IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 3c0696076aad60a2f04c019761921954579e1b0e upstream.
It is currently possible for a userspace application to enter an
infinite page fault loop when using HugeTLB pages implemented with
contiguous PTEs when HAFDBS is not available. This happens because:
1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean
(PTE_DIRTY | PTE_RDONLY | PTE_WRITE).
2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling
the memory access on a system without HAFDBS, we will get a page
fault.
3. HugeTLB will check if it needs to update the dirty bits on the PTE.
For contiguous PTEs, it will check to see if the pgprot bits need
updating. In this case, HugeTLB wants to write a sequence of
sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about
to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()),
so it thinks no update is necessary.
We can get the kernel to write a sw-dirty, hw-clean PTE with the
following steps (showing the relevant VMA flags and pgprot bits):
i. Create a valid, writable contiguous PTE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE
ii. mprotect the VMA to PROT_NONE.
VMA vmflags: VM_SHARED
VMA pgprot bits: PTE_RDONLY
PTE pgprot bits: PTE_DIRTY | PTE_RDONLY
iii. mprotect the VMA back to PROT_READ | PROT_WRITE.
VMA vmflags: VM_SHARED | VM_READ | VM_WRITE
VMA pgprot bits: PTE_RDONLY | PTE_WRITE
PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY
Make it impossible to create a writeable sw-dirty, hw-clean PTE with
pte_modify(). Such a PTE should be impossible to create, and there may
be places that assume that pte_dirty() implies pte_hw_dirty().
Signed-off-by: James Houghton <jthoughton@google.com>
Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags")
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0a8574204054effad6ac83cc75c02576e2985fe ]
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
OBJCOPY arch/arm64/boot/Image
AS arch/arm64/boot/zboot-header.o
PAD arch/arm64/boot/vmlinux.bin
GZIP arch/arm64/boot/vmlinuz
OBJCOPY arch/arm64/boot/vmlinuz.o
LD arch/arm64/boot/vmlinuz.efi.elf
OBJCOPY arch/arm64/boot/vmlinuz.efi
The log "OBJCOPY arch/arm64/boot/Image" is displayed twice.
It indicates that two threads simultaneously enter arch/arm64/boot/
and write to arch/arm64/boot/Image.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
PAD arch/arm64/boot/vmlinux.bin
truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin'
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/arm64/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin'
make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on Image, but such a dependency is not specified
in arch/arm64/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: SImon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 59fa1e51ba54e1f513985a8177969b62973f7fd5 upstream.
MT8186's GPU speedbin value must be interpreted, or the value will not
be meaningful.
Use the correct "gpu-speedbin" nvmem cell name for the GPU speedbin to
allow triggering the cell info fixup handler, hence feeding the right
speedbin number to the users.
Cc: stable@vger.kernel.org
Fixes: 263d2fd02afc ("arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231005151150.355536-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9adf7580f6d498a5839e02fa1d1535e934364602 upstream.
Clocks for each power domain are split into big categories: pd clocks
and subsys clocks.
According to the binding, all clocks which have a dash '-' in their name
are treated as subsys clocks, and must be placed at the end of the list.
The other clocks which are pd clocks must come first.
Fixed the naming and the placing of all clocks in the power domains.
For the avoidance of doubt, prefixed all subsys clocks with the 'subsys'
prefix. The binding does not enforce strict clock names, the driver
uses them in bulk, only making a difference for pd clocks vs subsys clocks.
The above problem appears to be trivial, however, it leads to incorrect
power up and power down sequence of the power domains, because some
clocks will be mistakenly taken for subsys clocks and viceversa.
One consequence is the fact that if the DIS power domain goes power down
and power back up during the boot process, when it comes back up, there
are still transactions left on the bus which makes the display inoperable.
Some of the clocks for the DIS power domain were wrongly using '_' instead
of '-', which again made these clocks being treated as pd clocks instead of
subsys clocks.
