iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0195c00244
linux/arch/arm/mach-pxa/magician.c
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00

787 lines
18 KiB
C
Raw Blame History

/*
* Support for HTC Magician PDA phones:
* i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
* and T-Mobile MDA Compact.
*
* Copyright (c) 2006-2007 Philipp Zabel
*
* Based on hx4700.c, spitz.c and others.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-egpio.h>
#include <linux/mfd/htc-pasic3.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/system_info.h>
#include <mach/pxa27x.h>
#include <mach/magician.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
#include "devices.h"
#include "generic.h"
static unsigned long magician_pin_config[] __initdata = {
/* SDRAM and Static Memory I/O Signals */
GPIO20_nSDCS_2,
GPIO21_nSDCS_3,
GPIO15_nCS_1,
GPIO78_nCS_2, /* PASIC3 */
GPIO79_nCS_3, /* EGPIO CPLD */
GPIO80_nCS_4,
GPIO33_nCS_5,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* PWM 0 */
GPIO16_PWM0_OUT,
/* I2S */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
/* SSP 1 */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
/* SSP 2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
/* QCI */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
GPIO51_CIF_DD_2,
GPIO52_CIF_DD_4,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO55_CIF_DD_1,
GPIO81_CIF_DD_0,
GPIO82_CIF_DD_5,
GPIO84_CIF_FV,
GPIO85_CIF_LV,
/* Magician specific input GPIOs */
GPIO9_GPIO, /* unknown */
GPIO10_GPIO, /* GSM_IRQ */
GPIO13_GPIO, /* CPLD_IRQ */
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
/*
* IRDA
*/
static struct pxaficp_platform_data magician_ficp_info = {
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
* GPIO Keys
*/
#define INIT_KEY(_code, _gpio, _desc) \
{ \
.code = KEY_##_code, \
.gpio = _gpio, \
.desc = _desc, \
.type = EV_KEY, \
.wakeup = 1, \
}
static struct gpio_keys_button magician_button_table[] = {
INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
};
static struct gpio_keys_platform_data gpio_keys_data = {
.buttons = magician_button_table,
.nbuttons = ARRAY_SIZE(magician_button_table),
};
static struct platform_device gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &gpio_keys_data,
},
.id = -1,
};
/*
* EGPIO (Xilinx CPLD)
*
* 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
*/
static struct resource egpio_resources[] = {
[0] = {
.start = PXA_CS3_PHYS,
.end = PXA_CS3_PHYS + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
.end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
.flags = IORESOURCE_IRQ,
},
};
static struct htc_egpio_chip egpio_chips[] = {
[0] = {
.reg_start = 0,
.gpio_base = MAGICIAN_EGPIO(0, 0),
.num_gpios = 24,
.direction = HTC_EGPIO_OUTPUT,
.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
},
[1] = {
.reg_start = 4,
.gpio_base = MAGICIAN_EGPIO(4, 0),
.num_gpios = 24,
.direction = HTC_EGPIO_INPUT,
},
};
static struct htc_egpio_platform_data egpio_info = {
.reg_width = 8,
.bus_width = 32,
.irq_base = IRQ_BOARD_START,
.num_irqs = 4,
.ack_register = 3,
.chip = egpio_chips,
.num_chips = ARRAY_SIZE(egpio_chips),
};
static struct platform_device egpio = {
.name = "htc-egpio",
.id = -1,
.resource = egpio_resources,
.num_resources = ARRAY_SIZE(egpio_resources),
.dev = {
.platform_data = &egpio_info,
},
};
/*
* LCD - Toppoly TD028STEB1 or Samsung LTP280QV
*/
static struct pxafb_mode_info toppoly_modes[] = {
{
.pixclock = 96153,
.bpp = 16,
.xres = 240,
.yres = 320,
.hsync_len = 11,
.vsync_len = 3,
.left_margin = 19,
.upper_margin = 2,
.right_margin = 10,
.lower_margin = 2,
.sync = 0,
},
};
static struct pxafb_mode_info samsung_modes[] = {
{
.pixclock = 96153,
.bpp = 16,
.xres = 240,
.yres = 320,
.hsync_len = 8,
.vsync_len = 4,
.left_margin = 9,
.upper_margin = 4,
.right_margin = 9,
.lower_margin = 4,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
{
pr_debug("Toppoly LCD power\n");
if (on) {
pr_debug("on\n");
gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
udelay(2000);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
udelay(2000);
/* FIXME: enable LCDC here */
udelay(2000);
gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
udelay(2000);
gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
} else {
pr_debug("off\n");
msleep(15);
gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
udelay(500);
gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
udelay(1000);
gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
{
pr_debug("Samsung LCD power\n");
if (on) {
pr_debug("on\n");
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
mdelay(10);
gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
mdelay(10);
gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
mdelay(30);
gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
mdelay(10);
} else {
pr_debug("off\n");
mdelay(10);
gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
mdelay(30);
gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
mdelay(10);
gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
mdelay(10);
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
static struct pxafb_mach_info toppoly_info = {
.modes = toppoly_modes,
.num_modes = 1,
.fixed_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
.pxafb_lcd_power = toppoly_lcd_power,
};
static struct pxafb_mach_info samsung_info = {
.modes = samsung_modes,
.num_modes = 1,
.fixed_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
LCD_ALTERNATE_MAPPING,
.pxafb_lcd_power = samsung_lcd_power,
};
/*
* Backlight
*/
static struct gpio magician_bl_gpios[] = {
{ EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
};
static int magician_backlight_init(struct device *dev)
{
return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
static int magician_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
return brightness - 72;
} else {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
return brightness;
}
}
static void magician_backlight_exit(struct device *dev)
{
gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = 0,
.max_brightness = 272,
.dft_brightness = 100,
