IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit c8bd922d924bb4ab6c6c488310157d1a27996f31 ]
Like other SPI controller flags, bits_per_word_mask may be used by a
peripheral driver, so it needs to reflect the capabilities of the
underlying controller.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-3-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce1dac560a74220f2e53845ec0723b562288aed4 ]
While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was
claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective
device trees don't add DMA channels. The Reference manuals of i.MX31 and
i.MX25 also don't mention the CSPI core being DMA capable. (I didn't
check the others.)
Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed
DMA channel requests") this results in an error message
spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!
during boot. However that isn't fatal and the driver gets loaded just
fine, just without using DMA.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a69c1264ff41bc5bf7c03101ada0454fbf08868 ]
During dummy-cycles xSPI will switch GPIO into Hi-Z mode. In that dummy
period voltage on data lines will slowly drop, what can cause
unintentional modebyte transmission. Value send to SPI memory chip will
depend on last address, and clock frequency.
To prevent unforeseen consequences of that behaviour, force send
single modebyte(0x00).
Modebyte will be send only if number of dummy-cycles is not equal
to 0. Code must also reduce dummycycle byte count by one - as one byte
is send as modebyte.
Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
Link: https://msgid.link/r/20240529074037.1345882-2-wsadowski@marvell.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63deee52811b2f84ed2da55ad47252f0e8145d62 upstream.
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2bd0791c5f02e964402624dfff45ca8995f5397 upstream.
Misplaced parenthesis make test of mode wrong in case mode is equal to
SPI_TX_OCTAL or SPI_RX_OCTAL.
Simplify this sanity test, if one of this bit is set, property
cs-gpio must be present in DT.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df75470b317b46affbe1f5f8f006b34175be9789 ]
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in
6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before
15a6af94a277 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl>
Cc: Stefan Bigler <linux@bigler.io>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Thorsten Scherer <T.Scherer@eckelmann.de>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eecb644b8b82f5279a348f6ebe77e3d6e5b1b05 ]
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d7c452a26564ef0c427f2806761b857106d8c4 ]
The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.
Fixes: c64e7efe46b7 ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f788ba457b45b0ce422943fcec9fa35c4587764 ]
There is no need to set the DMA mapped flag of the message if it has
no mapped transfers. Moreover, it may give the code a chance to take
the wrong paths, i.e. to exercise DMA related APIs on unmapped data.
Make __spi_map_msg() to bail earlier on the above mentioned cases.
Fixes: 99adef310f68 ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef13561d2b163ac0ae6befa53bca58a26dc3320b upstream.
Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.
CC: stable@vger.kernel.org
Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240508-fox-unpiloted-b97e1535627b@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4756fa529b2f12b7cb8f21fe229b0f6f47190829 ]
If spi_sync() is called with the non-empty queue and the same spi_message
is then reused, the complete callback for the message remains set while
the context is cleared, leading to a null pointer dereference when the
callback is invoked from spi_finalize_current_message().
With function inlining disabled, the call stack might look like this:
_raw_spin_lock_irqsave from complete_with_flags+0x18/0x58
complete_with_flags from spi_complete+0x8/0xc
spi_complete from spi_finalize_current_message+0xec/0x184
spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474
spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230
__spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4
__spi_transfer_message_noqueue from __spi_sync+0x204/0x248
__spi_sync from spi_sync+0x24/0x3c
spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd]
mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154
_regmap_raw_read from _regmap_bus_read+0x44/0x70
_regmap_bus_read from _regmap_read+0x60/0xd8
_regmap_read from regmap_read+0x3c/0x5c
regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd]
mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd]
mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x118/0x1f4
irq_thread from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x28
Fix this by also setting message->complete to NULL when the transfer is
complete.
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7430764f5a85d30314aeef2d5438dff1fb0b1d68 ]
Due to the reading of FIFO during the dump of data registers in
debugfs, if SPI transmission is in progress, it will be affected
and may result in transmission failure. Therefore, the dump
interface of data registers in debugfs is removed.
Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20240416015839.3323398-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0064db9ce4aa7cc794e6f4aed60dee0f94fc9bcf ]
The version format string in the AXI SPI Engine driver was probably
intended to print the version number in the same format as the DT
compatible string (e.g. 1.00.a). However, the version just uses
semantic versioning so formatting the patch number as a character
is not correct and would result in printing control characters for
patch numbers less than 32.
