62271 Commits

Author SHA1 Message Date
Qu Wenruo
c55442cdfd btrfs: qgroup: remove ASYNC_COMMIT mechanism in favor of reserve retry-after-EDQUOT
commit adca4d945c8dca28a85df45c5b117e6dac2e77f1 upstream

commit a514d63882c3 ("btrfs: qgroup: Commit transaction in advance to
reduce early EDQUOT") tries to reduce the early EDQUOT problems by
checking the qgroup free against threshold and tries to wake up commit
kthread to free some space.

The problem of that mechanism is, it can only free qgroup per-trans
metadata space, can't do anything to data, nor prealloc qgroup space.

Now since we have the ability to flush qgroup space, and implemented
retry-after-EDQUOT behavior, such mechanism can be completely replaced.

So this patch will cleanup such mechanism in favor of
retry-after-EDQUOT.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:05 +02:00
Qu Wenruo
fdaf6a322f btrfs: transaction: Cleanup unused TRANS_STATE_BLOCKED
commit 3296bf562443a8ca35aaad959a76a49e9b412760 upstream

The state was introduced in commit 4a9d8bdee368 ("Btrfs: make the state
of the transaction more readable"), then in commit 302167c50b32
("btrfs: don't end the transaction for delayed refs in throttle") the
state is completely removed.

So we can just clean up the state since it's only compared but never
set.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:05 +02:00
Qu Wenruo
36af2de520 btrfs: qgroup: try to flush qgroup space when we get -EDQUOT
commit c53e9653605dbf708f5be02902de51831be4b009 upstream

[PROBLEM]
There are known problem related to how btrfs handles qgroup reserved
space.  One of the most obvious case is the the test case btrfs/153,
which do fallocate, then write into the preallocated range.

#  btrfs/153 1s ... - output mismatch (see xfstests-dev/results//btrfs/153.out.bad)
#      --- tests/btrfs/153.out     2019-10-22 15:18:14.068965341 +0800
#      +++ xfstests-dev/results//btrfs/153.out.bad      2020-07-01 20:24:40.730000089 +0800
#      @@ -1,2 +1,5 @@
#       QA output created by 153
#      +pwrite: Disk quota exceeded
#      +/mnt/scratch/testfile2: Disk quota exceeded
#      +/mnt/scratch/testfile2: Disk quota exceeded
#       Silence is golden
#      ...
#      (Run 'diff -u xfstests-dev/tests/btrfs/153.out xfstests-dev/results//btrfs/153.out.bad'  to see the entire diff)

[CAUSE]
Since commit c6887cd11149 ("Btrfs: don't do nocow check unless we have to"),
we always reserve space no matter if it's COW or not.

Such behavior change is mostly for performance, and reverting it is not
a good idea anyway.

For preallcoated extent, we reserve qgroup data space for it already,
and since we also reserve data space for qgroup at buffered write time,
it needs twice the space for us to write into preallocated space.

This leads to the -EDQUOT in buffered write routine.

And we can't follow the same solution, unlike data/meta space check,
qgroup reserved space is shared between data/metadata.
The EDQUOT can happen at the metadata reservation, so doing NODATACOW
check after qgroup reservation failure is not a solution.

[FIX]
To solve the problem, we don't return -EDQUOT directly, but every time
we got a -EDQUOT, we try to flush qgroup space:

- Flush all inodes of the root
  NODATACOW writes will free the qgroup reserved at run_dealloc_range().
  However we don't have the infrastructure to only flush NODATACOW
  inodes, here we flush all inodes anyway.

- Wait for ordered extents
  This would convert the preallocated metadata space into per-trans
  metadata, which can be freed in later transaction commit.

- Commit transaction
  This will free all per-trans metadata space.

Also we don't want to trigger flush multiple times, so here we introduce
a per-root wait list and a new root status, to ensure only one thread
starts the flushing.

Fixes: c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:05 +02:00
Qu Wenruo
5c79287c2b btrfs: qgroup: allow to unreserve range without releasing other ranges
commit 263da812e87bac4098a4778efaa32c54275641db upstream

[PROBLEM]
Before this patch, when btrfs_qgroup_reserve_data() fails, we free all
reserved space of the changeset.

For example:
	ret = btrfs_qgroup_reserve_data(inode, changeset, 0, SZ_1M);
	ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_1M, SZ_1M);
	ret = btrfs_qgroup_reserve_data(inode, changeset, SZ_2M, SZ_1M);

If the last btrfs_qgroup_reserve_data() failed, it will release the
entire [0, 3M) range.

This behavior is kind of OK for now, as when we hit -EDQUOT, we normally
go error handling and need to release all reserved ranges anyway.

But this also means the following call is not possible:

	ret = btrfs_qgroup_reserve_data();
	if (ret == -EDQUOT) {
		/* Do something to free some qgroup space */
		ret = btrfs_qgroup_reserve_data();
	}

As if the first btrfs_qgroup_reserve_data() fails, it will free all
reserved qgroup space.

[CAUSE]
This is because we release all reserved ranges when
btrfs_qgroup_reserve_data() fails.

[FIX]
This patch will implement a new function, qgroup_unreserve_range(), to
iterate through the ulist nodes, to find any nodes in the failure range,
and remove the EXTENT_QGROUP_RESERVED bits from the io_tree, and
decrease the extent_changeset::bytes_changed, so that we can revert to
previous state.

This allows later patches to retry btrfs_qgroup_reserve_data() if EDQUOT
happens.

Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:05 +02:00
Nikolay Borisov
b7a722fd75 btrfs: make btrfs_qgroup_reserve_data take btrfs_inode
commit 7661a3e033ab782366e0e1f4b6aad0df3555fcbd upstream

There's only a single use of vfs_inode in a tracepoint so let's take
btrfs_inode directly.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:04 +02:00
Nikolay Borisov
dfadea4061 btrfs: make qgroup_free_reserved_data take btrfs_inode
commit df2cfd131fd33dbef1ce33be8b332b1f3d645f35 upstream

It only uses btrfs_inode so can just as easily take it as an argument.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:04 +02:00
Miklos Szeredi
812f39ed5b ovl: prevent private clone if bind mount is not allowed
commit 427215d85e8d1476da1a86b8d67aceb485eb3631 upstream.

Add the following checks from __do_loopback() to clone_private_mount() as
well:

 - verify that the mount is in the current namespace

 - verify that there are no locked children

Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Fixes: c771d683a62e ("vfs: introduce clone_private_mount()")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15 13:08:04 +02:00
Shreyansh Chouhan
17d7c9c940 reiserfs: check directory items on read from disk
[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ]

While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.

This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.

Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com
Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12 13:21:05 +02:00
Yu Kuai
bcad6ece2a reiserfs: add check for root_inode in reiserfs_fill_super
[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]

Our syzcaller report a NULL pointer dereference:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888114e779b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa
RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0
RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001
R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00
R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0
FS:  00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __lookup_slow+0x116/0x2d0
 ? page_put_link+0x120/0x120
 ? __d_lookup+0xfc/0x320
 ? d_lookup+0x49/0x90
 lookup_one_len+0x13c/0x170
 ? __lookup_slow+0x2d0/0x2d0
 ? reiserfs_schedule_old_flush+0x31/0x130
 reiserfs_lookup_privroot+0x64/0x150
 reiserfs_fill_super+0x158c/0x1b90
 ? finish_unfinished+0xb10/0xb10
 ? bprintf+0xe0/0xe0
 ? __mutex_lock_slowpath+0x30/0x30
 ? __kasan_check_write+0x20/0x30
 ? up_write+0x51/0xb0
 ? set_blocksize+0x9f/0x1f0
 mount_bdev+0x27c/0x2d0
 ? finish_unfinished+0xb10/0xb10
 ? reiserfs_kill_sb+0x120/0x120
 get_super_block+0x19/0x30
 legacy_get_tree+0x76/0xf0
 vfs_get_tree+0x49/0x160
 ? capable+0x1d/0x30
 path_mount+0xacc/0x1380
 ? putname+0x97/0xd0
 ? finish_automount+0x450/0x450
 ? kmem_cache_free+0xf8/0x5a0
 ? putname+0x97/0xd0
 do_mount+0xe2/0x110
 ? path_mount+0x1380/0x1380
 ? copy_mount_options+0x69/0x140
 __x64_sys_mount+0xf0/0x190
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.

Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12 13:21:04 +02:00
Theodore Ts'o
097a183f9c ext4: fix potential htree corruption when growing large_dir directories
commit 877ba3f729fd3d8ef0e29bc2a55e57cfa54b2e43 upstream.

Commit b5776e7524af ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split.  Fix this to avoid directory htree corruptions
when using the large_dir feature.

Cc: stable@kernel.org # v5.11
Cc: Благодаренко Артём <artem.blagodarenko@gmail.com>
Fixes: b5776e7524af ("ext4: fix potential htree index checksum corruption)
Reported-by: Denis <denis@voxelsoft.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12 13:21:02 +02:00
Alex Xu (Hello71)
ac23a17381 pipe: increase minimum default pipe size to 2 pages
commit 46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream.

This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:

  int main()
  {
      int pipefd[2];
      for (int i = 0; i < 1025; i++)
          if (pipe(pipefd) == -1)
              return 1;
      size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
      printf("%zd\n", bufsz);
      char *buf = calloc(bufsz, 1);
      write(pipefd[1], buf, bufsz);
      read(pipefd[0], buf, bufsz-1);
      write(pipefd[1], buf, 1);
  }

Note that you may need to increase your RLIMIT_NOFILE before running the
program.

Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12 13:21:02 +02:00
Filipe Manana
86f2a3e9aa btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
[ Upstream commit ecc64fab7d49c678e70bd4c35fe64d2ab3e3d212 ]

When checking if we need to log the new name of a renamed inode, we are
checking if the inode and its parent inode have been logged before, and if
not we don't log the new name. The check however is buggy, as it directly
compares the logged_trans field of the inodes versus the ID of the current
transaction. The problem is that logged_trans is a transient field, only
stored in memory and never persisted in the inode item, so if an inode
was logged before, evicted and reloaded, its logged_trans field is set to
a value of 0, meaning the check will return false and the new name of the
renamed inode is not logged. If the old parent directory was previously
fsynced and we deleted the logged directory entries corresponding to the
old name, we end up with a log that when replayed will delete the renamed
inode.