Cc: stable@vger.kernel.org
Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dea1c724fc36643e83216c1f5a26613412150db upstream.
The NTC is defined as ntc@0 but it doesn't need any address at all.
Fix the unit_address_vs_reg warning by dropping the unit address: since
the node name has to be generic also fully rename it from ntc@0 to
thermal-sensor.
Cc: stable@vger.kernel.org
Fixes: ff9ea5c62279 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor")
Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a60d63439694590cd5ab1f998fc917ff7ba1c1d upstream.
The thermal zones are not a soc bus device: move it to the root
node to solve simple_bus_reg warnings.
Cc: stable@vger.kernel.org
Fixes: b325ce39785b ("arm64: dts: mt8183: add thermal zone node")
Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19cba9a6c071db57888dc6b2ec1d9bf8996ea681 upstream.
The reserved memory for scp had node name "scp_mem_region" and also
without unit-address: change the name to "memory@(address)".
This fixes a unit_address_vs_reg warning.
Cc: stable@vger.kernel.org
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61b94d54421a1f3670ddd5396ec70afe833e9405 upstream.
Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.
Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.
Cc: stable@vger.kernel.org
Fixes: 3b5838d1d82e ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24165c5dad7ba7c7624d05575a5e0cc851396c71 upstream.
Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators
by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0
and regulator-usb-p1.
Cc: stable@vger.kernel.org
Fixes: c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver")
Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74543b303a9abfe4fa253d1fa215281baa05ff3a upstream.
dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.
If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.
Cc: stable@vger.kernel.org
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a upstream.
dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
fix by adding the address into the node name.
Cc: stable@vger.kernel.org
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6413cbc17f89b3a160f3a6f3fad1232b1678fe40 upstream.
All SFP power supplies are connected to the system VDD33 which is 3v3/8A.
Set 3A per SFP slot to allow SFPs work which need more power than the
default 1W.
Cc: stable@vger.kernel.org
Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fcda8ceb014aafd56f10b33e0077c93b5dd45d1 upstream.
Add Critical and hot trips for emergency system shutdown and limiting
system load.
Change passive trip to active to make sure fan is activated on the
lowest trip.
Cc: stable@vger.kernel.org
Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones")
Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-4-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37f3d6108730713c411827ab4af764909f4dfc78 ]
JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is
currently used only in HS400 mode, as a device->host clock signal that
"is used only in read operation. The Data Strobe is always High-Z (not
driven by the device and pulled down by RDS) or Driven Low in write
operation, except during CRC status response." RDS is a pull-down
resistor specified in the 10K-100K ohm range. Thus per the standard, the
Data Strobe is always pulled to ground (by the eMMC and/or RDS) during
write operations.
Evidently, the eMMC host controller in the RK3588 considers an active
voltage on the eMMC-DS line during a write to be an error.
The default (i.e. hardware reset, and Rockchip BSP) behavior for the
RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result,
many RK3588 board designers do not bother adding a dedicated RDS
resistor, instead relying on the RK3588's internal bias. The current
devicetree, however, disables this bias (`pcfg_pull_none`), breaking
HS400-mode writes for boards without a dedicated RDS, but with an eMMC
chip that chooses to High-Z (instead of drive-low) the eMMC-DS line.
(The Turing RK1 is one such board.)
Fix this by changing the bias in the (common) emmc_data_strobe case to
reflect the expected hardware/BSP behavior. This is unlikely to cause
regressions elsewhere: the pull-down is only relevant for High-Z eMMCs,
and if this is redundant with a (dedicated) RDS resistor, the effective
result is only a lower resistance to ground -- where the range of
tolerance is quite high. If it does, it's better fixed in the specific
devicetrees.