Fixes: b1353d1c1d45 ("spi: Add Analog Devices AXI SPI Engine controller support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240412-axi-spi-engine-version-printf-v1-1-95e1e842c1a6@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88c2b56c2690061121cad03f0f551db465287575 ]
This avoid duplicating the same macros in multiple drivers by reusing
the common AXI macros for the version register.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240202213132.3863124-2-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f970ecb77b6759d37ee743fc36fc0daba960e75 ]
This moves the message state in the AXI SPI Engine driver to a new
struct spi_engine_msg_state.
Previously, the driver state contained various pointers that pointed
to memory owned by a struct spi_message. However, it did not set any of
these pointers to NULL when a message was completed. This could lead to
use after free bugs.
Example of how this could happen:
1. SPI core calls into spi_engine_transfer_one_message() with msg1.
2. Assume something was misconfigured and spi_engine_tx_next() is not
called enough times in interrupt callbacks for msg1 such that
spi_engine->tx_xfer is never set to NULL before the msg1 completes.
3. SYNC interrupt is received and spi_finalize_current_message() is
called for msg1. spi_engine->msg is set to NULL but no other
message-specific state is reset.
4. Caller that sent msg1 is notified of the completion and frees msg1
and the associated xfers and tx/rx buffers.
4. SPI core calls into spi_engine_transfer_one_message() with msg2.
5. When spi_engine_tx_next() is called for msg2, spi_engine->tx_xfer is
still be pointing to an xfer from msg1, which was already freed.
spi_engine_xfer_next() tries to access xfer->transfer_list of one
of the freed xfers and we get a segfault or undefined behavior.
To avoid issues like this, instead of putting per-message state in the
driver state struct, we can make use of the struct spi_message::state
field to store a pointer to a new struct spi_engine_msg_state. This way,
all of the state that belongs to specific message stays with that
message and we don't have to remember to manually reset all aspects of
the message state when a message is completed. Rather, a new state is
allocated for each message.
Most of the changes are just renames where the state is accessed. One
place where this wasn't straightforward was the sync_id member. This
has been changed to use ida_alloc_range() since we needed to separate
the per-message sync_id from the per-controller next available sync_id.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231117-axi-spi-engine-series-1-v1-9-cc59db999b87@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e12cd96e8e93044646fdf4b2c9a1de62cfa01e7c ]
This modifies the AXI SPI Engine driver to use devm_spi_alloc_host()
instead of spi_alloc_host() to simplify the code a bit.
In addition to simplifying the error paths in the probe function, we
can also remove spi_controller_get/put() calls in the remove function
since devm_spi_alloc_host() sets a flag to no longer decrement the
controller reference count in the spi_unregister_controller() function.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231117-axi-spi-engine-series-1-v1-4-cc59db999b87@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e4ce5220eedea2cc440f3961dec1b5122e815b2 ]
This simplifies the private data allocation in the AXI SPI Engine driver
by making use of the feature built into the spi_alloc_host() function
instead of doing it manually.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231117-axi-spi-engine-series-1-v1-3-cc59db999b87@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a08199b309f833fd4221ab5ee2391c791fe26385 ]
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230823133938.1359106-6-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f886a7bfb3faf4c1021e73f045538008ce7634e ]
In function pci1xxxx_spi_probe, there is a potential null pointer that
may be caused by a failed memory allocation by the function devm_kzalloc.
Hence, a null pointer check needs to be added to prevent null pointer
dereferencing later in the code.
To fix this issue, spi_bus->spi_int[iter] should be checked. The memory
allocated by devm_kzalloc will be automatically released, so just directly
return -ENOMEM without worrying about memory leaks.
Fixes: 1cc0cbea7167 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Link: https://msgid.link/r/20240403014221.969801-1-qq810974084@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3d3eab627bbbb0cb175910cf8d0f7022628a642 ]
If the SPI data size is smaller than FIFO, it operates in PIO mode,
and if it is larger than FIFO size, it oerates in DMA mode.
If the SPI data size is equal to fifo, it operates in PIO mode and it is
separated to 2 transfers. To prevent it, it must operate in DMA mode
from the case where the data size and the fifo size are the same.
Fixes: 1ee806718d5e ("spi: s3c64xx: support interrupt based pio mode")
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240329085840.65856-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6e776ab6abdfce5a1edcde7a22c639e76499939 ]
Determine the FIFO depth only once, at probe time.
