IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit d5252d9697a3e7007c741e9c103073868955a304 ]
The clock dividers might be used with clock stop bit enabled or not.
Current tables only support recommended values from the datasheet. This
might result in warnings like below because no valid clock divider is
found. Resulting in a 0 divider.
There are Renesas ARM Trusted Firmware version out there which e.g.
configure 0x201 (shifted logical right by 2: 0x80) and with this match
the added { STPnHCK | 0, 1 }:
https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/drivers/renesas/rcar/emmc/emmc_init.c#L108
------------[ cut here ]------------
sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1
Hardware name: Custom board based on r8a7796 (DT)
pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : divider_recalc_rate+0x48/0x70
...
------------[ cut here ]------------
Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[wsa: extended the table to 5 entries, added comments, reword commit message a little]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230928080317.28224-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15cee75dacb82ade710d61bfd536011933ef9bf2 ]
Move the elcdif_pll clock initialization before the lcd_clk, since the
elcdif_clk needs to be initialized ahead of lcd_clk, being its parent.
This change fixes issues with the LCD clocks during suspend/resume.
Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks")
Suggested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-2-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 577ad169966e6e75b10e004389a3f79813e84b5d ]
Avoid memory leak in error handling path. It does not make
much sense for the SoC without clk driver, to make program behavior
correct, let's fix it.
Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309240551.e46NllPa-lkp@intel.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231001122618.194498-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 317e69c49b4ceef8aebb47d771498ccb3571bdf9 ]
If the i.MX8QXP clock provider is built-in but the MXC_CLK is
built as module, build fails:
aarch64-linux-ld: drivers/clk/imx/clk-imx8-acm.o: in function `imx8_acm_clk_probe':
clk-imx8-acm.c:(.text+0x3d0): undefined reference to `imx_check_clk_hws'
Fix that by selecting MXC_CLK in case of CLK_IMX8QXP.
Fixes: c2cccb6d0b33 ("clk: imx: add imx8qxp clk driver")
Closes: https://lore.kernel.org/all/8b77219e-b59e-40f1-96f1-980a0b2debcf@infradead.org/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7442edec72bc657e6ce38ae01de9f10e55decfaa ]
The MT6358 and MT6366 PMICs, and likely many others from MediaTek, have
a chip ID register, making the chip semi-discoverable.
The driver currently supports two PMICs and expects to be probed on one
or the other. It does not account for incorrect mfd driver entries or
device trees. While these should not happen, if they do, it could be
catastrophic for the device. The driver should be sure the hardware is
what it expects.
Make the driver fail to probe if the chip ID presented is not a known
one.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f0e3c6261af1 ("regulator: mt6366: Add support for MT6366 regulator")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230913082919.1631287-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fc62c8347397faf4e18249e88ecd4470c0a5357 ]
The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the
HW_CTRL flag (it's separate from hw_ctrl_addr). In addition to that,
it should feature a cxc entry for bimc_smmu_axi_clk and be marked as
votable.
Fix all of these issues.
Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-5-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9906c4140897bbdbff7bb71c6ae67903cb9954ce ]
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-4-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b7d30158cff246667273bd2a62fc93ee0725d2 ]
If the parent clock rate is greater than unsigned long max/2 then
integer overflow happens when calculating the clock rate on 32-bit systems.
As RCG2 uses half integer dividers, the clock rate is first being
multiplied by 2 which will overflow the unsigned long max value.
Hence, replace the common pattern of doing 64-bit multiplication
and then a do_div() call with simpler mult_frac call.
Fixes: bcd61c0f535a ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com
[bjorn: Also drop unnecessary {} around single statements]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4afda5f6bcdf673ef2556fcfa458daf3a5a648d8 ]
The GCC driver contains clocks that are owned (meaning configured and
scaled) by the RPM core.
Remove them from Linux to stop interjecting the RPM's logic.
Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-rpmbusclocks8996gcc-v1-1-9e99bedcdc3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb9913b511f10968a02cfa5329a896855dd152a3 ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
Fixes: dc4dc3605639 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/tencent_73FCC06A3D1C14EE5175253C6FB46A07B709@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3601857e14de6369f00ae19564f1d817d175d19 ]
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes: f0c2319f9f19 ("regmap: Expose the driver name in debugfs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8595de2462c490561f70020a6d11f4d6b652b468.1693857825.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff672b9ffeb3f82135488ac16c5c5eb4b992999b ]
Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound()
increment dev->stats.tx_errors in case of errors.
Unfortunately there are two issues :
1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user.
2) Increments are not atomic. KCSAN would complain eventually.
Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64()
to copy the value back to user.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b068c714ca9479d2783cc333fff5bc2d4a6d45c ]
Companion of DEV_STATS_INC() & DEV_STATS_ADD().
This is going to be used in the series.
Use it in macsec_get_stats64().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ff672b9ffeb3 ("ipvlan: properly track tx_errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d6c848bfb406e9ef6d9846d759e97beaeea113 ]
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf [1]
Fixes: b210de4f8c97 ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48cf49d31994ff97b33c4044e618560ec84d35fb ]
snprintf() does not return negative values on error.
To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.
Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d35381aa73f7e1e8b25f3ed5283287a64d9ddff5 ]
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658939fc68d3241f9a0019e224cd7154438c23f2 ]
If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.
Fixes: a44509805895 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37fb29bd1f90f16d1abc95c0e9f0ff8eec9829ad ]
When we want to synchronize the NAPI, which was added in
commit 5af2bb3168db ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.
Fixes: 4cf2f5904d97 ("iwlwifi: queue: avoid memory leak in reset flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af2bb3168db6b0af9988eb25cccf2e3bc4455e2 ]
When rx/tx queues are being freed, on a different CPU there could be
still rx flow running. Call napi_synchronize() to prevent such a race.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73ed8e03388d16c12fc577e5c700b58a29045a15 ]
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 225d9ddbacb102621af6d28ff7bf5a0b4ce249d8 ]
tp->rcv_tstamp should be set to tcp_jiffies, not tcp_time_stamp().
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4eee56e14fe001e1cff54f0b438a5e2d0dd7454 ]
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf791b22bef7d9352ff730a8727d3871942d6001 ]
This patch adds a test case to reproduce the SCTP DATA chunk retransmission
timeout issue caused by the improper SCTP collision processing in netfilter
nf_conntrack_proto_sctp.
In this test, client sends a INIT chunk, but the INIT_ACK replied from
server is delayed until the server sends a INIT chunk to start a new
connection from its side. After the connection is complete from server
side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp.
The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead
of updating the vtag with the out-of-date init_tag, otherwise, the vtag
in DATA chunks later sent by client don't match the vtag in the conntrack
entry and the DATA chunks get dropped.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: c4eee56e14fe ("net: skb_find_text: Ignore patterns extending past 'to'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 621735f590643e3048ca2060c285b80551660601 ]
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b6c6065fca123d419afef005a696f51e6590470 ]
The open code is defined as a helper function(tp_to_dev) on r8169_main.c,
which the open code is &tp->pci_dev->dev. The helper function was added
in commit 1e1205b7d3e9 ("r8169: add helper tp_to_dev"). And then later,
commit f1e911d5d0df ("r8169: add basic phylib support") added
r8169_phylink_handler function but it didn't use the helper function.
Thus, tp_to_dev() replaces the open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20221129161244.5356-1-claudiajkang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c99626092efca3061b387043d4a7399bf75fbdd5 ]
The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX. If it's too high then these sprintf()s will overflow.
Fixes: 203d3d4aa482 ("the generic thermal sysfs driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30fa41a0f6df4c85790cc6499ddc4a926a113bfa ]
None of the dump callbacks uses netlink_callback::args beyond the first
element, no need to zero the data.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea2274ab0b18549dbf0e755e41d8c5e8b5232dc3 ]
When frames are sent over the air, the device always applies the data
rates in descending order. The driver assumed Minstrel also provided
rate in descending order.
