37794 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sebastian Andrzej Siewior
|
d53f23fe16 |
selftests: hsr: Reorder the testsuite.
Move the code and group into functions so it will be easier to extend the test to HSRv1 so that both versions are covered. Move the ping/test part into do_complete_ping_test() and the interface setup into setup_hsr_interfaces(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Sebastian Andrzej Siewior
|
5c3ce539a1 |
selftests: hsr: Use `let' properly.
The timeout in the while loop is never subtracted due wrong usage of `let' leading to an endless loop if the former condition never gets true. Put the statement for let in quotes so it is parsed as a single statement. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Thomas Richter
|
e47749f179 |
perf jevent: fix core dump on software events on s390
Running commands such as
# ./perf stat -e cs -- true
Segmentation fault (core dumped)
# ./perf stat -e cpu-clock-- true
Segmentation fault (core dumped)
#
dump core. This should not happen as these events are defined
even when no hardware PMU is available.
Debugging this reveals this call chain:
perf_pmus__find_by_type(type=1)
+--> pmu_read_sysfs(core_only=false)
+--> perf_pmu__find2(dirfd=3, name=0x152a113 "software")
+--> perf_pmu__lookup(pmus=0x14f0568 <other_pmus>, dirfd=3,
lookup_name=0x152a113 "software")
+--> perf_pmu__find_events_table (pmu=0x1532130)
Now the pmu is "software" and it tries to find a proper table
generated by the pmu-event generation process for s390:
# cd pmu-events/
# ./jevents.py s390 all /root/linux/tools/perf/pmu-events/arch |\
grep -E '^const struct pmu_table_entry'
const struct pmu_table_entry pmu_events__cf_z10[] = {
const struct pmu_table_entry pmu_events__cf_z13[] = {
const struct pmu_table_entry pmu_metrics__cf_z13[] = {
const struct pmu_table_entry pmu_events__cf_z14[] = {
const struct pmu_table_entry pmu_metrics__cf_z14[] = {
const struct pmu_table_entry pmu_events__cf_z15[] = {
const struct pmu_table_entry pmu_metrics__cf_z15[] = {
const struct pmu_table_entry pmu_events__cf_z16[] = {
const struct pmu_table_entry pmu_metrics__cf_z16[] = {
const struct pmu_table_entry pmu_events__cf_z196[] = {
const struct pmu_table_entry pmu_events__cf_zec12[] = {
const struct pmu_table_entry pmu_metrics__cf_zec12[] = {
const struct pmu_table_entry pmu_events__test_soc_cpu[] = {
const struct pmu_table_entry pmu_metrics__test_soc_cpu[] = {
const struct pmu_table_entry pmu_events__test_soc_sys[] = {
#
However event "software" is not listed, as can be seen in the
generated const struct pmu_events_map pmu_events_map[].
So in function perf_pmu__find_events_table(), the variable
table is initialized to NULL, but never set to a proper
value. The function scans all generated &pmu_events_map[]
tables, but no table matches, because the tables are
s390 CPU Measurement unit specific:
i = 0;
for (;;) {
const struct pmu_events_map *map = &pmu_events_map[i++];
if (!map->arch)
break;
--> the maps are there because the build generated them
if (!strcmp_cpuid_str(map->cpuid, cpuid)) {
table = &map->event_table;
break;
}
--> Since no matching CPU string the table var remains 0x0
}
free(cpuid);
if (!pmu)
return table;
--> The pmu is "software" so it exists and no return
--> and here perf dies because table is 0x0
for (i = 0; i < table->num_pmus; i++) {
...
}
return NULL;
Fix this and do not access the table variable. Instead return 0x0
which is the same return code when the for-loop was not successful.
Output after:
# ./perf stat -e cs -- true
Performance counter stats for 'true':
0 cs
0.000853105 seconds time elapsed
0.000061000 seconds user
0.000827000 seconds sys
# ./perf stat -e cpu-clock -- true
Performance counter stats for 'true':
0.25 msec cpu-clock # 0.341 CPUs utilized
0.000728383 seconds time elapsed
0.000055000 seconds user
0.000706000 seconds sys
# ./perf stat -e cycles -- true
Performance counter stats for 'true':
<not supported> cycles
0.000767298 seconds time elapsed
0.000055000 seconds user
0.000739000 seconds sys
#
Fixes: 7c52f10c0d4d8 ("perf pmu: Cache JSON events table")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: dengler@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20230913125157.2790375-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
Ian Rogers
|
eaaebb01a7 |
perf pmu: Ensure all alias variables are initialized
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Ian Rogers
|
d1bac78e26 |
perf jevents metric: Fix type of strcmp_cpuid_str
The parser wraps all strings as Events, so the input is an
Event. Using a string would be bad as functions like Simplify are
called on the arguments, which wouldn't be present on a string.
