IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 8873aab8646194a4446117bb617cc71bddda2dee ]
All these commands end up peeking into the PACA using the user
originated cpu id as an index. Check the cpu id is valid in order
to prevent xmon to crash. Instead of printing an error, this follows
the same behavior as the "lp s #" command : ignore the buggy cpu id
parameter and fall back to the #-less version of the command.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/161531347060.252863.10490063933688958044.stgit@bahia.lan
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be140f1732b523947425aaafbe2e37b41b622d96 ]
There is code that builds with calls to IO accessors even when
CONFIG_PCI=n, but the actual calls are guarded by runtime checks.
If not those calls would be faulting, because the page at virtual
address zero is (usually) not mapped into the kernel. As Arnd pointed
out, it is possible a large port value could cause the address to be
above mmap_min_addr which would then access userspace, which would be
a bug.
To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That
is a value chosen to point into unmapped space between the kernel and
userspace, so any access will always fault.
Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an
effect on 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03c0f2c2b2220fc9cf8785cd7b61d3e71e24a366 ]
With -Wextra clang warns about pointer arithmetic using a null pointer.
When building with CONFIG_PCI=n, that triggers a warning in the IO
accessors, eg:
In file included from linux/arch/powerpc/include/asm/io.h:672:
linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb'
591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
| ~~~~~~~~~~~~~~~~~~~~~ ^
That is because when CONFIG_PCI=n, _IO_BASE is defined as 0.
Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts
it to void * before the addition with port happens.
Instead the addition can be done first, and then the cast. The resulting
value will be the same, but avoids the warning, and also avoids void
pointer arithmetic which is apparently non-standard.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff2e185cf73df480ec69675936c4ee75a445c3e4 ]
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit
0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and
related changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408-pseries-hvcall-retbuf-v1-1-ebc73d7253cf@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d4341638516bf97b9a34947e0bd95035a8230a5 ]
Couple of Minor fixes:
- hcall return values are long. Fix that for h_get_mpp, h_get_ppp and
parse_ppp_data
- If hcall fails, values set should be at-least zero. It shouldn't be
uninitialized values. Fix that for h_get_mpp and h_get_ppp
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240412092047.455483-3-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01acaf3aa75e1641442cc23d8fe0a7bb4226efb1 ]
vmpic_msi_feature is only used conditionally, which triggers a rare
-Werror=unused-const-variable= warning with gcc:
arch/powerpc/sysdev/fsl_msi.c:567:37: error: 'vmpic_msi_feature' defined but not used [-Werror=unused-const-variable=]
567 | static const struct fsl_msi_feature vmpic_msi_feature =
Hide this one in the same #ifdef as the reference so we can turn on
the warning by default.
Fixes: 305bcf26128e ("powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcalls")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403080702.3509288-2-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 35f20786c481d5ced9283ff42de5c69b65e5ed13 upstream.
arch/powerpc/lib/xor_vmx.o is built with '-msoft-float' (from the main
powerpc Makefile) and '-maltivec' (from its CFLAGS), which causes an
error when building with clang after a recent change in main:
error: option '-msoft-float' cannot be specified with '-maltivec'
make[6]: *** [scripts/Makefile.build:243: arch/powerpc/lib/xor_vmx.o] Error 1
Explicitly add '-mhard-float' before '-maltivec' in xor_vmx.o's CFLAGS
to override the previous inclusion of '-msoft-float' (as the last option
wins), which matches how other areas of the kernel use '-maltivec', such
as AMDGPU.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1986
Link: 4792f912b2
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240127-ppc-xor_vmx-drop-msoft-float-v1-1-f24140e81376@kernel.org
[nathan: Fixed conflicts due to lack of 04e85bbf71c9 in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f491356b7149564ab22323ccce79c8d595bfd0c ]
Binutils 2.38 complains about the use of mfpmr when building
ppc6xx_defconfig:
CC arch/powerpc/kernel/pmc.o
{standard input}: Assembler messages:
{standard input}:45: Error: unrecognized opcode: `mfpmr'
{standard input}:56: Error: unrecognized opcode: `mtpmr'
This is because by default the kernel is built with -mcpu=powerpc, and
the mt/mfpmr instructions are not defined.
It can be avoided by enabling CONFIG_E300C3_CPU, but just adding that to
the defconfig will leave open the possibility of randconfig failures.
So add machine directives around the mt/mfpmr instructions to tell
binutils how to assemble them.
Cc: stable@vger.kernel.org
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-3-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]
Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:
arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ]
Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:
---Logs---
# perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]
# perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
Performance counter stats for 'system wide':
<not supported> hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
2.000700771 seconds time elapsed
The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.
Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.
Result after fix patch changes:
# perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.
Fixes: 220a0c609ad1 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f9abaa6d7de0a70fc68acaedce290c1f96e2e59 ]
Some of the fp/vmx code in sstep.c assume a certain maximum size for the
instructions being emulated. The size of those operations however is
determined separately in analyse_instr().
