IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit f71800228dc74711c3df43854ce7089562a3bc2d upstream.
The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.
This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.
This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbafc67307ec06036b25b223a251af03fe07969a upstream.
lri ususally of variable len and far exceeding 127 dwords.
Fixes: 00a33be40634 ("drm/i915/gvt: Add valid length check for MI variable commands")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304095121.21609-1-yan.y.zhao@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream.
The iSCSI target login thread might get stuck with the following stack:
cat /proc/`pidof iscsi_np`/stack
[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30
This can be reproduced via the following steps:
1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing
PDU exchange in the login thread and before the negotiation is finished
the the network link goes down. At this point A has not finished login
and tpg->np_login_sem is held.
2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing
PDU exchange in the login thread the target expects to process remaining
login PDUs in workqueue context.
3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new
socket. A' will wait for tpg->np_login_sem with np->np_login_timer
loaded to wait for at most 15 seconds. The lock is held by A so A'
eventually times out.
4. Before A' got timeout initiator B gets negotiation failed and calls
iscsi_target_login_drop()->iscsi_target_login_sess_out(). The
np->np_login_timer is canceled and initiator A' will hang forever.
Because A' is now in the login thread, no new login requests can be
serviced.
Fix this by moving iscsi_stop_login_thread_timer() out of
iscsi_target_login_sess_out(). Also remove iscsi_np parameter from
iscsi_target_login_sess_out().
Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5528d03183fe5243416c706f64b1faa518b05130 upstream.
Current code does not consider 'page_off' in data digest calculation. To
fix this, add a local variable 'first_sg' and set first_sg.offset to
sg->offset + page_off.
Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Christie <michael.christie@oralce.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a7416f94707c60b9f66b01c0a505b7e41375f3a upstream.
The recent commit 7d8196641ee1 ("regulator: Remove pointer table
overallocation") changed the size of coupled_rdevs and now KASAN is able
to detect slab-out-of-bounds problem in regulator_unlock_recursive(),
which is a legit problem caused by a typo in the code. The recursive
unlock function uses n_coupled value of a parent regulator for unlocking
supply regulator, while supply's n_coupled should be used. In practice
problem may only affect platforms that use coupled regulators.
Cc: stable@vger.kernel.org # 5.0+
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200831204335.19489-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3c731564e09b6c2ebefcd1344743a91a237d6dc upstream.
By calling device_initialize() earlier and noting that kfree(NULL) is
ok, we can save a bit of code in error handling and plug of_node leak.
Fixed commit already did part of the work.
Fixes: 9177514ce349 ("regulator: fix memory leak on error path of regulator_register()")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/f5035b1b4d40745e66bacd571bbbb5e4644d21a1.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c06540165d443c6455123eb48e7f1a9b618ab34 upstream.
Pull regulator_list_mutex into set_consumer_device_supply() and keep
allocations outside of it. Fourth of the fs_reclaim deadlock case.
Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87fe29b61f9522a3d7b60a4580851f548558186f upstream.
Move all allocations outside of the regulator_lock()ed section.
======================================================
WARNING: possible circular locking dependency detected
5.7.13+ #535 Not tainted
------------------------------------------------------
f2fs_discard-179:7/702 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0
but task is already holding lock:
cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
[...]
-> #3 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire.part.11+0x40/0x50
fs_reclaim_acquire+0x24/0x28
__kmalloc_track_caller+0x54/0x218
kstrdup+0x40/0x5c
create_regulator+0xf4/0x368
regulator_resolve_supply+0x1a0/0x200
regulator_register+0x9c8/0x163c
[...]
other info that might help us debug this:
Chain exists of:
regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock
[...]
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73a32129f8ccb556704a26b422f54e048bf14bd0 upstream.
Allocating memory with regulator_list_mutex held makes lockdep unhappy
when memory pressure makes the system do fs_reclaim on eg. eMMC using
a regulator. Push the lock inside regulator_init_coupling() after the
allocation.
======================================================
WARNING: possible circular locking dependency detected
5.7.13+ #533 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
cca78ca4 (&sbi->write_io[i][j].io_rwsem){++++}-{3:3}, at: __submit_merged_write_cond+0x104/0x154
but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire.part.11+0x40/0x50
fs_reclaim_acquire+0x24/0x28
__kmalloc+0x54/0x218
regulator_register+0x860/0x1584
dummy_regulator_probe+0x60/0xa8
[...]
other info that might help us debug this:
Chain exists of:
&sbi->write_io[i][j].io_rwsem --> regulator_list_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(regulator_list_mutex);
lock(fs_reclaim);
lock(&sbi->write_io[i][j].io_rwsem);
*** DEADLOCK ***
1 lock held by kswapd0/383:
#0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
[...]
