IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b0db163ff9200a55dc77a652dad1d4b0a853f63 ]
There is no atmel,shdwc-debouncer property for SHDWC. The right DT property
is debounce-delay-us. Use it.
Fixes: 16b161bcf5d4 ("ARM: dts: at91: sama7g5: add shdwc node")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230523052750.184223-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd4923d18d5698a5910d516646ce125b9155d47 ]
The of_find_device_by_node() function is returning a struct platform_device
object with the embedded struct device member's reference counter
incremented. This needs to be dropped when done with the platform device
returned by of_find_device_by_node().
at91_pm_eth_quirk_is_valid() calls of_find_device_by_node() on
suspend and resume path. On suspend it calls of_find_device_by_node() and
on resume and failure paths it drops the counter of
struct platform_device::dev.
In case ethernet device may not wakeup there is a put_device() on
at91_pm_eth_quirk_is_valid() which is wrong as it colides with
put_device() on resume path leading to the reference counter of struct
device embedded in struct platform_device to be messed, stack trace to be
displayed (after 5 consecutive suspend/resume cycles) and execution to
hang.
Along with this the error path of at91_pm_config_quirks() had been also
adapted to decrement propertly the reference counter of struct device
embedded in struct platform_device.
Fixes: b7fc72c63399 ("ARM: at91: pm: add quirks for pm")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230518062511.2988500-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]
When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.
For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}
For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.
For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.
To fix this,add uleb128 decode to cover all the above case.
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91aa4b3782448a7a13baa8cbcdfd5fd19defcbd9 upstream.
This worked before by coincidence, as the regulator was probed and enabled
before PCI RC probe. But probe order changed since commit 259b93b21a9f
("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in
4.14") and PCIe supply is enabled after RC.
Fix this by adding the regulator to RC node.
The PCIe vaux regulator still needs to be enabled unconditionally for
Mini-PCIe USB-only devices.
Fixes: ef3846247b41 ("ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46dd6078dbc7e363a8bb01209da67015a1538929 ]
Fix kernel-doc warnings from the kernel test robot:
jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK'
jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead
jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse'
jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte'
jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout'
Link: lore.kernel.org/r/202304210535.tWby3jWF-lkp@intel.com
Fixes: 69ebb22277a5 ("[ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kristoffer Ericson <Kristoffer.ericson@gmail.com>
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a3fd10732d276d7cf372c6746a78a1c8b6aa7541 upstream.
Turns out it's in fact not the same as the heartbeat LED.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org # v5.18+
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream.
The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first
clock name to be "csis". Otherwise the driver fails to probe.
Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream.
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Cc: <stable@vger.kernel.org>
Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board")
Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dedb724446913ea7b1591b4b3d2e3e909090980 upstream.
While I'm not aware of any problems that have occurred running these
at 100 MHz, the official word from ASRock is that 50 MHz is the
correct speed to use, so let's be safe and use that instead.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org
Fixes: 2b81613ce417 ("ARM: dts: aspeed: Add ASRock E3C246D4I BMC")
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-4-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b9f0ec81af0012aae30aa3b4c711ad71d42e246 ]
Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
assign spi1 pin definition to the correct controller.
Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ]
OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.
Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.
Another symptom is that
/sys/kernel/debug/dmaengine/summary
has 32 entries and does not show all required channels.
Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.
Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).
Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b76b736cd9933ff88764ffec01cbd859c1475e7 ]
Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.
This also requires sorting the node in the ascending order.
Fixes: e6b69813283f ("ARM: dts: qcom: sdx55: Add support for PCIe EP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9745c275246a7e43c34d1b3be5ff9a9f3cf9305 ]
The opp-320000000 name is rather misleading with the opp-hz value
of 450 MHz. Fix it!