The following example triggers the problem:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt

  $ mkdir /mnt/A
  $ mkdir /mnt/B
  $ echo -n "hello world" > /mnt/A/foo

  $ sync

  # Add some new file to A and fsync directory A.
  $ touch /mnt/A/bar
  $ xfs_io -c "fsync" /mnt/A

  # Now trigger inode eviction. We are only interested in triggering
  # eviction for the inode of directory A.
  $ echo 2 > /proc/sys/vm/drop_caches

  # Move foo from directory A to directory B.
  # This deletes the directory entries for foo in A from the log, and
  # does not add the new name for foo in directory B to the log, because
  # logged_trans of A is 0, which is less than the current transaction ID.
  $ mv /mnt/A/foo /mnt/B/foo

  # Now make an fsync to anything except A, B or any file inside them,
  # like for example create a file at the root directory and fsync this
  # new file. This syncs the log that contains all the changes done by
  # previous rename operation.
  $ touch /mnt/baz
  $ xfs_io -c "fsync" /mnt/baz

  <power fail>

  # Mount the filesystem and replay the log.
  $ mount /dev/sdc /mnt

  # Check the filesystem content.
  $ ls -1R /mnt
  /mnt/:
  A
  B
  baz

  /mnt/A:
  bar

  /mnt/B:
  $

  # File foo is gone, it's neither in A/ nor in B/.

Fix this by using the inode_logged() helper at btrfs_log_new_name(), which
safely checks if an inode was logged before in the current transaction.

A test case for fstests will follow soon.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08 09:04:07 +02:00
Filipe Manana
b7f0fa2192 btrfs: fix race causing unnecessary inode logging during link and rename
[ Upstream commit de53d892e5c51dfa0a158e812575a75a6c991f39 ]

When we are doing a rename or a link operation for an inode that was logged
in the previous transaction and that transaction is still committing, we
have a time window where we incorrectly consider that the inode was logged
previously in the current transaction and therefore decide to log it to
update it in the log. The following steps give an example on how this
happens during a link operation:

1) Inode X is logged in transaction 1000, so its logged_trans field is set
   to 1000;

2) Task A starts to commit transaction 1000;

3) The state of transaction 1000 is changed to TRANS_STATE_UNBLOCKED;

4) Task B starts a link operation for inode X, and as a consequence it
   starts transaction 1001;

5) Task A is still committing transaction 1000, therefore the value stored
   at fs_info->last_trans_committed is still 999;

6) Task B calls btrfs_log_new_name(), it reads a value of 999 from
   fs_info->last_trans_committed and because the logged_trans field of
   inode X has a value of 1000, the function does not return immediately,
   instead it proceeds to logging the inode, which should not happen
   because the inode was logged in the previous transaction (1000) and
   not in the current one (1001).

This is not a functional problem, just wasted time and space logging an
inode that does not need to be logged, contributing to higher latency
for link and rename operations.

So fix this by comparing the inodes' logged_trans field with the
generation of the current transaction instead of comparing with the value
stored in fs_info->last_trans_committed.

This case is often hit when running dbench for a long enough duration, as
it does lots of rename operations.

This patch belongs to a patch set that is comprised of the following
patches:

  btrfs: fix race causing unnecessary inode logging during link and rename
  btrfs: fix race that results in logging old extents during a fast fsync
  btrfs: fix race that causes unnecessary logging of ancestor inodes
  btrfs: fix race that makes inode logging fallback to transaction commit
  btrfs: fix race leading to unnecessary transaction commit when logging inode
  btrfs: do not block inode logging for so long during transaction commit

Performance results are mentioned in the change log of the last patch.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08 09:04:07 +02:00
Filipe Manana
cb006da62a btrfs: do not commit logs and transactions during link and rename operations
[ Upstream commit 75b463d2b47aef96fe1dc3e0237629963034764b ]

Since commit d4682ba03ef618 ("Btrfs: sync log after logging new name") we
started to commit logs, and fallback to transaction commits when we failed
to log the new names or commit the logs, after link and rename operations
when the target inodes (or their parents) were previously logged in the
current transaction. This was to avoid losing directories despite an
explicit fsync on them when they are ancestors of some inode that got a
new named logged, due to a link or rename operation. However that adds the
cost of starting IO and waiting for it to complete, which can cause higher
latencies for applications.

Instead of doing that, just make sure that when we log a new name for an
inode we don't mark any of its ancestors as logged, so that if any one
does an fsync against any of them, without doing any other change on them,
the fsync commits the log. This way we only pay the cost of a log commit
(or a transaction commit if something goes wrong or a new block group was
created) if the application explicitly asks to fsync any of the parent
directories.

Using dbench, which mixes several filesystems operations including renames,
revealed some significant latency gains. The following script that uses
dbench was used to test this:

  #!/bin/bash

  DEV=/dev/nvme0n1
  MNT=/mnt/btrfs
  MOUNT_OPTIONS="-o ssd -o space_cache=v2"
  MKFS_OPTIONS="-m single -d single"
  THREADS=16

  echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
  mkfs.btrfs -f $MKFS_OPTIONS $DEV
  mount $MOUNT_OPTIONS $DEV $MNT

  dbench -t 300 -D $MNT $THREADS

  umount $MNT

The test was run on bare metal, no virtualization, on a box with 12 cores
(Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel
configuration that is the default of typical distributions (debian in this
case), without debug options enabled (kasan, kmemleak, slub debug, debug
of page allocations, lock debugging, etc).

