IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Patch series "mm/gup: Unify hugetlb, speed up thp", v4.
Hugetlb has a special path for slow gup that follow_page_mask() is
actually skipped completely along with faultin_page(). It's not only
confusing, but also duplicating a lot of logics that generic gup already
has, making hugetlb slightly special.
This patchset tries to dedup the logic, by first touching up the slow gup
code to be able to handle hugetlb pages correctly with the current follow
page and faultin routines (where we're mostly there.. due to 10 years ago
we did try to optimize thp, but half way done; more below), then at the
last patch drop the special path, then the hugetlb gup will always go the
generic routine too via faultin_page().
Note that hugetlb is still special for gup, mostly due to the pgtable
walking (hugetlb_walk()) that we rely on which is currently per-arch. But
this is still one small step forward, and the diffstat might be a proof
too that this might be worthwhile.
Then for the "speed up thp" side: as a side effect, when I'm looking at
the chunk of code, I found that thp support is actually partially done.
It doesn't mean that thp won't work for gup, but as long as **pages
pointer passed over, the optimization will be skipped too. Patch 6 should
address that, so for thp we now get full speed gup.
For a quick number, "chrt -f 1 ./gup_test -m 512 -t -L -n 1024 -r 10"
gives me 13992.50us -> 378.50us. Gup_test is an extreme case, but just to
show how it affects thp gups.
This patch (of 8):
Firstly, the no_page_table() is meaningless for hugetlb which is a no-op
there, because a hugetlb page always satisfies:
- vma_is_anonymous() == false
- vma->vm_ops->fault != NULL
So we can already safely remove it in hugetlb_follow_page_mask(), alongside
with the page* variable.
Meanwhile, what we do in follow_hugetlb_page() actually makes sense for a
dump: we try to fault in the page only if the page cache is already
allocated. Let's do the same here for follow_page_mask() on hugetlb.
It should so far has zero effect on real dumps, because that still goes
into follow_hugetlb_page(). But this may start to influence a bit on
follow_page() users who mimics a "dump page" scenario, but hopefully in a
good way. This also paves way for unifying the hugetlb gup-slow.
Link: https://lkml.kernel.org/r/20230628215310.73782-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230628215310.73782-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We would like to move away from requiring architectures to restore
metadata from swap in the set_pte_at() implementation, as this is not only
error-prone but adds complexity to the arch-specific code. This requires
us to call arch_swap_restore() before calling swap_free() whenever pages
are restored from swap. We are currently doing so everywhere except in
unuse_pte(); do so there as well.
Link: https://lkml.kernel.org/r/20230523004312.1807357-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/I68276653e612d64cde271ce1b5a99ae05d6bbc4f
Signed-off-by: Peter Collingbourne <pcc@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers of show_free_areas() pass 0 and NULL, so we can directly use
show_mem() instead of show_free_areas(0, NULL), which could make
show_free_areas() a static function.
Link: https://lkml.kernel.org/r/20230630062253.189440-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memfd_create() syscall, enabled by CONFIG_MEMFD_CREATE, is useful on
its own even when not required by CONFIG_TMPFS or CONFIG_HUGETLBFS.
Split it into its own proper bool option that can be enabled by users.
Move that option into mm/ where the code itself also lies. Also add
"select" statements to CONFIG_TMPFS and CONFIG_HUGETLBFS so they
automatically enable CONFIG_MEMFD_CREATE as before.
Link: https://lkml.kernel.org/r/20230630-config-memfd-v1-1-9acc3ae38b5a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Zhangjin Wu <falcon@tinylab.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After converting the last user to folio_raw_mapping(), we can safely
remove the function.
Link: https://lkml.kernel.org/r/20230701032853.258697-3-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can replace four implicit calls to compound_head() with one by using
folio.
Link: https://lkml.kernel.org/r/20230701032853.258697-2-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Our test finds a WARN_ON in add_to_avail_list. During add_to_avail_list,
avail_lists is already in swap_avail_heads, while leads to this WARN_ON.