Add a check to validate the assumption on the maximum size of the
operations, so as to prevent any unintended kernel stack corruption.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d555b57ee660d8a871781c0eebf006e855e918d ]
The linux-next build of powerpc64 allnoconfig fails with:
arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw'
557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
| ^~~~~~~~~~~~~~~~~~~~~~
Caused by commit:
c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Fix it by moving the function definition under
CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only
called when CONFIG_TRANSPARENT_HUGEPAGE=y.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Flesh out change log from linux-next patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c3f243d4db24675b653f0568bb65dae34e6455 ]
With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with:
arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes]
1739 | unsigned long __init arch_reserved_kernel_pages(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h,
but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc
headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which
is not included into the generic headers when NUMA=n.
Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h
which is included regardless of NUMA=n.
Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to
also check for CONFIG_PRESERVE_FA_DUMP.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8d3555355653848082c351fa90775214fb8a4fa ]
With CONFIG_GENERIC_BUG=n the build fails with:
arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes]
1442 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only defined, and the function is only needed, when
CONFIG_GENERIC_BUG=y, so move the implementation under that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46c8a75263f97bda13c739ba1c90aced0d3b071 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231204023223.2447523-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is for linux-5.4.y only, it has no direct upstream
equivalent.
Prior to commit 5f2fb52fac15 ("kbuild: rename hostprogs-y/always to
hostprogs/always-y"), always-y did not exist, making the backport of
mainline commit 1b1e38002648 ("powerpc: add crtsavres.o to always-y
instead of extra-y") to linux-5.4.y as commit 245da9eebba0 ("powerpc:
add crtsavres.o to always-y instead of extra-y") incorrect, breaking the
build with linkers that need crtsavres.o:
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
Backporting the aforementioned kbuild commit is not suitable for stable
due to its size and number of conflicts, so transform the always-y usage
to an equivalent form using always, which resolves the build issues.
Fixes: 245da9eebba0 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e123015c0ba859cf48aa7f89c5016cc6e98e018d ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: b9ef7b4b867f ("powerpc: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8649829a1dd25199bbf557b2621cedb4bf9b3050 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 2717a33d6074 ("powerpc/opal-irqchip: Use interrupt names if present")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a260f2dd827bbc82cc60eb4f4d8c22707d80742 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd68ffce69f6cf8ddd3a3c32549d1d2275e49fc5 ]
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20e9de85edae3a5866f29b6cce87c9ec66d62a1b ]
When attempting to remove by index a set of LMBs a lot of messages are
displayed on the console, even when everything goes fine:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000002d
Offlined Pages 4096
pseries-hotplug-mem: Memory at 2d0000000 was hot-removed
The 2 messages prefixed by "pseries-hotplug-mem" are not really
helpful for the end user, they should be debug outputs.
In case of error, because some of the LMB's pages couldn't be
offlined, the following is displayed on the console:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000003e
pseries-hotplug-mem: Failed to hot-remove memory at 3e0000000
dlpar: Could not handle DLPAR request "memory remove index 0x8000003e"
Again, the 2 messages prefixed by "pseries-hotplug-mem" are useless,
and the generic DLPAR prefixed message should be enough.
These 2 first changes are mainly triggered by the changes introduced
in drmgr:
https://groups.google.com/g/powerpc-utils-devel/c/Y6ef4NB3EzM/m/9cu5JHRxAQAJ
Also, when adding a bunch of LMBs, a message is displayed in the console per LMB
like these ones:
pseries-hotplug-mem: Memory at 7e0000000 (drc index 8000007e) was hot-added
pseries-hotplug-mem: Memory at 7f0000000 (drc index 8000007f) was hot-added
pseries-hotplug-mem: Memory at 800000000 (drc index 80000080) was hot-added
pseries-hotplug-mem: Memory at 810000000 (drc index 80000081) was hot-added
When adding 1TB of memory and LMB size is 256MB, this leads to 4096
messages to be displayed on the console. These messages are not really
helpful for the end user, so moving them to the DEBUG level.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Tweak change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201211145954.90143-1-ldufour@linux.ibm.com
Stable-dep-of: bd68ffce69f6 ("powerpc/pseries/memhp: Fix access beyond end of drmem array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a74197b65e69c46fe6e53f7df2f4d6ce9ffe012 ]
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b1e38002648819c04773647d5242990e2824264 ]
crtsavres.o is linked to modules. However, as explained in commit
d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream.
Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
stack unwind") added use of a new stack frame on ftrace entry to fix
stack unwind. However, the commit missed updating the offset used while
tearing down the ftrace stack when ftrace is disabled. Fix the same.
In addition, the commit missed saving the correct stack pointer in
pt_regs. Update the same.
Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e1d824f9a283cbf90f25241b66d1f69adb3835b upstream.
During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.
Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.
Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.
Additional detail (mpe):
Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.
There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").
That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.
But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.