Results before this patch:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    10750455     0.011   155.088
 Close         7896674     0.001     0.243
 Rename         455222     2.158  1101.947
 Unlink        2171189     0.067   121.638
 Deltree           256     2.425     7.816
 Mkdir             128     0.002     0.003
 Qpathinfo     9744323     0.006    21.370
 Qfileinfo     1707092     0.001     0.146
 Qfsinfo       1786756     0.001    11.228
 Sfileinfo      875612     0.003    21.263
 Find          3767281     0.025     9.617
 WriteX        5356924     0.011   211.390
 ReadX        16852694     0.003     9.442
 LockX           35008     0.002     0.119
 UnlockX         35008     0.001     0.138
 Flush          753458     4.252  1102.249

Throughput 1128.35 MB/sec  16 clients  16 procs  max_latency=1102.255 ms

Results after this patch:

16 clients, after

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    11471098     0.012   448.281
 Close         8426396     0.001     0.925
 Rename         485746     0.123   267.183
 Unlink        2316477     0.080    63.433
 Deltree           288     2.830    11.144
 Mkdir             144     0.003     0.010
 Qpathinfo    10397420     0.006    10.288
 Qfileinfo     1822039     0.001     0.169
 Qfsinfo       1906497     0.002    14.039
 Sfileinfo      934433     0.004     2.438
 Find          4019879     0.026    10.200
 WriteX        5718932     0.011   200.985
 ReadX        17981671     0.003    10.036
 LockX           37352     0.002     0.076
 UnlockX         37352     0.001     0.109
 Flush          804018     5.015   778.033

Throughput 1201.98 MB/sec  16 clients  16 procs  max_latency=778.036 ms
(+6.5% throughput, -29.4% max latency, -75.8% rename latency)

Test case generic/498 from fstests tests the scenario that the previously
mentioned commit fixed.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08 09:04:07 +02:00
Randy Dunlap
174c27d0f9 btrfs: delete duplicated words + other fixes in comments
[ Upstream commit 260db43cd2f556677f6ae818ba09f997eed81004 ]

Delete repeated words in fs/btrfs/.
{to, the, a, and old}
and change "into 2 part" to "into 2 parts".

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08 09:04:07 +02:00
Junxiao Bi
a24d87b429 ocfs2: issue zeroout to EOF blocks
commit 9449ad33be8480f538b11a593e2dda2fb33ca06d upstream.

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04 12:27:37 +02:00
Junxiao Bi
eaaa4284e2 ocfs2: fix zero out valid data
commit f267aeb6dea5e468793e5b8eb6a9c72c0020d418 upstream.

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471f0cc ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04 12:27:37 +02:00
Goldwyn Rodrigues
a8eec69797 btrfs: mark compressed range uptodate only if all bio succeed
commit 240246f6b913b0c23733cfd2def1d283f8cc9bbe upstream.

In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.

Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.

Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04 12:27:37 +02:00
Desmond Cheong Zhi Xi
57429c1ec7 btrfs: fix rw device counting in __btrfs_free_extra_devids
commit b2a616676839e2a6b02c8e40be7f886f882ed194 upstream.

When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.

This error was caught by Syzbot which reported a warning in
close_fs_devices:

  WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  Modules linked in:
  CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
  RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
  RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
  R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
  R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
  FS:  00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
   open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
   btrfs_fill_super fs/btrfs/super.c:1382 [inline]
   btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   fc_mount fs/namespace.c:993 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
   btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   do_new_mount fs/namespace.c:2905 [inline]
   path_mount+0x196f/0x2be0 fs/namespace.c:3235
   do_mount fs/namespace.c:3248 [inline]
   __do_sys_mount fs/namespace.c:3456 [inline]
   __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
   do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:

  btrfs_mount_root():
    btrfs_scan_one_device():
      device_list_add();   <---------------- device added
    btrfs_open_devices():
      open_fs_devices():
        btrfs_open_one_device();   <-------- writable device opened,
	                                     rw device count ++
    btrfs_fill_super():
      open_ctree():
        btrfs_free_extra_devids():
	  __btrfs_free_extra_devids();  <--- writable device removed,
	                              rw device count not decremented
	  fail_tree_roots:
	    btrfs_close_devices():
	      close_fs_devices();   <------- rw device count off by 1

As a note, prior to commit cf89af146b7e ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.

In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.

Additionally, following commit 82372bc816d7 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.

Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Fixes: cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04 12:27:37 +02:00
Christoph Hellwig
befa900533 iomap: remove the length variable in iomap_seek_hole
[ Upstream commit 49694d14ff68fa4b5f86019dbcfb44a8bd213e58 ]

The length variable is rather pointless given that it can be trivially
deduced from offset and size.  Also the initial calculation can lead
to KASAN warnings.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:39 +02:00
Christoph Hellwig
83fb41b2f6 iomap: remove the length variable in iomap_seek_data
[ Upstream commit 3ac1d426510f97ace05093ae9f2f710d9cbe6215 ]

The length variable is rather pointless given that it can be trivially
deduced from offset and size.  Also the initial calculation can lead
to KASAN warnings.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:38 +02:00
Hyunchul Lee
302e1acd4c cifs: fix the out of range assignment to bit fields in parse_server_interfaces
[ Upstream commit c9c9c6815f9004ee1ec87401ed0796853bd70f1b ]

Because the out of range assignment to bit fields
are compiler-dependant, the fields could have wrong
value.

Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:38 +02:00
Desmond Cheong Zhi Xi
e3acb292f0 hfs: add lock nesting notation to hfs_find_init
[ Upstream commit b3b2177a2d795e35dc11597b2609eb1e7e57e570 ]

Syzbot reports a possible recursive lock in [1].

This happens due to missing lock nesting information.  From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed.  Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root.  This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.

Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.

To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+).  This has already been done in hfsplus.

Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-4-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Tested-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:38 +02:00
Desmond Cheong Zhi Xi
af1178296d hfs: fix high memory mapping in hfs_bnode_read
[ Upstream commit 54a5ead6f5e2b47131a7385d0c0af18e7b89cb02 ]

Pages that we read in hfs_bnode_read need to be kmapped into kernel
address space.  However, currently only the 0th page is kmapped.  If the
given offset + length exceeds this 0th page, then we have an invalid
memory access.

To fix this, we kmap relevant pages one by one and copy their relevant
portions of data.

