020ba95dbb
The conversion table has the adc value and temperature. In fact, the adc value only has the increment or decrement mode in conversion table. Moment, we can add the sort mode to be better support the *code_to_temp* for differenr SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
784 lines
20 KiB
C
784 lines
20 KiB
C
/*
|
|
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
/**
|
|
* If the temperature over a period of time High,
|
|
* the resulting TSHUT gave CRU module,let it reset the entire chip,
|
|
* or via GPIO give PMIC.
|
|
*/
|
|
enum tshut_mode {
|
|
TSHUT_MODE_CRU = 0,
|
|
TSHUT_MODE_GPIO,
|
|
};
|
|
|
|
/**
|
|
* the system Temperature Sensors tshut(tshut) polarity
|
|
* the bit 8 is tshut polarity.
|
|
* 0: low active, 1: high active
|
|
*/
|
|
enum tshut_polarity {
|
|
TSHUT_LOW_ACTIVE = 0,
|
|
TSHUT_HIGH_ACTIVE,
|
|
};
|
|
|
|
/**
|
|
* The system has two Temperature Sensors.
|
|
* sensor0 is for CPU, and sensor1 is for GPU.
|
|
*/
|
|
enum sensor_id {
|
|
SENSOR_CPU = 0,
|
|
SENSOR_GPU,
|
|
};
|
|
|
|
/**
|
|
* The conversion table has the adc value and temperature.
|
|
* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
|
|
* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
|
|
*/
|
|
enum adc_sort_mode {
|
|
ADC_DECREMENT = 0,
|
|
ADC_INCREMENT,
|
|
};
|
|
|
|
/**
|
|
* The max sensors is two in rockchip SoCs.
|
|
* Two sensors: CPU and GPU sensor.
|
|
*/
|
|
#define SOC_MAX_SENSORS 2
|
|
|
|
struct chip_tsadc_table {
|
|
const struct tsadc_table *id;
|
|
|
|
/* the array table size*/
|
|
unsigned int length;
|
|
|
|
/* that analogic mask data */
|
|
u32 data_mask;
|
|
|
|
/* the sort mode is adc value that increment or decrement in table */
|
|
enum adc_sort_mode mode;
|
|
};
|
|
|
|
struct rockchip_tsadc_chip {
|
|
/* The sensor id of chip correspond to the ADC channel */
|
|
int chn_id[SOC_MAX_SENSORS];
|
|
int chn_num;
|
|
|
|
/* The hardware-controlled tshut property */
|
|
long tshut_temp;
|
|
enum tshut_mode tshut_mode;
|
|
enum tshut_polarity tshut_polarity;
|
|
|
|
/* Chip-wide methods */
|
|
void (*initialize)(void __iomem *reg, enum tshut_polarity p);
|
|
void (*irq_ack)(void __iomem *reg);
|
|
void (*control)(void __iomem *reg, bool on);
|
|
|
|
/* Per-sensor methods */
|
|
int (*get_temp)(struct chip_tsadc_table table,
|
|
int chn, void __iomem *reg, int *temp);
|
|
void (*set_tshut_temp)(struct chip_tsadc_table table,
|
|
int chn, void __iomem *reg, long temp);
|
|
void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
|
|
|
|
/* Per-table methods */
|
|
struct chip_tsadc_table table;
|
|
};
|
|
|
|
struct rockchip_thermal_sensor {
|
|
struct rockchip_thermal_data *thermal;
|
|
struct thermal_zone_device *tzd;
|
|
int id;
|
|
};
|
|
|
|
struct rockchip_thermal_data {
|
|
const struct rockchip_tsadc_chip *chip;
|
|
struct platform_device *pdev;
|
|
struct reset_control *reset;
|
|
|
|
struct rockchip_thermal_sensor sensors[SOC_MAX_SENSORS];
|
|
|
|
struct clk *clk;
|
|
struct clk *pclk;
|
|
|
|
void __iomem *regs;
|
|
|
|
long tshut_temp;
|
|
enum tshut_mode tshut_mode;
|
|
enum tshut_polarity tshut_polarity;
|
|
};
|
|
|
|
/* TSADC Sensor info define: */
|
|
#define TSADCV2_AUTO_CON 0x04
|
|
#define TSADCV2_INT_EN 0x08
|
|
#define TSADCV2_INT_PD 0x0c
|
|
#define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04)
|
|
#define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04)
|
|
#define TSADCV2_HIGHT_INT_DEBOUNCE 0x60
|
|
