IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit e184d42a6e085f95f5c4f1a4fbabebab2984cb68 ]
Move the reserved regions to account for a decrease in DRAM when ECC is
enabled. ECC takes 1/9th of memory.
Running on HW with ECC off, u-boot prints:
DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:off)
And with ECC on, u-boot prints:
DRAM: already initialized, 896 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:on, ECC size:896 MiB)
This implies that MCR54 is configured for ECC to be bounded at the
bottom of a 16MiB VGA memory region:
1024MiB - 16MiB (VGA) = 1008MiB
1008MiB / 9 (for ECC) = 112MiB
1008MiB - 112MiB = 896MiB (available DRAM)
The flash_memory region currently starts at offset 896MiB:
0xb8000000 (flash_memory offset) - 0x80000000 (base memory address) = 0x38000000 = 896MiB
This is the end of the available DRAM with ECC enabled and therefore it
needs to be moved.
Since the flash_memory is 64MiB in size and needs to be 64MiB aligned,
it can just be moved up by 64MiB and would sit right at the end of the
available DRAM buffer.
The ramoops region currently follows the flash_memory, but it can be
moved to sit above flash_memory which would minimize the address-space
fragmentation.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220916195535.1020185-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]
Switch port 6 is connected to eth0, so add appropriate device tree node for it.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]
This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ]
The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.
Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]
Interrupt 12 of the Interrupt controller belongs to the SMI controller,
the right one for the display controller is the interrupt 13.
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.
Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]
The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .
Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
One more last minute revert for a boot regression that was
found on the popular colibri-imx7.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOTUd0ACgkQmmx57+YA
GNnOFhAAmtry/kRqhEEdq7ZmLCYz1XKWOWWlaiFmfCpRoMqzV0UD1pvme1AYP1BR
cGksmgznFfvrT1+5/QJN1vteE3RbkSJ07feYjEIuRYnRfe4epNbSTbQDdN4r0Q02
cHt/HpV+cLX7UIN+3EyBVpHQGaMOQ7BkIMnkTe8M3lUugF340pgXh4Auk7Rv09Me
51+Lw1mrXbmropLbMawTD3Kg/83RnuMqeqshyPqA7jMA2/j9QaKyODzVRIlLQ8jH
Cv6HT5zCDYIupVv8IJa4CSu9BPx9U86ZisFHwJM+2+5lKpIGGI5kBIx7Y7gtTxHx
3KtOlyqDGfFInqQjJP+UUlW5N7SXmSfI/o9b2RFW/mtj6htSkpHkXRqOQ7VGN9hG
z6+nqBokWtzQFjJW4Rk1WqJGz3rLRHkOL+pgsf4r2AjxhkvQDskOdxlJKAQCUvXp
vd0YhENBkeo2LpKxAJWbBo2GCz+1ZXKg1waarn55OSXzAvK+YeFvA3/89t15csbo
ECYHecepJxfb8tOKds81ecQxqkckHzE+sV0LFCEH5SE5lgH8OOXLe9ZusUP/a1MH
ns+4HhTSx4FWkmmTSQjNFOvvq5NAfM6cx0ZJqpchjhGE6V8RJxaUjkpkWKvRbtay
2p+/dZRqVgiVTApZS+iv8hoC3oZHRB4cp4y9gFfTvjPrZ1ruGtM=
=3aYL
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Arnd Bergmann:
"One more last minute revert for a boot regression that was found on
the popular colibri-imx7"
* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: dts: imx7: Fix NAND controller size-cells"
This reverts commit 753395ea1e45c724150070b5785900b6a44bd5fb.
It introduced a boot regression on colibri-imx7, and potentially any
other i.MX7 boards with MTD partition list generated into the fdt by
U-Boot.
While the commit we are reverting here is not obviously wrong, it fixes
only a dt binding checker warning that is non-functional, while it
introduces a boot regression and there is no obvious fix ready.
Fixes: 753395ea1e45 ("ARM: dts: imx7: Fix NAND controller size-cells")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/
Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
these are incorrect clk data, like bad parent descriptions. When the clk
tree is improperly described things don't work, like USB and UFS
controllers, because clk frequencies are wonky. Here are the extra
details:
- Fix the parent of UFS reference clks on Qualcomm SC8280XP so that UFS
works properly.
