IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit f5f390a77f18eaeb2c93211a1b7c5e66b5acd423 ]
The 'local-bd-address' property is used to pass a unique Bluetooth
device address from the boot firmware to the kernel and should otherwise
be left unset so that the OS can prevent the controller from being used
until a valid address has been provided through some other means (e.g.
using btmgmt).
Fixes: 60f77ae7d1c1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dfe6d190f38fc5df5ff2614b463a5195a399c885 upstream.
It appears that we don't allow a vcpu to be restored in AArch32
System mode, as we *never* included it in the list of valid modes.
Just add it to the list of allowed modes.
Fixes: 0d854a60b1d7 ("arm64: KVM: enable initialization of a 32bit vcpu")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 428a575dc9038846ad259466d5ba109858c0a023 upstream.
During boot, Linux kernel complains:
[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.
With this patch:
[ 0.000000] GIC: Using split EOI/Deactivate mode
So this should be the correct fix.
Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219-cache-v3-1-a33c57534ae9@outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream.
There is no such device as "as3722@40", because its name is "pmic". Use
phandles for aliases to fix relying on full node path. This corrects
aliases for RTC devices and also fixes dtc W=1 warning:
tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40)
Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ffbf4fb9b5c12ff878a10ea17997147ea4ebea6f ]
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: d0ffffe0 910003fd 91000000 9400000b (d4210000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: BRK handler: Fatal exception
Fix this by always aligning the end of a bug_entry to 4 bytes, which is
correct regardless of CONFIG_DEBUG_BUGVERBOSE.
Fixes: 9fb7410f955f ("arm64/BUG: Use BRK instruction for generic BUG traps")
Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com>
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0ac10b291bee84b00bf9fb2afda444e77e7f88f4 upstream.
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells'
size of the parent interrupt controller (the GIC) is not accounted for.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ac417b8f124427c90ec8c2ef4f632b821d924cc upstream.
Q7_THRM# pin is connected to a diode on the module which is used
as a level shifter, and the pin have a pull-down enabled by
default. We need to configure it to internal pull-up, other-
wise whenever the pin is configured as INPUT and we try to
control it externally the value will always remain zero.
Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240308085243.69903-1-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3baac7291effb501c4d52df7019ebf52011e5772 ]
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecb5b0034f5bcc35003b4b965cf50c6e98316e79 ]
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 800dc93c3941e372c94278bf4059e6e82f60bd66 ]
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 945a7c8570916650a415757d15d83e0fa856a686 ]
The PCIE_WAKE# has a diode used as a level-shifter, and is used as an
input pin. While the SoC default is to enable the pull-up, the core
rk3399 pinconf for this pin opted for pull-none. So as to not disturb
the behaviour of other boards which may rely on pull-none instead of
pull-up, set the needed pull-up only for RK3399 Puma.
Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-2-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0abb4b2c7acf3c3e4130dc3f54cd90cf2ae62bc ]
Nodes overridden by their reference should be ordered alphabetically to
make it easier to read the DTS. pinctrl node is defined in the wrong
location so let's reorder it.
Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308085243.69903-2-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: 945a7c857091 ("arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86f6d6225e5e546ffeaae6db597f4aabe50d26c1 ]
Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 68c4c20848d7 ("arm64: dts: qcom: msm8996: Define UFS UniPro clock limits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80884431430995254257848d1a05266a2b791c58 ]
Supplies for the various components in the SoC depends on board layout,
so move the supply definitions to db820c.dtsi instead of carrying them
in the platform dtsi.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 68c4c20848d7 ("arm64: dts: qcom: msm8996: Define UFS UniPro clock limits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f978d45b4aaba6c8e9ad2406147be67f8f733c42 ]
The USB id pins and wlan regulator are not platform devices, so move
them out of /soc
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 68c4c20848d7 ("arm64: dts: qcom: msm8996: Define UFS UniPro clock limits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99d100e00144bc01b49a697f4bc4398f2f7e7ce4 ]
This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: /: memory@40000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: /: memory@40000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240122132357.31264-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 204f9ed4bad6293933179517624143b8f412347c ]
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5458d6f2827cd30218570f266b8d238417461f2f ]
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae5ee3562a2519214b12228545e88a203dd68bbd ]
out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fca8a117c1c9a0f8b8feed117db34cf58134dc2c upstream.
The rtc on the mox shares its interrupt line with the moxtet bus. Set
the interrupt type to be consistent between both devices. This ensures
correct setup of the interrupt line regardless of probing order.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Fixes: 21aad8ba615e ("arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c90c75e663246203a2b7f6dd9e08a110f4c3c43 ]
There is no "panic-indicator" default trigger but a property with that
name:
sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3c0696076aad60a2f04c019761921954579e1b0e upstream.
It is currently possible for a userspace application to enter an
infinite page fault loop when using HugeTLB pages implemented with
contiguous PTEs when HAFDBS is not available. This happens because:
1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean
(PTE_DIRTY | PTE_RDONLY | PTE_WRITE).