``sdd->fifo_depth`` can be set later on with the FIFO depth
specified in the device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-5-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6911cf27e5c8491cbfedd4ae2d1ee74a3e685b4 ]
The driver is wrong because is using partial register field masks for the
SPI_STATUS.{RX, TX}_FIFO_LVL register fields.
We see s3c64xx_spi_port_config.fifo_lvl_mask with different values for
different instances of the same IP. Take s5pv210_spi_port_config for
example, it defines:
.fifo_lvl_mask = { 0x1ff, 0x7F },
fifo_lvl_mask is used to determine the FIFO depth of the instance of the
IP. In this case, the integrator uses a 256 bytes FIFO for the first SPI
instance of the IP, and a 64 bytes FIFO for the second instance. While
the first mask reflects the SPI_STATUS.{RX, TX}_FIFO_LVL register
fields, the second one is two bits short. Using partial field masks is
misleading and can hide problems of the driver's logic.
Allow platforms to specify the full FIFO mask, regardless of the FIFO
depth.
Introduce {rx, tx}_fifomask to represent the SPI_STATUS.{RX, TX}_FIFO_LVL
register fields. It's a shifted mask defining the field's length and
position. We'll be able to deprecate the use of @rx_lvl_offset, as the
shift value can be determined from the mask. The existing compatibles
shall start using {rx, tx}_fifomask so that they use the full field mask
and to avoid shifting the mask to position, and then shifting it back to
zero in the {TX, RX}_FIFO_LVL macros.
@rx_lvl_offset will be deprecated in a further patch, after we have the
infrastructure to deprecate @fifo_lvl_mask as well.
No functional change intended.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-4-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff8faa8a5c0f4c2da797cd22a163ee3cc8823b13 ]
Define a magic value, it will be used in the next patch as well.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-3-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d47e411f4d636519a8d26587928d34cf52c0c1f ]
Else case is not needed after a return, remove it.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240207120431.2766269-9-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4568fa574fcef3811a8140702979f076ef0f5bc0 ]
The driver uses GENMASK() but does not include <linux/bits.h>.
It is good practice to directly include all headers used, it avoids
implicit dependencies and spurious breakage if someone rearranges
headers and causes the implicit include to vanish.
Include the missing header.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240207120431.2766269-4-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a77ce80f63f06d7ae933c332ed77c79136fa69b0 ]
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240207120431.2766269-2-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 460efee706c2b6a4daba62ec143fea29c2e7b358 ]
Simplify the code by extracting all cases of FIFO depth calculation into
a dedicated macro. No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://msgid.link/r/20240120170001.3356-1-semen.protsenko@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a3d3eab627bb ("spi: s3c64xx: Use DMA mode from fifo size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ]
The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.
Add a check to trans->tx_buf before using it.
Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6d79a0f5769b5f4d9579ddaf88d2c30b03b873 ]
c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
corrects three cases of setting the ECSPI burst length but erroneously
leaves the in-range CPU case one bit to big (in that field a value of
0 means 1 bit). The effect was that transmissions that should have been
8-bit bytes appeared as 9-bit causing failed communication with SPI
devices.
Link: https://lore.kernel.org/all/20240201105451.507005-1-carlos.song@nxp.com/
Link: https://lore.kernel.org/all/20240204091912.36488-1-carlos.song@nxp.com/
Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Signed-off-by: Adam Butcher <adam@jessamine.co.uk>
Link: https://msgid.link/r/20240318175119.3334-1-adam@jessamine.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ae0ab0143fcc06190713ed81a6486ed0ad3c861 ]
fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
kernfs_find_ns
kernfs_find_and_get_ns
sysfs_remove_group
sysfs_remove_groups
device_remove_attrs
device_del
spi_unregister_controller
devm_spi_unregister
release_nodes
devres_release_all
really_probe
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240312112050.2503643-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f44e3808200c1434c26ef459722f88f48b306df ]
Add Intel Lunar Lake-M PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240212082027.2462849-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32ce3bb57b6b402de2aec1012511e7ac4e7449dc ]
dev_get_drvdata() gets used to acquire the pointer to cqspi and the SPI
controller. Neither embed the other; this lead to memory corruption.
On a given platform (Mobileye EyeQ5) the memory corruption is hidden
inside cqspi->f_pdata. Also, this uninitialised memory is used as a
mutex (ctlr->bus_lock_mutex) by spi_controller_suspend().
