IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit f910d3ba78a2677c23508f225eb047d89eb4b2b6 upstream.
Digging into the documentation we find that the DT_ID bitfield is used to
map the six bit DT to a two bit ID code. This value is concatenated to the
VC bitfield to create a CID value. DT_ID is the two least significant bits
of CID and VC the most significant bits.
Originally we set dt_id = vc * 4 in and then subsequently set dt_id = vc.
commit 3c4ed72a16bc ("media: camss: sm8250: Virtual channels for CSID")
silently fixed the multiplication by four which would give a better
value for the generated CID without mentioning what was being done or why.
Next up I haplessly changed the value back to "dt_id = vc * 4" since there
didn't appear to be any logic behind it.
Hans asked what the change was for and I honestly couldn't remember the
provenance of it, so I dug in.
Link: https://lore.kernel.org/linux-arm-msm/edd4bf9b-0e1b-883c-1a4d-50f4102c3924@xs4all.nl/
Add a comment so the next hapless programmer doesn't make this same
mistake.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e655d1ae9703286cef7fda8675cad62f649dc183 ]
VC_MODE = 0 implies a two bit VC address.
VC_MODE = 1 is required for VCs with a larger address than two bits.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c4ed72a16bc6733cda9c65048af74a2e8eaa0eb ]
CSID hardware on SM8250 can demux up to 4 simultaneous streams
based on virtual channel (vc) or datatype (dt).
The CSID subdevice entity now has 4 source ports that can be
enabled/disabled and thus can control which virtual channels
are enabled. Datatype demuxing not tested.
In order to keep a valid internal state of the subdevice,
implicit format propagation from the sink to the source pads
has been preserved. However, the format on each source pad
can be different and in that case it must be configured explicitly.
CSID's s_stream is called when any stream is started or stopped.
It will call configure_streams() that will rewrite IRQ settings to HW.
When multiple streams are running simultaneously there is an issue
when writing IRQ settings for one stream while another is still
running, thus avoid re-writing settings if they were not changed
in link setup, or by fully powering off the CSID hardware.
Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: e655d1ae9703 ("media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]
Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.
Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]
Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.
Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.
Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5651bab6890a0c5d126e2559b4aa353bed201e47 ]
Initialise V4L2 async notifier and parse DT for async sub-devices later,
just before registering the notifier. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428bbf4be4018aefa26e4d6531779fa8925ecaaf ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46cc031754985ee24034d55687540adb079f8630 ]
There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
managed separately by the camss device driver, the power domains are
linked and unlinked on demand by their functions vfe_pm_domain_on()
and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
domains and their parent power domain TITAN_TOP, the latter one
shall be turned on prior to turning on any of VFE power domains.
Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.
The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream.
In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
actual pattern.
- drops fixed VC of 0x0a which testing showed prohibited some test
patterns in the CSID to produce output.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
order is always the same (RGGB for any RAW8 or RAW10P format in
4608x2592 resolution).
Tested with:
RAW10P format, VC0:
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0
RAW10P format, VC1:
media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1
RAW8 format, VC0:
media-ctl --reset
media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream.
define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)
disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.
Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream.
check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream.
vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.
Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.
Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream.
There are two problems with the current vfe_disable_output() routine.
Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.
Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.
Rewrite the vfe_disable_output() routine to
- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0
remembering to hold the spinlock when we do so followed by
- Reset the VFE
Testing on sc8280xp and sdm845 shows this to be a valid fix.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7405116519ad70b8c7340359bfac8db8279e7ce4 upstream.
We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().
Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.
In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.
Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 724ff68e968b19d786870d333f9952bdd6b119cb upstream.
Initialise the try sink compose rectangle size to the sink compose
rectangle for binner and scaler sub-devices. This was missed due to the
faulty condition that lead to the compose rectangles to be initialised for
the pixel array sub-device where it is not relevant.
Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d0b89398b7ebc52103e055bf36b60b045f5258f upstream.
The hfi parser, parses the capabilities received from venus firmware and
copies them to core capabilities. Consider below api, for example,
fill_caps - In this api, caps in core structure gets updated with the
number of capabilities received in firmware data payload. If the same api
is called multiple times, there is a possibility of copying beyond the max
allocated size in core caps.
Similar possibilities in fill_raw_fmts and fill_profile_level functions.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b18e36dfd6c935da60a971310374f3dfec3c82e1 upstream.
Buffer requirement, for different buffer type, comes from video firmware.
While copying these requirements, there is an OOB possibility when the
payload from firmware is more than expected size. Fix the check to avoid
the OOB possibility.
Cc: stable@vger.kernel.org
Fixes: 09c2845e8fe4 ("[media] media: venus: hfi: add Host Firmware Interface (HFI)")
Reviewed-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0768a9dd809ef52440b5df7dce5a1c1c7e97abbd upstream.
Supported codec bitmask is populated from the payload from venus firmware.
There is a possible case when all the bits in the codec bitmask is set. In
such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized.
Now while filling the caps for encoder, it can lead to access the caps
array beyong 32 index. Hence leading to OOB write.