However, in some cases, Minstrel can a choose a fallback rate greater
than the primary rate. In this case, the two rates was inverted, the
device try highest rate first and we get many retries.
Since the device always applies rates in descending order, the
workaround is to drop the rate when it higher than its predecessor in
the rate list. Thus [ 4, 5, 3 ] becomes [ 4, 3 ].
This patch has been tested in isolated room with a series of
attenuators. Here are the Minstrel statistics with 80dBm of attenuation:
Without the fix:
best ____________rate__________ ____statistics___ _____last____ ______sum-of________
mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts]
HT20 LGI 1 S MCS0 0 1477 5.6 5.2 82.7 3 0 0 3 4
HT20 LGI 1 MCS1 1 738 10.6 0.0 0.0 0 0 0 0 1
HT20 LGI 1 D MCS2 2 492 14.9 13.5 81.5 5 0 0 5 9
HT20 LGI 1 C MCS3 3 369 18.8 17.6 84.3 5 0 0 76 96
HT20 LGI 1 A P MCS4 4 246 25.4 22.4 79.5 5 0 0 11268 14026
HT20 LGI 1 B S MCS5 5 185 30.7 19.7 57.7 5 8 9 3918 9793
HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 5 0 0 6 102
HT20 LGI 1 MCS7 7 148 35.1 0.0 0.0 0 0 0 0 44
With the fix:
best ____________rate__________ ____statistics___ _____last____ ______sum-of________
mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts]
HT20 LGI 1 S MCS0 0 1477 5.6 1.8 28.6 1 0 0 1 5
HT20 LGI 1 DP MCS1 1 738 10.6 9.7 82.6 4 0 0 14 34
HT20 LGI 1 MCS2 2 492 14.9 9.2 55.4 5 0 0 52 77
HT20 LGI 1 B S MCS3 3 369 18.8 15.6 74.9 5 1 1 417 554
HT20 LGI 1 A MCS4 4 246 25.4 16.7 59.2 5 1 1 13812 17951
HT20 LGI 1 C S MCS5 5 185 30.7 14.0 41.0 5 1 5 57 640
HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 0 0 1 0 48
HT20 LGI 1 S MCS7 7 148 35.1 0.0 0.0 0 0 0 0 36
We can notice the device try now to send with lower rates (and high
success rates). At the end, we measured 20-25% better throughput with
this patch.
Fixes: 9bca45f3d692 ("staging: wfx: allow to send 802.11 frames")
Tested-by: Olivier Souloumiac <olivier.souloumiac@silabs.com>
Tested-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Reported-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Co-developed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Felipe Negrelli Wolter <felipe.negrelliwolter@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004123039.157112-1-jerome.pouiller@silabs.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0731c05c985deb68a97fa44c1adcd3305dda90 ]
As a matter of fact the regmap_pmu already is mandatory because
it is used unconditionally in the driver. Bail out gracefully in
probe() rather than crashing later.
Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/
Fixes: b9d1262bca0af ("PM / devfreq: event: support rockchip dfi controller")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6411959c10fe917288cbb1038886999148560057 ]
If the "struct can_priv::echoo_skb" is accessed out of bounds, this
would cause a kernel crash. Instead, issue a meaningful warning
message and return with an error.
Fixes: a6e4bc530403 ("can: make the number of echo skb's configurable")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-5-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6841cab8c4504835e4011689cbdb3351dec693fd ]
This race condition was discovered while updating the at91_can driver
to use can_bus_off(). The following scenario describes how the
converted at91_can driver would behave.
When a CAN device goes into BUS-OFF state, the driver usually
stops/resets the CAN device and calls can_bus_off().
This function sets the netif carrier to off, and (if configured by
user space) schedules a delayed work that calls can_restart() to
restart the CAN device.
The can_restart() function first checks if the carrier is off and
triggers an error message if the carrier is OK.
Then it calls the driver's do_set_mode() function to restart the
device, then it sets the netif carrier to on. There is a race window
between these two calls.