Fixes: 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230914022204.1488383-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Ian Rogers
|
33b725ce7b |
perf trace: Avoid compile error wrt redefining bool
Make part of an existing TODO conditional to avoid the following build
error:
```
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:14: error: cannot combine with previous 'char' declaration specifier
26 | typedef char bool;
| ^
include/stdbool.h:20:14: note: expanded from macro 'bool'
20 | #define bool _Bool
| ^
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:1: error: typedef requires a name [-Werror,-Wmissing-declarations]
26 | typedef char bool;
| ^~~~~~~~~~~~~~~~~
2 errors generated.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230913184957.230076-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
|
Ian Rogers
|
4a73fca226 |
perf bpf-prologue: Remove unused file
Commit 3d6dfae88917 ("perf parse-events: Remove BPF event support")
removed building bpf-prologue.c but failed to remove the actual file.
Fixes: 3d6dfae88917 ("perf parse-events: Remove BPF event support")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230913184534.227961-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
||
Linus Torvalds
|
e54ca3c81f |
Fix a cold functions related false-positive objtool warning
that triggers on Clang. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmUHOFwRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hQdRAAsekH6786PH2hiL7DL1KhCZMdC1V71ORr 3YFj1LcG+mXB6nQLt961KgA4l4efGMMxBxhT47wqOm0tJXUOVSzXxi3aQ0eoIPH0 m5MnSWEyfZRjcvNjS8IZ2N8CJr1AvnSZPJ3iaJD2knNqHOCMORXbrhXnc9ulL3PR r1eBaaylLtlhHUdvekUeW8qZBAFx3ZzWz3lf0IY8seBbBPTXVp6dS4PPMzZ5vwTB e9yyOiLaF1P5mNZnOBNfEVKTQTmaFECDRp9PhGcTxY0GY4+9apyD5h/aDJwRJyFN ciB+zvmxw3mjlhCCG1CllImjz/gvzdwqzxeYlHPyZvEbnuJqCkdBLSgRGwi9vtyw APsHYYAHr6CNR/15/PvmX+GGR6No0OkR9BoZL5ygJE5+sapKvyeItymqovRRKGZ/ kEQK2fj6EiDiy2EejMZ9EFUtWfhkV5OkT0Jd0nd/ZxZi3UbBEfqq6JgSIe/+KzC3 Iniovn77mpQHP1cM/OGbPByOMUygjNBwigCwo12imxrktud+/HQJ74gX7cBsYKEH fKbAbHoLpC7/hqGc/3nzZF7b1pBMf4Lehm6iePsXai6Fv9hO7/T5RH54xJGp4HTO EexuFJt/d7l4ymtGtO8i/V65iiVkXsddnBivYfOqisxwB0s5BcMgsh4XrWMGd8Q4 KP9fcsOtUKM= =DIBp -----END PGP SIGNATURE----- Merge tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions |
||
David S. Miller
|
1612cc4b14 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 450 insertions(+), 36 deletions(-). The main changes are: 1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao. 2) Check whether override is allowed in kprobe mult, from Jiri Olsa. 3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick. 4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann, Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor, Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
57d88e8a59 |
linux-kselftest-fixes-6.6-rc2
This kselftest fixes update for Linux 6.6-rc2 consists of important
fixes to user_events test and ftrace test.
user_events test has been enabled for default run in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- adds checks for dependencies and skips the test. user_events test
requires root access, and tracefs and user_events enabled. It leaves
tracefs mounted and a fix is in progress for that missing piece.
- creates user_events test-specific Kconfig fragments.
ftrace test fixes:
- unmounts tracefs for recovering environment. Fix identified during the
above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmUEgFwACgkQCwJExA0N
QxwhCQ//el9LBeL2siNsMY7tH9LyPfO1FTq3ZqECqGGf2CN66uT53oPJDfgEhG1k
n+x9+lAPe7Pezy6/pzocfPnbFcFYpgoBclNCcXZW3Yhkt6XUgWDBEzWvYIvhaHjg
AlYv/ez/IcOpvlph1LlfcNtmRJX/ss+K1sZmXD2ivT5ocoVnwTSELtzVxIdsTQGg
snuPgz23ODXoK+TCQvp2tghEpgoQclTYkKH3C534GP1SV6Mv2btoz6p654x0DIR3
nh8wUBAXhJR9g6eumgziWWWhLBZSz3IQWVJZ7pzOjSDkIiSd0HX18uVpzGx2Mq0E
yScYcCfLQYHoUvskhKfntZjDlRtb07DAKxqv8Tjbu3rvssYSNVMlnb5qlcqfp7go
CZyiPZ9es8ELbPy2iVn3sjNGhGYcBxJ0ZIF7EEYutRV9kcmG4j+2oaRUWdkz3a+P
XlGnDsdTsHic2qWMPX80V6g1eecrDoWeID12EC5Vtr80Dp4elGi+PS5jviJ6wgP8
Y5SksEyamCnSE71M1uQoSCbhOA5/xVpK65N9EvLrMCDNWQ/ZKVle4b0SKM7AQpZM
dN4UTNEZqfSYW6xLpWOUmf1EtIewiJsdHbizHooxIxjnNAVvi0ZElDG//omxj1Vz
bT4OWvPGDJIqxwYHWowcZC9tq+rjDcH5nNTn6x8dPHCRoQSvNX4=
=HdKU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
|
||
Nick Desaulniers
|
c0bb9fb0e5 |
bpf: Fix BTF_ID symbol generation collision in tools/
Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor <nathan@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/ Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David S. Miller
|
615efed8b6 |
netfilter pull request 23-09-13