An example of invalid memory access occurring without this fix can be seen
in the following crash report:

  ==================================================================
  BUG: KASAN: use-after-free in memcpy include/linux/fortify-string.h:191 [inline]
  BUG: KASAN: use-after-free in hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
  Read of size 2 at addr ffff888125fdcffe by task syz-executor5/4634

  CPU: 0 PID: 4634 Comm: syz-executor5 Not tainted 5.13.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x195/0x1f8 lib/dump_stack.c:120
   print_address_description.constprop.0+0x1d/0x110 mm/kasan/report.c:233
   __kasan_report mm/kasan/report.c:419 [inline]
   kasan_report.cold+0x7b/0xd4 mm/kasan/report.c:436
   check_region_inline mm/kasan/generic.c:180 [inline]
   kasan_check_range+0x154/0x1b0 mm/kasan/generic.c:186
   memcpy+0x24/0x60 mm/kasan/shadow.c:65
   memcpy include/linux/fortify-string.h:191 [inline]
   hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
   hfs_bnode_read_u16 fs/hfs/bnode.c:34 [inline]
   hfs_bnode_find+0x880/0xcc0 fs/hfs/bnode.c:365
   hfs_brec_find+0x2d8/0x540 fs/hfs/bfind.c:126
   hfs_brec_read+0x27/0x120 fs/hfs/bfind.c:165
   hfs_cat_find_brec+0x19a/0x3b0 fs/hfs/catalog.c:194
   hfs_fill_super+0xc13/0x1460 fs/hfs/super.c:419
   mount_bdev+0x331/0x3f0 fs/super.c:1368
   hfs_mount+0x35/0x40 fs/hfs/super.c:457
   legacy_get_tree+0x10c/0x220 fs/fs_context.c:592
   vfs_get_tree+0x93/0x300 fs/super.c:1498
   do_new_mount fs/namespace.c:2905 [inline]
   path_mount+0x13f5/0x20e0 fs/namespace.c:3235
   do_mount fs/namespace.c:3248 [inline]
   __do_sys_mount fs/namespace.c:3456 [inline]
   __se_sys_mount fs/namespace.c:3433 [inline]
   __x64_sys_mount+0x2b8/0x340 fs/namespace.c:3433
   do_syscall_64+0x37/0xc0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x45e63a
  Code: 48 c7 c2 bc ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d2 e8 88 04 00 00 0f 1f 84 00 00 00 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f9404d410d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 0000000020000248 RCX: 000000000045e63a
  RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007f9404d41120
  RBP: 00007f9404d41120 R08: 00000000200002c0 R09: 0000000020000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
  R13: 0000000000000003 R14: 00000000004ad5d8 R15: 0000000000000000

  The buggy address belongs to the page:
  page:00000000dadbcf3e refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x125fdc
  flags: 0x2fffc0000000000(node=0|zone=2|lastcpupid=0x3fff)
  raw: 02fffc0000000000 ffffea000497f748 ffffea000497f6c8 0000000000000000
  raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888125fdce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff888125fdcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  >ffff888125fdcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                                                  ^
   ffff888125fdd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff888125fdd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ==================================================================

Link: https://lkml.kernel.org/r/20210701030756.58760-3-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:38 +02:00
Desmond Cheong Zhi Xi
89136a47e2 hfs: add missing clean-up in hfs_fill_super
[ Upstream commit 16ee572eaf0d09daa4c8a755fdb71e40dbf8562d ]

Patch series "hfs: fix various errors", v2.

This series ultimately aims to address a lockdep warning in
hfs_find_init reported by Syzbot [1].

The work done for this led to the discovery of another bug, and the
Syzkaller repro test also reveals an invalid memory access error after
clearing the lockdep warning.  Hence, this series is broken up into
three patches:

1. Add a missing call to hfs_find_exit for an error path in
   hfs_fill_super

2. Fix memory mapping in hfs_bnode_read by fixing calls to kmap

3. Add lock nesting notation to tell lockdep that the observed locking
   hierarchy is safe

This patch (of 3):

Before exiting hfs_fill_super, the struct hfs_find_data used in
hfs_find_init should be passed to hfs_find_exit to be cleaned up, and to
release the lock held on the btree.

The call to hfs_find_exit is missing from an error path.  We add it back
in by consolidating calls to hfs_find_exit for error paths.

Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-1-desmondcheongzx@gmail.com
Link: https://lkml.kernel.org/r/20210701030756.58760-2-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31 08:19:38 +02:00
Paul Gortmaker
eef99860c6 cgroup1: fix leaked context root causing sporadic NULL deref in LTP
commit 1e7107c5ef44431bc1ebbd4c353f1d7c22e5f2ec upstream.

Richard reported sporadic (roughly one in 10 or so) null dereferences and
other strange behaviour for a set of automated LTP tests.  Things like:

   BUG: kernel NULL pointer dereference, address: 0000000000000008
   #PF: supervisor read access in kernel mode
   #PF: error_code(0x0000) - not-present page
   PGD 0 P4D 0
   Oops: 0000 [#1] PREEMPT SMP PTI
   CPU: 0 PID: 1516 Comm: umount Not tainted 5.10.0-yocto-standard #1
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
   RIP: 0010:kernfs_sop_show_path+0x1b/0x60

...or these others:

   RIP: 0010:do_mkdirat+0x6a/0xf0
   RIP: 0010:d_alloc_parallel+0x98/0x510
   RIP: 0010:do_readlinkat+0x86/0x120

There were other less common instances of some kind of a general scribble
but the common theme was mount and cgroup and a dubious dentry triggering
the NULL dereference.  I was only able to reproduce it under qemu by
replicating Richard's setup as closely as possible - I never did get it
to happen on bare metal, even while keeping everything else the same.

