IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit cd9aed606088d36a7ffff3e808db4e76b1854285 ]
nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38ce1570e2c46e7e9af983aa337edd7e43723aa2 ]
Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 107b4e063d78c300b21e2d5291b1aa94c514ea5b upstream.
Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO
platforms in s2idle sleep if 'Simple Suspend' is used.
This patch applies a new quirk 'Force No Simple Suspend' to achieve a
low power sleep without 'Simple Suspend'.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8b90d600aff181936457f032d116dbd8534db06 upstream.
When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block(). In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1. In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.
PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10"
#0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7
#1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa
#2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788
#3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb
#4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce
#5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595
#6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6
#7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926
[exception RIP: blk_stack_limits+434]
RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core]
#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core]
This happened when the check for valid data was moved out of nvme_identify_ns()
into one of the callers. Fix this by checking in both callers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186
Fixes: 0dd6fff2aad4 ("nvme: bring back auto-removal of deleted namespaces during sequential scan")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c22e0295a5eb571c27b53c7371f95699ef705ff ]
The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings. Ensure they actually are
nul-terminated before using them.
Fixes: a07b4970f464 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1147dd0503564fa0e03489a039f9e0c748a03db4 ]
Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.
Fixes: 456cba386e94 ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3820c4fdc247b6f0a4162733bdb8ddf8f2e8a1e4 upstream.
Trying to stop a queue which hasn't been allocated will result
in a warning due to calling mutex_lock() against an uninitialized mutex.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579
Call trace:
RIP: 0010:__mutex_lock+0x1173/0x14a0
nvme_rdma_stop_queue+0x1b/0xa0 [nvme_rdma]
nvme_rdma_teardown_io_queues.part.0+0xb0/0x1d0 [nvme_rdma]
nvme_rdma_delete_ctrl+0x50/0x100 [nvme_rdma]
nvme_do_delete_ctrl+0x149/0x158 [nvme_core]
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f965b281fd872b2e18bd82dd97730db9834d0750 upstream.
It may happen that the work to destroy a queue
(for example nvmet_tcp_release_queue_work()) is started while
an auth-send or auth-receive command is still completing.
nvmet_sq_destroy() will block, waiting for all the references
to the sq to be dropped, the last reference is then
dropped when nvmet_req_complete() is called.
When this happens, both nvmet_sq_destroy() and
nvmet_execute_auth_send()/_receive() will free the dhchap pointers by
calling nvmet_auth_sq_free().
Since there isn't any lock, the two threads may race against each other,
causing double frees and memory corruptions, as reported by KASAN.
Reproduced by stress blktests nvme/041 nvme/042 nvme/043
nvme nvme2: qid 0: authenticated with hash hmac(sha512) dhgroup ffdhe4096
==================================================================
BUG: KASAN: double-free in kfree+0xec/0x4b0
Call Trace:
<TASK>
kfree+0xec/0x4b0
nvmet_auth_sq_free+0xe1/0x160 [nvmet]
nvmet_execute_auth_send+0x482/0x16d0 [nvmet]
process_one_work+0x8e5/0x1510
Allocated by task 191846:
__kasan_kmalloc+0x81/0xa0
nvmet_auth_ctrl_sesskey+0xf6/0x380 [nvmet]
nvmet_auth_reply+0x119/0x990 [nvmet]
Freed by task 143270:
kfree+0xec/0x4b0
nvmet_auth_sq_free+0xe1/0x160 [nvmet]
process_one_work+0x8e5/0x1510
Fix this bug by calling nvmet_req_complete() only after freeing the
pointers, so we will prevent the race by holding the sq reference.
V2: remove redundant code
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c3f4066462a5f6cac04d3dd81c9f551fabbc6c7 upstream.
These ones claim cmic and nmic capable, so need special consideration to ignore
their duplicate identifiers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217981
Reported-by: welsh@cassens.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b32c76e2b0154b98b9322ae7546b8156cd703e6 upstream.
User can request more metadata bytes than the device will write. Ensure
kernel buffer is initialized so we're not leaking unsanitized memory on
the copy-out.
Fixes: 0b7f1f26f95a51a ("nvme: use the block layer for userspace passthrough metadata")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d920abd1e7c4884f9ecd0749d1921b7ab19ddfbd upstream.
From Alon:
"Due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel,
a malicious user can cause a UAF and a double free, which may lead to
RCE (may also lead to an LPE in case the attacker already has local
privileges)."
Hence, when a queue initialization fails after the ahash requests are
allocated, it is guaranteed that the queue removal async work will be
called, hence leave the deallocation to the queue removal.
Also, be extra careful not to continue processing the socket, so set
queue rcv_state to NVMET_TCP_RECV_ERR upon a socket error.
