IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3d501dd326fb1c73f1b8206d4c6e1d7b15c07e27 ]
This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.
ACK seq validation is currently following RFC 5961 5.2 guidelines:
The ACK value is considered acceptable only if
it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
SND.NXT). All incoming segments whose ACK value doesn't satisfy the
above condition MUST be discarded and an ACK sent back. It needs to
be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK
acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
ACK, drop the segment, and return". The "ignored" above implies that
the processing of the incoming data segment continues, which means
the ACK value is treated as acceptable. This mitigation makes the
ACK check more stringent since any ACK < SND.UNA wouldn't be
accepted, instead only ACKs that are in the range ((SND.UNA -
MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.
This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.
This greatly improves TCP security at a little cost.
I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.
tp->bytes_acked was added in linux-4.2
Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0
// ---------------- Handshake ------------------- //
// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.
+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4
// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997
// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535
// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80d875cfc9d3711a029f234ef7d680db79e8fa4b ]
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.
This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 ]
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 871019b22d1bcc9fab2d1feba1b9a564acbb6e99 ]
We've started to see the following kernel traces:
WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0
Call Trace:
<IRQ>
__bpf_skc_lookup+0x10d/0x120
bpf_sk_lookup+0x48/0xd0
bpf_sk_lookup_tcp+0x19/0x20
bpf_prog_<redacted>+0x37c/0x16a3
cls_bpf_classify+0x205/0x2e0
tcf_classify+0x92/0x160
__netif_receive_skb_core+0xe52/0xf10
__netif_receive_skb_list_core+0x96/0x2b0
napi_complete_done+0x7b5/0xb70
<redacted>_poll+0x94/0xb0
net_rx_action+0x163/0x1d70
__do_softirq+0xdc/0x32e
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x36/0x50
do_softirq+0x44/0x70
__inet_hash can race with lockless (rcu) readers on the other cpus:
__inet_hash
__sk_nulls_add_node_rcu
<- (bpf triggers here)
sock_set_flag(SOCK_RCU_FREE)
Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.
More details from Eric regarding SOCK_RCU_FREE timeline:
Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.
Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb44ad4e635132754bfbcb18103f1dcb7058aedd ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73ed8e03388d16c12fc577e5c700b58a29045a15 ]
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a135798e6e200ecb2f864cecca6d257ba278370c ]
tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081480014a64a69d901f8ef1ffdd56d6085cf87e ]
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.
Fixes: 9ad7c049f0f7 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc3a153222805d65f821e10f4f78b6afce06f86 ]
When removing an item from RCU protected list, we must prevent
store-tearing, using rcu_assign_pointer() or WRITE_ONCE().
Fixes: 04f721c671656 ("tcp_metrics: Rewrite tcp_metrics_flush_all")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e326578a21414738de45f77badd332fb00bd0f58 ]
For passive TCP Fast Open sockets that had SYN/ACK timeout and did not
send more data in SYN_RECV, upon receiving the final ACK in 3WHS, the
congestion state may awkwardly stay in CA_Loss mode unless the CA state
was undone due to TCP timestamp checks. However, if
tcp_rcv_synrecv_state_fastopen() decides not to undo, then we should
enter CA_Open, because at that point we have received an ACK covering
the retransmitted SYNACKs. Currently, the icsk_ca_state is only set to
CA_Open after we receive an ACK for a data-packet. This is because
tcp_ack does not call tcp_fastretrans_alert (and tcp_process_loss) if
!prior_packets
Note that tcp_process_loss() calls tcp_try_undo_recovery(), so having
tcp_rcv_synrecv_state_fastopen() decide that if we're in CA_Loss we
should call tcp_try_undo_recovery() is consistent with that, and
low risk.
Fixes: dad8cea7add9 ("tcp: fix TFO SYNACK undo to avoid double-timestamp-undo")
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 882af43a0fc37e26d85fb0df0c9edd3bed928de4 ]
udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.
Move udp->pcflag to udp->udp_flags for atomicity,
and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen.
Fixes: ba4e58eca8aa ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 729549aa350c56a777bb342941ed4d69b6585769 ]
This flag is set but never read, we can remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 882af43a0fc3 ("udplite: fix various data-races")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5f52f0884a595ff99ab1a608643fe4025fca2d5 ]
These are read locklessly, move them to udp_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 70a36f571362 ("udp: annotate data-races around udp->encap_type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d5a12eb91224d707f8691dccb40a5719fe5466d ]
UDP_ENCAP_ESPINUDP_NON_IKE setsockopt() writes over up->encap_rcv
while other cpus read it.
