IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a7482249a7353bc86aff8127954d5febf02472 ]
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.
When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.
Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.
Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8c2da7e329ce004fee748b921e4c765dc2fa338 upstream.
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().
Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6dacc371b77f473770ec646e220303a84fe96c11 ]
The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not
going to hit the limit so this fix will not affect runtime.
Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef ]
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.
Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccc89737aa6b9f248cf1623014038beb6c2b7f56 ]
This driver has some left over "return 1" on failure style code mixed with
"return negative error codes" style code. The caller doesn't care so we
should just convert everything to return negative error codes.
Then there was a problem that there were two variables used to store error
codes which just resulted in confusion. If qedf_alloc_bdq() returned a
negative error code, we accidentally returned success instead of
propagating the error code. So get rid of the "rc" variable and use
"status" every where.
Also remove the "status = 0" initialization so that these sorts of bugs
will be detected by the compiler in the future.
Link: https://lore.kernel.org/r/20210810085023.GA23998@kili
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dbe57d46d54a847875fa33e7d05877bb341585e ]
This function had some left over code that returned 1 on error instead
negative error codes. Convert everything to use negative error codes. The
caller treats all non-zero returns the same so this does not affect run
time.
A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake. Get rid of the "rc" variable and use
"status" everywhere.
Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.
Link: https://lore.kernel.org/r/20210810084753.GD23810@kili
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 632c4ae6da1d629eddf9da1e692d7617c568c256 ]
If request_region() fails the return value is not set. Return -EBUSY on
error.
Link: https://lore.kernel.org/r/20210715032625.1395495-1-liwei391@huawei.com
Fixes: 8674a8aa2c39 ("scsi: fdomain: Add PCMCIA support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 02c6dcd543f8f051973ee18bfbc4dc3bd595c558 upstream.
We found a hang, the steps to reproduce are as follows:
1. blocking device via scsi_device_set_state()
2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10
3. echo none > /sys/block/sda/queue/scheduler
4. echo "running" >/sys/block/sda/device/state
Step 3 and 4 should complete after step 4, but they hang.
CPU#0 CPU#1 CPU#2
--------------- ---------------- ----------------
Step 1: blocking device
Step 2: dd xxxx
^^^^^^ get request
q_usage_counter++
Step 3: switching scheculer
elv_iosched_store
elevator_switch
blk_mq_freeze_queue
blk_freeze_queue
> blk_freeze_queue_start
^^^^^^ mq_freeze_depth++
> blk_mq_run_hw_queues
^^^^^^ can't run queue when dev blocked
> blk_mq_freeze_queue_wait
^^^^^^ Hang here!!!
wait q_usage_counter==0
Step 4: running device
store_state_field
scsi_rescan_device
scsi_attach_vpd
scsi_vpd_inquiry
__scsi_execute
blk_get_request
blk_mq_alloc_request
blk_queue_enter
^^^^^^ Hang here!!!
wait mq_freeze_depth==0
blk_mq_run_hw_queues
^^^^^^ dispatch IO, q_usage_counter will reduce to zero
blk_mq_unfreeze_queue
^^^^^ mq_freeze_depth--
To fix this, we need to run queue before rescanning device when the device
state changes to SDEV_RUNNING.
Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Signed-off-by: Qiu Laibin <qiulaibin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0f82e2476f6adb9c7a0135cfab8091456990c99 ]
After adding physical volumes to a volume group through vgextend, the
kernel will rescan the partitions. This in turn will cause the device
capacity to be queried.
If the device status is set to offline through sysfs at this time, READ
CAPACITY command will return a result which the host byte is
DID_NO_CONNECT, and the capacity of the device will be set to zero in
read_capacity_error(). After setting device status back to running, the
capacity of the device will remain stuck at zero.
Fix this issue by rescanning device when the device state changes to
SDEV_RUNNING.
Link: https://lore.kernel.org/r/20210727034455.1494960-1-lijinlin3@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: lijinlin <lijinlin3@huawei.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]
Avoid printing a 'target allocation failed' error if the driver
target_alloc() callback function returns -ENXIO. This return value
indicates that the corresponding H:C:T:L entry is empty.
Removing this error reduces the scan time if the user issues SCAN_WILD_CARD
scan operation through sysfs parameter on a host with a lot of empty
H:C:T:L entries.
Avoiding the printk on -ENXIO matches the behavior of the other callback
functions during scanning.
Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]
The list_for_each_entry() iterator, "adapter" in this code, can never be
NULL. If we exit the loop without finding the correct adapter then
"adapter" points invalid memory that is an offset from the list head. This
will eventually lead to memory corruption and presumably a kernel crash.
Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ]
Media event code 3 is defined in the MMC-6 spec as follows:
"MediaRemoval: The media has been removed from the specified slot, and
the Drive is unable to access the media without user intervention. This
applies to media changers only."
This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.
Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com
Signed-off-by: Li Manyi <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.
Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]
Fix array index out of bound exception in fc_rport_prli_resp().
Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80927822e8b6be46f488524cd7d5fe683de97fc4 upstream.
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]
If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5777b7f0f03ce49372203b6521631f62f2810c8f ]
If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets
list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is
non-NULL when it wants to force cleanup.
Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd4aad7ff92ae39c2e93c415bb6761cb8b584da ]
The iscsi offload drivers are setting the shost->max_id to the max number
of sessions they support. The problem is that max_id is not the max number
of targets but the highest identifier the targets can have. To use it to
limit the number of targets we need to set it to max sessions - 1, or we
can end up with a session we might not have preallocated resources for.
Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec29d0ac29be366450a7faffbcf8cba3a6a3b506 ]
If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.
We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session.
Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ]
There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.
Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bedd36e9146b34dda4d6994e3aa1d72bc6442c1 ]
While reenabling the IRQ after IRQ poll there may be a small window for the
firmware to post the replies with interrupts raised. In that case the
driver will not see the interrupts which leads to I/O timeout.
This issue only happens when there are many I/O completions on a single
reply queue. This forces the driver to switch between the interrupt and IRQ
context.
Make the driver process the reply queue one more time after enabling the
IRQ.
Link: https://lore.kernel.org/linux-scsi/20201102072746.27410-1-sreekanth.reddy@broadcom.com/
Link: https://lore.kernel.org/r/20210528131307.25683-5-chandrakanth.patil@broadcom.com
Cc: Tomas Henzl <thenzl@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae6874ba4b43c5a00065f48599811a09d33b873d ]
Consider the case where a VD is deleted and the targetID of that VD is
assigned to a newly created VD. If the sequence of deletion/addition of VD
happens very quickly there is a possibility that second event (VD add)
occurs even before the driver processes the first event (VD delete). As
event processing is done in deferred context the device list remains the
same (but targetID is re-used) so driver will not learn the VD
deletion/additon. I/Os meant for the older VD will be directed to new VD
which may lead to data corruption.
Make driver detect the deleted VD as soon as possible based on the RaidMap
update and block further I/O to that device.
Link: https://lore.kernel.org/r/20210528131307.25683-4-chandrakanth.patil@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5438f48fdd8e1c3f130d32637511efd32038152 ]
The driver doesn't clean up all the allocated resources properly when
scsi_add_host(), megasas_start_aen() function fails during the PCI device
probe.
Clean up all those resources.
Link: https://lore.kernel.org/r/20210528131307.25683-3-chandrakanth.patil@broadcom.com
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e26e3ea028740f934477ec01ba586ab033c35aa ]
scsi_execute() will now return a negative error if there was an error prior
to command submission; evaluate that instead if checking for DRIVER_ERROR.
[mkp: build fix]
Link: https://lore.kernel.org/r/20210427083046.31620-6-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea2f0f77538c50739b9fb4de4700cee5535e1f77 ]
The sysfs handling function sdev_store_queue_depth() enforces that the sdev
queue depth cannot exceed shost can_queue. The initial sdev queue depth
comes from shost cmd_per_lun. However, the LLDD may manually set
cmd_per_lun to be larger than can_queue, which leads to an initial sdev
queue depth greater than can_queue.
Such an issue was reported in [0], which caused a hang. That has since been
fixed in commit fc09acb7de31 ("scsi: scsi_debug: Fix cmd_per_lun, set to
max_queue").
Stop this possibly happening for other drivers by capping shost cmd_per_lun
at shost can_queue.
[0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/
Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aa615d195f1e142c662cb2253f057c9baec7531 ]
The driver is encountering a crash in lpfc_free_iocb_list() while
performing initial attachment.
Code review found this to be an errant failure path that was taken, jumping
to a tag that then referenced structures that were uninitialized.
Fix the failure path.
Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ]
An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.
In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).
Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab17122e758ef68fb21033e25c041144067975f5 ]
After commit 6c11dc060427 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...
Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 93aa71ad7379900e61c8adff6a710a4c18c7c99b upstream.
Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()")
changed the allocation logic to call put_device() to perform host cleanup
with the assumption that IDA removal and stopping the kthread would
properly be performed in scsi_host_dev_release(). However, in the unlikely
case that the error handler thread fails to spawn, shost->ehandler is set
to ERR_PTR(-ENOMEM).
The error handler cleanup code in scsi_host_dev_release() will call
kthread_stop() if shost->ehandler != NULL which will always be the case
whether the kthread was successfully spawned or not. In the case that it
failed to spawn this has the nasty side effect of trying to dereference an
invalid pointer when kthread_stop() is called. The following splat provides
an example of this behavior in the wild:
scsi host11: error handler thread failed to spawn, error = -4
Kernel attempted to read user page (10c) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x0000010c
Faulting instruction address: 0xc00000000818e9a8
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region
hash dm_log dm_mod fuse overlay squashfs loop
CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1
NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8
REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228
XER: 20040001
CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0
GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc
GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000
GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff
GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0
GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288
GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898
GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000
GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc
NIP [c00000000818e9a8] kthread_stop+0x38/0x230
LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160
Call Trace:
[c000000033bb2c48] 0xc000000033bb2c48 (unreliable)
[c0000000089846e8] scsi_host_dev_release+0x98/0x160
[c00000000891e960] device_release+0x60/0x100
[c0000000087e55c4] kobject_release+0x84/0x210
[c00000000891ec78] put_device+0x28/0x40
[c000000008984ea4] scsi_host_alloc+0x314/0x430
[c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi]
[c000000008110104] vio_bus_probe+0xa4/0x4b0
[c00000000892a860] really_probe+0x140/0x680
[c00000000892aefc] driver_probe_device+0x15c/0x200
[c00000000892b63c] device_driver_attach+0xcc/0xe0
[c00000000892b740] __driver_attach+0xf0/0x200
[c000000008926f28] bus_for_each_dev+0xa8/0x130
[c000000008929ce4] driver_attach+0x34/0x50
[c000000008928fc0] bus_add_driver+0x1b0/0x300
[c00000000892c798] driver_register+0x98/0x1a0
[c00000000810eb60] __vio_register_driver+0x80/0xe0
[c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi]
[c0000000080121d0] do_one_initcall+0x60/0x2d0
[c000000008261abc] do_init_module+0x7c/0x320
[c000000008265700] load_module+0x2350/0x25b0
[c000000008265cb4] __do_sys_finit_module+0xd4/0x160
[c000000008031110] system_call_exception+0x150/0x2d0
[c00000000800d35c] system_call_common+0xec/0x278
Fix this be nulling shost->ehandler when the kthread fails to spawn.
Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com
Fixes: 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream.
If the device is power-cycled, it takes time for the initiator to transmit
the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to
respond to the primitive to become ACTIVE. Retry the I/O request to allow
the device time to become ACTIVE.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Quat Le <quat.le@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ]
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.
Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ]
The BusLogic driver has build errors on ia64 due to a name collision (in
the #included FlashPoint.c file). Rename the struct field in struct
sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.
This is the first problem. There are 50+ others after this one:
In file included from ../include/uapi/linux/signal.h:6,
from ../include/linux/signal_types.h:10,
from ../include/linux/sched.h:29,
from ../include/linux/hardirq.h:9,
from ../include/linux/interrupt.h:11,
from ../drivers/scsi/BusLogic.c:27:
../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
15 | #define si_flags _sifields._sigfault._flags
| ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'
43 | u16 si_flags;
| ^~~~~~~~
In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
1076 | pCardInfo->si_flags = 0x0000;
| ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'
Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org
Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dd753ca59d6c8cc09aa1ed24f7657524803c7f3 ]
Handle a reported media event code of 3. This indicates that the media has
been removed from the drive and user intervention is required to proceed.
Return DISK_EVENT_EJECT_REQUEST in that case.
Link: https://lore.kernel.org/r/20210611094402.23884-1-limanyi@uniontech.com
Signed-off-by: ManYi Li <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e57f5cd99ca60cddf40201b0f4ced9f1938e299c ]
Apparently some arrays are now returning "HPE" as the vendor.
Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.com
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c932cd6af9829432888c4a0001d01793a09f12 ]
Do not drop reference count on vn_port->host in qedf_vport_create()
unconditionally. Instead drop the reference count in qedf_vport_destroy().
Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de
Reported-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11714026c02d613c30a149c3f4c4a15047744529 upstream.
scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.
Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.
Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3719f4ff047e20062b8314c23ec3cab84d74c908 upstream.
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