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmUCKboACgkQ1V2XiooU IOQ1CxAAqKwyeROJ7+qLvIBbwRFIQr70pPCjfY/GskP9aqljhth+e5TsKurWA12X wwbVhQ9xblvxarekR4B8lwGhvenYHk3l6R/3wuTMYPHFTXkE+mluGgljffaMwV+D YywK5hOkLenBZmxdjUfdJ87DJwAadcbLOABmEiSQ3hDxj3/xTBf7gToqlSwHtjCC JDC7vhxjosQHQSLhjqetfrUauz0OZAqldZ2is/FELYg56oCGKddGAZxnC4fQBnXx DzvRroP8f8bkqGjKwkt945bKiQ4Cz1frQE+YP1+pRk0rOkv70hhzH0JXIELQ5q9L RYLFfgkemp2HfBJ+y2PK8lBDailre4MdGdsAI5eWjBXgrl3jRBybioafhhUbJVIq Q3zIzXVgLQqXwSONBF2sfVssVZzhfjAzZQzzgw3wayhWj1WgwqsCb0EChvA4FJZ7 HW4xyROeOV7GHoUAWCPcoeBiNJYKmGNWjkWwlT4q5LtYMyWWP9oYx2kOn9/JQ9QI Tth8QobntRr8Gw/f0awGULM2pcecCLyYhIoJtWctegFSN2ejrKiV9XItbxZ3G1in 3pYSVgpyve9ZAvHmTSyvh+mjZ71X2ZebLyMADrWbsHrCXgIUSUkoksQd97XsffeZ noRVlLj0MlfRlUoorDQG3A+QxdQb+ZaHkBKTOEzouKOYEj6vylY= =TgRd -----END PGP SIGNATURE----- Merge tag 'nf-23-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf netfilter pull request 23-09-13 ==================== The following patchset contains Netfilter fixes for net: 1) Do not permit to remove rules from chain binding, otherwise double rule release is possible, triggering UaF. This rule deletion support does not make sense and userspace does not use this. Problem exists since the introduction of chain binding support. 2) rbtree GC worker only collects the elements that have expired. This operation is not destructive, therefore, turn write into read spinlock to avoid datapath contention due to GC worker run. This was not fixed in the recent GC fix batch in the 6.5 cycle. 3) pipapo set backend performs sync GC, therefore, catchall elements must use sync GC queue variant. This bug was introduced in the 6.5 cycle with the recent GC fixes. 4) Stop GC run if memory allocation fails in pipapo set backend, otherwise access to NULL pointer to GC transaction object might occur. This bug was introduced in the 6.5 cycle with the recent GC fixes. 5) rhash GC run uses an iterator that might hit EAGAIN to rewind, triggering double-collection of the same element. This bug was introduced in the 6.5 cycle with the recent GC fixes. 6) Do not permit to remove elements in anonymous sets, this type of sets are populated once and then bound to rules. This fix is similar to the chain binding patch coming first in this batch. API permits since the very beginning but it has no use case from userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Sabrina Dubroca
|
c326ca9844 |
selftests: tls: swap the TX and RX sockets in some tests
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through
the self->cfd socket (only configured with TLS_RX) and to receive through
the self->fd socket (only configured with TLS_TX), so they're not using
kTLS at all. Swap the sockets.
Fixes: 7f657d5bf507 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Linus Torvalds
|
9fdfb15a3d |
Networking fixes for 6.6-rc2.
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vSvh
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
|
||
Mike Rapoport (IBM)
|
55122e0130 |
memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from tests/common.h:9,
from tests/basic_api.h:5,
from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
| ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
||
|
Mike Rapoport (IBM)
|
5e1bffbdb6 |
memblock tests: fix warning: "__ALIGN_KERNEL" redefined
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined
14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
|
In file included from ../../include/linux/mm.h:6,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/uapi/linux/const.h:31: note: this is the location of the previous definition
31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
|
Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from
tools/include/linux/mm.h to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
||
Rong Tao
|
4b2d631236 |
memblock tests: Fix compilation errors.
This patch fix the follow errors.
commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") pass nid
parameter to reserve_bootmem_region(),
$ make -C tools/testing/memblock/
...
memblock.c: In function ‘memmap_init_reserved_pages’:
memblock.c:2111:25: error: too many arguments to function ‘reserve_bootmem_region’
2111 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
../../include/linux/mm.h:32:6: note: declared here
32 | void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
| ^~~~~~~~~~~~~~~~~~~~~~
memblock.c:2122:17: error: too many arguments to function ‘reserve_bootmem_region’
2122 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
commit dcdfdd40fa82 ("mm: Add support for unaccepted memory") call
accept_memory() in memblock.c
$ make -C tools/testing/memblock/
...
cc -fsanitize=address -fsanitize=undefined main.o memblock.o \
lib/slab.o mmzone.o slab.o tests/alloc_nid_api.o \
tests/alloc_helpers_api.o tests/alloc_api.o tests/basic_api.o \
tests/common.o tests/alloc_exact_nid_api.o -o main
/usr/bin/ld: memblock.o: in function `memblock_alloc_range_nid':
memblock.c:(.text+0x7ae4): undefined reference to `accept_memory'
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory")
Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Link: https://lore.kernel.org/r/tencent_6F19BC082167F15DF2A8D8BEFE8EF220F60A@qq.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
||
Phil Sutter
|
e8dbde59ca |
selftests: netfilter: Test nf_tables audit logging
Compare NETFILTER_CFG type audit logs emitted from kernel upon ruleset modifications against expected output. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
Jiri Olsa
|
8a19edd4fa |
selftests/bpf: Fix kprobe_multi_test/attach_override test
We need to deny the attach_override test for arm64, denying the
whole kprobe_multi_test suite. Also making attach_override static.
