IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream.
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17d793f3ed53080dab6bbeabfc82de890c901001 upstream.
To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.
This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08a46b4190d345544d04ce4fe2e1844b772b8535 upstream.
Some older tablets may not report physical maximum for X/Y
coordinates. Set a default to prevent undefined resolution.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20230409164229.29777-1-ping.cheng@wacom.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11e0b0067ec0707e8e598a5f9a547ab618ae7982 upstream.
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper provides symmetry for releasing firmware.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2210af50ae7f4104269dfde7bafbbfbacdbe1a2b upstream.
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc42e76e7de5190a7da5dac9d7b2bbb458e050bf upstream.
Add an early_init phase to MES for fetching and validating microcode
from the filesystem.
If MES microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.
Move the request for MES microcode into the early_init phase
so that if it's not available, early_init will fail.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6040517e4a29d3828160c571681eec9ffe10043f upstream.
MES scheduler and kiq versions are stored in mes.sched_version and
mes.kiq_version, respectively, which are read from a register after
their queues are initialized. Remove mes.ucode_fw_version and
mes.data_fw_version which tried to read this versioning info from the
firmware headers (which don't contain this information).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5247f05eadf1081a74b2233f291cee2efed25e3a upstream.
Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.
v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58d9b9a14b47c2a3da6effcbb01607ad7edc0275 upstream.
amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.
v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541
Fixes: eb4900aa4c49 ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b504f99ccaa64da364443431e388ecf30b604e38 upstream.
[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
we want to enforce minimum 60us of prefetch to avoid
intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
theory there should not be any UCLK DPM regressions by
enforcing greater prefetch
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c032c37ac3ef3b7df30937c785ecc4da428edc0 upstream.
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 922a76ba31adf84e72bc947267385be420c689ee upstream.
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08da182175db4c7f80850354849d95f2670e8cd9 upstream.
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 682439fffad9fa9a38d37dd1b1318e9374232213 upstream.
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf224e00a9f54e2bf14b4d720a09c3d2f4aa4aa8 upstream.
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d29fb7baab09b6a1dc484c9c67933253883e770a upstream.
[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.
[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab4f869fba6119997f7630d600049762a2b014fa upstream.
This is the logical place to put the backlight device, and it also
fixes a kernel crash if the MIPI host is removed. Previously the
backlight device would be unregistered twice when this happened - once
as a child of the MIPI host through `mipi_dsi_host_unregister`, and
once when the panel device is destroyed.
Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112eaa8fec5ea75f1be003ec55760b09a86799f8 upstream.
In pch_pic_parse_madt(), a NULL parent pointer will be
returned from acpi_get_vec_parent() for second pch-pic domain
related to second bridge while calling eiointc_acpi_init() at
first time, where the parent of it has not been initialized
yet, and will be initialized during second time calling
eiointc_acpi_init(). So, it's reasonable to return zero so
that failure of acpi_table_parse_madt() will be avoided, or else
acpi_cascade_irqdomain_init() will return and initialization of
followed pch_msi domain will be skipped.
Although it does not matter when pch_msi_parse_madt() returns
-EINVAL if no invalid parent is found, it's also reasonable to
return zero for that.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-2-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48ce2d722f7f108f27bedddf54bee3423a57ce57 upstream.
For dual-bridges scenario, pch_pic_acpi_init() will be called
in following path:
cpuintc_acpi_init
acpi_cascade_irqdomain_init(in cpuintc driver)
acpi_table_parse_madt
eiointc_parse_madt
eiointc_acpi_init /* this will be called two times
correspondingto parsing two
eiointc entries in MADT under
dual-bridges scenario*/
acpi_cascade_irqdomain_init(in eiointc driver)
acpi_table_parse_madt
pch_pic_parse_madt
pch_pic_acpi_init /* this will be called depend
on valid parent IRQ domain
handle for one or two times
corresponding to parsing
two pchpic entries in MADT
druring calling
eiointc_acpi_init() under
dual-bridges scenario*/
During the first eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called just one time since only
one valid parent IRQ domain handle will be found for current
eiointc IRQ domain.