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64
|
|
#define TSADCV2_AUTO_PERIOD 0x68
|
|
#define TSADCV2_AUTO_PERIOD_HT 0x6c
|
|
|
|
#define TSADCV2_AUTO_EN BIT(0)
|
|
#define TSADCV2_AUTO_SRC_EN(chn) BIT(4 + (chn))
|
|
#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH BIT(8)
|
|
|
|
#define TSADCV2_INT_SRC_EN(chn) BIT(chn)
|
|
#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) BIT(4 + (chn))
|
|
#define TSADCV2_SHUT_2CRU_SRC_EN(chn) BIT(8 + (chn))
|
|
|
|
#define TSADCV2_INT_PD_CLEAR_MASK ~BIT(8)
|
|
|
|
#define TSADCV2_DATA_MASK 0xfff
|
|
#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4
|
|
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4
|
|
#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */
|
|
#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */
|
|
|
|
struct tsadc_table {
|
|
u32 code;
|
|
long temp;
|
|
};
|
|
|
|
static const struct tsadc_table v2_code_table[] = {
|
|
{TSADCV2_DATA_MASK, -40000},
|
|
{3800, -40000},
|
|
{3792, -35000},
|
|
{3783, -30000},
|
|
{3774, -25000},
|
|
{3765, -20000},
|
|
{3756, -15000},
|
|
{3747, -10000},
|
|
{3737, -5000},
|
|
{3728, 0},
|
|
{3718, 5000},
|
|
{3708, 10000},
|
|
{3698, 15000},
|
|
{3688, 20000},
|
|
{3678, 25000},
|
|
{3667, 30000},
|
|
{3656, 35000},
|
|
{3645, 40000},
|
|
{3634, 45000},
|
|
{3623, 50000},
|
|
{3611, 55000},
|
|
{3600, 60000},
|
|
{3588, 65000},
|
|
{3575, 70000},
|
|
{3563, 75000},
|
|
{3550, 80000},
|
|
{3537, 85000},
|
|
{3524, 90000},
|
|
{3510, 95000},
|
|
{3496, 100000},
|
|
{3482, 105000},
|
|
{3467, 110000},
|
|
{3452, 115000},
|
|
{3437, 120000},
|
|
{3421, 125000},
|
|
};
|
|
|
|
static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
|
|
long temp)
|
|
{
|
|
int high, low, mid;
|
|
|
|
low = 0;
|
|
high = table.length - 1;
|
|
mid = (high + low) / 2;
|
|
|
|
if (temp < table.id[low].temp || temp > table.id[high].temp)
|
|
return 0;
|
|
|
|
while (low <= high) {
|
|
if (temp == table.id[mid].temp)
|
|
return table.id[mid].code;
|
|
else if (temp < table.id[mid].temp)
|
|
high = mid - 1;
|
|
else
|
|
low = mid + 1;
|
|
mid = (low + high) / 2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
|
|
int *temp)
|
|
{
|
|
unsigned int low = 1;
|
|
unsigned int high = table.length - 1;
|
|
unsigned int mid = (low + high) / 2;
|
|
unsigned int num;
|
|
unsigned long denom;
|
|
|
|
WARN_ON(table.length < 2);
|
|
|
|
switch (table.mode) {
|
|
case ADC_DECREMENT:
|
|
code &= table.data_mask;
|
|
if (code < table.id[high].code)
|
|
return -EAGAIN; /* Incorrect reading */
|
|
|
|
while (low <= high) {
|
|
if (code >= table.id[mid].code &&
|
|
code < table.id[mid - 1].code)
|
|
break;
|
|
else if (code < table.id[mid].code)
|
|
low = mid + 1;
|
|
else
|
|
high = mid - 1;
|
|
|
|
mid = (low + high) / 2;
|
|
}
|
|
break;
|
|
case ADC_INCREMENT:
|
|
code &= table.data_mask;
|
|
if (code < table.id[low].code)
|
|
return -EAGAIN; /* Incorrect reading */
|
|
|
|
while (low <= high) {
|
|
if (code >= table.id[mid - 1].code &&
|
|
code < table.id[mid].code)
|
|
break;
|
|
else if (code > table.id[mid].code)
|
|
low = mid + 1;
|
|
else
|
|
high = mid - 1;
|
|
|
|
mid = (low + high) / 2;
|
|
}
|
|
break;
|
|
default:
|
|
pr_err("Invalid the conversion table\n");
|
|
}
|
|
|
|
/*
|
|
* The 5C granularity provided by the table is too much. Let's
|
|
* assume that the relationship between sensor readings and
|
|
* temperature between 2 table entries is linear and interpolate
|
|
* to produce less granular result.