Fixes: 8db0b6c7b636 ("ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220120831.1591820-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecd240875e877d78fd03efbc62292f550872df3f ]
Turns out these two memory regions also need to be avoided, otherwise
weird things will happen when Linux tries to use this memory.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac10c83b330680cc01ceaaab86cd49f4f30d81 ]
__copy_to_user_memcpy() and __clear_user_memset() had been calling
memcpy() and memset() respectively, leading to false-positive KASAN
reports when starting userspace:
[ 10.707901] Run /init as init process
[ 10.731892] process '/bin/busybox' started with executable stack
[ 10.745234] ==================================================================
[ 10.745796] BUG: KASAN: user-memory-access in __clear_user_memset+0x258/0x3ac
[ 10.747260] Write of size 2687 at addr 000de581 by task init/1
Use __memcpy() and __memset() instead to allow userspace access, which
is of course the intent of these functions.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8cef541dd5ef9445130660008c029205c4c5aa5 ]
The ADC sensor for the battery needs to be named "iio-hwmon" for
compatibility with user space applications.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com
Fixes: bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e4505e617a80f601e2f53a917611777f128f925 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 408ab6786dbf6dd696488054c9559681112ef994 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af4ab377543853b690cc85b4c46cf976ab560dc2 upstream.
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.12
Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 157178a7912e00a0aa0371dc9041952c1a21d112 upstream.
SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 98187f7b74bf ("ARM: dts: qcom: sdx65: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d5aa219a790d61cad2c38e1aa32058f16ad2f0b ]
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230121201844.46872-2-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c32919a378782c95c72bc028b5c30dfe8c11f82 ]
In omap4_sram_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220628112939.160737-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 366384e495511bea8583e44173629a3012d62db0 ]
The STM32MP13x Device Part Number (also named RPN in reference manual)
only uses the first 12 bits in OTP4, all the other bit are reserved and
they can be different of zero; they must be masked in NVMEM result, so
the number of bits must be defined in the nvmem cell description.
Fixes: 1da8779c0029 ("ARM: dts: stm32: add STM32MP13 SoCs support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430 ]
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebeb49f43c8952f12aa20f03f00d7009edc2d1c5 ]
The function call ida_simple_get maybe fail,we should deal with it.
And if ida_simple_get success ,it need to call ida_simple_remove also.
BTW,devm_kasprintf can handle id is zero for consistency.
Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15d2a617499882971ddb773a583015bf36fa492 ]
The property is wr-active:
exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato")
Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf52f5e4d12b8109f348cab60cb7d51092c4270 ]
The prototype does not match the definition, as gcc-13 points
out:
arch/arm/mach-s3c/s3c64xx.c:169:13: error: conflicting types for 's3c64xx_set_timer_source' due to enum/integer mismatch; have 'void(unsigned int, unsigned int)' [-Werror=enum-int-mismatch]
169 | void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-s3c/s3c64xx.c:50:
arch/arm/mach-s3c/s3c64xx.h:62:20: note: previous declaration of 's3c64xx_set_timer_source' with type 'void(enum s3c64xx_timer_mode, enum s3c64xx_timer_mode)'
62 | extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4280506ac9bb ("ARM: SAMSUNG: Move all platforms to new clocksource driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230118090224.2162863-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc8dd99840b7fb7190e769a893cda673bc3a907 ]
Booting Linux on a Raspberry Pi based on bcm2835_defconfig there is
no display activity.
Enable CONFIG_FB which is nowadays required for CONFIG_FB_SIMPLE
and CONFIG_FRAMEBUFFER_CONSOLE.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230113205842.17051-1-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0414a100d6ab32721efa70ab55524540fdfe0ede ]
If platform_device_add() is not called or failed, it should call
platform_device_put() in error case.
Fixes: 97933d6ced60 ("ARM: OMAP1: dmtimer: conversion to platform devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Message-Id: <20220701094602.2365099-1-yangyingliang@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed8167cbf65c2b6ff6faeb0f96ded4d6d581e1ac ]
The "sys_clk" resource is malloced by clk_get(),
it is not released when the function return.
Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter.")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Message-Id: <20221108141917.46796-1-judy.chenhui@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4722dd4029c63f10414ffd8d3ffdd6c748391cd7 ]
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80422339a75088322b4d3884bd12fa0fe5d11050 ]
The clocks in the Rockchip rk3288 DisplayPort node are
included in the power-domain@RK3288_PD_VIO logic, but the
power-domains property in the dp node is missing, so fix it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/dab85bfb-9f55-86a1-5cd5-7388c43e0ec5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1febf88ef907b142fdde34f7c64ed3535d9339e4 upstream.
Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.
This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.
With this change, the USB modem can be successfully re-connected
after a reset.
Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
