IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 18f14afe281648e31ed35c9ad2fcb724c4838ad9 upstream.
There are reports of kernels crashing due to stack overflow while
running OpenShift (Kubernetes). The primary contributor to the stack
usage seems to be openvswitch, which is used by OVN-Kubernetes (based on
OVN (Open Virtual Network)), but NFS also contributes in some stack
traces.
There may be some opportunities to reduce stack usage in the openvswitch
code, but doing so potentially require tradeoffs vs performance, and
also requires testing across architectures.
Looking at stack usage across the kernel (using -fstack-usage), shows
that ppc64le stack frames are on average 50-100% larger than the
equivalent function built for x86-64. Which is not surprising given the
minimum stack frame size is 32 bytes on ppc64le vs 16 bytes on x86-64.
So increase the default stack size to 32KB for the modern 64-bit Book3S
platforms, ie. pseries (virtualised) and powernv (bare metal). That
leaves the older systems like G5s, and the AmigaOne (pasemi) with a 16KB
stack which should be sufficient on those machines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Link: https://msgid.link/20231215124449.317597-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e123015c0ba859cf48aa7f89c5016cc6e98e018d ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: b9ef7b4b867f ("powerpc: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8649829a1dd25199bbf557b2621cedb4bf9b3050 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 2717a33d6074 ("powerpc/opal-irqchip: Use interrupt names if present")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a260f2dd827bbc82cc60eb4f4d8c22707d80742 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd68ffce69f6cf8ddd3a3c32549d1d2275e49fc5 ]
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a74197b65e69c46fe6e53f7df2f4d6ce9ffe012 ]
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b1e38002648819c04773647d5242990e2824264 ]
crtsavres.o is linked to modules. However, as explained in commit
d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a11654de163994e32b24e3aa90ef81f4a3184d ]
Commit e4412739472b ("Documentation: raise minimum supported version of
binutils to 2.25") allows us to remove the checks for old binutils.
There is no more user for ld-ifversion. Remove it as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230119082250.151485-1-masahiroy@kernel.org
Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 ]
Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
stack unwind") added use of a new stack frame on ftrace entry to fix
stack unwind. However, the commit missed updating the offset used while
tearing down the ftrace stack when ftrace is disabled. Fix the same.
In addition, the commit missed saving the correct stack pointer in
pt_regs. Update the same.
Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5e1d824f9a283cbf90f25241b66d1f69adb3835b upstream.
During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.
Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.
Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.
Additional detail (mpe):
Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.
There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").
That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.
But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.
That path is:
interrupt_return_srr_user()
interrupt_exit_user_prepare()
interrupt_exit_user_prepare_main()
do_notify_resume()
get_signal()
task_work_run()
create_worker_cb()
create_io_worker()
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
if (tsk->thread.regs->msr & MSR_FP)
save_fpu()
# f0 is clobbered and potentially live in userspace
Note the above discussion applies equally to save_altivec().
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/
Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/
Tested-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc158d23b33df9033bcc8e7117e8591dd2f9d125 upstream.
Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.
KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.
Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feea65a338e52297b68ceb688eaf0ffc50310a83 upstream.
As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a
FORTIFY_SOURCE warning:
memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4)
WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd]
NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd]
LR opal_prd_msg_notifier+0x170/0x188 [opal_prd]
Call Trace:
opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable)
notifier_call_chain+0xc0/0x1b0
atomic_notifier_call_chain+0x2c/0x40
opal_message_notify+0xf4/0x2c0
This happens because the copy is targeting item->msg, which is only 4
bytes in size, even though the enclosing item was allocated with extra
space following the msg.
To fix the warning define struct opal_prd_msg with a union of the header
and a flex array, and have the memcpy target the flex array.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reported-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea142e590aec55ba40c5affb4d49e68c713c63dc upstream.
When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.
Fixes: 1cade527f6e9 ("powerpc/perf: BHRB control to disable BHRB logic when not used")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ]
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ]
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b25505ce043b561028e5571d84dc82aa53c2b4 ]
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7a60ab1e065257a0e467c13b519f4debcd7fcf ]
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854
Fixes: 88ec6b93c8e7 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8ee288f484a2a59c01ccd4d8a417d6ed3466e3 ]
40x TLB handlers were reworked by commit 2c74e2586bb9 ("powerpc/40x:
Rework 40x PTE access and TLB miss") to not require PTE_ATOMIC_UPDATES
anymore.
Then commit 4e1df545e2fa ("powerpc/pgtable: Drop PTE_ATOMIC_UPDATES")
removed all code related to PTE_ATOMIC_UPDATES.
Remove left over PTE_ATOMIC_UPDATES macro.
Fixes: 2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f061db5857fcd748f84a6707aad01754686ce97e.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7e0d9bb9154c6e6b2ac8746faba27b53393f25e ]
Clang 17 reports:
arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]
__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS
Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.
So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309210327.WkqSd5Bq-lkp@intel.com/
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa9ada2093ed23d52b4c1fe6e13cf78f55cc85f ]
Erhard reported that his G5 was crashing with v6.6-rc kernels:
mpic: Setting up HT PICs workarounds for U3/U4
BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe
Faulting instruction address: 0xc00000000005dc40
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G T 6.6.0-rc3-PMacGS #1
Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac
NIP: c00000000005dc40 LR: c000000000066660 CTR: c000000000007730
REGS: c0000000022bf510 TRAP: 0380 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 44004242 XER: 00000000
IRQMASK: 3
GPR00: 0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac
GPR04: 0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300
GPR08: 0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000
GPR12: 9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8
GPR16: 0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000
GPR20: 00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c
GPR24: 0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000
GPR28: c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac
NIP hash_page_do_lazy_icache+0x50/0x100
LR __hash_page_4K+0x420/0x590
Call Trace:
hash_page_mm+0x364/0x6f0
do_hash_fault+0x114/0x2b0
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at mpic_init+0x4bc/0x10c4
NIP: c000000002020a5c LR: c000000002020a04 CTR: 0000000000000000
REGS: c0000000022bf9f0 TRAP: 0300 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 24004248 XER: 00000000
DAR: c0003e008030000e DSISR: 40000000 IRQMASK: 1
...
NIP mpic_init+0x4bc/0x10c4
LR mpic_init+0x464/0x10c4
--- interrupt: 300
pmac_setup_one_mpic+0x258/0x2dc
pmac_pic_init+0x28c/0x3d8
init_IRQ+0x90/0x140
start_kernel+0x57c/0x78c
start_here_common+0x1c/0x20
A bisect pointed to the breakage beginning with commit 9fee28baa601 ("powerpc:
implement the new page table range API").
Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().
The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.
Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.
Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:
static inline int pfn_valid(unsigned long pfn)
{
...
return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}
Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.
max_mapnr is initialised in mem_init() called via:
start_kernel()
mm_core_init() # init/main.c:928
mem_init()
But that is too late for the usage in init_unavailable_range() called via:
start_kernel()
setup_arch() # init/main.c:893
paging_init()
free_area_init()
init_unavailable_range()
Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.
This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.
Thanks to Erhard and Aneesh for help debugging.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20230929132750.3cd98452@yea/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023112500.1550208-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d9cea8a552ee122e21fbd5a3c5d4eb85f648e06 ]
On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.
But then pte_user() returns 1 also for PAGE_NONE.
As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.
Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f0eee815babed70a749d2496a7678be5b45b4c14 upstream.
Eddie reported that newer kernels were crashing during boot on his 476
FSP2 system:
kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xb7ee2000
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K FSP-2
Modules linked in:
CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1
Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2
NIP: b7ee2000 LR: 8c008000 CTR: 00000000
REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2)
MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000
GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000
GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000
GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0
GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0
NIP [b7ee2000] 0xb7ee2000
LR [8c008000] 0x8c008000
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 0000000000000000 ]---
The problem is in ret_from_syscall where the check for
icache_44x_need_flush is done. When the flush is needed the code jumps
out-of-line to do the flush, and then intends to jump back to continue
the syscall return.