Fixes: 7182e56411b9 ("selftests/bpf: Add kprobe_multi override test")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230913114711.499829-1-jolsa@kernel.org
|
||
|
Linus Torvalds
|
99214f6778 |
Tracing fixes for 6.6:
- Add missing LOCKDOWN checks for eventfs callers When LOCKDOWN is active for tracing, it causes inconsistent state when some functions succeed and others fail. - Use dput() to free the top level eventfs descriptor There was a race between accesses and freeing it. - Fix a long standing bug that eventfs exposed due to changing timings by dynamically creating files. That is, If a event file is opened for an instance, there's nothing preventing the instance from being removed which will make accessing the files cause use-after-free bugs. - Fix a ring buffer race that happens when iterating over the ring buffer while writers are active. Check to make sure not to read the event meta data if it's beyond the end of the ring buffer sub buffer. - Fix the print trigger that disappeared because the test to create it was looking for the event dir field being filled, but now it has the "ef" field filled for the eventfs structure. - Remove the unused "dir" field from the event structure. - Fix the order of the trace_dynamic_info as it had it backwards for the offset and len fields for which one was for which endianess. - Fix NULL pointer dereference with eventfs_remove_rec() If an allocation fails in one of the eventfs_add_*() functions, the caller of it in event_subsystem_dir() or event_create_dir() assigns the result to the structure. But it's assigning the ERR_PTR and not NULL. This was passed to eventfs_remove_rec() which expects either a good pointer or a NULL, not ERR_PTR. The fix is to not assign the ERR_PTR to the structure, but to keep it NULL on error. - Fix list_for_each_rcu() to use list_for_each_srcu() in dcache_dir_open_wrapper(). One iteration of the code used RCU but because it had to call sleepable code, it had to be changed to use SRCU, but one of the iterations was missed. - Fix synthetic event print function to use "as_u64" instead of passing in a pointer to the union. To fix big/little endian issues, the u64 that represented several types was turned into a union to define the types properly. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZQCvoBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtgrAP9MiYiCMU+90oJ+61DFchbs3y7BNidP s3lLRDUMJ935NQD/SSAm54PqWb+YXMpD7m9+3781l6xqwfabBMXNaEl+FwA= =tlZu -----END PGP SIGNATURE----- Merge tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Add missing LOCKDOWN checks for eventfs callers When LOCKDOWN is active for tracing, it causes inconsistent state when some functions succeed and others fail. - Use dput() to free the top level eventfs descriptor There was a race between accesses and freeing it. - Fix a long standing bug that eventfs exposed due to changing timings by dynamically creating files. That is, If a event file is opened for an instance, there's nothing preventing the instance from being removed which will make accessing the files cause use-after-free bugs. - Fix a ring buffer race that happens when iterating over the ring buffer while writers are active. Check to make sure not to read the event meta data if it's beyond the end of the ring buffer sub buffer. - Fix the print trigger that disappeared because the test to create it was looking for the event dir field being filled, but now it has the "ef" field filled for the eventfs structure. - Remove the unused "dir" field from the event structure. - Fix the order of the trace_dynamic_info as it had it backwards for the offset and len fields for which one was for which endianess. - Fix NULL pointer dereference with eventfs_remove_rec() If an allocation fails in one of the eventfs_add_*() functions, the caller of it in event_subsystem_dir() or event_create_dir() assigns the result to the structure. But it's assigning the ERR_PTR and not NULL. This was passed to eventfs_remove_rec() which expects either a good pointer or a NULL, not ERR_PTR. The fix is to not assign the ERR_PTR to the structure, but to keep it NULL on error. - Fix list_for_each_rcu() to use list_for_each_srcu() in dcache_dir_open_wrapper(). One iteration of the code used RCU but because it had to call sleepable code, it had to be changed to use SRCU, but one of the iterations was missed. - Fix synthetic event print function to use "as_u64" instead of passing in a pointer to the union. To fix big/little endian issues, the u64 that represented several types was turned into a union to define the types properly. * tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec() tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper() tracing/synthetic: Print out u64 values properly