2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling
the memory access on a system without HAFDBS, we will get a page
fault.
3. HugeTLB will check if it needs to update the dirty bits on the PTE.
For contiguous PTEs, it will check to see if the pgprot bits need
updating. In this case, HugeTLB wants to write a sequence of
sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about
to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()),
so it thinks no update is necessary.
We can get the kernel to write a sw-dirty, hw-clean PTE with the
following steps (showing the relevant VMA flags and pgprot bits):
i. Create a valid, writable contiguous PTE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE
ii. mprotect the VMA to PROT_NONE.
VMA vmflags: VM_SHARED
VMA pgprot bits: PTE_RDONLY
PTE pgprot bits: PTE_DIRTY | PTE_RDONLY
iii. mprotect the VMA back to PROT_READ | PROT_WRITE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY
Make it impossible to create a writeable sw-dirty, hw-clean PTE with
pte_modify(). Such a PTE should be impossible to create, and there may
be places that assume that pte_dirty() implies pte_hw_dirty().
Signed-off-by: James Houghton <jthoughton@google.com>
Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags")
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24165c5dad7ba7c7624d05575a5e0cc851396c71 upstream.
Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators
by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0
and regulator-usb-p1.
Cc: stable@vger.kernel.org
Fixes: c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver")
Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a upstream.
dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
fix by adding the address into the node name.
Cc: stable@vger.kernel.org
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c854188ea01062f5a5fd7f05658feb1863774eaa upstream.
We currently expose the PMU version of the host to the guest via
emulation of the DFR0_EL1 and AA64DFR0_EL1 debug feature registers.
However many of the features offered beyond PMUv3 for 8.1 are not
supported in KVM. Examples of this include support for the PMMIR
registers (added in PMUv3 for ARMv8.4) and 64-bit event counters
added in (PMUv3 for ARMv8.5).
Let's trap the Debug Feature Registers in order to limit
PMUVer/PerfMon in the Debug Feature Registers to PMUv3 for ARMv8.1
to avoid unexpected behaviour.
Both ID_AA64DFR0.PMUVer and ID_DFR0.PerfMon follow the "Alternative ID
scheme used for the Performance Monitors Extension version" where 0xF
means an IMPLEMENTATION DEFINED PMU is implemented, and values 0x0-0xE
are treated as with an unsigned field (with 0x0 meaning no PMU is
present). As we don't expect to expose an IMPLEMENTATION DEFINED PMU,
and our cap is below 0xF, we can treat these fields as unsigned when
applying the cap.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Mark: make field names consistent, use perfmon cap]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e35aa642ee4dab01b16cc4b2df59d1936f3b3c2 upstream.
When emulating ID registers there is often a need to cap the version
bits of a feature such that the guest will not use features that the
host is not aware of. For example, when KVM mediates access to the PMU
by emulating register accesses.
Let's add a helper that extracts a performance monitors ID field and
caps the version to a given value.
Fields that identify the version of the Performance Monitors Extension
do not follow the standard ID scheme, and instead follow the scheme
described in ARM DDI 0487E.a page D13-2825 "Alternative ID scheme used
for the Performance Monitors Extension version". The value 0xF means an
IMPLEMENTATION DEFINED PMU is present, and values 0x0-OxE can be treated
the same as an unsigned field with 0x0 meaning no PMU is present.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Mark: rework to handle perfmon fields]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In linux-6.1, the related code is refactored in commit 124c49b1b5d9
("arm64: armv8_deprecated: rework deprected instruction handling") and this
issue was incidentally fixed. I have adapted the patch set to linux stable
5.10. However, 4.19 and 5.10 are too different and the patch set is
hard to adapt to 4.19.
This patch is to solve the problem of repeated addition of linked lists
described below with few changes.
How to reproduce:
CONFIG_ARMV8_DEPRECATED=y, CONFIG_SWP_EMULATION=y, and CONFIG_DEBUG_LIST=y,
then launch two shell executions:
#!/bin/bash
while [ 1 ];
do
echo 1 > /proc/sys/abi/swp
done
or "echo 1 > /proc/sys/abi/swp" and then aunch two shell executions:
#!/bin/bash
while [ 1 ];
do
echo 0 > /proc/sys/abi/swp
done
In emulation_proc_handler(), read and write operations are performed on
insn->current_mode. In the concurrency scenario, mutex only protects
writing insn->current_mode, and not protects the read. Suppose there are
two concurrent tasks, task1 updates insn->current_mode to INSN_EMULATE
in the critical section, the prev_mode of task2 is still the old data
INSN_UNDEF of insn->current_mode. As a result, two tasks call
update_insn_emulation_mode twice with prev_mode = INSN_UNDEF and
current_mode = INSN_EMULATE, then call register_emulation_hooks twice,
resulting in a list_add double problem.
After applying this patch, the following list add or list del double
warnings never occur.