Here is the simplified calltrace:
------------[ cut here ]------------
Call trace:
add_to_avail_list+0xb8/0xc0
swap_range_free+0x110/0x138
swapcache_free_entries+0x100/0x1c0
free_swap_slot+0xbc/0xe0
put_swap_folio+0x1f0/0x2ec
delete_from_swap_cache+0x6c/0xd0
folio_free_swap+0xa4/0xe4
__try_to_reclaim_swap+0x9c/0x190
free_swap_and_cache+0x84/0x88
unmap_page_range+0x31c/0x934
unmap_single_vma.isra.0+0x48/0x84
unmap_vmas+0x98/0x10c
exit_mmap+0xa4/0x210
mmput+0x88/0x158
do_exit+0x284/0x970
do_group_exit+0x34/0x90
post_copy_siginfo_from_user32+0x0/0x1cc
do_notify_resume+0x15c/0x470
el0_svc+0x74/0x84
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x190/0x194
During swapoff, try_to_unuse fails to alloc memory due to memory limit and
this leads to the failure of swapoff and causes re-insertion of swap space
back into swap_list. During _enable_swap_info, this swap device is added
to avail list even this swap device if full. At the same time, one entry
in this full swap device in released and we try to add this device into
avail list and find it is already in the avail list. This causes this
WARN_ON.
To fix this. Don't add to avail list is swap is full.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230627120833.2230766-3-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 633c0666b5a5 ("Memoryless nodes: drop one memoryless node boot
warning"), the warning for a node with no available memory is removed.
Update the corresponding comment.
Link: https://lkml.kernel.org/r/20230625033340.1054103-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A folio turns into a Workingset during:
1) shrink_active_list() placing the folio from active to inactive list.
2) When a workingset transition is happening during the folio refault.
And when Workingset is set on a folio, PSI for memory can be accounted
during a) That folio is being reclaimed and b) Refault of that folio,
for usual reclaims.
This accounting of PSI for memory is not consistent for reclaim +
refault operation between usual reclaim and madvise(COLD/PAGEOUT) which
deactivate or proactively reclaim a folio:
a) A folio started at inactive and moved to active as part of accesses.
Workingset is absent on the folio thus refault of it when reclaimed
through MADV_PAGEOUT operation doesn't account for PSI.
b) When the same folio transition from inactive->active and then to
inactive through shrink_active_list(). Workingset is set on the folio
thus refault of it when reclaimed through MADV_PAGEOUT operation
accounts for PSI.
c) When the same folio is part of active list directly as a result of
folio refault and this was a workingset folio prior to eviction.
Workingset is set on the folio thus the refault of it when reclaimed
through MADV_PAGEOUT/MADV_COLD operation accounts for PSI.
d) MADV_COLD transfers the folio from active list to inactive
list. Such folios may not have the Workingset thus refault operation on
such folio doesn't account for PSI.
As said above, refault operation caused because of MADV_PAGEOUT on a
folio is accounts for memory PSI in b) and c) but not in a). Refault
caused by the reclaim of a folio on which MADV_COLD is performed
accounts memory PSI in c) but not in d). These behaviours are
inconsistent w.r.t usual reclaim + refault operation. Make this PSI
accounting always consistent by turning a folio into a workingset one
whenever it is leaving the active list. Also, accounting of PSI on a
folio whenever it leaves the active list as part of the
MADV_COLD/PAGEOUT operation helps the users whether they are operating
on proper folios[1].
[1] https://lore.kernel.org/all/20230605180013.GD221380@cmpxchg.org/
Link: https://lkml.kernel.org/r/1688393201-11135-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Sai Manobhiram Manapragada <quic_smanapra@quicinc.com>
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.
When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.
While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.
So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.
Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
issues, or are not considered suitable for -stable backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZNad/gAKCRDdBJ7gKXxA
jmw6AP9u6k8XcS8ec3/u0IUEuh7ckHx5Vvjfmo5YgWlIJDeWegD9G2fh3ZJgcjMO
jMssklfXmP+QSijCIxUva1TlzwtPDAQ=
=MqiN
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 11 of these are cc:stable and the remainder address
post-6.4 issues, or are not considered suitable for -stable
backporting"
* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/core: initialize damo_filter->list from damos_new_filter()
nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
selftests: cgroup: fix test_kmem_basic false positives
fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
MAINTAINERS: add maple tree mailing list
mm: compaction: fix endless looping over same migrate block
selftests: mm: ksm: fix incorrect evaluation of parameter
hugetlb: do not clear hugetlb dtor until allocating vmemmap
mm: memory-failure: avoid false hwpoison page mapped error info
mm: memory-failure: fix potential unexpected return value from unpoison_memory()
mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
radix tree test suite: fix incorrect allocation size for pthreads
crypto, cifs: fix error handling in extract_iter_to_sg()
zsmalloc: fix races between modifications of fullness and isolated
Enabling tmpfs "direct IO" exposes it to invalidate_inode_pages2_range(),
which when swapping can hit the VM_BUG_ON_FOLIO(!folio_contains()): the
folio has been moved from page cache to swap cache (with folio->mapping
reset to NULL), but the folio_index() embedded in folio_contains() sees
swapcache, and so returns the swapcache_index() - whereas folio->index
would be the right one to check against the index from mapping's xarray.
There are different ways to fix this, but my preference is just to order
the checks in invalidate_inode_pages2_range() the same way that they are
in __filemap_get_folio() and find_lock_entries() and filemap_fault():
check folio->mapping before folio_contains().
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <f0b31772-78d7-f198-6482-9f25aab8c13f@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Depending upon your philosophical viewpoint, either tmpfs always does
direct IO, or it cannot ever do direct IO; but whichever, if tmpfs is to
stand in for a more sophisticated filesystem, it can be helpful for tmpfs
to support O_DIRECT. So, give tmpfs a shmem_file_open() method, to set
the FMODE_CAN_ODIRECT flag: then unchanged shmem_file_read_iter() and new
shmem_file_write_iter() do the work (without any shmem_direct_IO() stub).
Perhaps later, once the direct_IO method has been eliminated from all
filesystems, generic_file_write_iter() will be such that tmpfs can again
use it, even for O_DIRECT.
xfstests auto generic which were not run on tmpfs before but now pass:
036 091 113 125 130 133 135 198 207 208 209 210 211 212 214 226 239 263
323 355 391 406 412 422 427 446 451 465 551 586 591 609 615 647 708 729
with no new failures.
LTP dio tests which were not run on tmpfs before but now pass:
dio01 through dio30, except for dio04 and dio10, which fail because
tmpfs dio read and write allow odd count: tmpfs could be made stricter,
but would that be an improvement?
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <6f2742-6f1f-cae9-7c5b-ed20fc53215@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
tmpfs only requires the FS_MGTIME flag.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-10-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable "user." extended attributes on tmpfs, limiting them by tracking
the space they occupy, and deducting that space from the limited ispace
(unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited).
tmpfs inodes and simple xattrs are both unswappable, and have to be in
lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate
for xattrs, without any need for a further mount option.
Add simple_xattr_space() to give approximate but deterministic estimate
of the space taken up by each xattr: with simple_xattrs_free() outputting
the space freed if required (but kernfs and even some tmpfs usages do not
require that, so don't waste time on strlen'ing if not needed).
Security and trusted xattrs were already supported: for consistency and
simplicity, account them from the same pool; though there's a small risk
that a tmpfs with enough space before would now be considered too small.
When extended attributes are used, "df -i" does show more IUsed and less
IFree than can be explained by the inodes: document that (manpage later).
xfstests tests/generic which were not run on tmpfs before but now pass:
020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728
with no new failures.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
GDB uses /proc/PID/mem to access memory of the target process. GDB
doesn't untag addresses manually, but relies on kernel to do the right
thing.
mem_rw() of procfs uses access_remote_vm() to get data from the target
process. It worked fine until recent changes in __access_remote_vm()
that now checks if there's VMA at target address using raw address.