- Fix the clk ID for USB on AT91 RM9200 so the USB driver continues to
probe.
- Stop using of_device_get_match_data() on the wrong device for a
Samsung Exynos driver so it gets the proper clk data.
- Fix ExynosAutov9 binding.
- Fix the parent of the div4 clk on Exynos7885.
- Stop calling runtime PM APIs from the Qualcomm GDSC driver directly
as it leads to a lockdep splat and is just plain wrong because it
violates runtime PM semantics by calling runtime PM APIs when the
device has been runtime PM disabled.
-----BEGIN PGP SIGNATURE-----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=EmWU
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk driver fixes that resolve issues for various SoCs.
Most of these are incorrect clk data, like bad parent descriptions.
When the clk tree is improperly described things don't work, like USB
and UFS controllers, because clk frequencies are wonky. Here are the
extra details:
- Fix the parent of UFS reference clks on Qualcomm SC8280XP so that
UFS works properly
- Fix the clk ID for USB on AT91 RM9200 so the USB driver continues
to probe
- Stop using of_device_get_match_data() on the wrong device for a
Samsung Exynos driver so it gets the proper clk data
- Fix ExynosAutov9 binding
- Fix the parent of the div4 clk on Exynos7885
- Stop calling runtime PM APIs from the Qualcomm GDSC driver directly
as it leads to a lockdep splat and is just plain wrong because it
violates runtime PM semantics by calling runtime PM APIs when the
device has been runtime PM disabled"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
ARM: at91: rm9200: fix usb device clock id
clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"
dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1
clk: qcom: gdsc: Remove direct runtime PM calls
clk: samsung: exynos7885: Correct "div4" clock parents
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmN+HtUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeUWB/9vfe0WO2RzXgDffFkKP5YBS63DU2ncTAgm
gx06SUg6RYCKfiRYAdDWa9GQm3TFV0JGm8WaxDd5xtmSQ41jfKFl1cTs14DkqWsB
xTj55BuIkSpJiYs36+gD+cWQFzAOkye7UxLweTU/PSdBoCwlupFo3JHmdPUHy51F
lAOI6IKYFhmwZqzOpkpRTljfCCViJh7OGMiqn3F22nQkjiRaKzTJYNnVmsjQHoSo
6qowVCmXuwS7lmOMQ5KZzydYPhuUCa/n15p2chJ2rEDBq4xIy0Mvo7lhnTnjU2nj
irT41S/Og3en54Tt+skutg7NK/Y999VSUjBrAVrKJg+l+yXxZJZl
=T2me
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Disabling of the unreliable arm-global-timer on earliest
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
* tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
make dtbs_check gives the following errors:
ref-clock-frequency: size (9) error for type uint32
tcxo-clock-frequency: size (9) error for type uint32
Fix it by passing the frequencies inside < > as documented in
Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Switch to usb-role-switch for fixing USB device mode on
tqma8mqml-mba8mx board, so that Dual Role is fully functional.
- A series from Marek Vasut to fix dt-schema warning caused by NAND
controller size-cells.
- Fix file permission of imx93-pinfunc header.
- Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang
issue.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmN0NT0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6iGgf9FbZmrz6eSj0PlizDdV/h/v7UHEHW
SGRKCPCHgeT/iznAuxnxiYEOyvgg/a1s9EZyubzDkXW3/lsm3orZPPduD7r75Iwh
CJ17nrgA0kBkWENV1K6OL9b+ZECFrZH3R4Tap0Qk7NFlJLubI0y3WbChTIr+nuyE
Kbc8C1Lb6QXZDz8JphpWfUH1dg6lkr/UN7vu+6wgyBaStYZMywv7XUbUGc5fDWpr
xLsKqyzygAvSaCkk4QVuBKESwzGQyJOtQvJGefFuUqab2aTx5YYfIashehLo9dD6
LjgzMFAYNMC79u+mTr1Bid4qwnRscZfhLF8Q2Gg7+BRZWcIHm1euvkrlDw==
=JZEa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Dfei
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.1, 2nd round:
- Switch to usb-role-switch for fixing USB device mode on
tqma8mqml-mba8mx board, so that Dual Role is fully functional.