Fixes: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-1-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f4b0c6425eb9ffd9bf62b8b8143e786b6ba695 ]
As it devm_pm_runtime_enable can fail due to memory allocations, it is
best to handle the error.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de8b6e1c231a95abf95ad097b993d34b31458ec9 ]
Return IRQ_NONE from the interrupt handler when no interrupt was
detected. Because an empty interrupt will cause a null pointer error:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
complete+0x54/0x100
hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx]
__handle_irq_event_percpu+0x64/0x1e0
handle_irq_event+0x7c/0x1cc
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8afe3c7fcaf72fca1e7d3dab16a5b7f4201ece17 ]
This adds the PCI ID of the Arrow Lake and Meteor Lake-S PCH SPI serial
flash controller. This one supports all the necessary commands Linux
SPI-NOR stack requires.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3aa619a8b4706f35cb62f780c14e68796b37f3f ]
Since commit 24778be20f87 ("spi: convert drivers to use
bits_per_word_mask") the bits_per_word variable is only written to. The
check that was there before isn't needed any more as the spi core
ensures that only 8 bit transfers are used, so the variable can go away
together with all assignments to it.
Fixes: 24778be20f87 ("spi: convert drivers to use bits_per_word_mask")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240210164006.208149-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c712c05e46c8ce550842951e9e2606e24dbf0475 ]
For DMA mode, the bus width of the DMA is equal to the size of data
word, so burst length should be configured as bits per word.
For CPU mode, because of the spi transfer len is in byte, so calculate
the total number of words according to spi transfer len and bits per
word, burst length should be configured as total data bits.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Link: https://lore.kernel.org/r/20240204091912.36488-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c2ae772fe08e33f3d7a83849e85539320701abd ]
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 633cd6fe6e1993ba80e0954c2db127a0b1a3e66f ]
In the existing implementation, when executing interleaved write and read
operations in the ISR for a transfer length greater than the FIFO size,
the TXFIFO write precedes the RXFIFO read. Consequently, the initially
received data in the RXFIFO is pushed out and lost, leading to a failure
in data integrity. To address this issue, reverse the order of interleaved
operations and conduct the RXFIFO read followed by the TXFIFO write.
Fixes: 6afe2ae8dc48 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 574bf7bbe83794a902679846770f75a9b7f28176 ]
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.
Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c314425b9ef6b247cefd0903e287eb072580c3b ]
Turns out this "SoC" side controller does not support certain commands,
such as reading chip JEDEC ID, so the controller is pretty much unusable
in Linux. We should be using the "PCH" side controller instead. For this
reason remove this PCI ID from the list.
Fixes: c2912d42e86e ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17dc11a02d8dacc7e78968daa2a8c16281eb7d1e ]
The commit in Fixes has changed a devm_clk_get()/clk_prepare_enable() into
a devm_clk_get_enabled().
It has updated the error handling path of the probe accordingly, but the
remove has been left unchanged.
Remove now the redundant clk_disable_unprepare() call from the remove
function.
Fixes: a90a987ebe00 ("spi: use devm_clk_get_enabled() in mcfqspi_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/6670aed303e1f7680e0911387606a8ae069e2cef.1704464447.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5c7bcb499840551cfbe85c6df177ebc50432bf0 ]
Documentation says only DTDL of 200 is allowed for this SoC.
Fixes: 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cb475174cce1bfedf1025b6e235e2c43d81144f ]
cqspi_jh7110_clk_init() is called after clk_prepare_enable(cqspi->clk),
if it fails, it should goto label 'probe_reset_failed' to disable
cqspi->clk.
In the error path after calling cqspi_jh7110_clk_init(),
cqspi_jh7110_disable_clk() need be called.
Fixes: 33f1ef6d4eb6 ("spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129081147.628004-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 424a8166764e462258fdccaaefbdeb07517c8b21 ]
ZynqMP GQSPI driver no longer uses spi-master framework. It had been
converted to use spi-mem framework. So remove driver dependency from
spi-master and replace it with spi-mem.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1699282435-884917-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7a733e060bd20edb63b1f27f0b29cf9b184e0e8b upstream.
The commit 855a40cd8ccc ("spi: cadence: Add SPI transfer delays") adds a
delay after each transfer into the driver's transfer_one(). However,
the delay is already done in SPI core. So this commit unnecessarily
doubles the delay amount. Revert this commit.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20231206145233.74982-1-namcao@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc70d643a2f6678cbe0f5c86433c1aeb4d613fcc upstream.
The current Atmel SPI controller driver (v2) behaves incorrectly when
using two SPI devices with different clock polarities and GPIO CS.