|
|
*/
|
|
num = table.id[mid].temp - v2_code_table[mid - 1].temp;
|
|
num *= abs(table.id[mid - 1].code - code);
|
|
denom = abs(table.id[mid - 1].code - table.id[mid].code);
|
|
*temp = table.id[mid - 1].temp + (num / denom);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rk_tsadcv2_initialize - initialize TASDC Controller.
|
|
*
|
|
* (1) Set TSADC_V2_AUTO_PERIOD:
|
|
* Configure the interleave between every two accessing of
|
|
* TSADC in normal operation.
|
|
*
|
|
* (2) Set TSADCV2_AUTO_PERIOD_HT:
|
|
* Configure the interleave between every two accessing of
|
|
* TSADC after the temperature is higher than COM_SHUT or COM_INT.
|
|
*
|
|
* (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
|
|
* If the temperature is higher than COMP_INT or COMP_SHUT for
|
|
* "debounce" times, TSADC controller will generate interrupt or TSHUT.
|
|
*/
|
|
static void rk_tsadcv2_initialize(void __iomem *regs,
|
|
enum tshut_polarity tshut_polarity)
|
|
{
|
|
if (tshut_polarity == TSHUT_HIGH_ACTIVE)
|
|
writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
|
|
regs + TSADCV2_AUTO_CON);
|
|
else
|
|
writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
|
|
regs + TSADCV2_AUTO_CON);
|
|
|
|
writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
|
|
writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
|
|
regs + TSADCV2_HIGHT_INT_DEBOUNCE);
|
|
writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
|
|
regs + TSADCV2_AUTO_PERIOD_HT);
|
|
writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
|
|
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
|
|
}
|
|
|
|
static void rk_tsadcv2_irq_ack(void __iomem *regs)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(regs + TSADCV2_INT_PD);
|
|
writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
|
|
}
|
|
|
|
static void rk_tsadcv2_control(void __iomem *regs, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(regs + TSADCV2_AUTO_CON);
|
|
if (enable)
|
|
val |= TSADCV2_AUTO_EN;
|
|
else
|
|
val &= ~TSADCV2_AUTO_EN;
|
|
|
|
writel_relaxed(val, regs + TSADCV2_AUTO_CON);
|
|
}
|
|
|
|
static int rk_tsadcv2_get_temp(struct chip_tsadc_table table,
|
|
int chn, void __iomem *regs, int *temp)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(regs + TSADCV2_DATA(chn));
|
|
|
|
return rk_tsadcv2_code_to_temp(table, val, temp);
|
|
}
|
|
|
|
static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table,
|
|
int chn, void __iomem *regs, long temp)
|
|
{
|
|
u32 tshut_value, val;
|
|
|
|
tshut_value = rk_tsadcv2_temp_to_code(table, temp);
|
|
writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
|
|
|
|
/* TSHUT will be valid */
|
|
val = readl_relaxed(regs + TSADCV2_AUTO_CON);
|
|
writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON);
|
|
}
|
|
|
|
static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
|
|
enum tshut_mode mode)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl_relaxed(regs + TSADCV2_INT_EN);
|
|
if (mode == TSHUT_MODE_GPIO) {
|
|
val &= ~TSADCV2_SHUT_2CRU_SRC_EN(chn);
|
|
val |= TSADCV2_SHUT_2GPIO_SRC_EN(chn);
|
|
} else {
|
|
val &= ~TSADCV2_SHUT_2GPIO_SRC_EN(chn);
|
|
val |= TSADCV2_SHUT_2CRU_SRC_EN(chn);
|
|
}
|
|
|
|
writel_relaxed(val, regs + TSADCV2_INT_EN);
|
|
}
|
|
|
|
static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
|
|
.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