Cc: stable@vger.kernel.org
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Tested-by: Alon Zahavi <zahavi.alon@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dad651b2a44eb6b201738f810254279dca29d30d ]
If a device has no NUMA node information associated with it, the driver
puts the device in node first_memory_node (say node 0). Not having a
NUMA node and being associated with node 0 are completely different
things and it makes little sense to mix the two.
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e87570be9d2746e7c4e7ab1cc18fd3ca7de2768 ]
Add a helper that allocates the nvme_dev structure up to the point where
we can call nvme_init_ctrl. This pairs with the free_ctrl method and can
thus be used to cleanup the teardown path and make it more symmetric.
Note that this now calls nvme_init_ctrl a lot earlier during probing,
which also means the per-controller character device shows up earlier.
Due to the controller state no commnds can be send on it, but it might
make sense to delay the cdev registration until nvme_init_ctrl_finish.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081a7d958ce4b65f9aab6e70e65b0b2e0b92297c ]
Add a helper to create the iod mempool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae5b3a685dc59a8cf7ccfe0e850999ba9727a3c ]
The nvme_fc_fcp_op structure describing an AEN operation is initialized with a
null request structure pointer. An FC LLDD may make a call to
nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.
Add validation of the request structure pointer before dereference.
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6cc834ba62998c65c42d0c63499bdd35067151ec upstream.
Some devices are reporting controller ready mode support, but return 0
for CRTO. These devices require a much higher time to ready than that,
so they are failing to initialize after the driver starter preferring
that value over CAP.TO.
The spec requires that CAP.TO match the appropritate CRTO value, or be
set to 0xff if CRTO is larger than that. This means that CAP.TO can be
used to validate if CRTO is reliable, and provides an appropriate
fallback for setting the timeout value if not. Use whichever is larger.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863
Reported-by: Cláudio Sampaio <patola@gmail.com>
Reported-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Felix Yan <felixonmars@archlinux.org>
Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f0bbf28940cf5edad90ab57b62aa8197bf5e836 ]
iov_len is the valid data length, so pass iov_len instead of sg->length to
bvec_set_page().
Fixes: 5bfaba275ae6 ("nvmet-tcp: don't map pages which can't come from HIGHMEM")
Signed-off-by: Rakshana Sridhar <rakshanas@chelsio.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29b434d1e49252b3ad56ad3197e47fafff5356a1 upstream.
Move start_freeze into nvme_rdma_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 9f98772ba307 ("nvme-rdma: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99dc264014d5aed66ee37ddf136a38b5a2b1b529 upstream.
Move start_freeze into nvme_tcp_configure_io_queues(), and there is
at least two benefits:
1) fix unbalanced freeze and unfreeze, since re-connection work may
fail or be broken by removal
2) IO during error recovery can be failfast quickly because nvme fabrics
unquiesces queues after teardown.
One side-effect is that !mpath request may timeout during connecting
because of queue topo change, but that looks not one big deal:
1) same problem exists with current code base
2) compared with !mpath, mpath use case is dominant
Fixes: 2875b0aecabe ("nvme-tcp: fix controller reset hang during traffic")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 688b419c57c13637d95d7879e165fff3dec581eb upstream.
The Samsung PM9B1 512G SSD found in some Lenovo Yoga 7 14ARB7 laptop units
reports eui as 0001000200030004 when resuming from s2idle, causing the
device to be removed with this error in dmesg:
nvme nvme0: identifiers changed for nsid 1
To fix this, add a quirk to ignore namespace identifiers for this device.
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac522fc6c3165fd0daa2f8da7e07d5f800586daa upstream.
While duplicate IDs are still very harmful, including the potential to easily
see changing devices in /dev/disk/by-id, it turn out they are extremely
common for cheap end user NVMe devices.
Relax our check for them for so that it doesn't reject the probe on
single-ported PCIe devices, but prints a big warning instead. In doubt
we'd still like to see quirk entries to disable the potential for
changing supposed stable device identifier links, but this will at least
allow users how have two (or more) of these devices to use them without
having to manually add a new PCI ID entry with the quirk through sysfs or
by patching the kernel.
Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique")
Cc: stable@vger.kernel.org # 6.0+
Co-developed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b8f6446b6853768cb99e7c201bddce69ca60c15e ]
DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.