When switching from one device to another, the controller driver first
enables the CS and then applies whatever configuration suits the targeted
device (typically, the polarities). The side effect of such order is the
apparition of a spurious clock edge after enabling the CS when the clock
polarity needs to be inverted wrt. the previous configuration of the
controller.
This parasitic clock edge is problematic when the SPI device uses that edge
for internal processing, which is perfectly legitimate given that its CS
was asserted. Indeed, devices such as HVS8080 driven by driver gpio-sr in
the kernel are shift registers and will process this first clock edge to
perform a first register shift. In this case, the first bit gets lost and
the whole data block that will later be read by the kernel is all shifted
by one.
Current behavior:
The actual switching of the clock polarity only occurs after the CS
when the controller sends the first message:
CLK ------------\ /-\ /-\
| | | | | . . .
\---/ \-/ \
CS -----\
|
\------------------
^ ^ ^
| | |
| | Actual clock of the message sent
| |
| Change of clock polarity, which occurs with the first
| write to the bus. This edge occurs when the CS is
| already asserted, and can be interpreted as
| the first clock edge by the receiver.
|
GPIO CS toggle
This issue is specific to this controller because while the SPI core
performs the operations in the right order, the controller however does
not. In practice, the controller only applies the clock configuration right
before the first transmission.
So this is not a problem when using the controller's dedicated CS, as the
controller does things correctly, but it becomes a problem when you need to
change the clock polarity and use an external GPIO for the CS.
One possible approach to solve this problem is to send a dummy message
before actually activating the CS, so that the controller applies the clock
polarity beforehand.
New behavior:
CLK ------\ /-\ /-\ /-\ /-\
| | | ... | | | | ... | |
\------/ \- -/ \------/ \- -/ \------
CS -\/-----------------------\
|| |
\/ \---------------------
^ ^ ^ ^ ^
| | | | |
| | | | Expected clock cycles when
| | | | sending the message
| | | |
| | | Actual GPIO CS activation, occurs inside
| | | the driver
| | |
| | Dummy message, to trigger clock polarity
| | reconfiguration. This message is not received and
| | processed by the device because CS is low.
| |
| Change of clock polarity, forced by the dummy message. This
| time, the edge is not detected by the receiver.
|
This small spike in CS activation is due to the fact that the
spi-core activates the CS gpio before calling the driver's
set_cs callback, which deactivates this gpio again until the
clock polarity is correct.
To avoid having to systematically send a dummy packet, the driver keeps
track of the clock's current polarity. In this way, it only sends the dummy
packet when necessary, ensuring that the clock will have the correct
polarity when the CS is toggled.
There could be two hardware problems with this patch:
1- Maybe the small CS activation peak can confuse SPI devices
2- If on a design, a single wire is used to select two devices depending
on its state, the dummy message may disturb them.
Fixes: 5ee36c989831 ("spi: atmel_spi update chipselect handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20231204154903.11607-1-louis.chauvet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 890188d2d7e4ac6c131ba166ca116cb315e752ee upstream.
Upstream commit e0205d6203c2 ("spi: atmel: Prevent false timeouts on
long transfers") has tried to mitigate the problem of getting spi
transfers canceled because they were lasting too long. On slow buses,
transfers in the MiB range can take more than one second and thus a
calculation was added to progressively increment the timeout value. In
order to not be too problematic from a user point of view (waiting dozen
of seconds or even minutes), the wait call was turned interruptible.
Turning the wait interruptible was a mistake as what we really wanted to
do was to be able to kill a transfer. Any signal interrupting our
transfer would not be suitable at all so a second attempt was made at
turning the wait killable instead.
Link: https://lore.kernel.org/linux-spi/20231127095842.389631-1-miquel.raynal@bootlin.com/
All being well, it was reported that JFFS2 was showing a splat when
interrupting a transfer. After some more debate about whether JFFS2
should be fixed and how, it was also pointed out that the whole
consistency of the filesystem in case of parallel I/O would be
compromised. Changing JFFS2 behavior would in theory be possible but
nobody has the energy and time and knowledge to do this now, so better
prevent spi transfers to be interrupted by the user.
Partially revert the blamed commit to no longer use the interruptible
nor the killable variant of wait_for_completion().
Fixes: e0205d6203c2 ("spi: atmel: Prevent false timeouts on long transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://lore.kernel.org/r/20231205083102.16946-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
