IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 9b6a51aab5f5f9f71d2fa16e8b4d530e1643dfcb upstream.
With subtle timings changes, we can now sometimes get an external abort on
non-linefetch error booting am3 devices at sysc_reset(). This is because
of a missing reset delay needed for the usb target module.
Looks like we never enabled the delay earlier for am3, although a similar
issue was seen earlier with a similar usb setup for dm814x as described in
commit ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x").
Cc: stable@vger.kernel.org
Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e5caee2ba8f1426e8098afb4ca38dc40a0ca71b ]
This node can access any part of the L3 configuration registers space,
including CLK1 and CLK2 which are 0x800000 offset. Restore this area
size to include these areas.
Fixes: 7f2659ce657e ("ARM: dts: Move dra7 l3 noc to a separate node")
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <20231113181604.546444-1-afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63ef8fc9bcee6b73ca445a19a7ac6bd544723c9f ]
Per root-node.yaml, 'model' is a required property.
Pass it to fix the following dt-schema warning:
imx28-xea.dtb: /: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d951f8f5f23a9417b7952f22b33784c73caa1ebb ]
Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.
This caused Ethernet to stop working.
Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.
Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc761f11af2e39119d3a7942e3d10615f3d900e7 ]
The LED ACT which is included from bcm2711-rpi-4-b doesn't exists
on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to
use the delete-node directive in order to remove the complete
node. Unfortunately the usage get broken in commit 1156e3a78bcc
("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
and now ACT and PWR LED using the same GPIO and this prevent
probing of led-gpios on Raspberry Pi 400:
leds-gpio: probe of leds failed with error -16
So fix the delete-node directive.
Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231118124252.14838-3-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6552218f4dc47ba3c6c5b58cc1e9eb208a2b438b ]
A regression was introduced in the Skov specific i.MX6 flavor
reve-mi1010ait-1cp1 device tree causing the external ethernet controller
to not being selected as the clock source for the i.MX6 ethernet MAC,
resulting in a none functional ethernet interface. The root cause is
that the ethernet clock selection is now part of the clocks node, which
is overwritten in the specific device tree and wasn't updated to contain
these ethernet clocks.
Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent")
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473baeab929444295b0530f8766e4becb6a08973 ]
When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).
While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link
This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.
Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ab6b437c65233f06bdd2988fd5913baeca5f159 ]
The pinmux for LED3 and LED4 are incorrectly attached to the
omap3_pmx_core when they should be connected to the omap3_pmx_wkup
pin mux. This was likely masked by the fact that the bootloader
used to do all the pinmuxing.
Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-ID: <20231005000402.50879-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f8ee81b6da5f76de8b83c8bfc4475b54e101e0 ]
Fixed regulator put under "regulators" node will not be populated,
unless simple-bus or something similar is used. Drop the "regulators"
wrapper node to fix this.
Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edc6ef026fe69154bb6b70dd6e7f278cfd7d6919 ]
On blanche, the GPIO keyboard fails to probe with:
sh-pfc e6060000.pinctrl: could not map pin config for "GP_11_02"
Fix this by correcting the name for this pin to "GP_11_2".
Fixes: 1f27fedead91eb60 ("ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/203128eca2261ffc33b83637818dd39c488f42b0.1693408326.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
-----BEGIN PGP SIGNATURE-----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=3fOd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u4lX
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few minor fixes for omaps
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
* tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
Link: https://lore.kernel.org/r/pull-1697606314-911862@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue
similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per
interconnect.
Fixes: b1da0fa21bd1 ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue.
Fixes: 349355ce3a05 ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently the Rockchip timer source clocks are set to xin24 for no obvious
reason and the actual timer clocks (SCLK_TIMER*) will get disabled during
boot process as they have no user. That will make the SoC stuck as no timer
source exists.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-12-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Like most other Rockchip ARM SoCs, the PL330 needs the
arm,pl330-periph-burst quirk in order to work as expected.
