IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 0ae18a82686f9b9965a8ce0dd81371871b306ffe ]
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8b2e31555cf55ba3680fb28e2b382e168d7ea1 ]
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8b17653088f28a87c81845fa41a2d295a3b458c ]
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade ]
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 840835c9281215341d84966a8855f267a971e6a3 ]
Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.
After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b43e3a82bc432c1caaed8950e7662c143470c54c ]
In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.
To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123
This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message
With this patch we add additional check to make sure, related skb is own
echo message.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84f44df664e9f0e261157e16ee1acd77cc1bb78d ]
Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the
src_reg = dst_reg when reading the sk field of a sock_ops struct we
generate xlated code,
53: (61) r9 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
56: (79) r9 = *(u64 *)(r9 +0)
This stomps on the r9 reg to do the sk_fullsock check and then when
reading the skops->sk field instead of the sk pointer we get the
sk_fullsock. To fix use similar pattern noted in the previous fix
and use the temp field to save/restore a register used to do
sk_fullsock check.
After the fix the generated xlated code reads,
52: (7b) *(u64 *)(r9 +32) = r8
53: (61) r8 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
55: (79) r8 = *(u64 *)(r9 +32)
56: (79) r9 = *(u64 *)(r9 +0)
57: (05) goto pc+1
58: (79) r8 = *(u64 *)(r9 +32)
Here r9 register was in-use so r8 is chosen as the temporary register.
In line 52 r8 is saved in temp variable and at line 54 restored in case
fullsock != 0. Finally we handle fullsock == 0 case by restoring at
line 58.
This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge
this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a
bit more confusing than just adding a new macro despite a bit of
duplicating code.
Fixes: 1314ef561102e ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b428336676dbca363262cc134b6218205df4f530 ]
On big-endian machine, the returned register data when the exthdr is
present is not being compared correctly because little-endian is
assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval()
and nft_cmp_fast_init(), calls cpu_to_le32().
The following dump also shows that little endian is assumed:
$ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter
ip
[ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ]
[ cmp eq reg 1 0x01000000 ]
[ counter pkts 0 bytes 0 ]
Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when
RR option exists in the packet shows that the comparison fails because
the assumption:
nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0
nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000
v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the
warnings reported by kernel test robot.
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64d26422516b2e347b32e6d9b1d40b3c19a62aae ]
During a connection tear down, the Receive queue is flushed before
the device resources are freed. Typically, all the Receives flush
with IB_WR_FLUSH_ERR.
However, any pending successful Receives flush with IB_WR_SUCCESS,
and the server automatically posts a fresh Receive to replace the
completing one. This happens even after the connection has closed
and the RQ is drained. Receives that are posted after the RQ is
drained appear never to complete, causing a Receive resource leak.
The leaked Receive buffer is left DMA-mapped.
To prevent these late-posted recv_ctxt's from leaking, block new
Receive posting after XPT_CLOSE is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit af804b7826350d5af728dca4715e473338fbd7e5 upstream.
This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.
The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.
Bail out if no ml_priv is allocated.
Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd3b3636c99fcac52c598b64061f3fe4413c6a12 upstream.
The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.
If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).
Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.
This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.
Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5981fe5b0529ba25d95f37d7faa434183ad618c5 upstream.
This never was intended to be a 'while' loop, it should've
just been an 'if' instead of 'while'. Fix this.
I noticed this while applying another patch from Ben that
intended to fix a busy loop at this spot.
Cc: stable@vger.kernel.org
Fixes: b16798f5b907 ("mac80211: mark station unauthorized before key removal")
Reported-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9539752d23283db4692384a634034f451261e29 upstream.
Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 48a87cc26c13 ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067fc7 ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d76f3351cea2d927fdf70dd7c06898235035e84e ]
In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or
SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind
behaviour or in the incorrect reuse of a bind.
the kernel keeps track for each bind_bucket if all sockets in the
bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags.
These flags allow skipping the costly bind_conflict check when possible
(meaning when all sockets have the proper SO_REUSE option).
For every socket added to a bind_bucket, these flags need to be updated.
As soon as a socket that does not support reuse is added, the flag is
set to false and will never go back to true, unless the bind_bucket is
deleted.
Note that there is no mechanism to re-evaluate these flags when a socket
is removed (this might make sense when removing a socket that would not
allow reuse; this leaves room for a future patch).