Fixes: d8ca7d184b33 ("regulator: core: Introduce API for regulators coupling customization")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1a889cf7f61c6429c9e6b34ddcdde99be77a26b6.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c78544eaa4660096aeb6a57ec82b42cdb3bfe5a upstream.
When faulting in the pages for the user supplied buffer for the search
ioctl, we are passing only the base address of the buffer to the function
fault_in_pages_writeable(). This means that after the first iteration of
the while loop that searches for leaves, when we have a non-zero offset,
stored in 'sk_offset', we try to fault in a wrong page range.
So fix this by adding the offset in 'sk_offset' to the base address of the
user supplied buffer when calling fault_in_pages_writeable().
Several users have reported that the applications compsize and bees have
started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix
potential deadlock in the search ioctl") was added to stable trees, and
these applications make heavy use of the search ioctls. This fixes their
issues.
Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/
Link: https://github.com/kilobyte/compsize/issues/34
Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl")
CC: stable@vger.kernel.org # 4.4+
Tested-by: A L <mail@lechevalier.se>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fccc0007b8dc952c6bc0805cdf842eb8ea06a639 upstream.
Nikolay reported a lockdep splat in generic/476 that I could reproduce
with btrfs/187.
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2+ #1 Tainted: G W
------------------------------------------------------
kswapd0/100 is trying to acquire lock:
ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330
but task is already holding lock:
ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc_trace+0x3a/0x1a0
btrfs_alloc_device+0x43/0x210
add_missing_dev+0x20/0x90
read_one_chunk+0x301/0x430
btrfs_read_sys_array+0x17b/0x1b0
open_ctree+0xa62/0x1896
btrfs_mount_root.cold+0x12/0xea
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x379
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_lookup_inode+0x2a/0x8f
__btrfs_update_delayed_inode+0x80/0x240
btrfs_commit_inode_delayed_inode+0x119/0x120
btrfs_evict_inode+0x357/0x500
evict+0xcf/0x1f0
vfs_rmdir.part.0+0x149/0x160
do_rmdir+0x136/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/100:
#0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
#2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0
stack backtrace:
CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x12d/0x150
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
__mutex_lock+0x7e/0x7e0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? lock_acquire+0xa4/0x3d0
? btrfs_evict_inode+0x11e/0x500
? find_held_lock+0x2b/0x80
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
? _raw_spin_unlock_irqrestore+0x46/0x60
? add_wait_queue_exclusive+0x70/0x70
? balance_pgdat+0x670/0x670
kthread+0x138/0x160
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
This is because we are holding the chunk_mutex when we call
btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want
to switch that to a GFP_NOFS lock because this is the only place where
it matters. So instead use memalloc_nofs_save() around the allocation
in order to avoid the lockdep splat.
Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea57788eb76dc81f6003245427356a1dcd0ac524 upstream.
[BUG]
A completely sane converted fs will cause kernel warning at balance
time:
[ 1557.188633] BTRFS info (device sda7): relocating block group 8162107392 flags data
[ 1563.358078] BTRFS info (device sda7): found 11722 extents
[ 1563.358277] BTRFS info (device sda7): leaf 7989321728 gen 95 total ptrs 213 free space 3458 owner 2
[ 1563.358280] item 0 key (7984947200 169 0) itemoff 16250 itemsize 33
[ 1563.358281] extent refs 1 gen 90 flags 2
[ 1563.358282] ref#0: tree block backref root 4
[ 1563.358285] item 1 key (7985602560 169 0) itemoff 16217 itemsize 33
[ 1563.358286] extent refs 1 gen 93 flags 258
[ 1563.358287] ref#0: shared block backref parent 7985602560
[ 1563.358288] (parent 7985602560 is NOT ALIGNED to nodesize 16384)
[ 1563.358290] item 2 key (7985635328 169 0) itemoff 16184 itemsize 33
...
[ 1563.358995] BTRFS error (device sda7): eb 7989321728 invalid extent inline ref type 182
[ 1563.358996] ------------[ cut here ]------------
[ 1563.359005] WARNING: CPU: 14 PID: 2930 at 0xffffffff9f231766
Then with transaction abort, and obviously failed to balance the fs.
[CAUSE]
That mentioned inline ref type 182 is completely sane, it's
BTRFS_SHARED_BLOCK_REF_KEY, it's some extra check making kernel to
believe it's invalid.
Commit 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref
type") introduced extra checks for backref type.
One of the requirement is, parent bytenr must be aligned to node size,
which is not correct.