tracing/synthetic: Fix order of struct trace_dynamic_info selftests/ftrace: Fix dependencies for some of the synthetic event tests tracing: Remove unused trace_event_file dir field tracing: Use the new eventfs descriptor for print trigger ring-buffer: Do not attempt to read past "commit" tracefs/eventfs: Free top level files on removal ring-buffer: Avoid softlockup in ring_buffer_resize() tracing: Have event inject files inc the trace array ref count tracing: Have option files inc the trace array ref count tracing: Have current_trace inc the trace array ref count tracing: Have tracing_max_latency inc the trace array ref count tracing: Increase trace array ref count on enable and filter files tracefs/eventfs: Use dput to free the toplevel events directory tracefs/eventfs: Add missing lockdown checks tracefs: Add missing lockdown check to tracefs_create_dir() |
||
Arnaldo Carvalho de Melo
|
c2122b687c |
tools headers UAPI: Update tools's copy of drm.h headers
Picking the changes from:
ad9ee11fdf113f96 ("drm/doc: document that PRIME import/export is always supported")
2ff4f6d410afa762 ("drm/doc: document drm_event and its types")
9a2eabf48ade4fba ("drm/doc: use proper cross-references for sections")
c7a4722971691562 ("drm/syncobj: add IOCTL to register an eventfd")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2023-09-13 08:54:45.170134002 -0300
+++ after 2023-09-13 08:55:06.612712776 -0300
@@ -108,6 +108,7 @@
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
+ [0xCF] = "SYNCOBJ_EVENTFD",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/lkml/ZQGkh9qlhpKA%2FSMY@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
15ca35494e |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
1b5277c0ea0b2473 ("x86/srso: Add SRSO_NO support")
8974eb588283b7d4 ("x86/speculation: Add Gather Data Sampling mitigation")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZQGismCqcDddjEIQ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
678ddf730a |
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
To keep perf building in systems where types and defines used in this
new benchmark are not available, such as:
12 13.46 centos:stream : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-20) (GCC)
bench/sched-seccomp-notify.c: In function 'user_notif_syscall':
bench/sched-seccomp-notify.c:55:27: error: 'SECCOMP_RET_USER_NOTIF' undeclared (first use in this function); did you mean 'SECCOMP_RET_ERRNO'?
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:49:59: note: in definition of macro 'BPF_STMT'
#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
^
bench/sched-seccomp-notify.c:55:27: note: each undeclared identifier is reported only once for each function it appears in
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:49:59: note: in definition of macro 'BPF_STMT'
#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
^
bench/sched-seccomp-notify.c:55:3: error: missing initializer for field 'k' of 'struct sock_filter' [-Werror=missing-field-initializers]
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF),
^~~~~~~~
In file included from bench/sched-seccomp-notify.c:5:
/git/perf-6.6.0-rc1/tools/include/uapi/linux/filter.h:28:8: note: 'k' declared here
__u32 k; /* Generic multiuse field */
^
bench/sched-seccomp-notify.c: In function 'user_notification_sync_loop':
bench/sched-seccomp-notify.c:70:28: error: storage size of 'resp' isn't known
struct seccomp_notif_resp resp;
^~~~
bench/sched-seccomp-notify.c:71:23: error: storage size of 'req' isn't known
struct seccomp_notif req;
^~~
bench/sched-seccomp-notify.c:76:23: error: 'SECCOMP_IOCTL_NOTIF_RECV' undeclared (first use in this function); did you mean 'SECCOMP_MODE_STRICT'?
if (ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req))
^~~~~~~~~~~~~~~~~~~~~~~~
SECCOMP_MODE_STRICT
bench/sched-seccomp-notify.c:86:23: error: 'SECCOMP_IOCTL_NOTIF_SEND' undeclared (first use in this function); did you mean 'SECCOMP_RET_ACTION'?
if (ioctl(listener, SECCOMP_IOCTL_NOTIF_SEND, &resp))
^~~~~~~~~~~~~~~~~~~~~~~~
SECCOMP_RET_ACTION
bench/sched-seccomp-notify.c:71:23: error: unused variable 'req' [-Werror=unused-variable]
struct seccomp_notif req;
^~~
bench/sched-seccomp-notify.c:70:28: error: unused variable 'resp' [-Werror=unused-variable]
struct seccomp_notif_resp resp;
^~~~
14 11.31 debian:10 : FAIL gcc version 8.3.0 (Debian 8.3.0-6)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZQGhjaojgOGtSNk6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
417ecb614f |
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
The new 'perf bench' for sched-seccomp-notify uses defines and types not
available in older systems where we want to have perf available, so grab
a copy of this UAPI from the kernel sources to allow that.