Fix this DMA direction, and reported in Guangwu's test.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a420efb637f52c586596283d6fd96f2a7ecb5c ]
Now that the chap context is reset upon completion, this is no longer
needed. Also remove nvme_auth_reset as no callers are left.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: a836ca33c5b0 ("nvme-core: fix memory leak in dhchap_secret_store")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a7ce375f83f4ade7c2a835444093b6870fb8257 ]
nvme_auth_[reset|free] operate on the controller while
__nvme_auth_[reset|free] operate on a chap struct (which maps to a queue
context). Rename it for clarity.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: a836ca33c5b0 ("nvme-core: fix memory leak in dhchap_secret_store")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7275ce6a5fd32ca9f5a6294ed89cf0523181af9 ]
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:
1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
alive timer
3. t = 4: host receives keep alive completion, schedules
nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive
Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.
Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 774a9636514764ddc0d072ae0d1d1c01a47e6ddd ]
When a command completes, we set a flag which will skip sending a
keep alive at the next run of nvme_keep_alive_work when TBKAS is on.
However, if the command was submitted long ago, it's possible that
the controller may have also restarted its keep alive timer (as a
result of receiving the command) long ago. The following trace
demonstrates the issue, assuming TBKAS is on and KATO = 8 for
simplicity:
1. t = 0: submit I/O commands A, B, C, D, E
2. t = 0.5: commands A, B, C, D, E reach controller, restart its keep
alive timer
3. t = 1: A completes
4. t = 2: run nvme_keep_alive_work, see recent completion, do nothing
5. t = 3: B completes
6. t = 4: run nvme_keep_alive_work, see recent completion, do nothing
7. t = 5: C completes
8. t = 6: run nvme_keep_alive_work, see recent completion, do nothing
9. t = 7: D completes
10. t = 8: run nvme_keep_alive_work, see recent completion, do nothing
11. t = 9: E completes
At this point, 8.5 seconds have passed without restarting the
controller's keep alive timer, so the controller will detect a keep
alive timeout.
Fix this by checking the IO start time when deciding to defer sending a
keep alive command. Only set comp_seen if the command started after the
most recent run of nvme_keep_alive_work. With this change, the
completions of B, C, and D will not set comp_seen and the run of
nvme_keep_alive_work at t = 4 will send a keep alive.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea4d453b9ec9ea279c39744cd0ecb47ef48ede35 ]
With TBKAS on, the completion of one command can defer sending a
keep alive for up to twice the delay between successive runs of
nvme_keep_alive_work. The current delay of KATO / 2 thus makes it
possible for one command to defer sending a keep alive for up to
KATO, which can result in the controller detecting a KATO. The following
trace demonstrates the issue, taking KATO = 8 for simplicity:
1. t = 0: run nvme_keep_alive_work, no keep-alive sent
2. t = ε: I/O completion seen, set comp_seen = true
3. t = 4: run nvme_keep_alive_work, see comp_seen == true,
skip sending keep-alive, set comp_seen = false
4. t = 8: run nvme_keep_alive_work, see comp_seen == false,
send a keep-alive command.
Here, there is a delay of 8 - ε between receiving a command completion
and sending the next command. With ε small, the controller is likely to
detect a keep alive timeout.
Fix this by running nvme_keep_alive_work with a delay of KATO / 4
whenever TBKAS is on. Going through the above trace now gives us a
worst-case delay of 4 - ε, which is in line with the recommendation of
sending a command every KATO / 2 in the NVMe specification.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0649728123cf6a5518e154b4e1735fc85ea4f55c ]
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eb94dd56a4a4e3fe286def3e2ba207804a37345 ]
If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.
nvme nvme5: Connect command failed: host path error
nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
blk_mq_quiesce_queue+0x18/0x90
nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x124/0x1b0
new_sync_write+0xff/0x190
vfs_write+0x1ef/0x280
Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1743e5f6000901a11f4e1cd741bfa9136f3ec9b1 ]
nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd375feeaf3408ed00e08c3bc918d6be15f691ad ]
On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI
IDs) accessing temp3_{min,max} fails with an invalid field error (note
that there is no problem setting the thresholds for temp1).
This contradicts the NVM Express Base Specification 2.0b, page 292:
The over temperature threshold and under temperature threshold
features shall be implemented for all implemented temperature sensors
(i.e., all Temperature Sensor fields that report a non-zero value).
Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds
for all but the composite temperature and set it for this device.
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f86a6ff6fbd891232dda3ca97fd1b9630b59809 ]
fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.
So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.
Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()
Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6622b76fe922b94189499a90ccdb714a4a8d0773 ]
Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.
Fixes: 09bd1ff4b15143b ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5a6ab0950b46ab1ef4a5c83c80234018b81b38a ]
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97416f67d55fb8b866ff1815ca7ef26b6dfa6a5e ]
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62904b3b333e7f3c0f879dc3513295eee5765c9f ]
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c098aa00118c35108f0c19bd3cdc45e11574948 ]
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