Fixes: 067b207b281d ("[UDP]: Cleanup UDP encapsulation code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1dc0615c6b08ef36414f08c011965b8fb56198b ]
syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcbc1b1de884647aa0318bf74eb7f293d72a1e40 ]
syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0002127cd746fcaa182ad3386ef6931c37f3bda ]
syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp->udp_flags
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81b36803ac139827538ac5ce4028e750a3c53f53 ]
According to syzbot, it is time to use proper atomic flags
for various UDP flags.
Add udp_flags field, and convert udp->corkflag to first
bit in it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: a0002127cd74 ("udp: move udp->no_check6_tx to udp->udp_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Under memory stress conditions, tcp_sendmsg_locked()
might call sk_stream_wait_memory(), thus releasing the socket lock.
If a fresh skb has been allocated prior to this,
we should not leave it in the write queue otherwise
tcp_write_xmit() could panic.
This apparently does not happen often, but a future change
in __sk_mem_raise_allocated() that Shakeel and others are
considering would increase chances of being hurt.
Under discussion is to remove this controversial part:
/* Fail only if socket is _under_ its sndbuf.
* In this case we cannot block, so that we have to fail.
*/
if (sk->sk_wmem_queued + size >= sk->sk_sndbuf) {
/* Force charge with __GFP_NOFAIL */
if (memcg_charge && !charged) {
mem_cgroup_charge_skmem(sk->sk_memcg, amt,
gfp_memcg_charge() | __GFP_NOFAIL);
}
return 1;
}
Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20231019112457.1190114-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.
Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.
Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().
Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.
Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.
Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 75eefc6c59fd ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe14f ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b015 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
Many thanks to Stefan for his invaluable help !
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yHtO
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-10-17
1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
From Dong Chenchen.
2) Fix data-races in the xfrm interfaces dev->stats fields.
From Eric Dumazet.
3) Fix a data-race in xfrm_gen_index.
From Eric Dumazet.
4) Fix an inet6_dev refcount underflow.
From Zhang Changzhong.
5) Check the return value of pskb_trim in esp_remove_trailer
for esp4 and esp6. From Ma Ke.
6) Fix a data-race in xfrm_lookup_with_ifid.
From Eric Dumazet.
* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix a data-race in xfrm_lookup_with_ifid()
net: ipv4: fix return value check in esp_remove_trailer
net: ipv6: fix return value check in esp_remove_trailer
xfrm6: fix inet6_dev refcount underflow problem
xfrm: fix a data-race in xfrm_gen_index()
xfrm: interface: use DEV_STATS_INC()
net: xfrm: skip policies marked as dead while reinserting policies
====================
Link: https://lore.kernel.org/r/20231017083723.1364940-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a warning [0] introduced by commit c48ef9c4aed3 ("tcp: Fix
bind() regression for v4-mapped-v6 non-wildcard address.").
After the cited commit, a v4 socket's address matches the corresponding
v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa.
During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses
bhash and conflicts properly without checking bhash2 so that we need not
check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in
inet_bind2_bucket_match_addr(). However, the repro shows that we need
to check that in a no-conflict case.
The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls
listen() for the first socket:
from socket import *
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
s1.bind(('127.0.0.1', 0))
s2 = socket(AF_INET6)
s2.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
s2.bind(('::ffff:127.0.0.1', s1.getsockname()[1]))
s1.listen()
The second socket should belong to the first socket's tb2, but the second
bind() creates another tb2 bucket because inet_bind2_bucket_find() returns
NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the
corresponding v4 address tb2.
bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X)
Then, listen() for the first socket calls inet_csk_get_port(), where the
v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered.
To avoid that, we need to check if v4-mapped-v6 sk address matches with
the corresponding v4 address tb2 in inet_bind2_bucket_match().
The same checks are needed in inet_bind2_bucket_addr_match() too, so we
can move all checks there and call it from inet_bind2_bucket_match().
Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr
and not of sockets in the bucket. This could be refactored later by
defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending
::ffff: when creating v4 tb2.