This will be checked in the future for drift from the original when we
build the perf tool, that will warn when that happens like:
make: Entering directory '/var/home/acme/git/perf-tools/tools/perf'
BUILD: Doing 'make -j32' parallel build
Warning: Kernel ABI header differences:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZQGhMXtwX7RvV3ya@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
f7875966dc |
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
To pick the changes in these csets:
c35559f94ebc3e3b ("x86/shstk: Introduce map_shadow_stack syscall")
78252deb023cf087 ("arch: Register fchmodat2, usually as syscall 452")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e fchmodat*,map_shadow_stack --max-events=4
Using CPUID AuthenticAMD-25-21-0
Reusing "openat" BPF sys_enter augmenter for "fchmodat"
event qualifier tracepoint filter: (common_pid != 3499340 && common_pid != 11259) && (id == 268 || id == 452 || id == 453)
^C#
And it'll work as with other syscalls, for instance openat:
# perf trace -e openat* --max-events=4
0.000 ( 0.015 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 11
0.068 ( 0.019 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.pressure", flags: RDONLY|CLOEXEC) = 11
0.119 ( 0.008 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.current", flags: RDONLY|CLOEXEC) = 11
0.138 ( 0.006 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.min", flags: RDONLY|CLOEXEC) = 11
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -E fchmodat\|sys_map_shadow_stack
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:258 n64 fchmodat sys_fchmodat
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:452 n64 fchmodat2 sys_fchmodat2
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:297 common fchmodat sys_fchmodat
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:452 common fchmodat2 sys_fchmodat2
tools/perf/arch/s390/entry/syscalls/syscall.tbl:299 common fchmodat sys_fchmodat sys_fchmodat
tools/perf/arch/s390/entry/syscalls/syscall.tbl:452 common fchmodat2 sys_fchmodat2 sys_fchmodat2
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:268 common fchmodat sys_fchmodat
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:452 common fchmodat2 sys_fchmodat2
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:453 64 map_shadow_stack sys_map_shadow_stack
$
$ grep -Ew map_shadow_stack\|fchmodat2 /tmp/build/perf-tools/arch/x86/include/generated/asm/syscalls_64.c
[452] = "fchmodat2",
[453] = "map_shadow_stack",
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/lkml/ZP8bE7aXDBu%2Fdrak@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Kuniyuki Iwashima
|
8637d8e8b6 |
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
We add these 8 test cases in bind_wildcard.c to check bind() conflicts. 1st bind() 2nd bind() --------- --------- 0.0.0.0 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 0.0.0.0 0.0.0.0 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 0.0.0.0 127.0.0.1 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 127.0.0.1 127.0.0.1 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 127.0.0.1 All test passed without bhash2 and with bhash2 and this series. Before bhash2: $ uname -r 6.0.0-rc1-00393-g0bf73255d3a3 $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Just after bhash2: $ uname -r 6.0.0-rc1-00394-g28044fc1d495 $ ./bind_wildcard ... ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 15 / 16 tests passed. On net.git: $ ./bind_wildcard ... not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 13 / 16 tests passed. With this series: $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Kuniyuki Iwashima
|
2895d879dd |
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
This is a preparation patch for the following patch. Let's define expected_errno in each test case so that we can add other test cases easily. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Kuniyuki Iwashima
|
0071d15517 |
selftest: tcp: Fix address length in bind_wildcard.c.
The selftest passes the IPv6 address length for an IPv4 address.
We should pass the correct length.
Note inet_bind_sk() does not check if the size is larger than
sizeof(struct sockaddr_in), so there is no real bug in this
selftest.
Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Artem Savkov
|
d128860dbb |
selftests/bpf: fix unpriv_disabled check in test_verifier
Commit 1d56ade032a49 changed the function get_unpriv_disabled() to
return its results as a bool instead of updating a global variable, but
test_verifier was not updated to keep in line with these changes. Thus
unpriv_disabled is always false in test_verifier and unprivileged tests
are not properly skipped on systems with unprivileged bpf disabled.
Fixes: 1d56ade032a49 ("selftests/bpf: Unprivileged tests for test_loader.c")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912120631.213139-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Linus Torvalds
|
a747acc0b7 |
linux-kselftest-next-6.6-rc2
This kselftest fixes update for Linux 6.6-rc2 consists of fixes
-- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang.
-- to install symlinks required for test execution to avoid test
failures.
-- kselftest dependency checker script argument parsing.
-----BEGIN PGP SIGNATURE-----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=8/pm
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang
- install symlinks required for test execution to avoid test
failures
- kselftest dependency checker script argument parsing
* tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Keep symlinks, when possible
selftests: fix dependency checker script
kselftest/runner.sh: Propagate SIGTERM to runner child
selftests/ftrace: Correctly enable event in instance-event.tc
|
||
Masami Hiramatsu (Google)
|
7e021da80f |
selftests: tracing: Fix to unmount tracefs for recovering environment
Fix to unmount the tracefs if the ftracetest mounted it for recovering system environment. If the tracefs is already mounted, this does nothing. Suggested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/ Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Andrii Nakryiko
|
4eb94a7793 |
selftests/bpf: ensure all CI arches set CONFIG_BPF_KPROBE_OVERRIDE=y
Turns out CONFIG_BPF_KPROBE_OVERRIDE=y is only enabled in x86-64 CI, but is not set on aarch64, causing CI failures ([0]). Move CONFIG_BPF_KPROBE_OVERRIDE=y to arch-agnostic CI config. [0] https://github.com/kernel-patches/bpf/actions/runs/6122324047/job/16618390535 Fixes: 7182e56411b9 ("selftests/bpf: Add kprobe_multi override test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230912055928.1704269-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Daniel Bristot de Oliveira
|
301deca09b |
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
timerlat auto-analysis takes note of all IRQs, before or after the execution of the timerlat thread. Because we cannot go backward in the trace (we will fix it when moving to trace-cmd lib?), timerlat aa take note of the last IRQ execution in the waiting for the IRQ state, and then print it if it is executed after the expected timer IRQ starting time. After the thread sample, the timerlat starts recording the next IRQs as "previous" irq for the next occurrence. However, if an IRQ happens after the thread measurement but before the tracing stops, it is classified as a previous IRQ. That is not wrong, as it can be "previous" for the subsequent activation. What is wrong is considering it as a potential source for the last activation. Ignore the IRQ interference that happens after the IRQ starting time for now. A future improvement for timerlat can be either keeping a list of previous IRQ execution or using the trace-cmd library. Still, it requires further investigation - it is a new feature. Link: https://lore.kernel.org/lkml/a44a3f5c801dcc697bacf7325b65d4a5b0460537.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> |
||
|
Daniel Bristot de Oliveira
|
6c73daf264 |
rtla/timerlat_aa: Fix negative IRQ delay
When estimating the IRQ timer delay, we are dealing with two different clock sources: the external clock source that timerlat uses as a reference and the clock used by the tracer. There are also two moments: the time reading the clock and the timer in which the event is placed in the buffer (the trace event timestamp). If the processor is slow or there is some hardware noise, the difference between the timestamp and the external clock, read can be longer than the IRQ handler delay, resulting in a negative time. If so, set IRQ to start delay as 0. In the end, it is less near-zero and relevant then the noise. Link: https://lore.kernel.org/lkml/a066fb667c7136d86dcddb3c7ccd72587db3e7c7.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> |
||
|
Daniel Bristot de Oliveira
|
02d89917ef |
rtla/timerlat_aa: Zero thread sum after every sample analysis
The thread thread_thread_sum accounts for thread interference during a single activation. It was not being zeroed, so it was accumulating thread interference over all activations. It was not that visible when timerlat was the highest priority. Link: https://lore.kernel.org/lkml/97bff55b0141f2d01b47d9450a5672fde147b89a.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> |
||
Eduard Zingerman
|
e4c3116473 |
selftests/bpf: Offloaded prog after non-offloaded should not cause BUG
Check what happens if non-offloaded dev bound BPF program is followed by offloaded dev bound program. Test case adapated from syzbot report [1]. [1] https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/ Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230912005539.2248244-3-eddyz87@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Josh Poimboeuf
|
72178d5d1a |
objtool: Fix _THIS_IP_ detection for cold functions
Cold functions and their non-cold counterparts can use _THIS_IP_ to
reference each other. Don't warn about !ENDBR in that case.
Note that for GCC this is currently irrelevant in light of the following
commit
c27cd083cfb9 ("Compiler attributes: GCC cold function alignment workarounds")
which disabled cold functions in the kernel. However this may still be
possible with Clang.
Fixes several warnings like the following:
drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1
drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb
net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b
net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
|
||
Naresh Kamboju
|
7ab6fe6625 |
selftests: user_events: create test-specific Kconfig fragments
Create the config file in user_events directory of testcase which
need more kernel configuration than the default defconfig. User
could use these configs with merge_config.sh script:
The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read
data from the following files,
- "/sys/kernel/tracing/user_events_data"
- "/sys/kernel/tracing/user_events_status"
- "/sys/kernel/tracing/events/user_events/*"
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/user_events/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
Steven Rostedt (Google)
|
7dc1e125f0 |
ftrace/selftests: Add softlink to latest log directory
When I'm debugging something with the ftrace selftests and need to look at the logs, it becomes tedious that I need to do the following: ls -ltr logs [ copy the last directory ] ls logs/<paste-last-dir> to see where the logs are. Instead, do the common practice of having a "latest" softlink to the last run selftest. This way after running the selftest I only need to do: ls logs/latest/ and it will always give me the directory of the last run selftest logs! Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Beau Belgrave
|
a06023a8f7 |
selftests/user_events: Fix failures when user_events is not installed
When user_events is not installed the self tests currently fail. Now
that these self tests run by default we need to ensure they don't fail
when user_events was not enabled for the kernel being tested.
Add common methods to detect if tracefs and user_events is enabled. If
either is not enabled skip the test. If tracefs is enabled, but is not
mounted, mount tracefs and fail if there were any errors. Fail if not
run as root.
Fixes: 68b4d2d58389 ("selftests/user_events: Reenable build")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
Stanislav Fomichev
|
b772b70b69 |
selftests/bpf: Update bpf_clone_redirect expected return code
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") started propagating proper NET_XMIT_DROP error to the caller
which means it's now possible to get positive error code when calling
bpf_clone_redirect() in this particular test. Update the test to reflect
that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-2-sdf@google.com
|
||
|
Stanislav Fomichev
|
7cb779a686 |
bpf: Clarify error expectations from bpf_clone_redirect
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
|
||
Hou Tao
|
f0a42ab589 |
selftests/bpf: Test all valid alloc sizes for bpf mem allocator
Add a test to test all possible and valid allocation size for bpf memory allocator. For each possible allocation size, the test uses the following two steps to test the alloc and free path: 1) allocate N (N > high_watermark) objects to trigger the refill executed in irq_work. 2) free N objects to trigger the freeing executed in irq_work. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Arnaldo Carvalho de Melo
|
a6e414a4cb |
perf tools: Update copy of libbpf's hashmap.c
To pick the changes in:
a3e7e6b17946f48b ("libbpf: Remove HASHMAP_INIT static initialization helper")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Ding Xiang
|
61ba93b435 |
selftests: ALSA: remove unused variables
These variables are never referenced in the code, just remove them. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230908081040.197243-1-dingxiang@cmss.chinamobile.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Juntong Deng
|
ced33ca07d |
selftests/net: Improve bind_bhash.sh to accommodate predictable network interface names
Starting with v197, systemd uses predictable interface network names, the traditional interface naming scheme (eth0) is deprecated, therefore it cannot be assumed that the eth0 interface exists on the host. This modification makes the bind_bhash test program run in a separate network namespace and no longer needs to consider the name of the network interface on the host. Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
535a265d7f |
perf tools changes for v6.6:
perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees/branches to the
MAINTAINERS file. That is where development now takes place and myself and
Namhyung Kim have write access, more people to come as we emulate other
maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that global variables can
be resolved and used in tools that do data profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c file was passed as
an event: "perf trace -e hello.c" to then get compiled and loaded.
The only known usage for that, that shipped with the kernel as an example for such events,
augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all
the user space components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space type beautifiers changed,
now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall types, as discussed with
Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings,
some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of
nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
#
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for
licensing reasons, and we missed a build test on tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when building with
BUILD_NONDISTRO=1 because a needed initialization routine was being "error
checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it fails.
We better back propagate the error, but at least 'perf annotate' on samples
collected for a BPF program is back working when perf is built with
BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was preventing navigation of
lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file collected
on one architecture to have registers sampled correctly displayed when
analysis tools such as 'perf report' and 'perf script' are used on a different
architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and then read
also via pipe mode with a different version of perf, where the event attr
record may have changed, use the record size field to properly support this
version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the error
message state that instead of stating that some minimal kernel version is
needed to have that feature. This seems just a tool limitation, the kernel
probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the result
of a thread__find_symbol_fb() is not matched with an addr_location__exit()
to drop the reference counts of the resolved components (machine, thread, map,
symbol, etc). Add a dlfilter test to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related to problems
found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when perf is
built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters.
- Add perf record sample filtering test, things like the following example, that gets
implemented as a BPF filter attached to the event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is linked,
using 'perf version --build-options' instead of the more expensinve
'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree, same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler format so that one can use
the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's
Google Summer of Code.
One can generate the output and upload it to the web interface but Anup also automated
everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes with/without
BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra
'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE to error routines,
so that the output can show were the parsing error was found.
- Add 'perf test' entries to check the parsing of events improvements.
- Fix various leak for things detected by -fsanitize=address, mostly things that would
be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in 'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the caller fails
to do all it needs.
- Adjust various compiler options to not consider errors some warnings when
building with broken headers found in things like python, flex, bison, as we
otherwise build with -Werror. Some for gcc, some for clang, some for some
specific version of those, some for some specific version of flex or bison, or
some specific combination of these components, bah.
- Allow customization of clang options for BPF target, this helps building on
gentoo where there are other oddities where BPF targets gets passed some compiler
options intended for the native build, so building with WERROR=0 helps while
these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock',
fixing some segfaults when handling some odd failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs (tools/perf/Documentation).
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo.
- Update scale units and descriptions of common topdown metrics on aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints.
- Update files for the power10 platform.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+
J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr
HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ=
=d12c
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
|
||
|
Linus Torvalds
|
3095dd99dd |
XArray/IDA updates for 6.6
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmT7XLYACgkQDpNsjXcp
gj6qrAf+LiAs3dUELOjrqaQQbbNGp4na+YwJCiezuvwZn8P+ieJpt6QCEDHEb1jH
LCOjr0GFMhHnAWp9Q0Qay4IXoKk8DPkA/avSaZgsl5blmMyNqFMgHklU7mjRvhCG
ayb/NeZYwrJhA9NyueXYuH3h7QDryxyIN3TZS1/7z13YrohMIQeu3q7X/ZBMh7NS
uPd7vmDj8TnZ/agQzplQ4XDov9lrzkUXDJqpMvn/Gbr4K7y66UZa3SLxi1JPrnah
ffDvBlK2OImNBoaADfiRImWc7QlXVkF/B08xUcJ6tXAeO6xJDykkie+gjsF2S040
YP2YIG+IWi47zqa25EuxFRtavwUh6w==
=4GKy
-----END PGP SIGNATURE-----
Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
|
||
Naveen N Rao
|
145036f88d |
selftests/ftrace: Fix dependencies for some of the synthetic event tests
Commit b81a3a100cca1b ("tracing/histogram: Add simple tests for
stacktrace usage of synthetic events") changed the output text in
tracefs README, but missed updating some of the dependencies specified
in selftests. This causes some of the tests to exit as unsupported.
Fix this by changing the grep pattern. Since we want these tests to work
on older kernels, match only against the common last part of the
pattern.
Link: https://lore.kernel.org/linux-trace-kernel/20230614091046.2178539-1-naveen@kernel.org
Cc: <linux-kselftest@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Fixes: b81a3a100cca ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Jiri Olsa
|
7182e56411 |
selftests/bpf: Add kprobe_multi override test
Adding test that tries to attach program with bpf_override_return helper to function not within error injection list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org |