IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 33b7db45533af240fe44e809f9dc4d604cf82d07 ]
Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just T210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes 210 you don't get
this driver.
Fixes: 433de642a76c9 ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240112093310.329642-2-pbrobinson@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87a39071e0b639f45e05d296cc0538eef44ec0bd upstream.
Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:
Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18
Cc: stable@vger.kernel.org
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Signed-off-by: Yi Zhao <yi.zhao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240201220406.440145-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df2515a17914ecfc2a0594509deaf7fcb8d191ac upstream.
The PTDMA driver sets DMA masks in two different places for the same
device inconsistently. First call is in pt_pci_probe(), where it uses
48bit mask. The second call is in pt_dmaengine_register(), where it
uses a 64bit mask. Using 64bit dma mask causes IO_PAGE_FAULT errors
on DMA transfers between main memory and other devices.
Without the extra call it works fine. Additionally the second call
doesn't check the return value so it can silently fail.
Remove the superfluous dma_set_mask() call and only use 48bit mask.
Cc: stable@vger.kernel.org
Fixes: b0b4a6b10577 ("dmaengine: ptdma: register PTDMA controller as a DMA resource")
Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Tadeusz Struk <tstruk@gigaio.com>
Link: https://lore.kernel.org/r/20240222163053.13842-1-tstruk@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d739bccf261dd93ec1babf82f5c5d71dd4caa3e upstream.
There is chip (ls1028a) errata:
The SoC may hang on 16 byte unaligned read transactions by QDMA.
Unaligned read transactions initiated by QDMA may stall in the NOC
(Network On-Chip), causing a deadlock condition. Stalled transactions will
trigger completion timeouts in PCIe controller.
Workaround:
Enable prefetch by setting the source descriptor prefetchable bit
( SD[PF] = 1 ).
Implement this workaround.
Cc: stable@vger.kernel.org
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240201215007.439503-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e2276203ac9ff10fc76917ec9813c660f627369 ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6386f6c995b3ab91c72cfb76e4465553c555a8da ]
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'
drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'
drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~
In function ‘sh_dmae_chan_probe’,
inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
541 | "sh-dmae%d.%d", pdev->id, id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306f5df81fcc89b462fbeb9dbe26d9a8ad7c7582 ]
For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and
macOS preserves the upper bits when setting the configuration in the
lower ones. If we reset the upper bits to 0, this causes framing errors
on suspend/resume (the data stream "tears" and channels get swapped
around). Keeping the upper bits untouched, like the macOS driver does,
fixes this issue.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f62141ac730d6fe73a05750cb4482aabb681cfb9 upstream.
In order to use __cleanup for __attribute__((__cleanup__(func))) the
name must not be used for anything else. Avoid the conflict.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lkml.kernel.org/r/20230612093537.467120754%40infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3aa58cb51318e329d203857f7a191678e60bb714 ]
This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().
Switch to the managed version to fix both issues.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 968bc1d7203d384e72afe34124a1801b7af76514 ]
This dma_alloc_coherent() is undone in the remove function, but not in the
error handling path of fsl_qdma_probe().
Switch to the managed version to fix the issue in the probe and simplify
the remove function.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9847c9ba134cfe3398011e343dcf6588c1c902 ]
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73e43dcd7a8be26880ef8ff336053b29e79dbc5 ]
In case of long format of qDMA command descriptor, there are one frame
descriptor, three entries in the frame list and two data entries. So the
size of dma_pool_create for these three fields should be the same with
the total size of entries respectively, or the contents may be overwritten
by the next allocated descriptor.
Fixes: 7fdf9b05c73b ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs")
Signed-off-by: Guanhua Gao <guanhua.gao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240118162917.2951450-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5c24d94512f1b288262beda4d3dcb9629222fc7 ]
__dma_async_device_channel_register() can fail. In case of failure,
chan->local is freed (with free_percpu()), and chan->local is nullified.
When dma_async_device_unregister() is called (because of managed API or
intentionally by DMA controller driver), channels are unconditionally
unregistered, leading to this NULL pointer:
[ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
[...]