Untag the address before looking up the VMA.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Fixes: eee9c708cc89 ("gup: avoid stack expansion warning for known-good case")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for assigning some inode space to extended attributes,
keep track of free_ispace instead of number of free_inodes: as if one
tmpfs inode (and accompanying dentry) occupies very approximately 1KiB.
Unsigned long is large enough for free_ispace, on 64-bit and on 32-bit:
but take care to enforce the maximum. And fix the nr_blocks maximum on
32-bit: S64_MAX would be too big for it there, so say LONG_MAX instead.
Delete the incorrect limited<->unlimited blocks/inodes comment above
shmem_reconfigure(): leave it to the error messages below to describe.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <4fe1739-d9e7-8dfd-5bce-12e7339711da@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
tmpfs wants to support limited user extended attributes, but kernfs
(or cgroupfs, the only kernfs with KERNFS_ROOT_SUPPORT_USER_XATTR)
already supports user extended attributes through simple xattrs: but
limited by a policy (128KiB per inode) too liberal to be used on tmpfs.
To allow a different limiting policy for tmpfs, without affecting the
policy for kernfs, change simple_xattr_set() to return the replaced or
removed xattr (if any), leaving the caller to update their accounting
then free the xattr (by simple_xattr_free(), renamed from the static
free_simple_xattr()).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <158c6585-2aa7-d4aa-90ff-f7c3f8fe407c@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A while ago we received the following report:
"The other outstanding issue I noticed comes from the fact that
fsconfig syscalls may occur in a different userns than that which
called fsopen. That means that resolving the uid/gid via
current_user_ns() can save a kuid that isn't mapped in the associated
namespace when the filesystem is finally mounted. This means that it
is possible for an unprivileged user to create files owned by any
group in a tmpfs mount (since we can set the SUID bit on the tmpfs
directory), or a tmpfs that is owned by any user, including the root
group/user."
The contract for {g,u}id mount options and {g,u}id values in general set
from userspace has always been that they are translated according to the
caller's idmapping. In so far, tmpfs has been doing the correct thing.
But since tmpfs is mountable in unprivileged contexts it is also
necessary to verify that the resulting {k,g}uid is representable in the
namespace of the superblock to avoid such bugs as above.
The new mount api's cross-namespace delegation abilities are already
widely used. After having talked to a bunch of userspace this is the
most faithful solution with minimal regression risks. I know of one
users - systemd - that makes use of the new mount api in this way and
they don't set unresolable {g,u}ids. So the regression risk is minimal.
Link: https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com
Fixes: f32356261d44 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API")
Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Message-Id: <20230801-vfs-fs_context-uidgid-v1-1-daf46a050bbf@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit "shmem: fix quota lock nesting in huge hole handling" was not so
good: Smatch caught shmem_recalc_inode()'s shmem_inode_unacct_blocks()
descending into quota_send_warning(): where blocking GFP_NOFS is used,
yet shmem_recalc_inode() is called holding the shmem inode's info->lock.
Yes, both __dquot_alloc_space() and __dquot_free_space() are commented
"This operation can block, but only after everything is updated" - when
calling flush_warnings() at the end - both its print_warning() and its
quota_send_warning() may block.
Rework shmem_recalc_inode() to take the shmem inode's info->lock inside,
and drop it before calling shmem_inode_unacct_blocks().
And why were the spin_locks disabling interrupts? That was just a relic
from when shmem_charge() and shmem_uncharge() were called while holding
i_pages xa_lock: stop disabling interrupts for info->lock now.
To help stop me from making the same mistake again, add a might_sleep()
into shmem_inode_acct_block() and shmem_inode_unacct_blocks(); and those
functions have grown, so let the compiler decide whether to inline them.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-fsdevel/ffd7ca34-7f2a-44ee-b05d-b54d920ce076@moroto.mountain/
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <29f48045-2cb5-7db-ecf1-72462f1bef5@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The current cursor-based directory offset mechanism doesn't work
when a tmpfs filesystem is exported via NFS. This is because NFS
clients do not open directories. Each server-side READDIR operation
has to open the directory, read it, then close it. The cursor state
for that directory, being associated strictly with the opened
struct file, is thus discarded after each NFS READDIR operation.