- A series from Marek Vasut to fix dt-schema warning caused by NAND
controller size-cells.
- Fix file permission of imx93-pinfunc header.
- Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang
issue.
* tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Enable OCOTP clock before reading the register
arm64: dts: imx93-pinfunc: drop execution permission
arm64: dts: imx8mn: Fix NAND controller size-cells
arm64: dts: imx8mm: Fix NAND controller size-cells
ARM: dts: imx7: Fix NAND controller size-cells
arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
Link: https://lore.kernel.org/r/20221116090402.GA1274@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.
Recent changes to the arm_global_timer driver makes it impossible to use.
On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.
Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It contains:
- signal name fix for a pin on SAMA7G5
- memory self-refresh fix for SAMA7G5 by avoid soft resetting AC
DLL which can introduce glitches in RAM controller and lead to
unexpected behavior
- led support fix for lan966x-pcb8291 board by enabling sgpio node
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY2zi+AAKCRCejrg/N2X7
/RyZAQD0sVokdA9MKnPaap8zuXMnZd5yrQ7YMRYDn1puIscY3wEA98lZHOKlvVLW
+Ap3IUuFIEVwcrrIBGq7AZ0vIJjqxAE=
=uGGN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LTV+
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.1
It contains:
- signal name fix for a pin on SAMA7G5
- memory self-refresh fix for SAMA7G5 by avoid soft resetting AC
DLL which can introduce glitches in RAM controller and lead to
unexpected behavior
- led support fix for lan966x-pcb8291 board by enabling sgpio node
* tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
ARM: dts: at91: sama7g5: fix signal name of pin PB2
Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The NAND controller size-cells should be 0 per DT bindings.
Fix the following warning produces by DT bindings check:
"
nand-controller@33002000: #size-cells:0:0: 0 was expected
nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
"
Fix the missing space in node name too.
Fixes: e7495a45a76de ("ARM: dts: imx7: add GPMI NAND and APBH DMA")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the regulators node and define fixed regulators in the root node.
Prevents the sdhci-omap driver from waiting in probe deferral forever
because of the missing vmmc-supply and keeps am335x-pcm-953 consistent with
the other Phytec AM335 boards.
Fixes: bb07a829ec38 ("ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board")
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Message-Id: <20221011143115.248003-1-d.haller@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
Fixes: 8c596324232d ("dt-bindings: thermal: Fix missing required property")
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable sgpio node on pcb8291 as this is needed to be able to control
the LEDs on this board. Otherwise the LEDs support on the board will
not be available.
On the other board pcb8309 the sgpio is already enabled because it
needed to access the SFP ports.
Fixes: 0b7baa1a307f ("ARM: dts: lan966x: add led configuration")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221026174303.702919-1-horatiu.vultur@microchip.com
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
Fixes: 0de4ab81ab26 ("ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board")
Cc: petrben@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Petr Benes <petr.benes@ysoft.com>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW5910 and GW5913 have a user pushbutton that is tied to the
Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0.
Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The signal name of pin PB2 with function F is FLEXCOM11_IO1
as it is defined in the datasheet.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221017083119.1643-1-mihai.sain@microchip.com
The main changes this time are for the organization of the Kconfig
files, introducing per-vendor top-level options on arm64 to match
those on arm32, and making the platform selection on arm32 more
uniform, in particular for the remaining StrongARM platforms that
still have a couple of special cases compared to the more recent
ones.
I also did a cleanup of the old Footbridge platform, which was
the last holdout for the phys_to_dma()/dma_to_phys() interface
that is now completely gone from arm32, completing work started
by Christoph Hellwig.
-----BEGIN PGP SIGNATURE-----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=xsKV
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The main changes this time are for the organization of the Kconfig
files, introducing per-vendor top-level options on arm64 to match
those on arm32, and making the platform selection on arm32 more
uniform, in particular for the remaining StrongARM platforms that
still have a couple of special cases compared to the more recent ones.