During the second eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called two times since two valid
parent IRQ domain handles will be found. So in pch_pic_acpi_init(),
we must have a reasonable way to prevent from creating second same
pch_pic IRQ domain.
The patch matches gsi base information in created pch_pic IRQ
domains to check if the target domain has been created to avoid the
bug mentioned above.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-6-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d94772154e524b329a168678836745d2773a6e02 upstream.
F2FS has the same issue in ext4_rename causing crash revealed by
xfstests/generic/707.
See also commit 0813299c586b ("ext4: Fix possible corruption when moving a directory")
CC: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8c2969bfcba5fcba3a5b078315c1b586d927d9f upstream.
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
(cherry picked from commit fa83c12132f71302f7d4b02758dc0d46048d3f5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a75b49db6529b2af049eafd938fae888451c3685 upstream.
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Fixes: 060530f1ea67 ("drm/msm: use componentised device support")
Cc: stable@vger.kernel.org # 3.15
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/
Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60d476af96015891c7959f30838ae7a9749932bf upstream.
Make sure to release the VRAM buffer also in a case a subcomponent fails
to bind.
Fixes: d863f0c7b536 ("drm/msm: Call msm_init_vram before binding the gpu")
Cc: stable@vger.kernel.org # 5.11
Cc: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525094/
Link: https://lore.kernel.org/r/20230306100722.28485-7-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd459c005de3e2b855a8cc7768e633ce9d018e9f upstream.
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces")
Cc: stable@vger.kernel.org # 5.14
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/
Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a465353b9250802f87b97123e33a17f51277f0b1 upstream.
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Cc: stable@vger.kernel.org # 5.14
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/
Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f435b7ef3b360d689df2ffa8326352cd07940d92 upstream.
LT8912 DSI port supports only Non-Burst mode video operation with Sync
Events and continuous clock on clock lane, correct dsi mode flags
according to that removing MIPI_DSI_MODE_VIDEO_BURST flag.
Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d997f95b70f98987ae031a89677c13e0e223670 upstream.
A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.
Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).
Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3fd10732d276d7cf372c6746a78a1c8b6aa7541 upstream.
Turns out it's in fact not the same as the heartbeat LED.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org # v5.18+
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream.
The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first
clock name to be "csis". Otherwise the driver fails to probe.
Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream.
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Cc: <stable@vger.kernel.org>
Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board")
Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dedb724446913ea7b1591b4b3d2e3e909090980 upstream.
While I'm not aware of any problems that have occurred running these
at 100 MHz, the official word from ASRock is that 50 MHz is the
correct speed to use, so let's be safe and use that instead.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org
Fixes: 2b81613ce417 ("ARM: dts: aspeed: Add ASRock E3C246D4I BMC")
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-4-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 228b09de936395ddd740df3522ea35ae934830d8 upstream.
Relatively new docs which I added which hinted the base directories needed
to be created before is wrong, remove that incorrect comment. This has been
hinted before by Eric twice already [0] [1], I had just not verified that
until now. Now that I've verified that updates the docs to relax the context
described.
[0] https://lkml.kernel.org/r/875ys0azt8.fsf@email.froward.int.ebiederm.org
[1] https://lkml.kernel.org/r/87ftbiud6s.fsf@x220.int.ebiederm.org
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8bae637d3d5e082b4ced71e28b16eb3ee0683c1 upstream.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: 285892a74f13 ("remoteproc: Add Renesas rcar driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230320221826.2728078-4-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef074e805ecfd9a16dbb7b6b88bbfa8abad7054 upstream.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: b29b4249f8f0 ("remoteproc: imx_rproc: add i.MX specific parse fw hook")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-5-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0e01de8ee146986872e54e8365f4b4654819412 upstream.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-6-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a74918948b40317a5b5bab9739d13dcb5de2784 upstream.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: 3df52ed7f269 ("remoteproc: st: add reserved memory support")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-3-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccadca5baf5124a880f2bb50ed1ec265415f025b upstream.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-2-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