.pwm_period_ns = 30923,
.init = magician_backlight_init,
.notify = magician_backlight_notify,
.exit = magician_backlight_exit,
};
static struct platform_device backlight = {
.name = "pwm-backlight",
.id = -1,
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &backlight_data,
},
};
/*
* LEDs
*/
static struct gpio_led gpio_leds[] = {
{
.name = "magician::vibra",
.default_trigger = "none",
.gpio = GPIO22_MAGICIAN_VIBRA_EN,
},
{
.name = "magician::phone_bl",
.default_trigger = "backlight",
.gpio = GPIO103_MAGICIAN_LED_KP,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static struct pasic3_led pasic3_leds[] = {
{
.led = {
.name = "magician:red",
.default_trigger = "ds2760-battery.0-charging",
},
.hw_num = 0,
.bit2 = PASIC3_BIT2_LED0,
.mask = PASIC3_MASK_LED0,
},
{
.led = {
.name = "magician:green",
.default_trigger = "ds2760-battery.0-charging-or-full",
},
.hw_num = 1,
.bit2 = PASIC3_BIT2_LED1,
.mask = PASIC3_MASK_LED1,
},
{
.led = {
.name = "magician:blue",
.default_trigger = "bluetooth",
},
.hw_num = 2,
.bit2 = PASIC3_BIT2_LED2,
.mask = PASIC3_MASK_LED2,
},
};
static struct pasic3_leds_machinfo pasic3_leds_info = {
.num_leds = ARRAY_SIZE(pasic3_leds),
.power_gpio = EGPIO_MAGICIAN_LED_POWER,
.leds = pasic3_leds,
};
/*
* PASIC3 with DS1WM
*/
static struct resource pasic3_resources[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x1b,
.flags = IORESOURCE_MEM,
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
.start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
.end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct pasic3_platform_data pasic3_platform_data = {
.led_pdata = &pasic3_leds_info,
.clock_rate = 4000000,
};
static struct platform_device pasic3 = {
.name = "pasic3",
.id = -1,
.num_resources = ARRAY_SIZE(pasic3_resources),
.resource = pasic3_resources,
.dev = {
.platform_data = &pasic3_platform_data,
},
};
/*
* USB "Transceiver"
*/
static struct resource gpio_vbus_resource = {
.flags = IORESOURCE_IRQ,
.start = IRQ_MAGICIAN_VBUS,
.end = IRQ_MAGICIAN_VBUS,
};
static struct gpio_vbus_mach_info gpio_vbus_info = {
.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
.gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
};
static struct platform_device gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.num_resources = 1,
.resource = &gpio_vbus_resource,
.dev = {
.platform_data = &gpio_vbus_info,
},
};
/*
* External power
*/
static int power_supply_init(struct device *dev)
{
return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
}
static int magician_is_ac_online(void)
{
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = magician_is_ac_online,
.exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = {
.name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
.start = IRQ_MAGICIAN_VBUS,
.end = IRQ_MAGICIAN_VBUS,
},
[1] = {
.name = "usb",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
.start = IRQ_MAGICIAN_VBUS,
.end = IRQ_MAGICIAN_VBUS,
},
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data = &power_supply_info,
},
.resource = power_supply_resources,
.num_resources = ARRAY_SIZE(power_supply_resources),
};
/*
* Battery charger
*/
static struct regulator_consumer_supply bq24022_consumers[] = {
{
.dev = &gpio_vbus.dev,
.supply = "vbus_draw",
},
{
.dev = &power_supply.dev,
.supply = "ac_draw",
},
};
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
};
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
{ .value = 500000, .gpios = (1 << 0) },
};
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
.enable_high = 0,
.enabled_at_boot = 0,
.gpios = bq24022_gpios,
.nr_gpios = ARRAY_SIZE(bq24022_gpios),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
.type = REGULATOR_CURRENT,
.init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
.name = "gpio-regulator",
.id = -1,
.dev = {
.platform_data = &bq24022_info,
},
};
/*
* MMC/SD
*/
static int magician_mci_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
return request_irq(IRQ_MAGICIAN_SD, detect_irq,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
"mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
{
free_irq(IRQ_MAGICIAN_SD, data);
}
static struct pxamci_platform_data magician_mci_info = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = magician_mci_init,
.exit = magician_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
.gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
/*
* USB OHCI
*/
static struct pxaohci_platform_data magician_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
.power_budget = 0,
};
/*
* StrataFlash
*/
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data strataflash_data = {
.width = 4,
.set_vpp = magician_set_vpp,
};
static struct platform_device strataflash = {
.name = "physmap-flash",
.id = -1,
.resource = &strataflash_resource,
.num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
},
};
/*
* I2C
*/
static struct i2c_pxa_platform_data i2c_info = {
.fast_mode = 1,
};
/*
* Platform devices
*/
static struct platform_device *devices[] __initdata = {
&gpio_keys,
&egpio,
&backlight,
&pasic3,
&bq24022,
&gpio_vbus,
&power_supply,
&strataflash,
&leds_gpio,
};
static struct gpio magician_global_gpios[] = {
{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
};
static void __init magician_init(void)
{
void __iomem *cpld;
int lcd_select;
int err;
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
if (err)
pr_err("magician: Failed to request GPIOs: %d\n", err);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(ARRAY_AND_SIZE(devices));
pxa_set_ficp_info(&magician_ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(&i2c_info);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
if (cpld) {
u8 board_id = __raw_readb(cpld+0x14);
iounmap(cpld);
system_rev = board_id & 0x7;
lcd_select = board_id & 0x8;
pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
if (lcd_select && (system_rev < 3))
gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
}
MACHINE_START(MAGICIAN, "HTC Magician")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
.restart = pxa_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink