7576594c8e
The "enable arbiter" bit is available only for pxa3xx based platforms but it was experimentally shown that even if this bit is reserved, some Marvell platforms (64-bit) actually need it to be set. The driver always set this bit regardless of this property, which is harmless. Then this property is not needed. The "num_cs" field is always 1 and for a good reason, the old driver (pxa3xx_nand.c) could only handle one. The new driver that replaces it (marvell_nand.c) can handle more, but better use device tree for such description. As there is only one available chip select, there is no need for an array of partitions neither an array of partition numbers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
313 lines
7.4 KiB
C
313 lines
7.4 KiB
C
/*
|
|
* linux/arch/arm/mach-mmp/ttc_dkb.c
|
|
*
|
|
* Support for the Marvell PXA910-based TTC_DKB Development Platform.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/onenand.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio-pxa.h>
|
|
#include <linux/mfd/88pm860x.h>
|
|
#include <linux/platform_data/mv_usb.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include "addr-map.h"
|
|
#include "mfp-pxa910.h"
|
|
#include "pxa910.h"
|
|
#include "irqs.h"
|
|
#include "regs-usb.h"
|
|
|
|
#include "common.h"
|
|
|
|
#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
|
|
((x < 16) ? x : 15)))
|
|
#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
|
|
((x < 16) ? x : 15)))
|
|
|
|
/*
|
|
* 16 board interrupts -- MAX7312 GPIO expander
|
|
* 16 board interrupts -- PCA9575 GPIO expander
|
|
* 24 board interrupts -- 88PM860x PMIC
|
|
*/
|
|
#define TTCDKB_NR_IRQS (MMP_NR_IRQS + 16 + 16 + 24)
|
|
|
|
static unsigned long ttc_dkb_pin_config[] __initdata = {
|
|
/* UART2 */
|
|
GPIO47_UART2_RXD,
|
|
GPIO48_UART2_TXD,
|
|
|
|
/* DFI */
|
|
DF_IO0_ND_IO0,
|
|
DF_IO1_ND_IO1,
|
|
DF_IO2_ND_IO2,
|
|
DF_IO3_ND_IO3,
|
|
DF_IO4_ND_IO4,
|
|
DF_IO5_ND_IO5,
|
|
DF_IO6_ND_IO6,
|
|
DF_IO7_ND_IO7,
|
|
DF_IO8_ND_IO8,
|
|
DF_IO9_ND_IO9,
|
|
DF_IO10_ND_IO10,
|
|
DF_IO11_ND_IO11,
|
|
DF_IO12_ND_IO12,
|
|
DF_IO13_ND_IO13,
|
|
DF_IO14_ND_IO14,
|
|
DF_IO15_ND_IO15,
|
|
DF_nCS0_SM_nCS2_nCS0,
|
|
DF_ALE_SM_WEn_ND_ALE,
|
|
DF_CLE_SM_OEn_ND_CLE,
|
|
DF_WEn_DF_WEn,
|
|
DF_REn_DF_REn,
|
|
DF_RDY0_DF_RDY0,
|
|
};
|
|
|
|
static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
|
|
.irq_base = MMP_GPIO_TO_IRQ(0),
|
|
};
|
|
|
|
static struct mtd_partition ttc_dkb_onenand_partitions[] = {
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_1M,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "reserved",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "reserved",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_8M,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = (SZ_2M + SZ_1M),
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_32M + SZ_16M,
|
|
.mask_flags = 0,
|
|
}
|
|
};
|
|
|
|
static struct onenand_platform_data ttc_dkb_onenand_info = {
|
|
.parts = ttc_dkb_onenand_partitions,
|
|
.nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
|
|
};
|
|
|
|
static struct resource ttc_dkb_resource_onenand[] = {
|
|
[0] = {
|
|
.start = SMC_CS0_PHYS_BASE,
|
|
.end = SMC_CS0_PHYS_BASE + SZ_1M,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ttc_dkb_device_onenand = {
|
|
.name = "onenand-flash",
|
|
.id = -1,
|
|
.resource = ttc_dkb_resource_onenand,
|
|
.num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
|
|
.dev = {
|
|
.platform_data = &ttc_dkb_onenand_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *ttc_dkb_devices[] = {
|
|
&pxa910_device_gpio,
|
|
&pxa910_device_rtc,
|
|
&ttc_dkb_device_onenand,
|
|
};
|
|
|
|
static struct pca953x_platform_data max7312_data[] = {
|
|
{
|
|
.gpio_base = TTCDKB_GPIO_EXT0(0),
|
|
.irq_base = MMP_NR_IRQS,
|
|
},
|
|
};
|
|
|
|
static struct pm860x_platform_data ttc_dkb_pm8607_info = {
|
|
.irq_base = IRQ_BOARD_START,
|
|
};
|
|
|
|
static struct i2c_board_info ttc_dkb_i2c_info[] = {
|
|
{
|
|
.type = "88PM860x",
|
|
.addr = 0x34,
|
|
.platform_data = &ttc_dkb_pm8607_info,
|
|
.irq = IRQ_PXA910_PMIC_INT,
|
|
},
|
|
{
|
|
.type = "max7312",
|
|
.addr = 0x23,
|
|
.irq = MMP_GPIO_TO_IRQ(80),
|
|
.platform_data = &max7312_data,
|