That path is:
interrupt_return_srr_user()
interrupt_exit_user_prepare()
interrupt_exit_user_prepare_main()
do_notify_resume()
get_signal()
task_work_run()
create_worker_cb()
create_io_worker()
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
if (tsk->thread.regs->msr & MSR_FP)
save_fpu()
# f0 is clobbered and potentially live in userspace
Note the above discussion applies equally to save_altivec().
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/
Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/
Tested-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ]
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ]
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7a60ab1e065257a0e467c13b519f4debcd7fcf ]
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854
Fixes: 88ec6b93c8e7 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d9cea8a552ee122e21fbd5a3c5d4eb85f648e06 ]
On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.
But then pte_user() returns 1 also for PAGE_NONE.
As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.
Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ]
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ]
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ]
fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses. struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.
This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses. pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:
BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
Read of size 4 at addr c000000264c26fdc by task swapper/0/1
Call Trace:
dump_stack_lvl+0x1bc/0x2b8 (unreliable)
print_report+0x3f4/0xc60
kasan_report+0x244/0x698
__asan_load4+0xe8/0x250
vga_arbiter_add_pci_device+0x60/0xe00
pci_notify+0x88/0x444
notifier_call_chain+0x104/0x320
blocking_notifier_call_chain+0xa0/0x140
device_add+0xac8/0x1d30
device_register+0x58/0x80
vio_register_device_node+0x9ac/0xce0
vio_bus_scan_register_devices+0xc4/0x13c
__machine_initcall_pseries_vio_device_init+0x94/0xf0
do_one_initcall+0x12c/0xaa8
kernel_init_freeable+0xa48/0xba8
kernel_init+0x64/0x400
ret_from_kernel_thread+0x5c/0x64
Fix this by creating separate notifier_block structs for each bus type.
Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1eb75e0dfed80d2d85b664e28a39f65b290ab55 ]
In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.
To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.
Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b51ba4fe2e134b631f9c8f45423707aab71449b5 upstream.
The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4037d1f1fc4e92b69d7196d4568c33078d465ea upstream.
core99_l2_cache/core99_l3_cache do not need to be marked as volatile,
remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200303085604.24952-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9451c79bc39e610882bdd12370f01af5004a3c4f upstream.
When building with ppc64_defconfig, the compiler reports
that these 2 variables are not used:
warning: unused variable 'core99_l2_cache' [-Wunused-variable]
warning: unused variable 'core99_l3_cache' [-Wunused-variable]
They are only used when CONFIG_PPC64 is not defined. Move
them into a section which does the same macro check.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
[mpe: Move them into core99_init_caches() which is their only user]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190920153951.25762-1-ilie.halip@gmail.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f3175979e62de3b929bfa54a0db4b87d36257a7 upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccb381e1af1ace292153c88eb1fffa5683d16a20 ]
As per the generic KASAN code in mm/kasan, disable KCOV with
KCOV_INSTRUMENT := n in the makefile.
This fixes a ppc64 boot hang when KCOV and KASAN are enabled.
kasan_early_init() gets called before a PACA is initialised, but the
KCOV hook expects a valid PACA.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230710044143.146840-1-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6722b25712054c0f903b839b8f5088438dd04df3 ]
altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.
Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e8328e5acbe691bbde029a52c89d70dcbc22f3 ]
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 61235b24b9cb37c13fcad5b9596d59a1afdcec30 upstream
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ea739ea1d4d3de41acc4f4eb2d1a97eee0eb75 upstream.
binutils v2.37 drops unused section symbols, which prevents recordmcount
from capturing mcount locations in sections that have no non-weak
symbols. This results in a build failure with a message such as:
Cannot find symbol for section 12: .text.perf_callchain_kernel.
kernel/events/callchain.o: failed
The change to binutils was reverted for v2.38, so this behavior is
specific to binutils v2.37:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c09c8b42021180eee9495bd50d8b35e683d3901b
Objtool is able to cope with such sections, so this issue is specific to
recordmcount.
Fail the build and print a warning if binutils v2.37 is detected and if
we are using recordmcount.
Cc: stable@vger.kernel.org
Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230530061436.56925-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 39f49684036d24af800ff194c33c7b2653c591d7 ]
In a randconfig with CONFIG_SERIAL_CPM=m and
CONFIG_PPC_EARLY_DEBUG_CPM=y, there is a build error:
ERROR: modpost: "udbg_putc" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!
Prevent the build error by allowing PPC_EARLY_DEBUG_CPM only when
SERIAL_CPM=y.
Fixes: c374e00e17f1 ("[POWERPC] Add early debug console for CPM serial ports.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230701054714.30512-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8eebc4a99f15280654f23e914e746c40a516e50 ]
Without this fix, the last subsection vmemmap can end up in memory even if
the namespace is created with -M mem and has sufficient space in the altmap
area.
Fixes: cf387d9644d8 ("libnvdimm/altmap: Track namespace boundaries in altmap")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com <mailto:sachinp@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616110826.344417-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1202cdd665315c525b5237e96e0bedc76d7e754f upstream.
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20188baceb7a1463dc0bcb0c8678b69c2f447df6 upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
