eadf6ac6644c0f71842a4f30dd9968d281 ]
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2b6f15bc18ac8fbce25398290774c21f5b2cd44 ]
Current implementation of bebob driver doesn't correctly handle the case
that the device has multiple MIDI ports. The cause is the number of MIDI
conformant data channels is passed to AM824 data block processing layer.
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c6a63ced5e07e40f3a5255cb1f0fe0d3be7b14 ]
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in
some cases, e.g. when the backend output rate is set to some value higher
than 48000 Hz and the input rate is 8000 Hz. So passing the value returned
by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in
"FSO/FSI ratio error" and playing no audio at all while the userland
is not properly notified about the issue.
If SRC is unable to convert the requested sample rate to the sample rate
the backend is using, then the requested sample rate should be adjusted in
rsnd_hw_params. The userland will be notified about that change in the
returned hw_params structure.
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Link: https://lore.kernel.org/r/1615870055-13954-1-git-send-email-mikhail_durnev@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c7203a1f751348f35fc4bcb157572d303f7573 ]
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd577acb769301b19c31361d45ae1f145318b7a ]
Currently when the call to usb_urb_ep_type_check fails (returning -EINVAL)
the error return path returns -ENOMEM via the exit label "error". Other
uses of the same error exit label set the err variable to -ENOMEM but this
is not being used. I believe the original intent was for the error exit
path to return the value in err rather than the hard coded -ENOMEM, so
return this rather than the hard coded -ENOMEM.
Addresses-Coverity: ("Unused value")
Fixes: 738d9edcfd44 ("ALSA: usb-audio: Add sanity checks for invalid EPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210420134719.381409-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b93bbc977af55fd10687f2c96c807cba95cb927 ]
Reset (aka power off) happens when the reset gpio is made active.
The reset gpio is GPIO_ACTIVE_LOW
Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1618382024-31725-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa74c223b6fd78a5314b4c61b9abdbed3c2185b4 ]
The 'single_cpu' local variable is assigned by asoc_simple_parse_dai()
and later used in a asoc_simple_canonicalize_cpu() call, assuming the
entire function did not exit on errors.
However the first function returns 0 if passed device_node is NULL,
thus leaving the variable uninitialized and reporting success.
Addresses-Coverity: Uninitialized scalar variable
Fixes: 8f7f298a3337 ("ASoC: simple-card-utils: separate asoc_simple_card_parse_dai()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210407092027.60769-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ]
There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 266fd994b2b0ab7ba3e5541868838ce30775964b upstream.
In 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo
laptops") an existing Lenovo quirk was made more generic by removing a
0x12 pin requirement from the entry. This made the second chance table
Thinkpad jack entry unreachable as the pin configurations became
identical.
Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk
back to the primary pin table as they can co-exist when more specific
configurations come first.
Add a more targeted pin quirk for Lenovo devices that have 0x12 as
0x40000000.
Tested on Yoga 6 (AMD) laptop.
[ Corrected the commit ID -- tiwai ]
Fixes: 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit defce244b01ee12534910a4544e11be5eb927d25 upstream.
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all. That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.
Let's unify them with the single vendor-quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9edeb1109d05953b2f0e24e5b2341a98c3fa78d5 upstream.
Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c656f747df151a0a89756a5312f4ca2116758ba4 upstream.
Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f552ff54c2a700616a02b038e4bf3cbf859f65b7 upstream.
Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab561f8d4bc9b196ae20c960aa5da89fd786ab5 upstream.
Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cd0ed636dd19e7fbe3ebe8de8476e1718d5a8f1 upstream.
Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa143ad39a52d968ac69e426d329bb74f270e6ca upstream.
Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 433f894ec7fbd3b4bf1f3187b2ddd566078c4aef upstream.
Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45461e3b554c75ddff9703539f3711cc3dfb0422 upstream.
Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way. So now we simply keep
the PCI SSID order for the whole.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13e1a4cd490b959a4c72c9f4fb502ef56b190062 upstream.
Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also, user lower hex letters in the entry.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7529c18feecb1af92f9db08c8e7fe446a82d96d upstream.
Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b265047ac56bad8c4f3d0c8bf9cb4e828ee0d28e upstream.
Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a523ef731ac6674dc07574f31bf44cc5bfa14e4d upstream.
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.
The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.
This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.
Tested for all use cases of the driver.
Based on similar fix in kbl_rt5663_rt5514_max98927.c
from Harsha Priya <harshapriya.n@intel.com> and
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415124347.475432-1-lma@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d58970da324732686529655c21791cef0ee547c4 upstream.
cppcheck warning:
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef51a ("ASoC: samsung: Add support for HDMI audio on TM2 board")
Cc: <stable@vger.kernel.org>
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 970e3012c04c96351c413f193a9c909e6d871ce2 upstream.
This applies a SND_PCI_QUIRK(...) to the Clevo PCx0Dx barebones. This
fix enables audio output over the headset jack and ensures that a
microphone connected via the headset combo jack is correctly recognized
when pluged in.
[ Rearranged the list entries in a sorted order -- tiwai ]
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210427153025.451118-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bbb94e57df135ef61bef075d9c99b8d9e89e246 upstream.
Remove a duplicate vendor+subvendor pin fixup entry as one is masking
the other and making it unreachable. Consider the more specific newcomer
as a second chance instead.
The generic entry is made less strict to also match for laptops with
slightly different 0x12 pin configuration. Tested on Lenovo Yoga 6 (AMD)
where 0x12 is 0x40000000.
