IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ]
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ]
We've found the AUX channel to be less reliable with PCLK_EDP at a
higher rate (typically 25 MHz). This is especially important on systems
with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant
use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause
"problems between syncing the PHY an PCLK", which leads to all sorts of
unreliabilities around register operations.
Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ]
The Gru-Bob board does not have a pull-up resistor on its
WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel
specified the pin configuration correctly as a pull-up, but this didn't
get ported correctly to upstream.
This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent
wakeup behavior.
Note that bt_host_wake_l has a similar dynamic, but apparently the
upstream choice was to redundantly configure both internal and external
pull-up on Kevin (see the "Kevin has an external pull up" comment in
rk3399-gru.dtsi). This doesn't cause any functional problem, although
it's perhaps wasteful.
Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75d18cecbb3805895d8ed64da4f78575ec96043 ]
Though acpi_find_last_cache_level() always returned signed value and the
document states it will return any errors caused by lack of a PPTT table,
it never returned negative values before.
Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
however changed it by returning -ENOENT if no PPTT was found. The value
returned from acpi_find_last_cache_level() is then assigned to unsigned
fw_level.
It will result in the number of cache leaves calculated incorrectly as
a huge value which will then cause the following warning from __alloc_pages
as the order would be great than MAX_ORDER because of incorrect and huge
cache leaves value.
| WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73
| pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __alloc_pages+0x74/0x314
| lr : alloc_pages+0xe8/0x318
| Call trace:
| __alloc_pages+0x74/0x314
| alloc_pages+0xe8/0x318
| kmalloc_order_trace+0x68/0x1dc
| __kmalloc+0x240/0x338
| detect_cache_attributes+0xe0/0x56c
| update_siblings_masks+0x38/0x284
| store_cpu_topology+0x78/0x84
| smp_prepare_cpus+0x48/0x134
| kernel_init_freeable+0xc4/0x14c
| kernel_init+0x2c/0x1b4
| ret_from_fork+0x10/0x20
Fix the same by changing fw_level to be signed integer and return the
error from init_cache_level() early in case of error.
Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fac76f2260893dde5aa05bb693b4c13e8ed0454b ]
Otherwise, we could fail to compile.
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_exit':
ghash-ce-glue.c:(.exit.text+0x24): undefined reference to 'crypto_unregister_aead'
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_init':
ghash-ce-glue.c:(.init.text+0x34): undefined reference to 'crypto_register_aead'
Fixes: 537c1445ab0b ("crypto: arm64/gcm - implement native driver using v8 Crypto Extensions")
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98e6e683632386a3bd284acda4342e68aec4c41 ]
The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.
The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.
The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8eb2df19fbf97aa1e950cf491232c2e3bef8357 ]
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39961659ffc3c3a9e3d0d43b0476547b5f35d49 ]
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af483947d472eccb79e42059276c4deed76f99a6 ]
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.
Co-developed-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220128090324.2727688-1-hewenliang4@huawei.com
Link: https://lore.kernel.org/r/9A004C03-250B-46C5-BF39-782D7551B00E@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de6921856f99c11d3986c6702d851e1328d4f7f6 ]
Enable tracing of the execve*() system calls with the
syscalls:sys_exit_execve tracepoint by removing the call to
forget_syscall() when starting a new thread and preserving the value of
regs->syscallno across exec.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220608162447.666494-2-flaniel@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fe17b91a7777df140d0f1433991da67ba658796c upstream.
An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".
Cc: stable@vger.kernel.org
Fixes: d7b9beb830d7 ("arm64: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c50f11c6196f45c92ca48b16a5071615d4ae0572 upstream.
Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers
When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:
(1) If the DMA transfer does not write to every byte in the buffer,
then the unwritten bytes will contain stale data once the transfer
has completed.
(2) If the buffer has a virtual alias in userspace, then stale data
may be visible via this alias during the period between performing
the cache invalidation and the DMA writes landing in memory.
Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ee31a3aa8f490c6507bc4294df6b70bed1c593e upstream.
Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") enabled
using kprobes from early_initcall. Unfortunately at this point the
hardware debug infrastructure is not operational. The OS lock may still
be locked, and the hardware watchpoints may have unknown values when
kprobe enables debug monitors to single-step instructions.
Rather than using hardware single-step, append a BRK instruction after
the instruction to be executed out-of-line.
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20201103134900.337243-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ]
The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.
This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.
If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.
If an in-range branch were erroeously rejected, then:
* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
use of a PLT entry, which is benign.
Note that this is the common case, as this is selected by
CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
which distributions typically seelct. This is also selected by
CONFIG_ARM64_ERRATUM_843419.
* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
internal ftrace failures.
* For core kernel text, this would result in internal ftrace failues.
Note that for this to happen, the kernel text would need to be at
least 128M bytes in size, and typical configurations are smaller tha
this.
Fix this by calculating the offset *from* the branch *to* the target in
both functions.
Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f3b29c65bb2fe0d47c2945cd0b4087be1c5218 ]
syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]
There was no repro yet on this bug, but I think
that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.
bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.
My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.
It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.
I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.
[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:89
check_heap_object mm/usercopy.c:186 [inline]
__check_object_size mm/usercopy.c:252 [inline]
__check_object_size+0x198/0x36c mm/usercopy.c:214
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_to_user include/linux/uaccess.h:159 [inline]
bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
__sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
__do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
__arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)
Fixes: db496944fdaa ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4efc851c36e389f7ed432edac0149acc5f94b0c7 ]
Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.
Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.
These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].
Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503134541.2566457-1-daniel.thompson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]
If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().
arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:
[ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]
which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.
Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:
[ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]
which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.
*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 260364d112bc822005224667c0c9b1b17a53eafd upstream.
The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is covered by the linear map. The memory map
may be present for NOMAP memory regions, but they won't be mapped in the
linear mapping. Accessing such regions via __va() when they are
memremap()'ed will cause a crash.
On v5.4.y the crash happens on qemu-arm with UEFI [1]:
<1>[ 0.084476] 8<--- cut here ---
<1>[ 0.084595] Unable to handle kernel paging request at virtual address dfb76000
<1>[ 0.084938] pgd = (ptrval)
<1>[ 0.085038] [dfb76000] *pgd=5f7fe801, *pte=00000000, *ppte=00000000
...
<4>[ 0.093923] [<c0ed6ce8>] (memcpy) from [<c16a06f8>] (dmi_setup+0x60/0x418)
<4>[ 0.094204] [<c16a06f8>] (dmi_setup) from [<c16a38d4>] (arm_dmi_init+0x8/0x10)
<4>[ 0.094408] [<c16a38d4>] (arm_dmi_init) from [<c0302e9c>] (do_one_initcall+0x50/0x228)
<4>[ 0.094619] [<c0302e9c>] (do_one_initcall) from [<c16011e4>] (kernel_init_freeable+0x15c/0x1f8)
<4>[ 0.094841] [<c16011e4>] (kernel_init_freeable) from [<c0f028cc>] (kernel_init+0x8/0x10c)
<4>[ 0.095057] [<c0f028cc>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
On kernels v5.10.y and newer the same crash won't reproduce on ARM because
commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") changed the way memory regions are registered in
the resource tree, but that merely covers up the problem.
On ARM64 memory resources registered in yet another way and there the
issue of wrong usage of pfn_valid() to ensure availability of the linear
map is also covered.
Implement arch_memremap_can_ram_remap() on ARM and ARM64 to prevent access
to NOMAP regions via the linear mapping in memremap().
Link: https://lore.kernel.org/all/Yl65zxGgFzF1Okac@sirena.org.uk
Link: https://lkml.kernel.org/r/20220426060107.7618-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]
The ROHM BD71847 PMIC has a 32.768 kHz clock.
Describe the PMIC clock to fix the following boot errors:
bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]
Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]
Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c0b0fbe01419f8f5d1c0b9c581631f34ffce8b ]
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 01f6c7338ce267959975da65d86ba34f44d54220 upstream.
