IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit bc75a6eb856cb1507fa907bf6c1eda91b3fef52f upstream.
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920eb ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a08f789d2ab5242c07e716baf9a835725046be89 upstream.
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85e123c27d5cbc22cfdc01de1e2ca1d9003a02d0 upstream.
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream.
Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.
This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.
Re-add the lsr_save_flags fix and properly mark it's a fix.
Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Cc: stable <stable@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3755278f078460b021cd0384562977bf2039a57a upstream.
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this.
Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()")
Cc: stable <stable@kernel.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream.
Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti.
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream.
The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it.
Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ]
Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.
Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de236 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.
Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ]
of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.
Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ]
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcea997beed694cbd8705100ca1a6eb0d886de69 ]
If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text. This can result in
comically wrong output. For example:
$ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
enter_from_user_mode+0x1c/0x30:
find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
(inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504
Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.
Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ]
The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.
This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.
If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.
If an in-range branch were erroeously rejected, then:
* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
use of a PLT entry, which is benign.
Note that this is the common case, as this is selected by
CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
which distributions typically seelct. This is also selected by
CONFIG_ARM64_ERRATUM_843419.
* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
internal ftrace failures.
* For core kernel text, this would result in internal ftrace failues.
Note that for this to happen, the kernel text would need to be at
least 128M bytes in size, and typical configurations are smaller tha
this.
Fix this by calculating the offset *from* the branch *to* the target in
both functions.
Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ]
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.
Remove the erroneous kfree() from the .remove() function.
Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ]
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.
In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)
Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.
Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c245358ce0b13669f6d1625f7a4e05c41f28980 ]
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: eb1f2930609b ("Driver for the Atmel on-chip SSC on AT32AP and AT91")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601123026.7119-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ]
After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.
Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.
Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()
Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb050670ac90a167ecfa3f9590f92966c9a3677 ]
If ADQ is enabled for a VF, then actual number of queue pair
is a number of currently available traffic classes for this VF.
Without this change the configuration of the Rx/Tx queues
fails with error.
Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3238d36c3a2be0a29a9d848d6c51e1b14be6692 ]
Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.
Fix checking hw_tc parameter which blocks creation of filters on TC0.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)
Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe44fb23d6ccde4c914c44ef74ab8d9d9ba02bea ]
If the server tells us that a pNFS layout is not available for a
specific file, then we should not keep pounding it with further
layoutget requests.
Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 846bb97e131d7938847963cca00657c995b1fce1 ]
This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.
As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.
While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:
Pros:
- The RNG machinery gets initialized super quickly, and there's no
messing around with subsequent blocking behavior.
- The bootloader mechanism is used by kexec in order for the prior
kernel to initialize the RNG of the next kernel, which increases
the entropy available to early boot daemons of the next kernel.
- Previous objections related to backdoors centered around
Dual_EC_DRBG-like kleptographic systems, in which observing some
amount of the output stream enables an adversary holding the right key
to determine the entire output stream.
This used to be a partially justified concern, because RDRAND output
was mixed into the output stream in varying ways, some of which may
have lacked pre-image resistance (e.g. XOR or an LFSR).
But this is no longer the case. Now, all usage of RDRAND and
bootloader seeds go through a cryptographic hash function. This means
that the CPU would have to compute a hash pre-image, which is not
considered to be feasible (otherwise the hash function would be
terribly broken).
- More generally, if the CPU is backdoored, the RNG is probably not the
realistic vector of choice for an attacker.
- These CPU or bootloader seeds are far from being the only source of
entropy. Rather, there is generally a pretty huge amount of entropy,
not all of which is credited, especially on CPUs that support
instructions like RDRAND. In other words, assuming RDRAND outputs all
zeros, an attacker would *still* have to accurately model every single
other entropy source also in use.
- The RNG now reseeds itself quite rapidly during boot, starting at 2
seconds, then 4, then 8, then 16, and so forth, so that other sources
of entropy get used without much delay.
- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
command line, and paranoid system builders can set the Kconfig options
to N, so there's no reduction or restriction of optionality.
- It's a practical default.
- All the distros have it set this way. Microsoft and Apple trust it
too. Bandwagon.
Cons:
- RDRAND *could* still be backdoored with something like a fixed key or
limited space serial number seed or another indexable scheme like
that. (However, it's hard to imagine threat models where the CPU is
backdoored like this, yet people are still okay making *any*
computations with it or connecting it to networks, etc.)
- RDRAND *could* be defective, rather than backdoored, and produce
garbage that is in one way or another insufficient for crypto.
- Suggesting a *reduction* in paranoia, as this commit effectively does,
may cause some to question my personal integrity as a "security
person".
- Bootloader seeds and RDRAND are generally very difficult if not all
together impossible to audit.
Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.
Ard made an additional argument in [1]:
We're at the mercy of firmware and micro-architecture anyway, given
that we are also relying on it to ensure that every instruction in
the kernel's executable image has been faithfully copied to memory,
and that the CPU implements those instructions as documented. So I
don't think firmware or ISA bugs related to RNGs deserve special
treatment - if they are broken, we should quirk around them like we
usually do. So enabling these by default is a step in the right
direction IMHO.