[ 1.484499] Call trace:
[ 1.486930] device_del+0x40/0x394
[ 1.490314] device_unregister+0x20/0x7c
[ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0
Look at dma_async_device_register() function error path, channel device
unregistration is done only if chan->local is not NULL.
Then add the same condition at the beginning of
__dma_async_device_channel_unregister() function, to avoid NULL pointer
issue whatever the API used to reach this function.
Fixes: d2fb0a043838 ("dmaengine: break out channel registration")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231213160452.2598073-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 54bed6bafa0f38daf9697af50e3aff5ff1354fe1 upstream.
stm32_dma_get_burst() returns a negative error for invalid input, which
gets turned into a large u32 value in stm32_dma_prep_dma_memcpy() that
in turn triggers an assertion because it does not fit into a two-bit field:
drivers/dma/stm32-dma.c: In function 'stm32_dma_prep_dma_memcpy':
include/linux/compiler_types.h:354:38: error: call to '__compiletime_assert_282' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
include/linux/compiler_types.h:335:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^~~~~~
include/linux/compiler_types.h:354:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
^~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~
drivers/dma/stm32-dma.c:1237:4: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) |
^~~~~~~~~~
As an easy workaround, assume the error can happen, so try to handle this
by failing stm32_dma_prep_dma_memcpy() before the assertion. It replicates
what is done in stm32_dma_set_xfer_param() where stm32_dma_get_burst() is
also used.
Fixes: 1c32d6c37cc2 ("dmaengine: stm32-dma: use bitfield helpers")
Fixes: a2b6103b7a8a ("dmaengine: stm32-dma: Improve memory burst management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060135.Q9eMnpCL-lkp@intel.com/
Link: https://lore.kernel.org/r/20231106134832.1470305-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03f25d53b145bc2f7ccc82fc04e4482ed734f524 upstream.
In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set. This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83c761f568733277ce1f7eb9dc9e890649c29a8c ]
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f6d317913f634920a640e9047aa2e66f5bdcb7 ]
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88928addeec577386e8c83b48b5bc24d28ba97fd ]
idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.
But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:
[ 21.562803] calling idxd_init_module+0x0/0x110 @ 1
[ 21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[ 21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[ 21.597178] calling dsa_bus_init+0x0/0x20 @ 1
To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.
Fixes: d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone")
Reported-by: Michael Prinke <michael.prinke@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0618c077a8c20e8c81e367988f70f7e32bb5a717 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/tencent_DD2D371DB5925B4B602B1E1D0A5FA88F1208@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f1ae2733e2bb4de92fefcea5fda847d92aede1 ]
The synchronize_irq(c->irq) will not return until the IRQ handler
mtk_uart_apdma_irq_handler() is completed. If the synchronize_irq()
holds a spin_lock and waits the IRQ handler to complete, but the
IRQ handler also needs the same spin_lock. The deadlock will happen.
The process is shown below:
cpu0 cpu1
mtk_uart_apdma_device_pause() | mtk_uart_apdma_irq_handler()
spin_lock_irqsave() |
| spin_lock_irqsave()
//hold the lock to wait |
synchronize_irq() |
This patch reorders the synchronize_irq(c->irq) outside the spin_lock
in order to mitigate the bug.
Fixes: 9135408c3ace ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20230806032511.45263-1-duoming@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0409dd3d151f661e7e57b901a81a02565df163c ]
In idxd_cmd_exec(), wait_event_lock_irq() explicitly calls
spin_unlock_irq()/spin_lock_irq(). If the interrupt is on before entering
wait_event_lock_irq(), it will become off status after
wait_event_lock_irq() is called. Later, wait_for_completion() may go to
sleep but irq is disabled. The scenario is warned in might_sleep().
Fix it by using spin_lock_irqsave() instead of the primitive spin_lock()
to save the irq status before entering wait_event_lock_irq() and using
spin_unlock_irqrestore() instead of the primitive spin_unlock() to restore
the irq status before entering wait_for_completion().
