IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 53223f2ed1ef5c90dad814daaaefea4e68a933c8 ]
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1e0e61d617ba17aa516db707aa871387566bbf7 ]
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes: cf5cb79f6946 ("[XFRM] netlink: Establish an attribute policy")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75065a8929069bc93181848818e23f147a73f83a ]
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes: 37bd22420f85 ("af_key: pfkey_dump needs parameter validation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f0a9816f5fbc1316355ec1aa4ddfb9b624cca5 ]
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833bac7ec392bf75053c8a4fa4c36d4148dac77d ]
Commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") introduced the net.smc.rmem and net.smc.wmem
sysctls to specify the size of buffers to be used for SMC type
connections. This created a regression for users that specified the
buffer size via setsockopt() as the effective buffer size was now
doubled.
Re-introduce the division by 2 in the SMC buffer create code and level
this out by duplicating the net.smc.[rw]mem values used for initializing
sk_rcvbuf/sk_sndbuf at socket creation time. This gives users of both
methods (setsockopt or sysctl) the effective buffer size that they
expect.
Initialize net.smc.[rw]mem from its own constant of 64kB, respectively.
Internal performance tests show that this value is a good compromise
between throughput/latency and memory consumption. Also, this decouples
it from any tuning that was done to net.ipv4.tcp_[rw]mem[1] before the
module for SMC protocol was loaded. Check that no more than INT_MAX / 2
is assigned to net.smc.[rw]mem, in order to avoid any overflow condition
when that is doubled for use in sk_sndbuf or sk_rcvbuf.
While at it, drop the confusing sk_buf_size variable from
__smc_buf_create and name "compressed" buffer size variables more
consistently.
Background:
Before the commit mentioned above, SMC's buffer allocator in
__smc_buf_create() always used half of the sockets' sk_rcvbuf/sk_sndbuf
value as initial value to search for appropriate buffers. If the search
resorted to using a bigger buffer when all buffers of the specified
size were busy, the duplicate of the used effective buffer size is
stored back to sk_rcvbuf/sk_sndbuf.
When available, buffers of exactly the size that a user had specified as
input to setsockopt() were used, despite setsockopt()'s documentation in
"man 7 socket" talking of a mandatory duplication:
[...]
SO_SNDBUF
Sets or gets the maximum socket send buffer in bytes.
The kernel doubles this value (to allow space for book‐
keeping overhead) when it is set using setsockopt(2),
and this doubled value is returned by getsockopt(2).
The default value is set by the
/proc/sys/net/core/wmem_default file and the maximum
allowed value is set by the /proc/sys/net/core/wmem_max
file. The minimum (doubled) value for this option is
2048.
[...]
Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Co-developed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff7bfed9097435ea38de919befbe2d7771a3e87 ]
It's clear that rmbs_lock and sndbufs_lock are aims to protect the
rmbs list or the sndbufs list.
During connection establieshment, smc_buf_get_slot() will always
be invoked, and it only performs read semantics in rmbs list and
sndbufs list.
Based on the above considerations, we replace mutex with rw_semaphore.
Only smc_buf_get_slot() use down_read() to allow smc_buf_get_slot()
run concurrently, other part use down_write() to keep exclusive
semantics.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 833bac7ec392 ("net/smc: Fix setsockopt and sysctl to specify same buffer size again")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 11b73313c12403f617b47752db0ab3deef201af7 upstream.
In blamed commit, I missed that get_dist_table() was allocating
memory using GFP_KERNEL, and acquiring qdisc lock to perform
the swap of newly allocated table with current one.
In this patch, get_dist_table() is allocating memory and
copy user data before we acquire the qdisc lock.
Then we perform swap operations while being protected by the lock.
Note that after this patch netem_change() no longer can do partial changes.
If an error is returned, qdisc conf is left unchanged.
Fixes: 2174a08db80d ("sch_netem: acquire qdisc lock in netem_change()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1689f25924ada8fe14a4a82c38925d04994c7142 upstream.