Currently the first thing checked is whether the PCSI cpu_suspend function
has been initialized.
Another change will be overloading `acpi_processor_ffh_lpi_probe` and
calling it sooner. So make the `has_lpi` check the first thing checked
to prepare for that change.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4013e26670c590944abdab56c4fa797527b74325 upstream.
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218081209.354383-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
[nathan: Fix conflicts due to lack of 596b0474d3d9]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31a099dbd91e69fcab55eef4be15ed7a8c984918 upstream.
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
Fixes: ae16480785de ("arm64: introduce interfaces to hotpatch kernel and module code")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220407073323.743224-2-guoren@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dda7596c109fc382876118627e29db7607cde35d ]
insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in
instruction granularity instead of bytes granularity, but BPF line info
requires byte offset.
bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before
it is freed, so convert the offset into byte-offset before calling into
bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.
Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220226121906.5709-3-houtao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68e4f238b0e9d3670a1612ad900a6e98b2b3f7dd ]
BPF line info needs ctx->offset to be the instruction offset in the whole JITed
image instead of the body itself, so also call build_prologue() first in first
JIT pass.
Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220226121906.5709-2-houtao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ]
A label reference without brackets is a path string, not a phandle as
intended. Add the missing brackets.
Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399")
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220304202559.317749-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ]
After converting ahci-platform txt binding to yaml nodename is reported
as not matching the standard:
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml:
ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'
Fix it to match binding.
Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ]
Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.
Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2)
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: Ray Jui <rjui@broadcom.com>
CC: Scott Branden <sbranden@broadcom.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f34b43e07cb512b28543fdcb9f35d1fbfda9ebc ]
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Fixes: bd09128d16fa ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
__sdei_asm_trampoline_next_handler shouldn't have its own name as the
tramp_data_read_var takes the symbol name, and generates the name for
the value in the data page if CONFIG_RANDOMIZE_BASE is clear.
This means when CONFIG_RANDOMIZE_BASE is clear, this code won't compile
as __sdei_asm_trampoline_next_handler doesn't exist.
Use the proper name, and let the macro do its thing.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 268a491aebc25e6dc7c618903b09ac3a2e8af530 ]
The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ]
There are signal integrity issues running the eMMC at 200MHz on Puma
RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the
frequency to 100MHz made the eMMC much more stable, so let's lower the
frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only
100MHz was extensively tested.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 228a26b912287934789023b4132ba76065d9491c upstream.
Future CPUs may implement a clearbhb instruction that is sufficient
to mitigate SpectreBHB. CPUs that implement this instruction, but
not CSV2.3 must be affected by Spectre-BHB.
Add support to use this instruction as the BHB mitigation on CPUs
that support it. The instruction is in the hint space, so it will
be treated by a NOP as older CPUs.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[ modified for stable: Use a KVM vector template instead of alternatives,
removed bitmap of mitigations ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a5905d6af492ee6a4a2205f0d550b3f931b03d03 upstream.
KVM allows the guest to discover whether the ARCH_WORKAROUND SMCCC are
implemented, and to preserve that state during migration through its
firmware register interface.
Add the necessary boiler plate for SMCCC_ARCH_WORKAROUND_3.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[ kvm code moved to virt/kvm/arm. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 558c303c9734af5a813739cd284879227f7297d2 upstream.
Speculation attacks against some high-performance processors can
make use of branch history to influence future speculation.
When taking an exception from user-space, a sequence of branches
or a firmware call overwrites or invalidates the branch history.
The sequence of branches is added to the vectors, and should appear
before the first indirect branch. For systems using KPTI the sequence
is added to the kpti trampoline where it has a free register as the exit
from the trampoline is via a 'ret'. For systems not using KPTI, the same
register tricks are used to free up a register in the vectors.
For the firmware call, arch-workaround-3 clobbers 4 registers, so
there is no choice but to save them to the EL1 stack. This only happens
for entry from EL0, so if we take an exception due to the stack access,
it will not become re-entrant.
For KVM, the existing branch-predictor-hardening vectors are used.