In commit 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
we see this as a part of the overall change:

   --------------
           struct cgroup_subsys *ss;
   -       struct dentry *dentry;

   [...]

   -       dentry = cgroup_do_mount(&cgroup_fs_type, fc->sb_flags, root,
   -                                CGROUP_SUPER_MAGIC, ns);

   [...]

   -       if (percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
   -               struct super_block *sb = dentry->d_sb;
   -               dput(dentry);
   +       ret = cgroup_do_mount(fc, CGROUP_SUPER_MAGIC, ns);
   +       if (!ret && percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
   +               struct super_block *sb = fc->root->d_sb;
   +               dput(fc->root);
                   deactivate_locked_super(sb);
                   msleep(10);
                   return restart_syscall();
           }
   --------------

In changing from the local "*dentry" variable to using fc->root, we now
export/leave that dentry pointer in the file context after doing the dput()
in the unlikely "is_dying" case.   With LTP doing a crazy amount of back to
back mount/unmount [testcases/bin/cgroup_regression_5_1.sh] the unlikely
becomes slightly likely and then bad things happen.

A fix would be to not leave the stale reference in fc->root as follows:

   --------------
                  dput(fc->root);
  +               fc->root = NULL;
                  deactivate_locked_super(sb);
   --------------

...but then we are just open-coding a duplicate of fc_drop_locked() so we
simply use that instead.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org      # v5.1+
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes: 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 08:19:37 +02:00
David Sterba
11561d2f7b btrfs: compression: don't try to compress if we don't have enough pages
commit f2165627319ffd33a6217275e5690b1ab5c45763 upstream

The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.

The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28 13:31:02 +02:00
Mike Kravetz
b12ead825f hugetlbfs: fix mount mode command line processing
commit e0f7e2b2f7e7864238a4eea05cc77ae1be2bf784 upstream.

In commit 32021982a324 ("hugetlbfs: Convert to fs_context") processing
of the mount mode string was changed from match_octal() to fsparam_u32.

This changed existing behavior as match_octal does not require octal
values to have a '0' prefix, but fsparam_u32 does.

Use fsparam_u32oct which provides the same behavior as match_octal.

Link: https://lkml.kernel.org/r/20210721183326.102716-1-mike.kravetz@oracle.com
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dennis Camera <bugs+kernel.org@dtnr.ch>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28 13:31:01 +02:00
Peter Collingbourne
60dbbd76f1 userfaultfd: do not untag user pointers
commit e71e2ace5721a8b921dca18b045069e7bb411277 upstream.

Patch series "userfaultfd: do not untag user pointers", v5.

If a user program uses userfaultfd on ranges of heap memory, it may end
up passing a tagged pointer to the kernel in the range.start field of
the UFFDIO_REGISTER ioctl.  This can happen when using an MTE-capable
allocator, or on Android if using the Tagged Pointers feature for MTE
readiness [1].

When a fault subsequently occurs, the tag is stripped from the fault
address returned to the application in the fault.address field of struct
uffd_msg.  However, from the application's perspective, the tagged
address *is* the memory address, so if the application is unaware of
memory tags, it may get confused by receiving an address that is, from
its point of view, outside of the bounds of the allocation.  We observed
this behavior in the kselftest for userfaultfd [2] but other
applications could have the same problem.

Address this by not untagging pointers passed to the userfaultfd ioctls.
Instead, let the system call fail.  Also change the kselftest to use
mmap so that it doesn't encounter this problem.

[1] https://source.android.com/devices/tech/debug/tagged-pointers
[2] tools/testing/selftests/vm/userfaultfd.c

This patch (of 2):

Do not untag pointers passed to the userfaultfd ioctls.  Instead, let
the system call fail.  This will provide an early indication of problems
with tag-unaware userspace code instead of letting the code get confused
later, and is consistent with how we decided to handle brk/mmap/mremap
in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in
brk()/mmap()/mremap()"), as well as being consistent with the existing
tagged address ABI documentation relating to how ioctl arguments are
handled.

The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag
user pointers") plus some fixups to some additional calls to
validate_range that have appeared since then.

[1] https://source.android.com/devices/tech/debug/tagged-pointers
[2] tools/testing/selftests/vm/userfaultfd.c

Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com
Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b
Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mitch Phillips <mitchp@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William McVicker <willmcvicker@google.com>
Cc: <stable@vger.kernel.org>	[5.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28 13:31:01 +02:00
Anand Jain
77713fb336 btrfs: check for missing device in btrfs_trim_fs
commit 16a200f66ede3f9afa2e51d90ade017aaa18d213 upstream.

A fstrim on a degraded raid1 can trigger the following null pointer
dereference:

  BTRFS info (device loop0): allowing degraded mounts
  BTRFS info (device loop0): disk space caching is enabled
  BTRFS info (device loop0): has skinny extents
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS info (device loop0): enabling ssd optimizations
  BUG: kernel NULL pointer dereference, address: 0000000000000620
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs]
  RSP: 0018:ffff959541797d28 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608
  RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0
  RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000
  R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8
  FS:  00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0
  Call Trace:
  btrfs_ioctl_fitrim+0x167/0x260 [btrfs]
  btrfs_ioctl+0x1c00/0x2fe0 [btrfs]
  ? selinux_file_ioctl+0x140/0x240
  ? syscall_trace_enter.constprop.0+0x188/0x240
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0

Reproducer:

  $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1
  $ mount /dev/loop0 /btrfs
  $ umount /btrfs
  $ btrfs dev scan --forget
  $ mount -o degraded /dev/loop0 /btrfs

  $ fstrim /btrfs

The reason is we call btrfs_trim_free_extents() for the missing device,
which uses device->bdev (NULL for missing device) to find if the device
supports discard.