[0]:
WARNING: CPU: 0 PID: 5049 at net/ipv4/inet_connection_sock.c:587 inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Modules linked in:
CPU: 0 PID: 5049 Comm: syz-executor288 Not tainted 6.6.0-rc2-syzkaller-00018-g2cf0f7156238 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
RIP: 0010:inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Code: 7c 24 08 e8 4c b6 8a 01 31 d2 be 88 01 00 00 48 c7 c7 e0 94 ae 8b e8 59 2e a3 f8 2e 2e 2e 31 c0 e9 04 fe ff ff e8 ca 88 d0 f8 <0f> 0b e9 0f f9 ff ff e8 be 88 d0 f8 49 8d 7e 48 e8 65 ca 5a 00 31
RSP: 0018:ffffc90003abfbf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888026429100 RCX: 0000000000000000
RDX: ffff88807edcbb80 RSI: ffffffff88b73d66 RDI: ffff888026c49f38
RBP: ffff888026c49f30 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff9260f200
R13: ffff888026c49880 R14: 0000000000000000 R15: ffff888026429100
FS: 00005555557d5380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000025754000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
inet_csk_listen_start+0x155/0x360 net/ipv4/inet_connection_sock.c:1256
__inet_listen_sk+0x1b8/0x5c0 net/ipv4/af_inet.c:217
inet_listen+0x93/0xd0 net/ipv4/af_inet.c:239
__sys_listen+0x194/0x270 net/socket.c:1866
__do_sys_listen net/socket.c:1875 [inline]
__se_sys_listen net/socket.c:1873 [inline]
__x64_sys_listen+0x53/0x80 net/socket.c:1873
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f3a5bce3af9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc1a1c79e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a5bce3af9
RDX: 00007f3a5bce3af9 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f3a5bd565f0 R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000001
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK>
Fixes: c48ef9c4aed3 ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.")
Reported-by: syzbot+71e724675ba3958edb31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71e724675ba3958edb31
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010013814.70571-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor
which is a union with the destructor. We need to clean that
TCP-iness up before freeing.
Fixes: 736013292e3c ("tcp: let tcp_mtu_probe() build headless packets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit fixes poor delayed ACK behavior that can cause poor TCP
latency in a particular boundary condition: when an application makes
a TCP socket write that is an exact multiple of the MSS size.
The problem is that there is painful boundary discontinuity in the
current delayed ACK behavior. With the current delayed ACK behavior,
we have:
(1) If an app reads data when > 1*MSS is unacknowledged, then
tcp_cleanup_rbuf() ACKs immediately because of:
tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss ||
(2) If an app reads all received data, and the packets were < 1*MSS,
and either (a) the app is not ping-pong or (b) we received two
packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause
of:
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) ||
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) &&
!inet_csk_in_pingpong_mode(sk))) &&
(3) *However*: if an app reads exactly 1*MSS of data,
tcp_cleanup_rbuf() does not send an immediate ACK. This is true
even if the app is not ping-pong and the 1*MSS of data had the PSH
bit set, suggesting the sending application completed an
application write.
Thus if the app is not ping-pong, we have this painful case where
>1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a
write whose last skb is an exact multiple of 1*MSS can get a 40ms
delayed ACK. This means that any app that transfers data in one
direction and takes care to align write size or packet size with MSS
can suffer this problem. With receive zero copy making 4KB MSS values
more common, it is becoming more common to have application writes
naturally align with MSS, and more applications are likely to
encounter this delayed ACK problem.
The fix in this commit is to refine the delayed ACK heuristics with a
simple check: immediately ACK a received 1*MSS skb with PSH bit set if
the app reads all data. Why? If an skb has a len of exactly 1*MSS and
has the PSH bit set then it is likely the end of an application
write. So more data may not be arriving soon, and yet the data sender
may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we
set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send
an ACK immediately if the app reads all of the data and is not
ping-pong. Note that this logic is also executed for the case where
len > MSS, but in that case this logic does not matter (and does not
hurt) because tcp_cleanup_rbuf() will always ACK immediately if the
app reads data and there is more than an MSS of unACKed data.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Guo <guoxin0309@gmail.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.
The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.
When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.
And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.
The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.
Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to a small omission, the offload_failed flag is missing from ipv4
fibmatch results. Make sure it is set correctly.