One example is like this:
0 1G 1G+4K 2G 2G+4K
| |///////////////////|//| <- A chunk starts at 1G+4K
| | <- A tree block get reserved at bytenr 1G+4K
Then we have a valid tree block at bytenr 1G+4K, but not aligned to
nodesize (16K).
Such chunk is not ideal, but current kernel can handle it pretty well.
We may warn about such tree block in the future, but should not reject
them.
[FIX]
Change the alignment requirement from node size alignment to sector size
alignment.
Also, to make our lives a little easier, also output @iref when
btrfs_get_extent_inline_ref_type() failed, so we can locate the item
easier.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205475
Fixes: 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref type")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments and messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fea22e159d51c766ba70473f473a0ec914cc7e92 upstream.
let's use usb_find_common_endpoints() to discover endpoints, it does all
necessary checks for type and xfer direction
remove memset() in hfa384x_create(), because we now assign endpoints in
prism2sta_probe_usb() and because create_wlan() uses kzalloc() to
allocate hfa384x struct before calling hfa384x_create()
Fixes: faaff9765664 ("staging: wlan-ng: properly check endpoint types")
Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53a
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89226a296d816727405d3fea684ef69e7d388bd8 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack. As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The additional forcing of the 8 byte alignment of the timestamp
is not strictly necessary but makes the code less fragile by
making this explicit.
Fixes: c7eeea93ac60 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e5ac1f2206eda414f90c698fe1820dee873394d upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The force alignment of ts is not strictly necessary in this particularly
case but does make the code less fragile.
Fixes: a84ef0d181d9 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95ad67577de4ea08eb8e441394e698aa4addcc0b upstream.
iio_push_to_buffers_with_timestamp assumes 8 byte alignment which
is not guaranteed by an array of smaller elements.
Note that whilst in this particular case the alignment forcing
of the ts element is not strictly necessary it acts as good
documentation. Doing this where not necessary should cut
down on the number of cut and paste introduced errors elsewhere.
Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb1a148ef41d8ae8d9201efc3f1b145976290331 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
The explicit alignment of ts is necessary to ensure consistent
padding for x86_32 in which the ts would otherwise be 4 byte aligned.
Fixes: 283d26917ad6 ("iio: chemical: ccs811: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 523628852a5f5f34a15252b2634d0498d3cfb347 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak appart
from previous readings.
It is necessary to force the alignment of ts to avoid the padding
on x86_32 being different from 64 bit platorms (it alows for
4 bytes aligned 8 byte types.
Fixes: 06ad7ea10e2b ("max44000: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02ad21cefbac4d89ac443866f25b90449527737b upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart from
previous readings.
The explicit alignment of ts is not necessary in this case as by
coincidence the padding will end up the same, however I consider
it to make the code less fragile and have included it.
Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54f82df2ba86e2a8e9cbf4036d192366e3905c89 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak apart
from previous readings.
The eplicit alignment of ts is necessary to ensure correct padding
on x86_32 where s64 is only aligned to 4 bytes.
Fixes: 08e05d1fce5c ("ti-adc081c: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db8f06d97ec284dc018e2e4890d2e5035fde8630 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart
from previous readings.
The explicit alignment of ts is necessary to ensure correct padding
on architectures where s64 is only 4 bytes aligned such as x86_32.
Fixes: a9e9c7153e96 ("iio: adc: add max1117/max1118/max1119 ADC driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8cd222feb82ecd82dcf610fcc15186f55f9c2b5 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak apart from previous readings. The explicit alignment
isn't technically needed here, but it reduced fragility and avoids
cut and paste into drivers where it will be needed.
If we want this in older stables will need manual backport due to
driver reworks.
Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a661b571e3682705cb402a5cd1e970586a3ec00f upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak apart from
previous readings.
The force alignment of ts is not strictly necessary in this case
but reduces the fragility of the code.
Fixes: 3691e5a69449 ("iio: adc: add driver for the ti-adc084s021 chip")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mårten Lindahl <martenli@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6f86f724394de3629da63fe5e1b7a4ab3396efe upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by moving
to a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
Fixes tag is beyond some major refactoring so likely manual backporting
would be needed to get that far back.
Whilst the force alignment of the ts is not strictly necessary, it
does make the code less fragile.
Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f60e8bb84282b8e633956cfe74b4f0d64ca73cec upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte s16 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
In this case the forced alignment of the ts is necessary to ensure
correct padding on x86_32 where the s64 would only be 4 byte aligned.
Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2684d5003490df5398aeafe2592ba9d4a4653998 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here we use a structure on the stack. The driver already did an
explicit memset so no data leak was possible.