For this optimization to work, it is mandatory that these flags are
properly initialized and updated.
When a child socket is created from a listen socket in
__inet_inherit_port, the TPROXY case could create a new bind bucket
without properly initializing these flags, thus preventing the
optimization to work. Alternatively, a socket not allowing reuse could
be added to an existing bind bucket without updating the flags, causing
bind_conflict to never be called as it should.
Call inet_csk_update_fastreuse when __inet_inherit_port decides to create
a new bind_bucket or use a different bind_bucket than the one of the
listen socket.
Fixes: 093d282321da ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62ffc589abb176821662efc4525ee4ac0b9c3894 ]
Refactor the fastreuse update code in inet_csk_get_port into a small
helper function that can be called from other places.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f19008e676366c44e9241af57f331b6c6edf9552 ]
When TFO keys are read back on big endian systems either via the global
sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values
don't match what was written.
For example, on s390x:
# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000
Instead of:
# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004
Fix this by converting to the correct endianness on read. This was
reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net
selftest on s390x, which depends on the read value matching what was
written. I've confirmed that the test now passes on big and little endian
systems.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Fixes: 438ac88009bc ("net: fastopen: robustness and endianness fixes for SipHash")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-and-tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b06c19d9f827f6743122795570bfc0c72db482b0 ]
When MSG_OOB is specified to tls_device_sendpage() the mapped page is
never unmapped.
Hold off mapping the page until after the flags are checked and the page
is actually needed.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce787a5a074a86f76f5d3fd804fa78e01bfb9e89 ]
We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed
accordingly.
Fixes: 00e188ef6a7e ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26896f01467a28651f7a536143fe5ac8449d4041 ]
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first.
Signed-off-by: Qingyu Li <ieatmuttonchuan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f5907af39137f8183ed536aaa00f322d7365130 ]
If we failed to assign proto idx, we free the twsk_slab_name but forget to
free the twsk_slab. Add a helper function tw_prot_cleanup() to free these
together and also use this helper function in proto_unregister().
Fixes: b45ce32135d1 ("sock: fix potential memory leak in proto_register()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fd1cb80daa20af063bce81e1fad14e945a8dc4 ]
After @blk_fill_in_prog_lock is acquired there is an early out vnet
situation that can occur. In that case, the rwlock needs to be
released.
Also, since @blk_fill_in_prog_lock is only acquired when @tp_version
is exactly TPACKET_V3, only release it on that exact condition as
well.
And finally, add sparse annotation so that it is clearer that
prb_fill_curr_block() and prb_clear_blk_fill_status() are acquiring
and releasing @blk_fill_in_prog_lock, respectively. sparse is still
unable to understand the balance, but the warnings are now on a
higher level that make more sense.
Fixes: 632ca50f2cbd ("af_packet: TPACKET_V3: replace busy-wait loop")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 986a4b63d3bc5f2c0eb4083b05aff2bf883b7b2f ]
Braino when converting "buf->len -=" to "buf->len = len -".
The result is under-estimation of the ralign and rslack values. On
krb5p mounts, this has caused READDIR to fail with EIO, and KASAN
splats when decoding READLINK replies.
As a result of fixing this oversight, the gss_unwrap method now
returns a buf->len that can be shorter than priv_len for small
RPC messages. The additional adjustment done in unwrap_priv_data()
can underflow buf->len. This causes the nfsd_request_too_large
check to fail during some NFSv3 operations.
Reported-by: Marian Rainer-Harbach
Reported-by: Pierre Sauter <pierre.sauter@stwm.de>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886277
Fixes: 31c9590ae468 ("SUNRPC: Add "@len" parameter to gss_unwrap()")
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e814eecbe3bbeaa8b004d25a4b8974d232b765a9 ]
Commit 07d0ff3b0cd2 ("svcrdma: Clean up Read chunk path") moved the
page saver logic so that it gets executed event when an error occurs.
In that case, the I/O is never posted, and those pages are then
leaked. Errors in this path, however, are quite rare.
Fixes: 07d0ff3b0cd2 ("svcrdma: Clean up Read chunk path")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a5e4d7a594e0fe237d3dfafb069bb82f80f42f ]
YangYuxi is reporting that connection reuse
is causing one-second delay when SYN hits
existing connection in TIME_WAIT state.