Directory offsets are cached not only by NFS clients, but also by
user space libraries on those clients. Essentially there is no way
to invalidate those caches when directory offsets have changed on
an NFS server after the offset-to-dentry mapping changes. Thus the
whole application stack depends on unchanging directory offsets.
The solution we've come up with is to make the directory offset for
each file in a tmpfs filesystem stable for the life of the directory
entry it represents.
shmem_readdir() and shmem_dir_llseek() now use an xarray to map each
directory offset (an loff_t integer) to the memory address of a
struct dentry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <168814734331.530310.3911190551060453102.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
De-duplicate the error handling paths. No change in behavior is
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <168814733654.530310.9958360833543413152.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
i_pages lock nests inside i_lock, but shmem_charge() and shmem_uncharge()
were being called from THP splitting or collapsing while i_pages lock was
held, and now go on to call dquot_alloc_block_nodirty() which takes
i_lock to update i_blocks.
We may well want to take i_lock out of this path later, in the non-quota
case even if it's left in the quota case (or perhaps use i_lock instead
of shmem's info->lock throughout); but don't get into that at this time.
Move the shmem_charge() and shmem_uncharge() calls out from under i_pages
lock, accounting the full batch of holes in a single call.
Still pass the pages argument to shmem_uncharge(), but it happens now to
be unused: shmem_recalc_inode() is designed to account for clean pages
freed behind shmem's back, so it gets the accounting right by itself;
then the later call to shmem_inode_unacct_blocks() led to imbalance
(that WARN_ON(inode->i_blocks) in shmem_evict_inode()).
Reported-by: syzbot+38ca19393fb3344f57e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/0000000000008e62f40600bfe080@google.com/
Reported-by: syzbot+440ff8cca06ee7a1d4db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/00000000000076a7840600bfb6e8@google.com/
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <20230725144510.253763-8-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Allow system administrator to set default global quota limits at tmpfs
mount time.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-7-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now the basic infra-structure is in place, enable quota support for tmpfs.
This offers user and group quotas to tmpfs (project quotas will be added
later). Also, as other filesystems, the tmpfs quota is not supported
within user namespaces yet, so idmapping is not translated.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-6-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add new shmem quota format, its quota_format_ops together with
dquot_operations
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-5-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make shmem_get_inode() return ERR_PTR instead of NULL on error. This will be
useful later when we introduce quota support.
There should be no functional change.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-3-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make shmem_inode_acct_block() return proper error code instead of bool.
This will be useful later when we introduce quota support.
There should be no functional change.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-2-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
damos_new_filter() is not initializing the list field of newly allocated
filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not
initializing it after calling damos_new_filter(). As a result, accessing
uninitialized memory is possible. Actually, adding multiple DAMOS filters
via DAMON sysfs interface caused NULL pointer dereferencing. Initialize
the field just after the allocation from damos_new_filter().
Link: https://lkml.kernel.org/r/20230729203733.38949-2-sj@kernel.org
Fixes: 98def236f63c ("mm/damon/core: implement damos filter")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During stress testing, the following situation was observed:
70 root 39 19 0 0 0 R 100.0 0.0 959:29.92 khugepaged
310936 root 20 0 84416 25620 512 R 99.7 1.5 642:37.22 hugealloc
Tracing shows isolate_migratepages_block() endlessly looping over the
first block in the DMA zone:
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_finished: node=0 zone=DMA order=9 ret=no_suitable_page
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_isolate_migratepages: range=(0x1 ~ 0x400) nr_scanned=513 nr_taken=0
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_finished: node=0 zone=DMA order=9 ret=no_suitable_page
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_isolate_migratepages: range=(0x1 ~ 0x400) nr_scanned=513 nr_taken=0
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_finished: node=0 zone=DMA order=9 ret=no_suitable_page
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_isolate_migratepages: range=(0x1 ~ 0x400) nr_scanned=513 nr_taken=0
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_finished: node=0 zone=DMA order=9 ret=no_suitable_page
hugealloc-310936 [001] ..... 237297.415718: mm_compaction_isolate_migratepages: range=(0x1 ~ 0x400) nr_scanned=513 nr_taken=0
The problem is that the functions tries to test and set the skip bit once
on the block, to avoid skipping on its own skip-set, using
pageblock_aligned() on the pfn as a test. But because this is the DMA
zone which starts at pfn 1, this is never true for the first block, and
the skip bit isn't set or tested at all. As a result,
fast_find_migrateblock() returns the same pageblock over and over.