Forced alignment of ts is not strictly necessary but probably makes
the code slightly less fragile.
Note there has been some rework in this driver of the years, so no
way this will apply cleanly all the way back.
Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 336306790b2bbf7ce837625fa3b24ba724d05838 upstream.
BMI160 Minimium gyroscope frequency in normal mode is 25Hz.
When older EC firmware do not report their sensors frequencies,
use 25Hz as the minimum for gyroscope to be sure it works on BMI160.
Fixes: ae7b02ad2f32d ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e71e6dbe96ac80ac2aebe71a6a942e7bd60e7596 upstream.
To stop conversion ads1015_set_power_state() function call unimplemented
function __pm_runtime_suspend() from pm_runtime_put_autosuspend()
if CONFIG_PM is not set.
In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS,
so ads1015_read_raw() failed because ads1015_set_power_state() returns an
error.
If CONFIG_PM is disabled, there is no need to start/stop conversion.
Fix it by adding return 0 function variant if CONFIG_PM is not set.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support")
Tested-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2822e582501b65707089b097e773e6fd70774841 ]
When memory encryption is active the device is likely not in a direct
mapped domain. Forbid using IOMMUv2 functionality for now until finer
grained checks for this have been implemented.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d98299885c9ea140c1108545186593deba36c4ac ]
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.
This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13774d81f38538c5fa2924bdcdfa509155480fa6 ]
In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.
This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0328feda79d9681b3e3245e6e180295550c8ee9 ]
In the arm64 module linker script, the section .text.ftrace_trampoline
is specified unconditionally regardless of whether CONFIG_DYNAMIC_FTRACE
is enabled (this is simply due to the limitation that module linker
scripts are not preprocessed like the vmlinux one).
Normally, for .plt and .text.ftrace_trampoline, the section flags
present in the module binary wouldn't matter since module_frob_arch_sections()
would assign them manually anyway. However, the arm64 module loader only
sets the section flags for .text.ftrace_trampoline when CONFIG_DYNAMIC_FTRACE=y.
That's only become problematic recently due to a recent change in
binutils-2.35, where the .text.ftrace_trampoline section (along with the
.plt section) is now marked writable and executable (WAX).
We no longer allow writable and executable sections to be loaded due to
commit 5c3a7db0c7ec ("module: Harden STRICT_MODULE_RWX"), so this is
causing all modules linked with binutils-2.35 to be rejected under arm64.
Drop the IS_ENABLED(CONFIG_DYNAMIC_FTRACE) check in module_frob_arch_sections()
so that the section flags for .text.ftrace_trampoline get properly set to
SHF_EXECINSTR|SHF_ALLOC, without SHF_WRITE.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: http://lore.kernel.org/r/20200831094651.GA16385@linux-8ccs
Link: https://lore.kernel.org/r/20200901160016.3646-1-jeyu@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacc9c5a927e474c173a5d53dd7fb8e306511768 ]
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43298db3009f06fe5c69e1ca8b6cfc2565772fa1 ]
After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive
mode with HWP enabled") it is possible to change the driver status
to "off" via sysfs with HWP enabled, which effectively causes the
driver to unregister itself, but HWP remains active and it forces the
minimum performance, so even if another cpufreq driver is loaded,
it will not be able to control the CPU frequency.
For this reason, make the driver refuse to change the status to
"off" with HWP enabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]
HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.
Also adding name of PHY placed on HSDK board.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7429ea53d6c0936a0f10a5d64164f0aea440143 ]
When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ]
This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.
This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724a419ea28f7514a391e80040230f69cf626707 ]
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77df710ba633dfb6c65c65cf99ea9e084a1c9933 ]
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2362acb6785611eda795bfc12e1ea6b202ecf62c ]
If the controller becomes unresponsive in the middle of a reset, we
will hang because we are waiting for the freeze to complete, but that
cannot happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to
proceed (either schedule a reconnect of remove the controller).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0475a8dcbcee92a5d22e40c9c6353829fc6294b8 ]
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5110f40241d08334375eb0495f174b1d2c07657e ]
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5c01f4f7f623e768e868bcc08d8e7ceb03b75d0 ]
If the controller becomes unresponsive in the middle of a reset, we will
hang because we are waiting for the freeze to complete, but that cannot
happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to proceed
(either schedule a reconnect of remove the controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236187c4ed195161dfa4237c7beffbba0c5ae45b ]
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4d61470ae48838f49e668503e840e1520b97162 ]
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf0d7c0f3c3b0203aaf81c1bc884924d8fdb9bd ]
Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
