IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit bfa659177dcba48cf13f2bd88c1972f12a60bf1c ]
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.
To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.
Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4e7dfe4ffc9ca50c6875757bd119abfe22b5c5 ]
The ipr_log_vpd_compact() function triggers a fortified memcpy() warning
about a potential string overflow with all versions of clang:
In file included from drivers/scsi/ipr.c:43:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
^
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
2 errors generated.
I don't see anything actually wrong with the function, but this is the only
instance I can reproduce of the fortification going wrong in the kernel at
the moment, so the easiest solution may be to rewrite the function into
something that does not trigger the warning.
Instead of having a combined buffer for vendor/device/serial strings, use
three separate local variables and just truncate the whitespace
individually.
Link: https://lore.kernel.org/r/20230214132831.2118392-1-arnd@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Fixes: 8cf093e275d0 ("[SCSI] ipr: Improved dual adapter errors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 578797f0c8cbc2e3ec5fc0dab87087b4c7073686 upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses]
Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013
When edev->components is zero, accessing edev->component[0] members is
wrong.
Link: https://lore.kernel.org/r/20230202162451.15346-5-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b4f5028e493cb353a5c8f5c45073eeea0303abd upstream.
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page.
Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fe97ff3d94934649abb0652028dd7296170c8d0 upstream.
An enclosure with no components can't usefully be operated by the driver
(since effectively it has nothing to manage), so report the problem and
don't attach. Not attaching also fixes an oops which could occur if the
driver tries to manage a zero component enclosure.
[mkp: Switched to KERN_WARNING since this scenario is common]
Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com
Cc: stable@vger.kernel.org
Reported-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fbc74feb642deb688cc97f76d40b7287ddd4cb1 upstream.
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c75e6aef5039830cce5d4cf764dd204522f89e6b upstream.
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1ae65c082f74536ec292b15766f2846f0238373 upstream.
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a4f ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32fe45274edb5926abc0fac7263d9f889d02d9cf ]
Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4fd63f42647110c963d4bfcd526ac48f5a5faff ]
This reverts commit 7e70aa789d4a0c89dbfbd2c8a974a4df717475ec.
Now that we have the patches ("blk-mq: In blk_mq_dispatch_rq_list()
"no budget" is a reason to kick") and ("blk-mq: Rerun dispatching in
the case of budget contention") we should no longer need the fix in
the SCSI code. Revert it, resolving conflicts with other patches that
have touched this code.
With this revert (and the two new patches) I can run the script that
was in commit 7e70aa789d4a ("scsi: core: run queue if SCSI device
queue isn't ready and queue is idle") in a loop with no failure. If I
do this revert without the two new patches I can easily get a failure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c31e76bcc379 ("blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f484a794e4ee2a9ce61f52a78e810ac45f3fe3b3 ]
If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails,
userspace could be accessing the host's ipaddress attr. If we then free the
session via iscsi_session_teardown() while userspace is still accessing the
session we will hit a use after free bug.
Set the tcp_sw_host->session after we have completed session creation and
can no longer fail.
Link: https://lore.kernel.org/r/20230117193937.21244-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15600159bcc6abbeae6b33a849bef90dca28b78f ]
This reverts commit 948e922fc44611ee2de0c89583ca958cb5307d36.
Not all targets that return PQ=1 and PDT=0 should be ignored. While
the SCSI spec is vague in this department, there appears to be a
critical mass of devices which rely on devices being accessible with
this combination of reported values.
Fixes: 948e922fc446 ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT")
Link: https://lore.kernel.org/r/yq1lelrleqr.fsf@ca-mkp.ca.oracle.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin Wilck <mwilck@suse.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbbd25499100c810ceaf5193c3cfcab9f7402a33 ]
The 'h' is a pointer to struct ctlr_info, so it's just 4 or 8 bytes, while
the structure itself is much bigger.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: edd163687ea5 ("hpsa: add driver for HP Smart Array controllers.")
Link: https://lore.kernel.org/r/20230118031255.GE15213@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ]
Currently the driver sets the port invalid if one phy in the port is not
enabled, which may cause issues in expander situation. In directly attached
situation, if phy up doesn't occur in time when refreshing port id, the
port is incorrectly set to invalid which will also cause disk lost.
Therefore set a port invalid only if there are no devices attached to the
port.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e118df492320176af94deec000ae034cc92be754 ]
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free().
Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ]
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ]
If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().
The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.
The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().
Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ]
If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed. Address this by calling
sas_rphy_free() in the error path.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ]
hpsa_sas_port_add_phy() does:
...
sas_phy_add() -> may return error here
sas_port_add_phy()
...
Whereas hpsa_free_sas_phy() does:
...
sas_port_delete_phy()
sas_phy_delete()
...
If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be
called to free the memory because the port and the phy have not been added
yet.
Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel
crash in this case.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ]
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
scsih_remove+0xd8/0x420 [mpt3sas]
Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens.
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ]
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.
Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.
Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2331ce6126be8864b39490e705286b66e2344aac ]
Userspace can currently write to sysfs to transition sdev_state to RUNNING
or OFFLINE from any source state. This causes issues because proper
transitioning out of some states involves steps besides just changing
sdev_state, so allowing userspace to change sdev_state regardless of the
source state can result in inconsistencies; e.g. with ISCSI we can end up
with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any
task attempting I/O on the device will then hang, and in more recent
kernels, iscsid will hang as well.