The issue can be witnessed using the following commands:
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add dummy1 up type dummy
ip route add 192.0.2.0/24 dev dummy1
echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload
ip route add 198.51.100.0/24 dev dummy1
ip route
# 192.168.15.0/24 has rt_trap
# 198.51.100.0/24 has rt_offload_failed
ip route get 192.168.15.1 fibmatch
# Result has rt_trap
ip route get 198.51.100.1 fibmatch
# Result differs from the route shown by `ip route`, it is missing
# rt_offload_failed
ip link del dev dummy1
echo 1 > /sys/bus/netdevsim/del_device
Fixes: 36c5100e859d ("IPv4: Add "offload failed" indication to routes")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI
g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b
BkCQknVbFTSw/8l8pzUW123Fb46wUAQ=
=E3hd
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit 7c6bb7d2faaf
("net/ipv6: Add knob to skip DELROUTE message on device down") introduced
a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send
the route delete notify blindly in fib_table_flush().
To fix this issue, let's add a new flag in "struct fib_info" to track the
deleted prefer source address routes, and only send notify for them.
After update:
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When data is peek'd off the receive queue we shouldn't considered it
copied from tcp_sock side. When we increment copied_seq this will confuse
tcp_data_ready() because copied_seq can be arbitrarily increased. From
application side it results in poll() operations not waking up when
expected.
Notice tcp stack without BPF recvmsg programs also does not increment
copied_seq.
We broke this when we moved copied_seq into recvmsg to only update when
actual copy was happening. But, it wasn't working correctly either before
because the tcp_data_ready() tried to use the copied_seq value to see
if data was read by user yet. See fixes tags.
Fixes: e5c6de5fa0258 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-3-john.fastabend@gmail.com
Before fix e5c6de5fa0258 tcp_read_skb() would increment the tp->copied-seq
value. This (as described in the commit) would cause an error for apps
because once that is incremented the application might believe there is no
data to be read. Then some apps would stall or abort believing no data is
available.
However, the fix is incomplete because it introduces another issue in
the skb dequeue. The loop does tcp_recv_skb() in a while loop to consume
as many skbs as possible. The problem is the call is ...
tcp_recv_skb(sk, seq, &offset)
... where 'seq' is:
u32 seq = tp->copied_seq;
Now we can hit a case where we've yet incremented copied_seq from BPF side,
but then tcp_recv_skb() fails this test ...
if (offset < skb->len || (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN))
... so that instead of returning the skb we call tcp_eat_recv_skb() which
frees the skb. This is because the routine believes the SKB has been collapsed
per comment:
/* This looks weird, but this can happen if TCP collapsing
* splitted a fat GRO packet, while we released socket lock
* in skb_splice_bits()
*/
This can't happen here we've unlinked the full SKB and orphaned it. Anyways
it would confuse any BPF programs if the data were suddenly moved underneath
it.
To fix this situation do simpler operation and just skb_peek() the data
of the queue followed by the unlink. It shouldn't need to check this
condition and tcp_read_skb() reads entire skbs so there is no need to
handle the 'offset!=0' case as we would see in tcp_read_sock().
Fixes: e5c6de5fa0258 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-2-john.fastabend@gmail.com
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since bhash2 was introduced, the example below does not work as expected.
These two bind() should conflict, but the 2nd bind() now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:127.0.0.1', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find()
fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates
a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that
checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the
new tb2 does not include the 1st socket, thus the bind() finally succeeds.
In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has
the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find()
returns the 1st socket's tb2.
Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1,
the 2nd bind() fails properly for the same reason mentinoed in the previous
commit.
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrei Vagin reported bind() regression with strace logs.
If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4
socket to 127.0.0.1, the 2nd bind() should fail but now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:0.0.0.0', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is
AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the v4-mapped-v6 wildcard address.
The example above does not work after commit 5456262d2baa ("net: Fix
incorrect address comparison when searching for a bind2 bucket"), but
the blamed change is not the commit.
Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated
as 0.0.0.0, and the sequence above worked by chance. Technically, this
case has been broken since bhash2 was introduced.
Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0,
the 2nd bind() fails properly because we fall back to using bhash to
detect conflicts for the v4-mapped-v6 address.
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Andrei Vagin <avagin@google.com>
Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prep patch to make the following patches cleaner that touch
inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any().
Both functions have duplicated comparison for netns, port, and l3mdev.
Let's factorise them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes: 0ff60a45678e ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.
Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.
Fixes: 57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
