iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/ata
History
Suman Tripathi 0185b1b787 ahci_xgene: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA Host controller driver. 
APM X-Gene SoC AHCI SATA Host controller driver requires
some correction of Phy Control OOB timing for the
COMINIT/COMWAKE parameters to correctly interoperate with
different kinds of disks.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-29 10:25:58 -04:00
..
acard-ahci.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ahci_da850.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_imx.c
ata: ahci_imx: add disable for spread-spectrum
2014-07-01 17:24:40 -04:00
ahci_mvebu.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_platform.c
ahci: add support for Hisilicon sata
2014-05-14 13:07:10 -04:00
ahci_st.c
ahci: st: Make of_device_id array const
2014-07-22 11:43:17 -04:00
ahci_sunxi.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_tegra.c
ata: Add support for the Tegra124 SATA controller
2014-07-18 17:52:33 -04:00
ahci_xgene.c
ahci_xgene: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA Host controller driver.
2014-07-29 10:25:58 -04:00
ahci.c
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
ahci.h
ata: ahci_platform: Increase AHCI_MAX_CLKS to 4
2014-07-18 17:52:33 -04:00
ata_generic.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ata_piix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
Kconfig
ata: Add support for the Tegra124 SATA controller
2014-07-18 17:52:33 -04:00
libahci_platform.c
ahci: Check and set 64-bit DMA mask for platform AHCI driver
2014-06-17 15:02:35 -04:00
libahci.c
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
libata-acpi.c
ACPI and power management updates for 3.15-rc1
2014-04-01 12:48:54 -07:00
libata-core.c
libata: Blacklist queued trim for Crucial M500
2014-06-02 16:59:25 -07:00
libata-eh.c
libata, libsas: kill pm_result and related cleanup
2014-03-18 16:08:38 -04:00
libata-pmp.c
ata: enable quirk from jmicron JMB350 for JMB394
2014-01-31 07:05:44 -05:00
libata-scsi.c
ata: SATL compliance for Inquiry Product Revision
2014-05-02 10:57:47 -04:00
libata-sff.c
libata-sff: remove dead code
2014-05-04 15:01:42 -04:00
libata-transport.c
libata: Fix display of sata speed
2013-10-27 07:43:25 -04:00
libata-transport.h
…
libata-zpodd.c
libata: zpodd: eliminate odd_can_poweroff
2014-03-14 11:23:47 -04:00
libata.h
ATA / ACPI: remove power dependent device handling
2013-10-17 15:38:53 +02:00
Makefile
ata: Add support for the Tegra124 SATA controller
2014-07-18 17:52:33 -04:00
pata_acpi.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ali.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_amd.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_arasan_cf.c
pata_arasan_cf: fix ata_host_activate() failure handling
2014-04-14 13:50:03 -04:00
pata_artop.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_at32.c
ata: use dev_get_platdata()
2013-07-30 08:59:24 -04:00
pata_at91.c
pata_at91: fix ata_host_activate() failure handling
2014-04-02 13:17:31 -04:00
pata_atiixp.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_atp867x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_bf54x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd64x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd640.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5520.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5530.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5535.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5536.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cypress.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_efar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ep93xx.c
ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
2014-05-27 09:33:22 -04:00
pata_hpt3x2n.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt3x3.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_hpt37x.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt366.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_icside.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_imx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_isapnp.c
pata_isapnp: Don't use invalid I/O ports
2013-10-07 15:17:32 -04:00
pata_it821x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_it8213.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
DMA-API: others: use dma_set_coherent_mask()
2013-10-31 14:49:07 +00:00
pata_jmicron.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_legacy.c
pata_legacy: Remove dead code
2014-03-11 08:30:53 -04:00
pata_macio.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_marvell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpc52xx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_netcell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ninja32.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87410.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87415.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_octeon_cf.c
pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-04-14 13:33:28 -04:00
pata_of_platform.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_oldpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_opti.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_optidma.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_palmld.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_pcmcia.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_pdc2027x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_piccolo.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_platform.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pxa.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_radisys.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_rdc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rz1000.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_samsung_cf.c
ata: pata_samsung_cf: removes s5pc100 related ata codes
2014-06-30 10:48:08 -04:00
pata_sc1200.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_scc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sch.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_serverworks.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sil680.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sl82c105.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_triflex.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pdc_adma.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_fsl.c
ata: Use dma_zalloc_coherent
2014-06-17 10:23:26 -04:00
sata_highbank.c
ata: sata_highbank: remove superfluous cast
2014-03-26 11:42:01 -04:00
sata_inic162x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_mv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_nv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_promise.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_promise.h
…
sata_qstor.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_rcar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil24.c
sata_sil24: Identify which card suffered IRQ status error
2014-07-22 10:08:31 -04:00
sata_sil.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_svw.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_sx4.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_uli.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_vsc.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sis.h
…