Before the change:
idxd_cmd_exec() {
interrupt is on
spin_lock() // interrupt is on
wait_event_lock_irq()
spin_unlock_irq() // interrupt is enabled
...
spin_lock_irq() // interrupt is disabled
spin_unlock() // interrupt is still disabled
wait_for_completion() // report "BUG: sleeping function
// called from invalid context...
// in_atomic() irqs_disabled()"
}
After applying spin_lock_irqsave():
idxd_cmd_exec() {
interrupt is on
spin_lock_irqsave() // save the on state
// interrupt is disabled
wait_event_lock_irq()
spin_unlock_irq() // interrupt is enabled
...
spin_lock_irq() // interrupt is disabled
spin_unlock_irqrestore() // interrupt is restored to on
wait_for_completion() // No Call trace
}
Fixes: f9f4082dbc56 ("dmaengine: idxd: remove interrupt disable for cmd_lock")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Signed-off-by: Lijun Pan <lijun.pan@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230916060619.3744220-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 584970421725b7805db84714b857851fdf7203a9 upstream.
CRQA flag is set by hardware when the channel request become active and
the channel is enabled. It is cleared by hardware, when the channel request
is completed.
So when it is set, it means MDMA is transferring bytes.
This information is useful in case of STM32 DMA and MDMA chaining,
especially when the user pauses DMA before stopping it, to trig one last
MDMA transfer to get the latest bytes of the SRAM buffer to the
destination buffer.
STM32 DCMI driver can then use this to know if the last MDMA transfer in
case of chaining is done.
Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004163531.2864160-3-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4b306eb83579c07b63dc65cd5bae53b7b4019d0 upstream.
Current implementation relies on curr_hwdesc index. But to keep this index
up to date, Block Transfer interrupt (BTIE) has to be enabled.
If it is not, curr_hwdesc is not updated, and then residue is not reliable.
Rely on Link Address Register instead. And disable BTIE interrupt
in stm32_mdma_setup_xfer() because it is no more needed in case of
_prep_slave_sg() to maintain curr_hwdesc up to date.
It avoids extra interrupts and also ensures a reliable residue. These
improvements are required for STM32 DCMI camera capture use case, which
need STM32 DMA and MDMA chaining for good performance.
Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004163531.2864160-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67e13e89742c3b21ce177f612bf9ef32caae6047 upstream.
In case of MDMA chaining, DMA is configured in Double-Buffer Mode (DBM)
with two periods, but if transfer has been prepared with _prep_slave_sg(),
the transfer is not marked cyclic (=!chan->desc->cyclic). However, as DBM
is activated for MDMA chaining, residue computation must take into account
cyclic constraints.
With only two periods in MDMA chaining, and no update due to Transfer
Complete interrupt masked, n_sg is always 0. If DMA current memory address
(depending on SxCR.CT and SxM0AR/SxM1AR) does not correspond, it means n_sg
should be increased.
Then, the residue of the current period is the one read from SxNDTR and
should not be overwritten with the full period length.
Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004155024.2609531-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2df467e908ce463cff1431ca1b00f650f7a514b4 upstream.
Current Target (CT) have to be reset when starting an MDMA chaining use
case, as Double Buffer mode is activated. It ensures the DMA will start
processing the first memory target (pointed with SxM0AR).
Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004155024.2609531-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81337b9a72dc58a5fa0ae8a042e8cb59f9bdec4a upstream.
chan->desc can be null, if transfer is terminated when resume is called,
leading to a NULL pointer when retrieving the hwdesc.
To avoid this case, check that chan->desc is not null and channel is
disabled (transfer previously paused or terminated).
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004163531.2864160-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6ec8c83a29fb3aec3efa6fabbf5344498f57c7f upstream.
Before setting DDS and SDS values, we need to clear its value first
otherwise, we get incorrect results when we change/update the DMA bus
width several times due to the 'OR' expression.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@kernel.org
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230706112150.198941-3-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c05ce6907b3d6e148b70f0bb5eafd61dcef1ddc1 ]
Check for the return value of platform_get_irq(): if no interrupt
is specified, it wouldn't make sense to call request_irq().
Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230724144108.2582917-1-ruanjinjie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50c5e6f41d5ad7c731c31135a30d0e4f0e4fea26 ]
Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.
Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1e213a9e31c20206f111ec664afcf31cbfe0dbb ]
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it
won't be built to cause below compiling error if PCI is unset.
--------
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined!
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined!
--------
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-2-bhe@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0a46781c89dece85386885a407244ca26e5c1c44 upstream.
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cda3ececf07d374774f6a13e5a94bc2dc04c26c upstream.
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1a5f2c887252dec161c1e12e04303ca9ba56fa9 ]
"_start" is used in several arches and proably should be reserved
for ARCH usage. Using it in a driver for a private symbol can cause
a build error when it conflicts with ARCH usage of the same symbol.
Therefore rename pl330's "_start" to "pl330_start_thread" so that there
is no conflict and no build error.
drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol
1053 | static bool _start(struct pl330_thread *thrd)
| ^~~~~~
In file included from ../include/linux/interrupt.h:21,
from ../drivers/dma/pl330.c:18:
arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]'
11 | extern char _start[];
| ^~~~~~
Fixes: b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/")
Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaswinder Singh <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230524045310.27923-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d43acb145c363626d76f49febb4240c488cd1cf ]
There are two place if the at_xdmac_interleaved_queue_desc() fails which
could lead to a NULL dereference where "first" is NULL and we call
list_add_tail(&first->desc_node, ...). In the first caller, the return
is not checked so add a check for that. In the next caller, the return
is checked but if it fails on the first iteration through the loop then
it will lead to a NULL pointer dereference.
Fixes: 4e5385784e69 ("dmaengine: at_xdmac: handle numf > 1")
Fixes: 62b5cb757f1d ("dmaengine: at_xdmac: fix memory leak in interleaved mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/21282b66-9860-410a-83df-39c17fcf2f1b@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ]
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9503be5a100c553731c0e8a82c7b4201e8a970c ]
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e96adcaa7a29827ac8ee8df290a44957a4823ec ]
Add missing setting of 'src_addr_widths', which is the same as for the
other direction.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a288fd158fbf85c06a9ac01cecabf97ac5d962e7 ]
In addition to TX channel and RX channel interrupt flags there's
another class of 'global' interrupt flags with unknown semantics. Those
weren't being handled up to now, and they are the suspected cause of
stuck IRQ states that have been sporadically occurring. Check the global
flags and clear them if raised.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 928469986171a6f763b34b039427f5667ba3fd50 ]
Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856.
Fixes: 6fa7e0e836e2 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b02e07015a5ac7bbc029da931ae17914b8ae0339 ]
Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a
DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally
allocate a new sf_pdma_desc each time it is called.
The driver previously recycled descs, by checking the in_use flag, only
allocating additional descs if the existing one was in use. This logic
was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread
support for a DMA channel"), but sf_pdma_free_desc() was not changed to
handle the new behaviour.
As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous
descriptor is leaked, over time leading to memory starvation:
unreferenced object 0xffffffe008447300 (size 192):
comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s)
hex dump (first 32 bytes):
00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................
00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p.............
backtrace:
[<00000000064a04f4>] kmemleak_alloc+0x1e/0x28
[<00000000018927a7>] kmem_cache_alloc+0x11e/0x178
[<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112
Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant
in_use flag.
Fixes: b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel")
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fdca4a995bcd4cf61bda40af154a730589dc524 ]
Previously, readq_ch() did a 64-bit readq(), but truncated the result by
storing it in the u32 "value". Change "value" to u64 to avoid the
truncation.
Note: the method is currently unused, so the bug hasn't caused any problem
so far.
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13b6299cf66165a442089fa895a7f70250703584 ]
Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.
Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.
Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcca9d045c0852584ad092123c7f6e6526a633b1 ]
The HiSilicon DMA Engine is only present on HiSilicon SoCs. Hence add a
dependency on ARCH_HISI, to prevent asking the user about this driver
when configuring a kernel without HiSilicon SoC support.
Fixes: e9f08b65250d73ab ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