The fix counts the supported encoder and decoder. If the count is more than
max, then it skips accessing the caps.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8a489f820179fb12251e262b50303c29de991ac upstream.
When transmitting, infrared drivers expect an odd number of samples; iow
without a trailing space. No problems have been observed so far, so
this is just belt and braces.
Fixes: 9b6192589be7 ("media: lirc: implement scancode sending")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e538fce33589da6d7cb2de1445b84d3a8a692f7 upstream.
Read and write pointers are used to track the packet index in the memory
shared between video driver and firmware. There is a possibility of OOB
access if the read or write pointer goes beyond the queue memory size.
Add checks for the read and write pointer to avoid OOB access.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1766a4fd83befa0b34d932d532e7ebb7fab1fa7 ]
imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver. It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor. Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.
This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.
Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 441b5c63d71ec9ec5453328f7e83384ecc1dddd9 ]
Fix documentation for struct ccs_quirk, a device specific struct for
managing deviations from the standard. The flags field was drifted away
from where it should have been.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f301fedbeecfdce91cb898d6fa5e62f269801fee ]
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 099be1822d1f095433f4b08af9cc9d6308ec1953 ]
Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'
When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added.
Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/20230818164522.12806-1-coolrrsh@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73
Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e27fbeca27d8c772fc2bc807730aaee5886055 ]
'meson' directory contains two separate drivers, so it should be added
to Makefile compilation hierarchy unconditionally, because otherwise the
meson-ao-cec-g12a won't be compiled if meson-ao-cec is not selected.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31b2cb85f0ee165d78e1c43f6d69f82cc3b2145 ]
Instead of returning an error, goto the mutex unlock at
the end of the function.
Fixes smatch warning:
drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
Locked on : 326,387
Unlocked on: 465,467
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2701715301a49b53d05c7d43f3fedc3b8743bfc ]
The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.
Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fd6eb12642e0c32692924ff359c07de4b781d78 ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.
Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76a2c5df6ca8bd8ada45e953b8c72b746f42918d ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: 7a7899f6f58e ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61334819aca018c3416ee6c330a08a49c1524fc3 ]
s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeccc63f3bc4cfd49dc4893da1409402ee6b295 ]
The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.
Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.
Fixes: 45f13a57d813 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6496617b2b06d7004a5cbd53d48f19567d6b018c ]
decoder firmware may notify host some debug message,
it can help analyze the state of the firmware in case of error
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd5b50b329e850d467e7bcc07b2b6bde3752fbda ]
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0822315e46b400f611cba1193456ee6a5dc3e41d ]
This is odd to have a of_node_put() just after a for_each_child_of_node()
or a for_each_endpoint_of_node() loop. It should already be called
during the last iteration.
Remove these calls.
Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc29e3c9f682d4ad9b0764d44ecc6c19b000051 ]
The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.
Fixes: bce93b827de6 ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeaa47d182fedfe68b8fd40ef3798761c8904791 ]
The ov5640_update_pixel_rate() function handles the parallel and MIPI
CSI-2 cases separately.
When running on a parallel setup the V4L2_CID_PIXEL_RATE value is
calculated at the beginning of the function using the values configured
with the frame_interval operations, and then the function immediately
returns.
The remaining of the function handles the MIPI CSI-2 configuration and
should not use the 'current_fr' and 'def_fps' fields as those are only
relevant for parallel mode.
Drop a small section of dead code that updates vblank using
frame_interval on a MIPI CSI-2 setup.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: 8fc29e3c9f68 ("media: ov5640: fix vblank unchange issue when work at dvp mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e481d52d363218a3e6feb31694da74b38b30fad ]
In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).
The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.
Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.
To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink
Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88d4b23a629ebd34f682f770cb6c2116c851f7b8 ]
The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.
Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.
Fixes: 6971efb70ac3 ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 41ebaa5e0eebea4c3bac96b72f9f8ae0d77c0bdb upstream.
If the index provided by the user is bigger than the mask size, we might do
an out of bound read.
CC: stable@kernel.org
Fixes: 40140eda661e ("media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU")
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 735de5caf79e06cc9fb96b1b4f4974674ae3e917 ]
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41425941dfcf47cc6df8e500af6ff16a7be6539f ]
The via camera controller driver selected ov7670 driver, however now that
driver has dependencies and may no longer be selected unconditionally.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86e16b87afac20779da1228d690a95c54d7e2ad0 ]
The Kconfig option that enables compiling camera sensor drivers is
VIDEO_CAMERA_SENSOR rather than MEDIA_CAMERA_SUPPORT as it was previously.
Fix this.
Also select VIDEO_OV7670 for marvell platform drivers only if
MEDIA_SUBDRV_AUTOSELECT and VIDEO_CAMERA_SENSOR are enabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d7531be3085a8f013cf173ccc4e72e3cf493538 ]
Initialise timing struct in cio2_hw_init() to zero in order to avoid a
compiler warning. The warning was a false positive.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1796fd4904fdd6062a8e4589778ea899ea0c8d ]
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee630b29ea44d1851bb6c903f400956604834463 ]
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b97719a66970601cd3151a3e2020f4454a1c4ff6 ]
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