In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:
A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
static key warning (but it does go on to boot). The significant
difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
defining that on top of multi_v7_defconfig demonstrates the issue on
a clean 5.15.45. Conversely, not setting that option in a
downstream kernel build avoids the warning
[1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f2c0d2919a14002760f89f4e02960c735a316d2 ]
When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst
Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f638a84afef3dfe10554c51820c16e39a278c915 ]
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ]
Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.
Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.
So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.
Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.
Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ]
The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.
Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 527f4643e03c298c1e3321cfa27866b1374a55e1 ]
Added the support of new Huawei codec HW8326. The HW8326 is developed
by Huawei with Realtek's IP Core, and it's compatible with ALC256.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Link: https://lore.kernel.org/r/20220608082357.26898-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d64c491911322af1dcada98e5b9ee0d87e8c8fee ]
Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.
Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7e9c0c1ec05f18d320ecc8a31eec59d2af1af9 ]
NVMe Asynchronous Event Request commands have no command timeout value per
specifications.
Set WQE option to allow a reduced FLUSH polling rate for I/O error
detection specifically for nvme_admin_async_event commands.
Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 336d63615466b4c06b9401c987813fd19bdde39b ]
After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The
target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001. The target then sends a
LOGO to the fabric DID. lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps. The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.
Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.
Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf71d59c2eceadfcde0fb52e237990a0909880d7 ]
vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.
Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com
Signed-off-by: Wentao Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2abdf9f80019e8244d3806ed0e1c9f725e50b452 ]
Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220603115003.3865834-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8259610c2ec01c5cbfb61882ae176aabacac9c19 ]
Currently the put() method for the deemphasis control returns 0 when a new
value is written to the control even if the value changed, meaning events
are not generated. Fix this, skip the work of updating the value when it is
unchanged and then return 1 after having done so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603123937.4013603-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f5272c0f7d2e53c6f2480f46725442776f5f78 ]
If the audio CODEC is playing sound when the system is suspended,
it can be left in a state which throws the following error:
wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16
Once this error has occurred, the audio will not work again until rebooted.
Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ]
In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8928ada9b96944cadd8b65d191e33199fd38782 ]
A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91e90c712fade0b69cdff7cc6512f6099bd18ae5 ]
The Bypass Volume is accidentally using a -6dB minimum TLV rather than
the correct -60dB minimum. Add a new TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fbd6dd68127927e844912a16741016d432a0737 ]
This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.
Reported-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5005a2345825eb8346546d99bfe669f73111b5c5 ]
The digital volume TLV specifies the step as 0.25dB but the actual step
of the control is 0.125dB. Update the TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf5aabf524eec61013e506f764a0b2652dc5665 ]
The datasheet specifies the range of the mixer volumes as between
-51.5dB and 12dB with a 0.5dB step. Update the TLVs for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ]
Limit the error msg to avoid flooding the console. If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log. Use pr_err_once() to limit that.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeca8a3295022bcec46697f16e098140423d8463 ]
We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.
After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.
After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1b29ba2f2c171b9bea73be993bfdf0a62d37d15 ]
The following KASAN warning was reported in our kernel.
BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
Read of size 4 at addr d216f958 by task ps/14437
CPU: 3 PID: 14437 Comm: ps Tainted: G O 5.10.0 #1
Call Trace:
[daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
[daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
[daa63908] [c035d6bc] kasan_report+0x1ac/0x218
[daa63948] [c00496e8] get_wchan+0x188/0x250
[daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
[daa63b98] [c0455ac8] proc_single_show+0x98/0x170
[daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
[daa63c38] [c03cb47c] seq_read+0x1dc/0x290
[daa63d68] [c037fc94] vfs_read+0x164/0x510
[daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
[daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
--- interrupt: c00 at 0x8fa8f4
LR = 0x8fa8cc
The buggy address belongs to the page:
page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
flags: 0x0()
raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
^
d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit
f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to powerpc architecture too.
As Andrey Ryabinin said, get_wchan() is racy by design, it may
access volatile stack of running task, thus it may access
redzone in a stack frame and cause KASAN to warn about this.
Use READ_ONCE_NOCHECK() to silence these warnings.
Reported-by: Wanming Hu <huwanming@huaweil.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121014418.155675-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 77fc95f8c0dc9e1f8e620ec14d2fb65028fb7adc upstream.
Rather than accounting in bytes and multiplying (shifting), we can just
account in bits and avoid the shift. The main motivation for this is
there are other patches in flux that expand this code a bit, and
avoiding the duplication of "* 8" everywhere makes things a bit clearer.
Cc: stable@vger.kernel.org
Fixes: 12e45a2a6308 ("random: credit architectural init the exact amount")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39e0f991a62ed5efabd20711a7b6e7da92603170 upstream.
add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.
Cc: stable@vger.kernel.org
Fixes: 428826f5358c ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