Fixes: 607184cb1635 ("ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YIXS+GT/dGI/LtK6@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1ee66c5d3c5a0498dd5e3f2af5b8c219a98bba5 upstream.
Fix two bugs with the Intel HDA Realtek ALC233 sound codec
present in Intel NUC NUC8i7BEH and probably a few other similar
NUC models.
These codecs advertise a 4-level microphone input boost amplifier on
pin 0x19, but the highest two boost settings do not work correctly,
and produce only low analog noise that does not seem to contain any
discernible signal. There is an existing fixup for this exact problem
but for a different PCI subsystem ID, so we re-use that logic.
Changing the boost level also triggers a DC spike in the input signal
that bleeds off over about a second and overwhelms any input during
that time. Thankfully, the existing fixup has the side effect of
making the boost control show up in userspace as a mute/unmute switch,
and this keeps (e.g.) PulseAudio from fiddling with it during normal
input volume adjustments.
Finally, the NUC hardware has built-in inverted stereo mics. This
patch also enables the usual fixup for this so the two channels cancel
noise instead of the actual signal.
[ Re-ordered the quirk entry point by tiwai ]
Signed-off-by: Phil Calvin <phil@philcalvin.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/80dc5663-7734-e7e5-25ef-15b5df24511a@philcalvin.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76fae6185f5456865ff1bcb647709d44fd987eb6 upstream.
The GA503 has almost exactly the same default setup as the GA401
model with the same issues. The GA401 quirks solve all the issues
so we will use the full quirk chain.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210419030411.28304-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab2165e2e6ed17345ffa8ee88ca764e8788ebcd7 upstream.
The decibel volume range contains a negative maximum value resulting in
pipewire complaining about the device and effectivly having no sound
output. The wrong values also resulted in the headset sounding muted
already at a mixer level of about ~25%.
PipeWire BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1049
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212897
Signed-off-by: Timo Gurr <timo.gurr@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503110822.10222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a01df925d1bbc97d6f7fe07b157aadb565315337 upstream.
Apply const prefix to the remaining places: the static table for the
unit information, the mixer maps, the validator tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964 upstream.
In the current code, we have some assumption that the audio clock
selector has been set up implicitly and don't want to touch it unless
it's really needed for the fallback autoclock setup. This works for
most devices but some seem having a problem. Partially this was
covered for the devices with a single connector at the initialization
phase (commit 086b957cc17f "ALSA: usb-audio: Skip the clock selector
inquiry for single connections"), but also there are cases where the
wrong clock set up is kept silently. The latter seems to be the cause
of the noises on Behringer devices.
In this patch, we explicitly set up the audio clock selector whenever
the appropriate node is found.
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199327
Link: https://lore.kernel.org/r/CAEsQvcvF7LnO8PxyyCxuRCx=7jNeSCvFAd-+dE0g_rd1rOxxdw@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210413084152.32325-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fb44dd2c1dda18606348acdfdb97e8759dde9df upstream.
In snd_sb_qsound_build, snd_ctl_add(..,p->qsound_switch...) and
snd_ctl_add(..,p->qsound_space..) are called. But the second
arguments of snd_ctl_add() could be freed via snd_ctl_add_replace()
->snd_ctl_free_one(). After the error code is returned,
snd_sb_qsound_destroy(p) is called in __error branch.
But in snd_sb_qsound_destroy(), the freed p->qsound_switch and
p->qsound_space are still used by snd_ctl_remove().
My patch set p->qsound_switch and p->qsound_space to NULL if
snd_ctl_add() failed to avoid the uaf bugs. But these codes need
to further be improved with the code style.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426145541.8070-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e6a731296be9d356fdccee9fb6ae345dad96438 upstream.
Just re-order the cx5066_fixups[] entries for HP devices for avoiding
the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c98f574403dbcf2eb832d5535a10d967333ef2d upstream.
Our code analyzer reported a uaf.
In snd_emu8000_create_mixer, the callee snd_ctl_add(..,emu->controls[i])
calls snd_ctl_add_replace(.., kcontrol,..). Inside snd_ctl_add_replace(),
if error happens, kcontrol will be freed by snd_ctl_free_one(kcontrol).
Then emu->controls[i] points to a freed memory, and the execution comes
to __error branch of snd_emu8000_create_mixer. The freed emu->controls[i]
is used in snd_ctl_remove(card, emu->controls[i]).
My patch set emu->controls[i] to NULL if snd_ctl_add() failed to avoid
the uaf.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426131129.4796-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7a48c710defa0e0fef54d42b7d9e4ab596e2761 ]
When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a27875e91fb9c29de436199d20b33f9413aea77 ]
Amp requires 10 ~ 30ms for the power ON and OFF.
Added 30ms delay for stability.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-2-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c0d6e482062eb5c06ecccfab340abc523bdca00 ]
card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b82e75c15a7dbd564ea3654f3feb61df9e1e6f ]
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927280909fa7d8e61596800d82f18047c6cfbbe4 ]
When checking for enabled cores it isn't enough to check that
some of the requested cores are running, we have to check that
all of them are.
Fixes: 747503b1813a ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 805a23de2657c10c2ca96588a309a42df947bb36 ]
Remove unnecessary parentheses around the right hand side of an assignment
and align the code.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184853.15896-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aa65bacdb70e549a81de03ec72338e1047842883 upstream.
The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.
So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.
Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.
Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281409 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