Call trace:
__list_add_valid+0xd8/0xe4
register_undef_hook+0x94/0x13c
update_insn_emulation_mode+0xd0/0x12c
emulation_proc_handler+0xd8/0xf4
proc_sys_call_handler+0x140/0x250
proc_sys_write+0x1c/0x2c
new_sync_write+0xec/0x18c
vfs_write+0x214/0x2ac
ksys_write+0x70/0xfc
__arm64_sys_write+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Call trace:
__list_del_entry_valid+0xac/0x110
unregister_undef_hook+0x34/0x80
update_insn_emulation_mode+0xf0/0x180
emulation_proc_handler+0x8c/0xd8
proc_sys_call_handler+0x1d8/0x208
proc_sys_write+0x14/0x20
new_sync_write+0xf0/0x190
vfs_write+0x304/0x388
ksys_write+0x6c/0x100
__arm64_sys_write+0x1c/0x28
el0_svc_common.constprop.4+0x68/0x188
do_el0_svc+0x24/0xa0
el0_svc+0x14/0x20
el0_sync_handler+0x90/0xb8
el0_sync+0x160/0x180
Fixes: af483947d472 ("arm64: fix oops in concurrently setting insn_emulation sysctls")
Cc: stable@vger.kernel.org#4.19.x
Cc: gregkh@linuxfoundation.org
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ]
Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.
Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:
# bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
Attaching 1 probe...
hit
hit
[...]
^C
(./test performs a single 4-byte store to 0x10000)
This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.
Signed-off-by: Tomislav Novak <tnovak@meta.com>
Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b6ea15c0a1122422b44bf6c47a3c22fc8d46777 ]
GCC and it's GDSCs are under the RPMh CX power domain. So let's add the
missing RPMh power domain to the GCC node.
Fixes: 6d4cf750d03a ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8ec8490a1950efeccb00967698cf7cb2fcd25ca7 upstream.
CONFIG_UBSAN_SHIFT with gcc-5 complains that the shifting of
ARM_CPU_IMP_AMPERE (0xC0) into bits [31:24] by MIDR_CPU_MODEL() is
undefined behavior. Well, sort of, it actually spells the error as:
arch/arm64/kernel/proton-pack.c: In function 'spectre_bhb_loop_affected':
arch/arm64/include/asm/cputype.h:44:2: error: initializer element is not constant
(((imp) << MIDR_IMPLEMENTOR_SHIFT) | \
^
This isn't an issue for other Implementor codes, as all the other codes
have zero in the top bit and so are representable as a signed int.
Cast the implementor code to unsigned in MIDR_CPU_MODEL to remove the
undefined behavior.
Fixes: 0e5d5ae837c8 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221102160106.1096948-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 upstream.
Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of
speculative execution across software contexts," the AMPERE1 core needs the
bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of
11.
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.com
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab9b4008092c86dc12497af155a0901cc1156999 ]
Both create_mapping_noalloc() and update_mapping_prot() sanity-check
their 'virt' parameter, but the check itself doesn't make much sense.
The condition used today appears to be a historical accident.
The sanity-check condition:
if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
... can only be true for the KASAN shadow region or the module region,
and there's no reason to exclude these specifically for creating and
updateing mappings.
When arm64 support was first upstreamed in commit:
c1cc1552616d0f35 ("arm64: MMU initialisation")
... the condition was:
if (virt < VMALLOC_START) {
[ ... warning here ... ]
return;
}
At the time, VMALLOC_START was the lowest kernel address, and this was
checking whether 'virt' would be translated via TTBR1.
Subsequently in commit:
14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
... the condition was changed to:
if ((virt >= VA_START) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
This appear to have been a thinko. The commit moved the linear map to
the bottom of the kernel address space, with VMALLOC_START being at the
halfway point. The old condition would warn for changes to the linear
map below this, and at the time VA_START was the end of the linear map.
Subsequently we cleaned up the naming of VA_START in commit:
77ad4ce69321abbe ("arm64: memory: rename VA_START to PAGE_END")
... keeping the erroneous condition as:
if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
Correct the condition to check against the start of the TTBR1 address
space, which is currently PAGE_OFFSET. This simplifies the logic, and
more clearly matches the "outside kernel range" message in the warning.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230615102628.1052103-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a2c4e5635177939a088d22fa35c6a7032725663 ]
The schematics are misleading, the flow control is for HSCIF1. We need
SCIF1 for GNSS/GPS which does not use flow control.
Fixes: c6c816e22bc8 ("arm64: dts: ulcb-kf: enable SCIF1")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230525084823.4195-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af6c0bd59f4f3ad5daad2f7b777954b1954551d5 ]
Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.
Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.
After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.
Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>
[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
is enabled addr at ffffa45c13d09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>
After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>
Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 554edc3e9239bb81e61be9f0f5dbbeb528a69e72 ]
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: 231d8908a66fa98f ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb76b0fae3ca880363214e1dcd6513ab8bd529e7 ]
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: dd7188eb4ed128dc ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