I also did a cleanup of the old Footbridge platform, which was the
last holdout for the phys_to_dma()/dma_to_phys() interface that is now
completely gone from arm32, completing work started by Christoph
Hellwig"
* tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: aspeed: Kconfig: Fix indentation
ARM: Drop CMDLINE_* dependency on ATAGS
ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORM
ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h
pxa: Drop if with an always false condition
ARM: orion: fix include path
ARM: shmobile: Drop selecting SOC_BUS
arm64: renesas: Drop selecting SOC_BUS
ARM: disallow PCI with MMU=n again
ARM: footbridge: remove custom DMA address handling
MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
ARM: footbridge: move isa-dma support into footbridge
ARM: footbridge: remove leftover from personal-server
ARM: footbridge: remove addin mode
arm64: Kconfig.platforms: Group NXP platforms together
arm64: Kconfig.platforms: Re-organized Broadcom menu
ARM: make ARCH_MULTIPLATFORM user-visible
ARM: fix XIP_KERNEL dependencies
ARM: Kconfig: clean up platform selection
ARM: simplify machdirs/platdirs handling
...
Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the most
updates, which corresponds to their dominance in the mobile phone and
embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial
and automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels,
as they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere
Mt. Mitchell
- Three new machines based on Rockchips RK3399 and RK3566:
Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family:
SAMA5D3-EDS and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs.
-----BEGIN PGP SIGNATURE-----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=xPfV
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the
most updates, which corresponds to their dominance in the mobile phone
and embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial and
automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels, as
they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt.
Mitchell
- Three new machines based on Rockchips RK3399 and RK3566: Anberic
RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family: SAMA5D3-EDS
and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs"
* tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits)
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
...
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Adding the #address-cells/#size-cells properties without also
adding the other required properties for PCI nodes causes new
build warnings from dtc that now show up everywhere, rather than
just while verifying the yaml bindings:
arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Revert it for now.
Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
-----BEGIN PGP SIGNATURE-----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=Se/Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HF5T
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
* tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
Various fixes across several hardening areas:
- loadpin: Fix verity target enforcement (Matthias Kaehlcke).
- zero-call-used-regs: Add missing clobbers in paravirt (Bill Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van Assche).
- Clang: Adjust compiler flag detection for various Clang changes (Sami
Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning.
-----BEGIN PGP SIGNATURE-----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=HZ6+
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
"Most of the collected changes here are fixes across the tree for
various hardening features (details noted below).
The most notable new feature here is the addition of the memcpy()
overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
on the path to killing the common class of "trivially detectable"
buffer overflow conditions (i.e. on arrays with sizes known at compile
time) that have resulted in many exploitable vulnerabilities over the
years (e.g. BleedingTooth).
This feature is expected to still have some undiscovered false
positives. It's been in -next for a full development cycle and all the
reported false positives have been fixed in their respective trees.
All the known-bad code patterns we could find with Coccinelle are also
either fixed in their respective trees or in flight.
The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN
for cross-field memcpy()") for the feature has extensive details, but
I'll repeat here that this is a warning _only_, and is not intended to
actually block overflows (yet). The many patches fixing array sizes
and struct members have been landing for several years now, and we're
finally able to turn this on to find any remaining stragglers.
Summary:
Various fixes across several hardening areas:
- loadpin: Fix verity target enforcement (Matthias Kaehlcke).
- zero-call-used-regs: Add missing clobbers in paravirt (Bill
Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van
Assche).
- Clang: Adjust compiler flag detection for various Clang changes
(Sami Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning"
* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
sparc: Unbreak the build
x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
x86/paravirt: clean up typos and grammaros
fortify: Convert to struct vs member helpers
fortify: Explicitly check bounds are compile-time constants
x86/entry: Work around Clang __bdos() bug
ARM: decompressor: Include .data.rel.ro.local
fortify: Adjust KUnit test for modular build
sh: machvec: Use char[] for section boundaries
kunit/memcpy: Avoid pathological compile-time string size
lib: Improve the is_signed_type() kunit test
LoadPin: Require file with verity root digests to have a header
dm: verity-loadpin: Only trust verity targets with enforcement
LoadPin: Fix Kconfig doc about format of file with verity digests
um: Enable FORTIFY_SOURCE
lkdtm: Update tests for memcpy() run-time warnings
fortify: Add run-time WARN for cross-field memcpy()
fortify: Use SIZE_MAX instead of (size_t)-1
...
Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE
-----BEGIN PGP SIGNATURE-----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=OXHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9243/1: riscpc: Unbreak the build