If the pfn isn't pageblock-aligned, also check if it's the start of the
zone to ensure test-and-set-exactly-once on unaligned ranges.
Thanks to Vlastimil Babka for the help in debugging this.
Link: https://lkml.kernel.org/r/20230731172450.1632195-1-hannes@cmpxchg.org
Fixes: 90ed667c03fe ("Revert "Revert "mm/compaction: fix set skip in fast_find_migrateblock""")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio->_mapcount is overloaded in SLAB, so folio_mapped() has to be done
after folio_test_slab() is checked. Otherwise slab folio might be treated
as a mapped folio leading to false 'Someone maps the hwpoison page' error
info.
Link: https://lkml.kernel.org/r/20230727115643.639741-4-linmiaohe@huawei.com
Fixes: 230ac719c500 ("mm/hwpoison: don't try to unpoison containment-failed pages")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If unpoison_memory() fails to clear page hwpoisoned flag, return value ret
is expected to be -EBUSY. But when get_hwpoison_page() returns 1 and
fails to clear page hwpoisoned flag due to races, return value will be
unexpected 1 leading to users being confused. And there's a code smell
that the variable "ret" is used not only to save the return value of
unpoison_memory(), but also the return value from get_hwpoison_page().
Make a further cleanup by using another auto-variable solely to save the
return value of get_hwpoison_page() as suggested by Naoya.
Link: https://lkml.kernel.org/r/20230727115643.639741-3-linmiaohe@huawei.com
Fixes: bf181c582588 ("mm/hwpoison: fix unpoison_memory()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "A few fixup patches for mm", v2.
This series contains a few fixup patches to fix potential unexpected
return value, fix wrong swap entry type for hwpoisoned swapcache page and
so on. More details can be found in the respective changelogs.
This patch (of 3):
Hwpoisoned dirty swap cache page is kept in the swap cache and there's
simple interception code in do_swap_page() to catch it. But when trying
to swapoff, unuse_pte() will wrongly install a general sense of "future
accesses are invalid" swap entry for hwpoisoned swap cache page due to
unaware of such type of page. The user will receive SIGBUS signal without
expected BUS_MCEERR_AR payload. BTW, typo 'hwposioned' is fixed.
Link: https://lkml.kernel.org/r/20230727115643.639741-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20230727115643.639741-2-linmiaohe@huawei.com
Fixes: 6b970599e807 ("mm: hwpoison: support recovery from ksm_might_need_to_copy()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We encountered many kernel exceptions of VM_BUG_ON(zspage->isolated ==
0) in dec_zspage_isolation() and BUG_ON(!pages[1]) in zs_unmap_object()
lately. This issue only occurs when migration and reclamation occur at
the same time.
With our memory stress test, we can reproduce this issue several times
a day. We have no idea why no one else encountered this issue. BTW,
we switched to the new kernel version with this defect a few months
ago.
Since fullness and isolated share the same unsigned int, modifications of
them should be protected by the same lock.
[andrew.yang@mediatek.com: move comment]
Link: https://lkml.kernel.org/r/20230727062910.6337-1-andrew.yang@mediatek.com
Link: https://lkml.kernel.org/r/20230721063705.11455-1-andrew.yang@mediatek.com
Fixes: c4549b871102 ("zsmalloc: remove zspage isolation for migration")
Signed-off-by: Andrew Yang <andrew.yang@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The x86 Control-flow Enforcement Technology (CET) feature includes a
new type of memory called shadow stack. This shadow stack memory has
some unusual properties, which requires some core mm changes to
function properly.