Add it.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-10-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The register address for i2c0 is missing a 0x to mark it as hex.
Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20230829203721.281455-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On mapphone devices we may get lots of noise on the micro-USB port in debug
uart mode until the phy-cpcap-usb driver probes. Let's limit the noise by
using overrun-throttle-ms.
Note that there is also a related separate issue where the charger cable
connected may cause random sysrq requests until phy-cpcap-usb probes that
still remains.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra")
attempted to fix the PWM settings but ended up causin an additional clock
reparenting error:
clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22
Only timer9 is in the PER domain and can use the sys_clkin_ck clock source.
For timer8, the there is no sys_clkin_ck available as it's in the ABE
domain, instead it should use syc_clk_div_ck. However, for power
management, we want to use the always on sys_32k_ck instead.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra")
Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2"
error on boot for omap3/4. This is caused by wrong addressing in the dts
for bandgap sensor for single sensor instances.
Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so
we can't just change the addressing in omap4-cpu-thermal.dtsi.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone")
Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support.
- AMLogic C3 SoC pin control support.
- Texas Instruments AM654 SoC pin control support.
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System)
pin control support.
- Qualcomm PMX75 and PM7550BA (Power Management) pin control
support.
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support.
- DROP the Oxnas driver as there is not enough of community
interest to keep carrying this ARM(11) port.
Enhancements:
- Bias control in the MT7986 pin control driver.
- Misc device tree binding enhancements such as the Broadcom
11351 being converted to YAML.
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use.
- Clean up some SPDX headers.
- Handle non-unique devicetree subnode names in two Renesas
drivers.
-----BEGIN PGP SIGNATURE-----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=AMCy
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230823085146.113562-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.6, please pull the following:
- Arinc adds support for the Asus RT-AC3100 router based upon the
BCM47094 SoC
- Krzysztof splits interrupt properties per cell such that they are mode
readable and adds missing spaces in front of node names/labels
- Rafal updates the BCM5301X DTS to correct PCIe, SPI over GPIO
properties. He describes the Ethernet links to internal switch ports
and then updates the BCM53573 binding and Ethernet properties by
declaring the BCM53125 external switch on port 5, add Ethernet links
and
disables the second Ethernet MAC on Luxul devices.
- Dan describes the Wi-Fi regulatory mappings for Luxul devices
- Stanislav updates the bcm28155 DTS to use node labels
- Linus adds SEAMA compatible properties to MTD partitions
- Aleksey updates the Linksys EA6500 v2 to have the full 256MiB of DRAM
available
- Stefan updates a number of BCM283x nodes to confirm to DTS schema:
pinctrl, DMA controllers and PWM cells.
-----BEGIN PGP SIGNATURE-----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=oQzu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KAWz
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.6/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based Device Tree changes for
6.6, please pull the following:
- Arinc adds support for the Asus RT-AC3100 router based upon the
BCM47094 SoC
- Krzysztof splits interrupt properties per cell such that they are mode
readable and adds missing spaces in front of node names/labels
- Rafal updates the BCM5301X DTS to correct PCIe, SPI over GPIO
properties. He describes the Ethernet links to internal switch ports
and then updates the BCM53573 binding and Ethernet properties by
declaring the BCM53125 external switch on port 5, add Ethernet links
and
disables the second Ethernet MAC on Luxul devices.
- Dan describes the Wi-Fi regulatory mappings for Luxul devices
- Stanislav updates the bcm28155 DTS to use node labels
- Linus adds SEAMA compatible properties to MTD partitions
- Aleksey updates the Linksys EA6500 v2 to have the full 256MiB of DRAM
available
- Stefan updates a number of BCM283x nodes to confirm to DTS schema:
pinctrl, DMA controllers and PWM cells.