More detail about this bug is provided in my first attempt:
https://groups.google.com/g/open-iscsi/c/PNKca4HgPDs/m/CXaDkntOAQAJ
Link: https://lore.kernel.org/r/20220924000241.2967323-1-ushankar@purestorage.com
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Suggested-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".
We shouldn't disable a device that failed to be enabled. A simple return is
fine.
Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46ba53c30666717cb06c2b3c5d896301cd00d0c0 ]
When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:
(thread 1) | (thread 2)
smp_execute_task_sg() | sas_task_internal_timedout()
... |
del_timer() |
... | ...
sas_free_task(task) |
kfree(task->slow_task) //FREE|
| task->slow_task->... //USE
Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure
the timer handler have finished before the "task->slow_task" is
deallocated.
Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream.
The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage. Switch things to be statically allocated which will fill the
unused fields with 0 automatically.
Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]
In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.
There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.
The KASAN logs are as follows:
[ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[ 2.312969]
[ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 2.312969] Call Trace:
[ 2.312969] dump_stack_lvl+0x59/0x7b
[ 2.312969] print_address_description+0x7c/0x3b0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] __kasan_report+0x160/0x1c0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] kasan_report+0x4b/0x70
[ 2.312969] ? kobject_put+0x25d/0x290
[ 2.312969] kasan_check_range+0x2ca/0x310
[ 2.312969] __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0
[ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120
[ 2.312969] ? rpm_resume+0xa5c/0x16e0
[ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160
[ 2.312969] local_pci_probe+0x13c/0x1f0
[ 2.312969] pci_device_probe+0x37e/0x6c0
Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da6d507f5ff328f346b3c50e19e19993027b8ffd upstream.
Add the missing destroy_workqueue() before return from
lpfc_sli4_driver_resource_setup() in the error path.
Link: https://lore.kernel.org/r/20220823044237.285643-1-yangyingliang@huawei.com
Fixes: 3cee98db2610 ("scsi: lpfc: Fix crash on driver unload in wq free")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream.
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ]
Malformed user input to debugfs results in buffer overflow crashes. Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3455607fd7be10b449f5135c00dc306b85dc0d21 upstream.
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com
Cc: <stable@vger.kernel.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f260694e6463b63ae550aad25ddefe94cb1904da upstream.
Clear wait for mailbox interrupt flag to prevent stale mailbox:
Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps).
Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ...
To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging
the mailbox. When the stale mailbox completion does arrive, it will be
dropped.
Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com
Fixes: b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request")
Cc: Naresh Bannoth <nbannoth@in.ibm.com>
Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Cc: stable@vger.kernel.org
Reported-by: Naresh Bannoth <nbannoth@in.ibm.com>
Tested-by: Naresh Bannoth <nbannoth@in.ibm.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47ccb113cead905bdc236571bf8ac6fed90321b3 upstream.
A direct attach tape device, when gets swapped with another, was not
discovered. Fix this by looking at loop map and reinitialize link if there
are devices present.
Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/
Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: Tony Battersby <tonyb@cybernetics.com>
Tested-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 69695aeaa6621bc49cdd7a8e5a8d1042461e496e ]
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 673235f915318ced5d7ec4b2bfd8cb909e6a4a55 upstream.
When queuing I/O request to LLD, STS_RESOURCE may be returned because:
- Host is in recovery or blocked
- Target queue throttling or target is blocked
- LLD rejection
In these scenarios BLK_STS_DEV_RESOURCE is returned to the block layer to
avoid an unnecessary re-run of the queue. However, all of the requests
queued to this SCSI device may complete immediately after reading
'sdev->device_busy' and BLK_STS_DEV_RESOURCE is returned to block layer. In
that case the current I/O won't get a chance to get queued since it is
invisible at that time for both scsi_run_queue_async() and blk-mq's
RESTART.
Fix the issue by not returning BLK_STS_DEV_RESOURCE in this situation.
Link: https://lore.kernel.org/r/20201202100419.525144-1-ming.lei@redhat.com
Fixes: 86ff7c2a80cd ("blk-mq: introduce BLK_STS_DEV_RESOURCE")
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Long Li <longli@microsoft.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: "chenxiang (M)" <chenxiang66@hisilicon.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.
Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d64c491911322af1dcada98e5b9ee0d87e8c8fee ]
Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.
Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7e9c0c1ec05f18d320ecc8a31eec59d2af1af9 ]
NVMe Asynchronous Event Request commands have no command timeout value per
specifications.
Set WQE option to allow a reduced FLUSH polling rate for I/O error
detection specifically for nvme_admin_async_event commands.
Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 336d63615466b4c06b9401c987813fd19bdde39b ]
After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The
target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001. The target then sends a
LOGO to the fabric DID. lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps. The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.
Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.
Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf71d59c2eceadfcde0fb52e237990a0909880d7 ]
vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.
Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com
Signed-off-by: Wentao Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f0a46141e2e39bedb4779c88380d1b5f018c14 ]
When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.
Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