Fix is to check if the device is missing before calling
btrfs_trim_free_extents().

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28 13:31:00 +02:00
Marcelo Henrique Cerri
f323809e31 proc: Avoid mixing integer types in mem_rw()
[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28 13:30:58 +02:00
David Howells
f726817d6b afs: Fix tracepoint string placement with built-in AFS
[ Upstream commit 6c881ca0b3040f3e724eae513117ba4ddef86057 ]

To quote Alexey[1]:

    I was adding custom tracepoint to the kernel, grabbed full F34 kernel
    .config, disabled modules and booted whole shebang as VM kernel.

    Then did

	perf record -a -e ...

    It crashed:

	general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
	CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
	RIP: 0010:t_show+0x22/0xd0

    Then reproducer was narrowed to

	# cat /sys/kernel/tracing/printk_formats

    Original F34 kernel with modules didn't crash.

    So I started to disable options and after disabling AFS everything
    started working again.

    The root cause is that AFS was placing char arrays content into a
    section full of _pointers_ to strings with predictable consequences.

    Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
    CM_NAME macro.

    Steps to reproduce:

	CONFIG_AFS=y
	CONFIG_TRACING=y

	# cat /sys/kernel/tracing/printk_formats

Fix this by the following means:

 (1) Add enum->string translation tables in the event header with the AFS
     and YFS cache/callback manager operations listed by RPC operation ID.

 (2) Modify the afs_cb_call tracepoint to print the string from the
     translation table rather than using the string at the afs_call name
     pointer.

 (3) Switch translation table depending on the service we're being accessed
     as (AFS or YFS) in the tracepoint print clause.  Will this cause
     problems to userspace utilities?

     Note that the symbolic representation of the YFS service ID isn't
     available to this header, so I've put it in as a number.  I'm not sure
     if this is the best way to do this.

 (4) Remove the name wrangling (CM_NAME) macro and put the names directly
     into the afs_call_type structs in cmservice.c.

Fixes: 8e8d7f13b6d5a9 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28 13:30:58 +02:00
Daniel Rosenberg
52b01a8086 f2fs: Show casefolding support only when supported
commit 39307f8ee3539478c28e71b4909b5b028cce14b1 upstream.

The casefolding feature is only supported when CONFIG_UNICODE is set.
This modifies the feature list f2fs presents under sysfs accordingly.

Fixes: 5aba54302a46 ("f2fs: include charset encoding information in the superblock")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25 14:35:13 +02:00
Paulo Alcantara
f7d1fa65e7 cifs: prevent NULL deref in cifs_compose_mount_options()
[ Upstream commit 03313d1c3a2f086bb60920607ab79ac8f8578306 ]

The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().

Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25 14:35:13 +02:00
Eric Sandeen
c1dafbb261 seq_file: disallow extremely large seq buffer allocations
commit 8cae8cd89f05f6de223d63e6d15e31c8ba9cf53b upstream.

There is no reasonable need for a buffer larger than this, and it avoids
int overflow pitfalls.

Fixes: 058504edd026 ("fs/seq_file: fallback to vmalloc allocation")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20 16:10:54 +02:00
Trond Myklebust
3b03882123 NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
[ Upstream commit f46f84931a0aa344678efe412d4b071d84d8a805 ]

After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for
whether or not ds->ds_clp has already been initialised, so we can end up
adding the same transports multiple times.

Fixes: fc821d59209d ("pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:50 +02:00
Zhihao Cheng
1d9d997850 ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
[ Upstream commit a801fcfeef96702fa3f9b22ad56c5eb1989d9221 ]

xfstests-generic/476 reports a warning message as below:

WARNING: CPU: 2 PID: 30347 at fs/inode.c:361 inc_nlink+0x52/0x70
Call Trace:
  do_rename+0x502/0xd40 [ubifs]
  ubifs_rename+0x8b/0x180 [ubifs]
  vfs_rename+0x476/0x1080
  do_renameat2+0x67c/0x7b0
  __x64_sys_renameat2+0x6e/0x90
  do_syscall_64+0x66/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Following race case can cause this:
         rename_whiteout(Thread 1)             wb_workfn(Thread 2)
ubifs_rename
  do_rename
                                          __writeback_single_inode
					    spin_lock(&inode->i_lock)
    whiteout->i_state |= I_LINKABLE
                                            inode->i_state &= ~dirty;
---- How race happens on i_state:
    (tmp = whiteout->i_state | I_LINKABLE)
		                           (tmp = inode->i_state & ~dirty)
    (whiteout->i_state = tmp)
		                           (inode->i_state = tmp)
----
					    spin_unlock(&inode->i_lock)
    inc_nlink(whiteout)
    WARN_ON(!(inode->i_state & I_LINKABLE)) !!!

Fix to add i_lock to avoid i_state update race condition.

Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:50 +02:00
Gao Xiang
d0b32dc140 nfs: fix acl memory leak of posix_acl_create()
[ Upstream commit 1fcb6fcd74a222d9ead54d405842fc763bb86262 ]

When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.