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8743aeff5bc4dcb5b87b43765f48d5ac3ad7dd9f upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10d3d9df49d9e6ee244fda6ca264f901a9c5d85 upstream.
rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging
to a specific resilient nexthop group. The function returns a positive
return code (the skb length) upon both success and failure.
The above behavior is problematic. When a complete nexthop bucket dump
is requested, the function that walks the different nexthops treats the
non-zero return code as an error. This causes buckets belonging to
different resilient nexthop groups to be dumped using different buffers
even if they can all fit in the same buffer:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 10 index 0 idle_time 10.27 nhid 1
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 20 index 0 idle_time 6.44 nhid 1
[...]
Fix by only returning a non-zero return code when an error occurred and
restarting the dump from the bucket index we failed to fill in. This
allows buckets belonging to different resilient nexthop groups to be
dumped using the same buffer:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 30.21 nhid 1
id 20 index 0 idle_time 26.7 nhid 1
[...]
While this change is more of a performance improvement change than an
actual bug fix, it is a prerequisite for a subsequent patch that does
fix a bug.
Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 913f60cacda73ccac8eead94983e5884c03e04cd upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.
# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:
# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: ab84be7e54fc ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b47808f223c70ff564f9b363446d2a5fa1e05b2 upstream.
TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.
Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.
The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.
We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".
Allocate a single dummy page and use it as fallback.
Found by code inspection, and proven by forcing allocation
failures.
Fixes: e7b159a48ba6 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a47e598fbd8617967e49d85c49c22f9fc642704c upstream.
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85c2c79a07302fe68a1ad5cc449458cc559e314d upstream.
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a7ac3d20593865209dceb554d8b3f094c6bd940 upstream.
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30c3c4a4497c3765bf6b298f5072c8165aeaf7cc upstream.
Tuning of the effective buffer size through setsockopts was working for
SMC traffic only but not for TCP fall-back connections even before
commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and
make them tunable"). That change made it apparent that TCP fall-back
connections would use net.smc.[rw]mem as buffer size instead of
net.ipv4_tcp_[rw]mem.
Amend the code that copies attributes between the (TCP) clcsock and the
SMC socket and adjust buffer sizes appropriately:
- Copy over sk_userlocks so that both sockets agree on whether tuning
via setsockopt is active.
- When falling back to TCP use sk_sndbuf or sk_rcvbuf as specified with
setsockopt. Otherwise, use the sysctl value for TCP/IPv4.
- Likewise, use either values from setsockopt or from sysctl for SMC
(duplicated) on successful SMC connect.
In smc_tcp_listen_work() drop the explicit copy of buffer sizes as that
is taken care of by the attribute copy.
Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17ebf8a4c38b5481c29623f5e003fdf7583947f9 upstream.
Coccicheck reports the error below:
net/mptcp/protocol.c:3330:15-28: ERROR: test of a variable/field address
Since the address of msk->cb_flags is used in __test_and_clear_bit, the
address should not be NULL. The judgment for if (unlikely(msk->cb_flags))
will always be true, we should check the real value of msk->cb_flags here.
Fixes: 65a569b03ca8 ("mptcp: optimize release_cb for the common case")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803072438.1847500-1-xiangyang3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 809e4dc71a0f2b8d2836035d98603694fff11d5d upstream.
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e96ec0e6605b69bb21bbf6c0ff9051e656ec2b1 upstream.
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d14eea09edf427fa36bd446f4a3271f99164202f upstream.
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).
Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).
Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d8355 ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 511b90e39250135a7f900f1c3afbce25543018a2 upstream.
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.
Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff18f9ef30ee87740f741b964375d0cfb84e1ec2 upstream.
Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().
That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 048c796beb6eb4fa3a5a647ee1c81f5c6f0f6a2a upstream.
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6311071a056272e1e761de8d0305e87cc566f734 upstream.
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs.
Cc: stable@vger.kernel.org
Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode")
Signed-off-by: Keith Yeo <keithyjy@gmail.com>
Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6e2843230799230fc5deb8279728a7218b0d63c upstream.
If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.
Introduce an additional timeout, derived from the specified notify
timeout. While at it, switch both waits to killable which is more
correct.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddf251fa2bc1d3699eec0bae6ed0bc373b8fda79 ]
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().