Such delay was added to give time to expire
both the IPVS connection and the corresponding
conntrack. This was considered a rare case
at that time but it is causing problem for
some environments such as Kubernetes.
As nf_conntrack_tcp_packet() can decide to
release the conntrack in TIME_WAIT state and
to replace it with a fresh NEW conntrack, we
can use this to allow rescheduling just by
tuning our check: if the conntrack is
confirmed we can not schedule it to different
real server and the one-second delay still
applies but if new conntrack was created,
we are free to select new real server without
any delays.
YangYuxi lists some of the problem reports:
- One second connection delay in masquerading mode:
https://marc.info/?t=151683118100004&r=1&w=2
- IPVS low throughput #70747
https://github.com/kubernetes/kubernetes/issues/70747
- Apache Bench can fill up ipvs service proxy in seconds #544https://github.com/cloudnativelabs/kube-router/issues/544
- Additional 1s latency in `host -> service IP -> pod`
https://github.com/kubernetes/kubernetes/issues/90854
Fixes: f719e3754ee2 ("ipvs: drop first packet to redirect conntrack")
Co-developed-by: YangYuxi <yx.atom1@gmail.com>
Signed-off-by: YangYuxi <yx.atom1@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 412055398b9e67e07347a936fc4a6adddabe9cf4 upstream.
svcrdma expects that the payload falls precisely into the xdr_buf
page vector. This does not seem to be the case for
nfsd4_encode_readv().
This code is called only when fops->splice_read is missing or when
RQ_SPLICE_OK is clear, so it's not a noticeable problem in many
common cases.
Add new transport method: ->xpo_read_payload so that when a READ
payload does not fit exactly in rq_res's page vector, the XDR
encoder can inform the RPC transport exactly where that payload is,
without the payload's XDR pad.
That way, when a Write chunk is present, the transport knows what
byte range in the Reply message is supposed to be matched with the
chunk.
Note that the Linux NFS server implementation of NFS/RDMA can
currently handle only one Write chunk per RPC-over-RDMA message.
This simplifies the implementation of this fix.
Fixes: b04209806384 ("nfsd4: allow exotic read compounds")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198053
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 730e700e2c19d87e578ff0e7d8cb1d4a02b036d2 ]
For retransmitted packets, TCP needs to resort to using TCP timestamps
for computing RTT samples. In the common case where the data and ACK
fall in the same 1-millisecond interval, TCP senders with millisecond-
granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us
of 0 propagates to rs->rtt_us.
This value of 0 can cause performance problems for congestion control
modules. For example, in BBR, the zero min_rtt sample can bring the
min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a
low throughput. It would be hard to mitigate this with filtering in
the congestion control module, because the proper floor to apply would
depend on the method of RTT sampling (using timestamp options or
internally-saved transmission timestamps).
This fix applies a floor of 1 for the RTT sample delta from TCP
timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at
least 1 * (USEC_PER_SEC / TCP_TS_HZ).
Note that the receiver RTT computation in tcp_rcv_rtt_measure() and
min_rtt computation in tcp_update_rtt_min() both already apply a floor
of 1 timestamp tick, so this commit makes the code more consistent in
avoiding this edge case of a value of 0.
Signed-off-by: Jianfeng Wang <jfwang@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9aba6c5b49254d5bee927d81593ed4429e91d4ae ]
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 3-byte hole at the end
of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix
it by initializing `orig` with memset().
Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 622e32b7d4a6492cf5c1f759ef833f817418f7b3 ]
The GRE tunnel can be used to transport traffic that does not rely on a
Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE
or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC
offload has been disabled. In order to fix the issue we need to
recompute the GRE csum in gre_gso_segment() not relying on the inner
checksum.
The issue is still present when we have the CRC offload enabled.
In this case we need to disable the CRC offload if we require GRE
checksum since otherwise skb_checksum() will report a wrong value.
Fixes: 90017accff61 ("sctp: Add GSO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0f6ba2ef2c1c95069509e71402e7d6d43452512 ]
Add a missing return statement to atalk_proc_init so it doesn't return
-ENOMEM when successful. This allows the appletalk module to load
properly.