The at91 CAN controller (observed on the sama5d3, a single core 32 bit
ARM CPU) has a hardware limitation. If the device goes into bus-off
while sending a CAN frame, there is no way to abort the sending of
this frame. After the controller is enabled again, another attempt is
made to send it.
If the bus is still faulty, the device immediately goes back to the
bus-off state. The driver calls can_bus_off(), the netif carrier is
switched off and another can_restart is scheduled. This occurs within
the race window before the original can_restart() handler marks the
netif carrier as OK. This would cause the 2nd can_restart() to be
called with an OK netif carrier, resulting in an error message.
The flow of the 1st can_restart() looks like this:
can_restart()
// bail out if netif_carrier is OK
netif_carrier_ok(dev)
priv->do_set_mode(dev, CAN_MODE_START)
// enable CAN controller
// sama5d3 restarts sending old message
// CAN devices goes into BUS_OFF, triggers IRQ
// IRQ handler start
at91_irq()
at91_irq_err_line()
can_bus_off()
netif_carrier_off()
schedule_delayed_work()
// IRQ handler end
netif_carrier_on()
The 2nd can_restart() will be called with an OK netif carrier and the
error message will be printed.
To close the race window, first set the netif carrier to on, then
restart the controller. In case the restart fails with an error code,
roll back the netif carrier to off.
Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-2-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe5c9940dfd8ba0c73672dddb30acd1b7a11d4c7 ]
During testing, I triggered a can_restart() with the netif carrier
being OK [1]. The BUG_ON, which checks if the carrier is OK, results
in a fatal kernel crash. This is neither helpful for debugging nor for
a production system.
[1] The root cause is a race condition in can_restart() which will be
fixed in the next patch.
Do not crash the kernel, issue an error message instead, and continue
restarting the CAN device anyway.
Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-1-91b5c1fd922c@pengutronix.de
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77f1ee6fd8b6e470f721d05a2e269039d5cafcb7 ]
Tx power is fetched from firmware's pdev stats. However, during active
CAC, firmware does not fill the current Tx power and sends the max
initialised value filled during firmware init. If host sends this power
to user space, this is wrong since in certain situations, the Tx power
could be greater than the max allowed by the regulatory. Hence, host
should not be fetching the Tx power during an active CAC.
Fix this issue by returning -EAGAIN error so that user space knows that there's
no valid value available.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: 9a2aa68afe3d ("wifi: ath11k: add get_txpower mac ops")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230912051857.2284-4-quic_adisi@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a341c9b25da6a479bd8013bcb11a680a7233e3 ]
Toshiba Portégé R100 has both acpi_video and toshiba_acpi vendor
backlight driver working. But none of them gets activated as it has
a VGA with no kernel driver (Trident CyberBlade XP4m32).
The DMI strings are very generic ("Portable PC") so add a custom
callback function to check for Trident CyberBlade XP4m32 PCI device
before enabling the vendor backlight driver (better than acpi_video
as it has more brightness steps).
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 046ece773cc77ef5d2a1431b188ac3d0840ed150 ]
In accordance with ACPI specificication and _DSD data buffer
representation the data there is an array of bytes. Hence,
accessing it with something longer will create a sparse data
which is against of how device property APIs work in general
and also not defined in the ACPI specification (see [1]).
Fix the code to emit an error if non-byte accessor is used to
retrieve _DSD buffer data.
Fixes: 369af6bf2c28 ("ACPI: property: Read buffer properties as integers")
Link: https://uefi.org/specs/ACPI/6.5/19_ASL_Reference.html#buffer-declare-buffer-object # [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Add missing braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3391ee7f9ea508c375d443cd712c2e699be235b4 ]
In 'rtl92c_dm_check_edca_turbo()', 'rtl88e_dm_check_edca_turbo()',
and 'rtl8723e_dm_check_edca_turbo()', the DL limit should be set
from the corresponding field of 'rtlpriv->btcoexist' rather than
UL. Compile tested only.