|
},
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_USB_SUPPORT)
|
|
#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
|
|
|
|
static struct mv_usb_platform_data ttc_usb_pdata = {
|
|
.vbus = NULL,
|
|
.mode = MV_USB_MODE_OTG,
|
|
.otg_force_a_bus_req = 1,
|
|
.phy_init = pxa_usb_phy_init,
|
|
.phy_deinit = pxa_usb_phy_deinit,
|
|
.set_vbus = NULL,
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
|
|
static struct pxa3xx_nand_platform_data dkb_nand_info = {};
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_MMP_DISP)
|
|
/* path config */
|
|
#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */
|
|
#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */
|
|
/* link config */
|
|
#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/
|
|
static struct mmp_mach_path_config dkb_disp_config[] = {
|
|
[0] = {
|
|
.name = "mmp-parallel",
|
|
.overlay_num = 2,
|
|
.output_type = PATH_OUT_PARALLEL,
|
|
.path_config = CFG_IOPADMODE(0x1)
|
|
| SCLK_SOURCE_SELECT(0x1),
|
|
.link_config = CFG_DUMBMODE(0x2),
|
|
},
|
|
};
|
|
|
|
static struct mmp_mach_plat_info dkb_disp_info = {
|
|
.name = "mmp-disp",
|
|
.clk_name = "disp0",
|
|
.path_num = 1,
|
|
.paths = dkb_disp_config,
|
|
};
|
|
|
|
static struct mmp_buffer_driver_mach_info dkb_fb_info = {
|
|
.name = "mmp-fb",
|
|
.path_name = "mmp-parallel",
|
|
.overlay_id = 0,
|
|
.dmafetch_id = 1,
|
|
.default_pixfmt = PIXFMT_RGB565,
|
|
};
|
|
|
|
static void dkb_tpo_panel_power(int on)
|
|
{
|
|
int err;
|
|
u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
|
|
|
|
if (on) {
|
|
err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
|
|
if (err) {
|
|
pr_err("failed to request GPIO for TPO LCD RESET\n");
|
|
return;
|
|
}
|
|
gpio_direction_output(spi_reset, 0);
|
|
udelay(100);
|
|
gpio_set_value(spi_reset, 1);
|
|
gpio_free(spi_reset);
|
|
} else {
|
|
err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
|
|
if (err) {
|
|
pr_err("failed to request LCD RESET gpio\n");
|
|
return;
|
|
}
|
|
gpio_set_value(spi_reset, 0);
|
|
gpio_free(spi_reset);
|
|
}
|
|
}
|
|
|
|
static struct mmp_mach_panel_info dkb_tpo_panel_info = {
|
|
.name = "tpo-hvga",
|
|
.plat_path_name = "mmp-parallel",
|
|
.plat_set_onoff = dkb_tpo_panel_power,
|
|
};
|
|
|
|
static struct spi_board_info spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "tpo-hvga",
|
|
.platform_data = &dkb_tpo_panel_info,
|
|
.bus_num = 5,
|
|
}
|
|
};
|
|
|
|
static void __init add_disp(void)
|
|
{
|
|
pxa_register_device(&pxa910_device_disp,
|
|
&dkb_disp_info, sizeof(dkb_disp_info));
|
|
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
|
pxa_register_device(&pxa910_device_fb,
|
|
&dkb_fb_info, sizeof(dkb_fb_info));
|
|
pxa_register_device(&pxa910_device_panel,
|
|
&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
|
|
}
|
|
#endif
|
|
|
|
static void __init ttc_dkb_init(void)
|
|
{
|
|
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
|
|
|
|
/* on-chip devices */
|
|
pxa910_add_uart(1);
|
|
#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
|
|
pxa910_add_nand(&dkb_nand_info);
|
|
#endif
|
|
|
|
/* off-chip devices */
|
|
pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
|
|
platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
|
|
sizeof(struct pxa_gpio_platform_data));
|
|
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
|
|
|
|
#if IS_ENABLED(CONFIG_USB_MV_UDC)
|
|
pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
|
|
platform_device_register(&pxa168_device_u2o);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
|
|
pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
|
|
platform_device_register(&pxa168_device_u2oehci);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_USB_MV_OTG)
|
|
pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
|
|
platform_device_register(&pxa168_device_u2ootg);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_MMP_DISP)
|
|
add_disp();
|
|
#endif
|
|
}
|
|
|
|
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
|
|
.map_io = mmp_map_io,
|
|
.nr_irqs = TTCDKB_NR_IRQS,
|
|
.init_irq = pxa910_init_irq,
|
|
.init_time = pxa910_timer_init,
|
|
.init_machine = ttc_dkb_init,
|
|
.restart = mmp_restart,
|
|
MACHINE_END
|