Fixes: e2bcd8b0ce6e ("appletalk: use remove_proc_subtree to simplify procfs code")
Link: https://www.downtowndougbrown.com/2020/08/hacking-up-a-fix-for-the-broken-appletalk-kernel-module-in-linux-5-1-and-newer/
Reported-by: Christopher KOBAYASHI <chris@disavowed.jp>
Reported-by: Doug Brown <doug@downtowndougbrown.com>
Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
[lukas: add missing tags]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.1+
Cc: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65550098c1c4db528400c73acf3e46bfa78d9264 ]
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 706ec919164622ff5ce822065472d0f30a9e9dd2 ]
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c0de6e96c9794cb523a516c465991a70245da1c ]
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83f3522860f702748143e022f1a546547314c715 ]
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020
Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4052d3d2e8f47a15053320bbcbe365d15610437d ]
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a39c46067c845a8a2d7144836e9468b7f072343e ]
p9_fd_open just fgets file descriptors passed in from userspace, but
doesn't verify that they are valid for read or writing. This gets
cought down in the VFS when actually attempting a read or write, but
a new warning added in linux-next upsets syzcaller.
Fix this by just verifying the fds early on.
Link: http://lkml.kernel.org/r/20200710085722.435850-1-hch@lst.de
Reported-by: syzbot+e6f77e16ff68b2434a2c@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Dominique: amend goto as per Doug Nazar's review]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 75bbd2ea50ba1c5d9da878a17e92eac02fe0fd3a upstream.
Check `num_rsp` before using it as for-loop counter.
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51c19bf3d5cfaa66571e4b88ba2a6f6295311101 upstream.
Check upon `num_rsp` is insufficient. A malformed event packet with a
large `num_rsp` number makes hci_extended_inquiry_result_evt() go out
of bounds. Fix it.
This patch fixes the following syzbot bug:
https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2
Reported-by: syzbot+d8489a79b781849b9c46@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb0de3131f4c60a9bf976681e0fe4d1e55c7a821 upstream.
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f47e8ab6ab796b5380f74866fa5287aca4dcc58 ]
In commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"),
it would take 'priority' to make a policy unique, and allow duplicated
policies with different 'priority' to be added, which is not expected
by userland, as Tobias reported in strongswan.
To fix this duplicated policies issue, and also fix the issue in
commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"),
when doing add/del/get/update on user interfaces, this patch is to change
to look up a policy with both mark and mask by doing:
mark.v == pol->mark.v && mark.m == pol->mark.m
and leave the check:
(mark & pol->mark.m) == pol->mark.v
for tx/rx path only.
As the userland expects an exact mark and mask match to manage policies.
v1->v2:
- make xfrm_policy_mark_match inline and fix the changelog as
Tobias suggested.
Fixes: 295fae568885 ("xfrm: Allow user space manipulation of SPD mark")
Fixes: ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4becb7ee5b3d2829ed7b9261a245a77d5b7de902 upstream.
x25_connect() invokes x25_get_neigh(), which returns a reference of the
specified x25_neigh object to "x25->neighbour" with increased refcnt.
When x25 connect success and returns, the reference still be hold by
"x25->neighbour", so the refcount should be decreased in
x25_disconnect() to keep refcount balanced.
The reference counting issue happens in x25_disconnect(), which forgets
to decrease the refcnt increased by x25_get_neigh() in x25_connect(),
causing a refcnt leak.
Fix this issue by calling x25_neigh_put() before x25_disconnect()
returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbc8a99e952226c585ac17477a85ef1194501762 upstream.
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff30 ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74d6a5d5662975aed7f25952f62efbb6f6dadd29 upstream.
p9_read_work and p9_fd_cancelled may be called concurrently.
In some cases, req->req_list may be deleted by both p9_read_work
and p9_fd_cancelled.
We can fix it by ignoring replies associated with a cancelled
request and ignoring cancelled request if message has been received
before lock.
Link: http://lkml.kernel.org/r/20200612090833.36149-1-wanghai38@huawei.com
Fixes: 60ff779c4abb ("9p: client: remove unused code and any reference to "cancelled" function")
Cc: <stable@vger.kernel.org> # v3.12+
Reported-by: syzbot+77a25acfa0382e06ab23@syzkaller.appspotmail.com
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f45db2b909c7e76f35850e78f017221f30282b8e ]
The domain table should be empty at module unload. If it isn't there is
a bug somewhere. So check and report.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