* tag 'arm-soc/for-6.6/devicetree' of https://github.com/Broadcom/stblinux: (23 commits)
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3100
ARM: dts: broadcom: split interrupts per cells
ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
ARM: dts: BCM53573: Add Ethernet interfaces links
ARM: dts: BCM53573: Add BCM53125 switch port 5
ARM: dts: BCM53573: Describe BCM53125 switch ports in the main DTS
ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
ARM: dts: bcm28155-ap: use node labels
ARM: dts: bcm5301x: Add SEAMA compatibles
ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
dt-bindings: arm: bcm: add BCM53573 SoCs family binding
ARM: dts: BCM53573: Use updated "spi-gpio" binding properties
ARM: dts: BCM53573: Add cells sizes to PCIe node
ARM: dts: BCM53573: Drop nonexistent #usb-cells
ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add Ethernet interfaces links
ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul devices
ARM: dts: broadcom: add missing space before {
...
Link: https://lore.kernel.org/r/20230818164539.2871539-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GCC and LCC clock controller parent clocks are introduced on MDM9615.
The newly introduced RPM representation is introduced across multiple
platforms.
Voltage ADC channel names are corrected across multiple platforms.
APQ8064 gains a definition for GSBI4.
The XO clock for SDHCI is corrected, as is the USB node name, on
IPQ4019. USB node name is also corrected for SDX55.
The correct PMIC is included on SDX65 MTP.
The incorrect spi-max-frequency property is removed from controllers on
IPQ8064 and MSM8960.
OCMEM and the display subsystem are added to MSM8226.
Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a
few properties of the Sony Xperia Z2 Tablet touchscreen are corrected.
-----BEGIN PGP SIGNATURE-----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=uBzp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=38r2
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.6
GCC and LCC clock controller parent clocks are introduced on MDM9615.
The newly introduced RPM representation is introduced across multiple
platforms.
Voltage ADC channel names are corrected across multiple platforms.
APQ8064 gains a definition for GSBI4.
The XO clock for SDHCI is corrected, as is the USB node name, on
IPQ4019. USB node name is also corrected for SDX55.
The correct PMIC is included on SDX65 MTP.
The incorrect spi-max-frequency property is removed from controllers on
IPQ8064 and MSM8960.
OCMEM and the display subsystem are added to MSM8226.
Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a
few properties of the Sony Xperia Z2 Tablet touchscreen are corrected.
* tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: add support to gsbi4 uart
ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
ARM: dts: qcom: ipq4019: correct SDHCI XO clock
ARM: dts: qcom: Use labels with generic node names for ADC channels
ARM: dts: qcom-mdm9615: specify gcc clocks
ARM: dts: qcom-mdm9615: specify clocks for the lcc device
ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode
ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names
ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen
ARM: dts: qcom: apq8064: Drop redundant /smd node
ARM: dts: qcom: Add rpm-proc node for SMD platforms
ARM: dts: qcom: apq8074-dragonboard: add resin
ARM: dts: qcom-pm8941: add resin support
ARM: dts: qcom: minor whitespace cleanup around '='
ARM: dts: qcom: msm8960: drop spi-max-frequency from controller
ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller
ARM: dts: qcom: sdx55: use generic node names for USB
ARM: dts: qcom: ipq4019: use generic node names for USB
ARM: dts: qcom: msm8226: Add ocmem
ARM: dts: qcom: msm8226: Add mdss nodes
Link: https://lore.kernel.org/r/20230818024928.2485173-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
and some improvements for the edgeble-neu2 board based on this soc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQ7IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcRZCACtZP2dByueGP0I1NA607XfCTXTDsdq1hjM
We/+nIMGLXjaG+SWuVvCcvXyE6MW7cg0UIquNCowhCzyKjhAhNXGjkCskAekAx3c
XIuW6VkZ7Qmfp1OWKqiI34xx5NOUNVZl3llAe8wZFjZZd+fVjv5Ao11p5IRDNzOt
iFCO4SSU9KqeZYFF04VQFZb35p0WSaCWdY4iDPGRqvD/lMtlrL+3lx09uZ0B+yUz
pVErjD0MWO/pmfN9JCwFlWg7TISfxl5nOqT+PKsp1WshUkema21+in18Uh0An1l9
eYE+bvdwliw6rqBu2587vo3OpU/VygArEPBroaBwboHdpBKCbzHS
=VMKL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1u7+
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Basic graphics support for rv1126, some more new peripherals for it as well
and some improvements for the edgeble-neu2 board based on this soc.
* tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add rv1126 VOP_LITE support
ARM: dts: rockchip: Add rv1126 PD_VO entry
ARM: dts: rockchip: Add 12V main supply for edgeble-neu2
ARM: dts: rockchip: Add 3V3_SYS regulator for edgeble-neu2
ARM: dts: rockchip: Enable SFC for edgeble-neu2
ARM: dts: rockchip: Drop EMMC_RSTN for edgeble-neu2
ARM: dts: rockchip: Add rv1126 uart5m2_xfer pins
ARM: dts: rockchip: Add rv1126 FSPI pins
ARM: dts: rockchip: Add SFC node to rv1126
Link: https://lore.kernel.org/r/6299163.hdfAi7Kttb@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
-----BEGIN PGP SIGNATURE-----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=oGBN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkDoMACgkQYKtH/8kJ
UifXZxAAsKv/CVDDEvDvKxdnwRlsf0OzMV2RkgRwo0h0bzyMx5B57UaR7lUg/e/Y
nDK/rNvTr4L+ABJZh/1DkNE6pI406vK1BUwD2KPbbYAqcSzT3u3EztEsPmG7AvBJ
T2mkaa8d1SVHcjmRLhPt/wVOf7otpKsrOgYMPvaErAA42yvdcJrAndtUFITwW3QQ
6X89pudY1kDw56d8yTaP6U3BcDHFYxr8ZA9iy+Ll+qUk9UfNe/5HP3xh/mbC/SA/
NpEB9Dl14gwDEkhV56Y02nSIQxvf+UqJ6c/HZgb/472SYxKCQsQluDe0UWoPi09L
9NKTVQEsB76HXgNsYo+PhyT0tfzduClVil6FCzMdr+VyV131mJQ4K82KO3NW7MIh
bQsywD3VBB96dq+IDBj+xXFzwZS6QcvOICQnCwd+e9NnDmHzfTbU8KdELChbHbbg
Cpy6NjQPV3YSF1bXlXGo0Pa2dy4XCuPKe7/eOabcVr7te6Qdo5PcAaAtfTaWwz0D
7sX8WHVNzvqpf4yCkpuwTh875Svsu/5xlxv8yZJ1lIFlA0K5n8UhHjgXS8YnehCt
7SA6pC2NoE68quNk6WZNh5czsmlG0r0eNSx1jr/Pv4SJB1d3d07tKuGqHIcA80oH
N81pTRkOK66Afw2EIH1DAMxNs0xbAWRSZ4H1hdxlL5LAnF5gODk=
=fz66
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
ARM: dts: stm32: add touchscreen on stm32f746-disco board
ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
ARM: dts: stm32: re-add CAN support on stm32f746
...
Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
-----BEGIN PGP SIGNATURE-----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=OJ1M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1dGT
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
them in the platform DTS file and removes the fixed regulators that
were previously defined to abstract them before OP-TEE firmware was
ready.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The on-board eeprom on beaglebone series has a power supply from
VDD_3V3A, add that to dts to reduce dummy regulator warning.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Message-ID: <TY3P286MB2611CDC84604B11570B4A8D2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds ethernet PHY reset GPIO config for Beaglebone Black
series boards with revision C3. This fixes a random phy startup failure
bug discussed at [1]. The GPIO pin used for reset is not used on older
revisions, so it is ok to apply to all board revisions. The reset timing
was discussed and tested at [2].
[1] https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948
[2] https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Message-ID: <TY3P286MB26113797A3B2EC7E0348BBB2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