When a spectre version of these vectors is in use, the firmware call
is sufficient to mitigate against Spectre-BHB. For the non-spectre
versions, the sequence of branches is added to the indirect vector.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org> # <v5.17.x 72bb9dcb6c33c arm64: Add Cortex-X2 CPU part definition
Cc: <stable@kernel.org> # <v5.16.x 2d0d656700d67 arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
Cc: <stable@kernel.org> # <v5.10.x 8a6b88e66233f arm64: Add part number for Arm Cortex-A77
[ modified for stable, moved code to cpu_errata.c removed bitmap of
mitigations, use kvm template infrastructure ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM writes the Spectre-v2 mitigation template at the beginning of each
vector when a CPU requires a specific sequence to run.
Because the template is copied, it can not be modified by the alternatives
at runtime.
Add templates for calling ARCH_WORKAROUND_3 and one for each value of K
in the brancy-loop. Instead of adding dummy functions for 'fn', which would
disable the Spectre-v2 mitigation, add template_start to indicate that a
template (and which one) is in use. Finally add a copy of
install_bp_hardening_cb() that is able to install these.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dee435be76f4117410bbd90573a881fd33488f37 upstream.
Speculation attacks against some high-performance processors can
make use of branch history to influence future speculation as part of
a spectre-v2 attack. This is not mitigated by CSV2, meaning CPUs that
previously reported 'Not affected' are now moderately mitigated by CSV2.
Update the value in /sys/devices/system/cpu/vulnerabilities/spectre_v2
to also show the state of the BHB mitigation.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[ code move to cpu_errata.c for backport ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bd09128d16fac3c34b80bd6a29088ac632e8ce09 upstream.
The Spectre-BHB workaround adds a firmware call to the vectors. This
is needed on some CPUs, but not others. To avoid the unaffected CPU in
a big/little pair from making the firmware call, create per cpu vectors.
The per-cpu vectors only apply when returning from EL0.
Systems using KPTI can use the canonical 'full-fat' vectors directly at
EL1, the trampoline exit code will switch to this_cpu_vector on exit to
EL0. Systems not using KPTI should always use this_cpu_vector.
this_cpu_vector will point at a vector in tramp_vecs or
__bp_harden_el1_vectors, depending on whether KPTI is in use.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b28a8eebe81c186fdb1a0078263b30576c8e1f42 upstream.
The trampoline code needs to use the address of symbols in the wider
kernel, e.g. vectors. PC-relative addressing wouldn't work as the
trampoline code doesn't run at the address the linker expected.
tramp_ventry uses a literal pool, unless CONFIG_RANDOMIZE_BASE is
set, in which case it uses the data page as a literal pool because
the data page can be unmapped when running in user-space, which is
required for CPUs vulnerable to meltdown.
Pull this logic out as a macro, instead of adding a third copy
of it.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ba2689234be92024e5635d30fe744f4853ad97db upstream.
Some CPUs affected by Spectre-BHB need a sequence of branches, or a
firmware call to be run before any indirect branch. This needs to go
in the vectors. No CPU needs both.
While this can be patched in, it would run on all CPUs as there is a
single set of vectors. If only one part of a big/little combination is
affected, the unaffected CPUs have to run the mitigation too.
Create extra vectors that include the sequence. Subsequent patches will
allow affected CPUs to select this set of vectors. Later patches will
modify the loop count to match what the CPU requires.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aff65393fa1401e034656e349abd655cfe272de0 upstream.
kpti is an optional feature, for systems not using kpti a set of
vectors for the spectre-bhb mitigations is needed.
Add another set of vectors, __bp_harden_el1_vectors, that will be
used if a mitigation is needed and kpti is not in use.
The EL1 ventries are repeated verbatim as there is no additional
work needed for entry from EL1.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a9c406e6462ff14956d690de7bbe5131a5677dc9 upstream.
Adding a second set of vectors to .entry.tramp.text will make it
larger than a single 4K page.
Allow the trampoline text to occupy up to three pages by adding two
more fixmap slots. Previous changes to tramp_valias allowed it to reach
beyond a single page.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