However the branch back to label 1b doesn't return to the correct
location, instead branching back just prior to the return to userspace,
causing bogus register values to be used by the rfi.
The breakage was introduced by commit 6f76a01173cc
("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which
inadvertently removed the "1" label and reused it elsewhere.
Fix it by adding named local labels in the correct locations. Note that
the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n
compiles.
Fixes: 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/linuxppc-dev/fdaadc46-7476-9237-e104-1d2168526e72@linux.ibm.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/20231010114750.847794-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3241f260eb830d27d09cc604690ec24533fdb433 ]
This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.
In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc879ab3ce39bc39f9b1d238b283f43a5f6f957d ]
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ]
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ]
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ]
fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses. struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.
This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses. pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:
BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
Read of size 4 at addr c000000264c26fdc by task swapper/0/1
Call Trace:
dump_stack_lvl+0x1bc/0x2b8 (unreliable)
print_report+0x3f4/0xc60
kasan_report+0x244/0x698
__asan_load4+0xe8/0x250
vga_arbiter_add_pci_device+0x60/0xe00
pci_notify+0x88/0x444
notifier_call_chain+0x104/0x320
blocking_notifier_call_chain+0xa0/0x140
device_add+0xac8/0x1d30
device_register+0x58/0x80
vio_register_device_node+0x9ac/0xce0
vio_bus_scan_register_devices+0xc4/0x13c
__machine_initcall_pseries_vio_device_init+0x94/0xf0
do_one_initcall+0x12c/0xaa8
kernel_init_freeable+0xa48/0xba8
kernel_init+0x64/0x400
ret_from_kernel_thread+0x5c/0x64
Fix this by creating separate notifier_block structs for each bus type.
Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9bbbf4979073d5536b7650decd37fcb901e6556 ]
In mpc5xxx_fwnode_get_bus_frequency(), we should add
fwnode_handle_put() when break out of the iteration
fwnode_for_each_parent_node() as it will automatically
increase and decrease the refcounter.
Fixes: de06fba62af6 ("powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322030423.1855440-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 750bd41aeaeb1f0e0128aa4f8fcd6dd759713641 ]
With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.
Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ]
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1aa000667669fa855853decbb1c69e974d8ff716 ]
By adding a forward declaration for struct lppaca we can untangle paca.h
and lppaca.h. Also move get_lppaca() into lppaca.h for consistency.
Add includes of lppaca.h to some files that need it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
Stable-dep-of: eac030b22ea1 ("powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34daf445f82bd3a4df852bb5f1dffd792ac830a0 ]
CC arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
675 | void hw_perf_event_setup(int cpu)
| ^~~~~~~~~~~~~~~~~~~
Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf:
Rework and fix the arch CPU-hotplug hooks")
So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf:
Convert book3s notifier to state machine callbacks")
While at it, also fix following error:
arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
648 | int found = 0;
| ^~~~~
Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1eb75e0dfed80d2d85b664e28a39f65b290ab55 ]
In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.
To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.
Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9dd8f292efd614f0a18452e6474fe19ae17b47 ]
With skiboot_defconfig, Clang reports:
CC arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
^
This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,
Fixes: f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86582e6189dd8f9f52c25d46c70fe5d111da6345 ]
On a powermac platform, via the call path:
start_kernel()
time_init()
ppc_md.calibrate_decr() (pmac_calibrate_decr)
via_calibrate_decr()
ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().
Use the early_* variants of these IO functions to prevent this.
The issue is pre-existing, but is surfaced by commit 721255b9826b
("genirq: Use a maple tree for interrupt descriptor management").