We need to acquire fastopen_seqlock to maintain consistency.
For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.
Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d986ce42c71a7562d32c4e21e026b0f87befec ]
tm->tcpm_net can be read or written locklessly.
Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().
Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c4d04f6b443869d25e59822f7cec88d647028a9 ]
tm->tcpm_vals[] values can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 285ce119a3c6c4502585936650143e54c8692788 ]
tm->tcpm_lock can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 949ad62a5d5311d36fce2e14fe5fed3f936da51c ]
tm->tcpm_stamp can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Also constify tcpm_check_stamp() dst argument.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6638094d7af6c7b9dcca05ad009e79e31b4f670 ]
Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.
tcp_metrics use a common hash table, where entries can have different
families.
We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.
Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31d49ba033095f6e8158c60f69714a500922e0c3 ]
The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code
static int dcbnl_bcn_setcfg(...)
{
...
ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
// !!! dcbnl_pfc_up_nest for attributes
// DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
...
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
// !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
...
value_byte = nla_get_u8(data[i]);
...
}
...
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
// !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
...
value_int = nla_get_u32(data[i]);
...
}
...
}
That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".
static const struct nla_policy dcbnl_pfc_up_nest[...] = {
[DCB_PFC_UP_ATTR_0] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_1] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_2] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_3] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_4] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_5] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_6] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_7] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};
static const struct nla_policy dcbnl_bcn_nest[...] = {
[DCB_BCN_ATTR_RP_0] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_1] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_2] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_3] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_4] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_5] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_6] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_7] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG},
// from here is somewhat different
[DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32},
...
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.
Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.
Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d2618b48f15966d1adfe1ff6a1985f5eef40ba ]
Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).
This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.
preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit 99ba2b5aba24e ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.
Remove preempt_disable to fix BUG in sock_map_update_common on RT.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes: 99ba2b5aba24 ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b80b829e9e2c1b3f7aae34855e04d8f6ecaf13c8 ]
When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76e42ae831991c828cffa8c37736ebfb831ad5ec ]
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: e35a8ee5993b ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3044b16e7c6fe5d24b1cdbcf1bd0a9d92d1ebd81 ]
When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: de5df63228fc ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e739718444f7bf2fa3d70d101761ad83056ca628 ]
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf43be799d4b242ea552a14db10456446be843e ]
sk_getsockopt() runs locklessly. This means sk->sk_priority
can be read while other threads are changing its value.
Other reads also happen without socket lock being held.
Add missing annotations where needed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5f0d2dd3c2faa671711dac6d3ff3cef307bcfe3 ]
In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.
Fixes: 0dbffbb5335a ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11695c6e966b0ec7ed1d16777d294cef865a5c91 ]
sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.
While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().
Fixes: b9bb53f3836f ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c5b4d69c358a9275a8de98f87caf6eda644b086 ]
sk->sk_mark is often read while another thread could change the value.
Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b553253091cafe9ec38994acf42795e073bef5 ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.
Fixes: ebb3b78db7bf ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74bc084327c643499474ba75df485607da37dd6e ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.
Fixes: e292f05e0df7 ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6d12bdb435d23ff6c1890c852d85408a2f496ee ]
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvlowat locklessly.
Fixes: eac66402d1c3 ("net: annotate sk->sk_rcvlowat lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea7f45ef77b39e72244d282e47f6cb1ef4135cd2 ]
sk_getsockopt() runs locklessly. This means sk->sk_max_pacing_rate
can be read while other threads are changing its value.
Fixes: 62748f32d501 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengchao Shao
Lin Ma
Andy Shevchenko
Zhengping Jiang
Gerd Bayer
D. Wythe
Eric Dumazet
Pablo Neira Ayuso
Ido Schimmel
Jakub Kicinski
Magnus Karlsson
Florian Westphal
Xiang Yang
Xu Kuohai
Andrew Kanner
Paolo Abeni
Maciej Żenczykowski
Keith Yeo
Sungwoo Kim
Ilya Dryomov
Yue Haibing
Tomas Glozar
valis
Kuniyuki Iwashima