Fixes: d85f8a5c798d5 ("arm64: dts: rockchip: Add rk3588 pinctrl data")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231205202900.4617-2-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04179605ab604dba32571a05cd06423afc9eca19 ]
Make sure that the wifi regulator is always on. The wifi driver itself
puts the wifi module into suspend mode. If we cut the power the driver
will crash when resuming from suspend.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: ad0de4ceb706 ("arm64: dts: freescale: add initial apalis imx8 aka quadmax module support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4cb68a5d3a1ed30ecaf1591eb901523faa13496 ]
"nic_media" clock should be enabled when power on/off mediamix, otherwise
power on/off will fail. Because "media_axi_root" clock is the parent of
"nic_media" clock, so replace "media_axi_clock" clock with "nic_media"
clock in mediamix node.
Link: ce18e6d007
Fixes: f2d03ba997cb ("arm64: dts: imx93: reorder device nodes")
Fixes: e85d3458a804 ("arm64: dts: imx93: add src node")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c32f75d67a8c1ea94295234db7c11a29c189e6f ]
The PWM interrupt is mandatory per imx-pwm.yaml.
Add them.
This also fixes the followig schema warning:
imx8qm-apalis-v1.1-ixora-v1.2.dtb: pwm@5d000000: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'interrupts-extended' is a required property
from schema $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: d863a2f4f475 ("arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 209043cf092d7b0d4739921b3f11d6d0b451eabf ]
The i.MX8MP and i.MX8MQ devices both use the same DWC3 controller and
are both affected by a known issue with the controller due to specific
behaviour when park mode is enabled in SuperSpeed host mode operation.
Under heavy USB traffic from multiple endpoints the controller will
sometimes incorrectly process transactions such that some transactions
are lost, or the controller may hang when processing transactions. When
the controller hangs it does not recover.
This issue is documented partially within the linux-imx vendor kernel
which references a Synopsys STAR number 9001415732 in commits [1] and
additional details in [2]. Those commits provide some additional
controller internal implementation specifics around the incorrect
behaviour of the SuperSpeed host controller operation when park mode is
enabled.
The summary of this issue is that the host controller can incorrectly
enter/exit park mode such that part of the controller is in a state
which behaves as if in park mode even though it is not. In this state
the controller incorrectly calculates the number of TRBs available which
results in incorrect access of the internal caches causing the overwrite
of pending requests in the cache which should have been processed but
are ignored. This can cause the controller to drop the requests or hang
waiting for the pending state of the dropped requests.
The workaround for this issue is to disable park mode for SuperSpeed
operation of the controller through the GUCTL1[17] bit. This is already
available as a quirk for the DWC3 controller and can be enabled via the
'snps,parkmode-disable-ss-quirk' device tree property.
It is possible to replicate this failure on an i.MX8MP EVK with a USB
Hub connecting 4 SuperSpeed USB flash drives. Performing continuous
small read operations (dd if=/dev/sd... of=/dev/null bs=16) on the block
devices will result in device errors initially and will eventually
result in the controller hanging.
[13240.896936] xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 4 ep 2 with no TDs queued?
[13240.990708] usb 2-1.3: reset SuperSpeed USB device number 5 using xhci-hcd
[13241.015582] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[13241.025198] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13241.032949] I/O error, dev sdc, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 25 prio class 2
[13272.150710] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci-hcd
[13272.175469] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[13272.185365] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13272.193385] I/O error, dev sdb, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
[13434.846556] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command
[13434.854592] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[13434.862553] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[1] 97a5349d93
[2] b4b5cbc5a1
Fixes: fb8587a2c165 ("arm64: dtsi: imx8mp: add usb nodes")
Fixes: ad37549cb5dc ("arm64: dts: imx8mq: add USB nodes")
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bfba37b3d90d6d2d499d5b0dfe99c05c38b1b54 ]
LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.
Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35938c18291b5da7422b2fac6dac0af11aa8d0d7 ]
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to. Also add missing clocks to the
related power-domain.
Fixes: cbd7214402ec ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b6240d697a96eaa45a2a5503a274ebb4f162fa3 ]
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to.