In userspace, shadow stack memory is writable only in very specific,
controlled ways. However, since userspace can, even in the limited
ways, modify shadow stack contents, the kernel treats it as writable
memory. As a result, without additional work there would remain many
ways for userspace to trigger the kernel to write arbitrary data to
shadow stacks via get_user_pages(, FOLL_WRITE) based operations. To
help userspace protect their shadow stacks, make this a little less
exposed by blocking writable get_user_pages() operations for shadow
stack VMAs.
Still allow FOLL_FORCE to write through shadow stack protections, as it
does for read-only protections. This is required for debugging use
cases.
[ dhansen: fix rebase goof, readd writable_file_mapping_allowed() hunk ]
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-23-rick.p.edgecombe%40intel.com
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.
To avoid breaking existing users, provide helper functions for the few
required fields.
As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The kernel parameter 'cma_pernuma=' only supports reserving the same
size of CMA area for each node. We need to reserve different sizes of
CMA area for specified nodes if these devices belong to different nodes.
Adding another kernel parameter 'numa_cma=' to reserve CMA area for
the specified node. If we want to use one of these parameters, we need to
enable DMA_NUMA_CMA.
At the same time, print the node id in cma_declare_contiguous_nid() if
CONFIG_NUMA is enabled.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
or aren't considered serious enough to justify backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZMRGzwAKCRDdBJ7gKXxA
jtWoAQDqD5yton3O/tPcCC2X7QbV5bsgghIqvQFo5yWvuiJdNwEAkKwLnXISAadg
RmVCgsfQ+4CCsJgp7RpPlMS43m2AQgI=
=Rib2
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"11 hotfixes. Five are cc:stable and the remainder address post-6.4
issues or aren't considered serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: fix hardware poison check in unpoison_memory()
proc/vmcore: fix signedness bug in read_from_oldmem()
mailmap: update remaining active codeaurora.org email addresses
mm: lock VMA in dup_anon_vma() before setting ->anon_vma
mm: fix memory ordering for mm_lock_seq and vm_lock_seq
scripts/spelling.txt: remove 'thead' as a typo
mm/pagewalk: fix EFI_PGT_DUMP of espfix area
shmem: minor fixes to splice-read implementation
tmpfs: fix Documentation of noswap and huge mount options
Revert "um: Use swap() to make code cleaner"
mm/damon/core-test: initialise context before test in damon_test_set_attrs()
This reverts commit 9e46e4dcd9d6cd88342b028dbfa5f4fb7483d39c.
kbuild reports a warning in memblock_remove_region() because of a false
positive caused by partial reset of the memblock state.
Doing the full reset will remove the false positives, but will allow
late use of memblock_free() to go unnoticed, so it is better to revert
the offending commit.
WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2
RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Call Trace:
memblock_discard (kbuild/src/x86_64/mm/memblock.c:383)
page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405)
kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546)
kernel_init (kbuild/src/x86_64/init/main.c:1439)
ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145)
ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298)
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com
Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mbind() calls down into vma_replace_policy() without taking the per-VMA
locks, replaces the VMA's vma->vm_policy pointer, and frees the old
policy. That's bad; a concurrent page fault might still be using the
old policy (in vma_alloc_folio()), resulting in use-after-free.
Normally this will manifest as a use-after-free read first, but it can
result in memory corruption, including because vma_alloc_folio() can
call mpol_cond_put() on the freed policy, which conditionally changes
the policy's refcount member.
This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA
systems as long as the kernel was built with CONFIG_NUMA.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it")
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was pointed out[1] that using folio_test_hwpoison() is wrong as we need
to check the indiviual page that has poison. folio_test_hwpoison() only
checks the head page so go back to using PageHWPoison().