Fixes: 0529c6b81761 ("rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek version")
Fixes: c151aed6aa14 ("rtlwifi: rtl8188ee: Update driver to match Realtek release of 06282014")
Fixes: beb5bc402043 ("rtlwifi: rtl8192c-common: Convert common dynamic management routines for addition of rtl8192se and rtl8192de")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230928052327.120178-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a135798e6e200ecb2f864cecca6d257ba278370c ]
tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081480014a64a69d901f8ef1ffdd56d6085cf87e ]
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.
Fixes: 9ad7c049f0f7 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc3a153222805d65f821e10f4f78b6afce06f86 ]
When removing an item from RCU protected list, we must prevent
store-tearing, using rcu_assign_pointer() or WRITE_ONCE().
Fixes: 04f721c671656 ("tcp_metrics: Rewrite tcp_metrics_flush_all")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79bd60ee87e1136718a686d6617ced5de88ee350 ]
If an error occurs and channel_detector_exit() is called, it relies on
entries of the 'detectors' array to be NULL.
Otherwise, it may access to un-initialized memory.
Fix it and initialize the memory, as what was done before the commit in
Fixes.
Fixes: a063b650ce5d ("ath: dfs_pattern_detector: Avoid open coded arithmetic in memory allocation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/ad8c55b97ee4b330cb053ce2c448123c309cc91c.1695538105.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced1a0b8f3944e44e7f4eb3772dea1bada25d38a ]
Without this patch, when ap sets the tx stream number to 2,
ap won't send any beamforming packet.
Fixes: f89f297aef28 ("mt76: mt7915: fix txbf starec TLV issues")
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3176205933494bd184c6acd70e796c382bc729b5 ]
Before preparing the new beacon, check the queue status, flush out all
previous beacons and buffered multicast packets, then (if necessary)
try to recover more gracefully from a stuck beacon condition by making a
less invasive attempt at getting the MAC un-stuck.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c677dda165231c3efffb9de4bace249d5d2a51b9 ]
Only trigger PSE reset if PSE was stuck, otherwise it can cause DMA issues.
Trigger the PSE reset while DMA is fully stopped in order to improve
reliabilty.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baa19b2e4b7bbb509a7ca7939c8785477dcd40ee ]
It turns out that the code in mt7603_rx_pse_busy() does not detect actual
hardware hangs, it only checks for busy conditions in PSE.
A reset should only be performed if these conditions are true and if there
is no rx activity as well.
Reset the counter whenever a rx interrupt occurs. In order to also deal with
a fully loaded CPU that leaves interrupts disabled with continuous NAPI
polling, also check for pending rx interrupts in the function itself.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39564b475ac5a589e6c22c43a08cbd283c295d2c ]
Commit 5b32b6dd96633 ("ath11k: Remove core PCI references from
PCI common code") breaks with one MSI vector because it moves
affinity setting after IRQ request, see below log:
[ 1417.278835] ath11k_pci 0000:02:00.0: failed to receive control response completion, polling..
[ 1418.302829] ath11k_pci 0000:02:00.0: Service connect timeout
[ 1418.302833] ath11k_pci 0000:02:00.0: failed to connect to HTT: -110
[ 1418.303669] ath11k_pci 0000:02:00.0: failed to start core: -110
The detail is, if do affinity request after IRQ activated,
which is done in request_irq(), kernel caches that request and
returns success directly. Later when a subsequent MHI interrupt is
fired, kernel will do the real affinity setting work, as a result,
changs the MSI vector. However at that time host has configured
old vector to hardware, so host never receives CE or DP interrupts.
Fix it by setting affinity before registering MHI controller
where host is, for the first time, doing IRQ request.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1
Fixes: 5b32b6dd9663 ("ath11k: Remove core PCI references from PCI common code")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230907015606.16297-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74f7957c9b1b95553faaf146a2553e023a9d1720 ]
Since debugfs_create_file() return ERR_PTR and never return NULL, so use
IS_ERR() to check it instead of checking NULL.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919050651.962694-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c80471ba74b7f332ac19b985ccb76d852d507acf ]
Fix MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH and
MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH definitions for MT7986 (MT7986 is
the only SoC to use them).
Fixes: de84a090d99a ("net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