Fixes: 17408c9b119d ("arm64: dts: rockchip: Add vdec support for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acfa60dbe03802d6afd28401aa47801270e82021 ]
When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the
kernel command-line (rather than "rodata=full") should turn off the
"full" behaviour, leaving writable linear aliases of read-only kernel
memory. Unfortunately, the option has no effect in this situation and
the only way to disable the "rodata=full" behaviour is to disable rodata
protection entirely by passing "rodata=off".
Fix this by parsing the "on" and "off" options in the arch code,
additionally enforcing that 'rodata_full' cannot be set without also
setting 'rodata_enabled', allowing us to simplify a couple of checks
in the process.
Fixes: 2e8cff0a0eee ("arm64: fix rodata=full")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5fe8508e2bc8eb4208b0434b6c1ca306c1519ade upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ9574.
Cc: stable@vger.kernel.org
Fixes: 46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a781d04e580705d36f7db07f5c80e748100b69d upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ8074.
Cc: stable@vger.kernel.org
Fixes: 42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d08afd80158399a081b478a19902364e3dd0f84c upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ5332.
Cc: stable@vger.kernel.org
Fixes: d56dd7f935e1 ("arm64: dts: qcom: ipq5332: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d97b111e1e184b0c8656137033ed64f2cf21e4 upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ6018.
Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d35686444fc80950c731e33a2f6ad4a55822be9b upstream.
The counting of module PLTs has been broken when CONFIG_RANDOMIZE_BASE=n
since commit:
3e35d303ab7d22c4 ("arm64: module: rework module VA range selection")
Prior to that commit, when CONFIG_RANDOMIZE_BASE=n, the kernel image and
all modules were placed within a 128M region, and no PLTs were necessary
for B or BL. Hence count_plts() and partition_branch_plt_relas() skipped
handling B and BL when CONFIG_RANDOMIZE_BASE=n.
After that commit, modules can be placed anywhere within a 2G window
regardless of CONFIG_RANDOMIZE_BASE, and hence PLTs may be necessary for
B and BL even when CONFIG_RANDOMIZE_BASE=n. Unfortunately that commit
failed to update count_plts() and partition_branch_plt_relas()
accordingly.
Due to this, module_emit_plt_entry() may fail if an insufficient number
of PLT entries have been reserved, resulting in modules failing to load
with -ENOEXEC.
Fix this by counting PLTs regardless of CONFIG_RANDOMIZE_BASE in
count_plts() and partition_branch_plt_relas().
Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org> # 6.5.x
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231024010954.6768-1-quic_aiquny@quicinc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 146a15b873353f8ac28dc281c139ff611a3c4848 upstream.
Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.
This went unnoticed until commit:
34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD")
Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.
After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.
| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp : ffffd014173d3ad0
| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0xec/0x108
| show_stack+0x18/0x2c
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| panic+0x13c/0x340
| el1t_64_irq_handler+0x0/0x1c
| el1_abort+0x0/0x5c
| el1h_64_sync+0x64/0x68
| __pi_strcmp+0x1c/0x150
| unflatten_dt_nodes+0x1e8/0x2d8
| __unflatten_device_tree+0x5c/0x15c
| unflatten_device_tree+0x38/0x50
| setup_arch+0x164/0x1e0
| start_kernel+0x64/0x38c
| __primary_switched+0xbc/0xc4
Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: 1379b15099
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b39d5016456871a88f5cd141914a5043591b46f3 ]
Wrap the usb controllers in an intermediate simple-bus and use it to
constrain the dma address size of these usb controllers to the 40b
that they generate toward the interconnect. This is required because
the SoC uses 48b address sizes and this mismatch would lead to smmu
context faults [1] because the usb generates 40b addresses while the
smmu page tables are populated with 48b wide addresses.
[1]
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002000010
xhci-hcd xhci-hcd.0.auto: irq 108, io mem 0x03100000
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xffffffb000, fsynr=0x0, cbfrsynra=0xc01, cb=3
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 403edfa436286b21f5ffe6856ae5b36396e8966c ]
The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.
Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.
Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b80988eb78d6423249ab530bfbc6b238790a26 ]
The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).
Reported-by: Shubhi Garg <shgarg@nvidia.com>
Fixes: 28d860ed02c2 ("arm64: tegra: Enable native timers on Tegra234")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57ea99ba176913c325fc8324a24a1b5e8a6cf520 ]
The QSPI device used on Jetson Orin NX and Nano modules (p3767) is
the same as Jetson AGX Orin (p3701) and should have a maximum speed of
102 MHz.
Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6b7a1d11d0fa6333078141251908f48042016e1 ]
The SD card detect pin is active-low on all Orin Nano and NX SKUs that
have an SD card slot.
Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db1925454a2e7cadcac8756442ca7c3198332336 ]
Per the DT bindings, the micfil node should have a sound-dai-cells
entry.
Fixes: cca69ef6eba5 ("arm64: dts: imx8mn: Add support for micfil")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e6cc2b8bb7d67733f4a47720787eff1ce2666f2 ]
Per the DT bindings, the micfil node should have a sound-dai-cells
entry.
Fixes: 3bd0788c43d9 ("arm64: dts: imx8mm: Add support for micfil")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ce9a2c121e3ab354cf66aeecd3ed0758f3c5067 ]
The SAI2_TXC pin is left unconnected per the imx8mp-debix-model-a
schematics:
https://debix.io/Uploads/Temp/file/20230331/DEBIX%20Model%20A%20Schematics.pdf
Also, the RTS5411E USB hub chip does not have a reset pin.
Remove this pin description to properly describe the hardware.
This also fixes the following schema warning:
hub@1: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#
Fixes: 0253e1cb6300 ("arm64: dts: imx8mp-debix: add USB host support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d33cd614d89b0ec024d25ec45acf4632211b5a7 ]
The first compatible entry for the jpegenc should be 'nxp,imx8qm-jpgenc'.
Change it accordingly to fix the following schema warning:
imx8qm-apalis-eval.dtb: jpegenc@58450000: compatible: 'oneOf' conditional failed, one must be fixed:
'nxp,imx8qm-jpgdec' is not one of ['nxp,imx8qxp-jpgdec', 'nxp,imx8qxp-jpgenc']
'nxp,imx8qm-jpgenc' was expected
'nxp,imx8qxp-jpgdec' was expected
Fixes: 5bb279171afc ("arm64: dts: imx8: Add jpeg encoder/decoder nodes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63e5aa69b821472a3203a29e17c025329c1b151f ]
The TLV320AIC3106 audio codec is interfaced on the i2c-1 bus. With the
default rate of 400Khz the i2c register writes fail to sync:
[ 36.026387] tlv320aic3x 1-001b: Unable to sync registers 0x16-0x16. -110
[ 38.101130] omap_i2c 20010000.i2c: controller timed out
Dropping the rate to 100Khz fixes the issue.
Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231003-mcasp_am62a-v3-3-2b631ff319ca@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 664e2852aa9142193c2e241327631f032b966742 ]
Keep the DPI to MIPI-DSI bridge disabled in the SoM dtsi file.
The display chain is not wholly described in the device tree file, on
Verdin product family the displays are additional accessories that are
configured/enabled using DT overlays.
With this enabled we have issues when a display is enabled on
TIDSS port1 (LVDS) and port0 (DSI) is not used.
Fixes: 9e77200356ba ("arm64: dts: ti: verdin-am62: Add DSI display support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230922123003.25002-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35be6ac964450687ab39b846d65ee1cb2a352280 ]
Specify the base dtb file k3-j721s2-common-proc-board.dtb on which the
k3-j721s2-evm-gesi-exp-board.dtbo overlay has to be applied. Name the
resulting dtb as k3-j721s2-evm.dtb.
Fixes: cac04e27f093 ("arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230912043308.20629-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33e9032a1875bb1aee3c68a4540f5a577ff44130 ]
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.
apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
from schema display/bridge/adi,adv7533.yaml
Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