User-visible effects include existing hwpoison-inject tests possibly
failing as unpoisoning a single subpage could lead to unpoisoning an
entire folio. Memory unpoisoning could also not work as expected as
the function will break early due to only checking the head page and
not the actually poisoned subpage.
[1]: https://lore.kernel.org/lkml/ZLIbZygG7LqSI9xe@casper.infradead.org/
Link: https://lkml.kernel.org/r/20230717181812.167757-1-sidhartha.kumar@oracle.com
Fixes: a6fddef49eef ("mm/memory-failure: convert unpoison_memory() to folios")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When VMAs are merged, dup_anon_vma() is called with `dst` pointing to the
VMA that is being expanded to cover the area previously occupied by
another VMA. This currently happens while `dst` is not write-locked.
This means that, in the `src->anon_vma && !dst->anon_vma` case, as soon as
the assignment `dst->anon_vma = src->anon_vma` has happened, concurrent
page faults can happen on `dst` under the per-VMA lock. This is already
icky in itself, since such page faults can now install pages into `dst`
that are attached to an `anon_vma` that is not yet tied back to the
`anon_vma` with an `anon_vma_chain`. But if `anon_vma_clone()` fails due
to an out-of-memory error, things get much worse: `anon_vma_clone()` then
reverts `dst->anon_vma` back to NULL, and `dst` remains completely
unconnected to the `anon_vma`, even though we can have pages in the area
covered by `dst` that point to the `anon_vma`.
This means the `anon_vma` of such pages can be freed while the pages are
still mapped into userspace, which leads to UAF when a helper like
folio_lock_anon_vma_read() tries to look up the anon_vma of such a page.
This theoretically is a security bug, but I believe it is really hard to
actually trigger as an unprivileged user because it requires that you can
make an order-0 GFP_KERNEL allocation fail, and the page allocator tries
pretty hard to prevent that.
I think doing the vma_start_write() call inside dup_anon_vma() is the most
straightforward fix for now.
For a kernel-assisted reproducer, see the notes section of the patch mail.
Link: https://lkml.kernel.org/r/20230721034643.616851-1-jannh@google.com
Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Booting x86_64 with CONFIG_EFI_PGT_DUMP=y shows messages of the form
"mm/pgtable-generic.c:53: bad pmd (____ptrval____)(8000000100077061)".
EFI_PGT_DUMP dumps all of efi_mm, including the espfix area, which is set
up with pmd entries which fit the pmd_bad() check: so 0d940a9b270b warns
and clears those entries, which would ruin running Win16 binaries.
The failing pte_offset_map() stopped such a kernel from even booting,
until a few commits later be872f83bf57 changed the pagewalk to tolerate
that: but it needs to be even more careful, to not spoil those entries.
I might have preferred to change init_espfix_ap() not to use "bad" pmd
entries; or to leave them out of the efi_mm dump. But there is great
value in staying away from there, and a pagewalk check of address against
TASK_SIZE may protect from other such aberrations too.
Link: https://lkml.kernel.org/r/22bca736-4cab-9ee5-6a52-73a3b2bbe865@google.com
Closes: https://lore.kernel.org/linux-mm/CABXGCsN3JqXckWO=V7p=FhPU1tK03RE1w9UE6xL5Y86SMk209w@mail.gmail.com/
Fixes: 0d940a9b270b ("mm/pgtable: allow pte_offset_map[_lock]() to fail")
Fixes: be872f83bf57 ("mm/pagewalk: walk_pte_range() allow for pte_offset_map()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HWPoison: my reading of folio_test_hwpoison() is that it only tests the
head page of a large folio, whereas splice_folio_into_pipe() will splice
as much of the folio as it can: so for safety we should also check the
has_hwpoisoned flag, set if any of the folio's pages are hwpoisoned.
(Perhaps that ugliness can be improved at the mm end later.)
The call to splice_zeropage_into_pipe() risked overrunning past EOF: ask
it for "part" not "len".
Link: https://lkml.kernel.org/r/32c72c9c-72a8-115f-407d-f0148f368@google.com
Fixes: bd194b187115 ("shmem: Implement splice-read")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