Fixes: 013cdf1088d7 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs")
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:49 +02:00
Trond Myklebust
81e03fe5bf NFSv4: Initialise connection to the server in nfs4_alloc_client()
[ Upstream commit dd99e9f98fbf423ff6d365b37a98e8879170f17c ]

Set up the connection to the NFSv4 server in nfs4_alloc_client(), before
we've added the struct nfs_client to the net-namespace's nfs_client_list
so that a downed server won't cause other mounts to hang in the trunking
detection code.

Reported-by: Michael Wakabayashi <mwakabayashi@vmware.com>
Fixes: 5c6e5b60aae4 ("NFS: Fix an Oops in the pNFS files and flexfiles connection setup to the DS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:49 +02:00
Chao Yu
5b6cde3bae f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
[ Upstream commit 0dd571785d61528d62cdd8aa49d76bc6085152fe ]

As marcosfrm reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=213089

Initramfs generators rely on "pre" softdeps (and "depends") to include
additional required modules.

F2FS does not declare "pre: crc32" softdep. Then every generator (dracut,
mkinitcpio...) has to maintain a hardcoded list for this purpose.

Hence let's use MODULE_SOFTDEP("pre: crc32") in f2fs code.

Fixes: 43b6573bac95 ("f2fs: use cryptoapi crc32 functions")
Reported-by: marcosfrm <marcosfrm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:49 +02:00
Trond Myklebust
ae1a6af2f8 NFS: nfs_find_open_context() may only select open files
[ Upstream commit e97bc66377bca097e1f3349ca18ca17f202ff659 ]

If a file has already been closed, then it should not be selected to
support further I/O.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[Trond: Fix an invalid pointer deref reported by Colin Ian King]
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:48 +02:00
Jeff Layton
04a333cf98 ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
[ Upstream commit 22d41cdcd3cfd467a4af074165357fcbea1c37f5 ]

The checks for page->mapping are odd, as set_page_dirty is an
address_space operation, and I don't see where it would be called on a
non-pagecache page.

The warning about the page lock also seems bogus.  The comment over
set_page_dirty() says that it can be called without the page lock in
some rare cases. I don't think we want to warn if that's the case.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:48 +02:00
Mike Marshall
ab720715b8 orangefs: fix orangefs df output.
[ Upstream commit 0fdec1b3c9fbb5e856a40db5993c9eaf91c74a83 ]

Orangefs df output is whacky. Walt Ligon suggested this might fix it.
It seems way more in line with reality now...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:48 +02:00
Jiapeng Chong
e54625f3f0 fs/jfs: Fix missing error code in lmLogInit()
[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc.

Eliminate the follow smatch warning:

fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20 16:10:42 +02:00
Pavel Skripkin
a21e5cb1a6 jfs: fix GPF in diFree
commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream.

Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:

	struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
	struct inomap *imap = JFS_IP(ipimap)->i_imap;

JFS_IP() will return invalid pointer when ipimap == NULL

Call Trace:
 diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
 jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
 evict+0x2ed/0x750 fs/inode.c:578
 iput_final fs/inode.c:1654 [inline]
 iput.part.0+0x3fe/0x820 fs/inode.c:1680
 iput+0x58/0x70 fs/inode.c:1670

Reported-and-tested-by: syzbot+0a89a7b56db04c21a656@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19 08:53:18 +02:00
Zhihao Cheng
7adc05b73d ubifs: Fix races between xattr_{set|get} and listxattr operations
commit f4e3634a3b642225a530c292fdb1e8a4007507f5 upstream.

UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].

Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.

[1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com

Fixes: 1e51764a3c2ac05a23 ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org  # v2.6+
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19 08:53:16 +02:00
Eric Biggers
0e105eed09 fscrypt: don't ignore minor_hash when hash is 0
commit 77f30bfcfcf484da7208affd6a9e63406420bf91 upstream.

When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.

This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case.  Fix this by
removing the special case for 'hash == 0'.

This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/.  The original ext4 and
f2fs code passed the hash by pointer instead of by value.  So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL.  But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have.  There is no
need to handle this any differently from the hashes actually being 0.

It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie.  ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.

Fixes: 0b81d0779072 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc: <stable@vger.kernel.org> # v4.6+
Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19 08:53:14 +02:00
Arturo Giusti
80d505aee6 udf: Fix NULL pointer dereference in udf_symlink function
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]

In function udf_symlink, epos.bh is assigned with the value returned
by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c
and returns the value of sb_getblk function that could be NULL.
Then, epos.bh is used without any check, causing a possible
NULL pointer dereference when sb_getblk fails.

This fix adds a check to validate the value of epos.bh.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083
Signed-off-by: Arturo Giusti <koredump@protonmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19 08:53:08 +02:00
Pavel Skripkin
5e2d303b45 reiserfs: add check for invalid 1st journal block
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]

syzbot reported divide error in reiserfs.
The problem was in incorrect journal 1st block.

Syzbot's reproducer manualy generated wrong superblock
with incorrect 1st block. In journal_init() wasn't
any checks about this particular case.

For example, if 1st journal block is before superblock
1st block, it can cause zeroing important superblock members
in do_journal_end().

Link: https://lore.kernel.org/r/20210517121545.29645-1-paskripkin@gmail.com
Reported-by: syzbot+0ba9909df31c6a36974d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19 08:53:08 +02:00
Chung-Chiang Cheng
f0acb12b98 configfs: fix memleak in configfs_release_bin_file
[ Upstream commit 3c252b087de08d3cb32468b54a158bd7ad0ae2f7 ]

When reading binary attributes in progress, buffer->bin_buffer is setup in
configfs_read_bin_file() but never freed.

Fixes: 03607ace807b4 ("configfs: implement binary attributes")
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
[hch: move the vfree rather than duplicating it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14 16:53:46 +02:00