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b694fc96fe33a7c042e3a142d27d945c8c668b0 ]
When building the boot wrapper assembly files with clang after
commit 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation
with CONFIG_POWER10_CPU"), the following warnings appear for each file
built:
'-prefixed' is not a recognized feature for this target (ignoring feature)
'-pcrel' is not a recognized feature for this target (ignoring feature)
While it is questionable whether or not LLVM should be emitting a
warning when passed negative versions of code generation flags when
building assembly files (since it does not emit a warning for the
altivec and vsx flags), it is easy enough to work around this by just
moving the disabled flags to BOOTCFLAGS after the assignment of
BOOTAFLAGS, so that they are not added when building assembly files.
Do so to silence the warnings.
Fixes: 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU")
Link: https://github.com/ClangBuiltLinux/linux/issues/1839
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230427-remove-power10-args-from-boot-aflags-clang-v1-1-9107f7c943bc@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f3175979e62de3b929bfa54a0db4b87d36257a7 upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccb381e1af1ace292153c88eb1fffa5683d16a20 ]
As per the generic KASAN code in mm/kasan, disable KCOV with
KCOV_INSTRUMENT := n in the makefile.
This fixes a ppc64 boot hang when KCOV and KASAN are enabled.
kasan_early_init() gets called before a PACA is initialised, but the
KCOV hook expects a valid PACA.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230710044143.146840-1-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6722b25712054c0f903b839b8f5088438dd04df3 ]
altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.
Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e8328e5acbe691bbde029a52c89d70dcbc22f3 ]
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 61235b24b9cb37c13fcad5b9596d59a1afdcec30 upstream
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b59c9dc4d9d47b3c4572d826603fde507055b656 ]
Commit 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().
t1: mmap() call to mmap t2: Migration event
window paste address
do_mmap2() migration_store()
ksys_mmap_pgoff() pseries_migrate_partition()
vm_mmap_pgoff() vas_migration_handler()
Acquire mmap lock reconfig_close_windows()
do_mmap() lock mmap_mutex
mmap_region() Acquire mmap lock
call_mmap() //Wait for mmap lock
coproc_mmap() unmap vma
lock mmap_mutex update window status
//wait for mmap_mutex Release mmap lock
mmap vma unlock mmap_mutex
update window status
unlock mmap_mutex
...
Release mmap lock
Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().
Fixes: 8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5bcedc5931e7bd6928a2d8207078d4cb476b3b55 upstream.
Nageswara reported that /proc/self/status was showing "vulnerable" for
the Speculation_Store_Bypass feature on Power10, eg:
$ grep Speculation_Store_Bypass: /proc/self/status
Speculation_Store_Bypass: vulnerable
But at the same time the sysfs files, and lscpu, were showing "Not
affected".
This turns out to simply be a bug in the reporting of the
Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case.
When SEC_FTR_STF_BARRIER was added, so that firmware could communicate
the vulnerability was not present, the code in ssb_prctl_get() was not
updated to check the new flag.
So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than
adding the new check to the existing if block and expanding the comment
to cover both cases, rewrite the three cases to be separate so they can
be commented separately for clarity.
Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230517074945.53188-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ea739ea1d4d3de41acc4f4eb2d1a97eee0eb75 upstream.
binutils v2.37 drops unused section symbols, which prevents recordmcount
from capturing mcount locations in sections that have no non-weak
symbols. This results in a build failure with a message such as:
Cannot find symbol for section 12: .text.perf_callchain_kernel.
kernel/events/callchain.o: failed
The change to binutils was reverted for v2.38, so this behavior is
specific to binutils v2.37:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c09c8b42021180eee9495bd50d8b35e683d3901b
Objtool is able to cope with such sections, so this issue is specific to
recordmcount.
Fail the build and print a warning if binutils v2.37 is detected and if
we are using recordmcount.
Cc: stable@vger.kernel.org
Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230530061436.56925-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