|
|
.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
|
|
.chn_num = 2, /* two channels for tsadc */
|
|
|
|
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
|
|
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
|
|
.tshut_temp = 95000,
|
|
|
|
.initialize = rk_tsadcv2_initialize,
|
|
.irq_ack = rk_tsadcv2_irq_ack,
|
|
.control = rk_tsadcv2_control,
|
|
.get_temp = rk_tsadcv2_get_temp,
|
|
.set_tshut_temp = rk_tsadcv2_tshut_temp,
|
|
.set_tshut_mode = rk_tsadcv2_tshut_mode,
|
|
|
|
.table = {
|
|
.id = v2_code_table,
|
|
.length = ARRAY_SIZE(v2_code_table),
|
|
.data_mask = TSADCV2_DATA_MASK,
|
|
.mode = ADC_DECREMENT,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id of_rockchip_thermal_match[] = {
|
|
{
|
|
.compatible = "rockchip,rk3288-tsadc",
|
|
.data = (void *)&rk3288_tsadc_data,
|
|
},
|
|
{ /* end */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
|
|
|
|
static void
|
|
rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
|
|
{
|
|
struct thermal_zone_device *tzd = sensor->tzd;
|
|
|
|
tzd->ops->set_mode(tzd,
|
|
on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
|
|
}
|
|
|
|
static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
|
|
{
|
|
struct rockchip_thermal_data *thermal = dev;
|
|
int i;
|
|
|
|
dev_dbg(&thermal->pdev->dev, "thermal alarm\n");
|
|
|
|
thermal->chip->irq_ack(thermal->regs);
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++)
|
|
thermal_zone_device_update(thermal->sensors[i].tzd);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
|
|
{
|
|
struct rockchip_thermal_sensor *sensor = _sensor;
|
|
struct rockchip_thermal_data *thermal = sensor->thermal;
|
|
const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
|
|
int retval;
|
|
|
|
retval = tsadc->get_temp(tsadc->table,
|
|
sensor->id, thermal->regs, out_temp);
|
|
dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n",
|
|
sensor->id, *out_temp, retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = {
|
|
.get_temp = rockchip_thermal_get_temp,
|
|
};
|
|
|
|
static int rockchip_configure_from_dt(struct device *dev,
|
|
struct device_node *np,
|
|
struct rockchip_thermal_data *thermal)
|
|
{
|
|
u32 shut_temp, tshut_mode, tshut_polarity;
|
|
|
|
if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
|
|
dev_warn(dev,
|
|
"Missing tshut temp property, using default %ld\n",
|
|
thermal->chip->tshut_temp);
|
|
thermal->tshut_temp = thermal->chip->tshut_temp;
|
|
} else {
|
|
thermal->tshut_temp = shut_temp;
|
|
}
|
|
|
|
if (thermal->tshut_temp > INT_MAX) {
|
|
dev_err(dev, "Invalid tshut temperature specified: %ld\n",
|
|
thermal->tshut_temp);
|
|
return -ERANGE;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
|
|
dev_warn(dev,
|
|
"Missing tshut mode property, using default (%s)\n",
|
|
thermal->chip->tshut_mode == TSHUT_MODE_GPIO ?
|
|
"gpio" : "cru");
|
|
thermal->tshut_mode = thermal->chip->tshut_mode;
|
|
} else {
|
|
thermal->tshut_mode = tshut_mode;
|
|
}
|
|
|
|
if (thermal->tshut_mode > 1) {
|
|
dev_err(dev, "Invalid tshut mode specified: %d\n",
|
|
thermal->tshut_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "rockchip,hw-tshut-polarity",
|
|
&tshut_polarity)) {
|
|
dev_warn(dev,
|
|
"Missing tshut-polarity property, using default (%s)\n",
|
|
thermal->chip->tshut_polarity == TSHUT_LOW_ACTIVE ?
|
|
"low" : "high");
|
|
thermal->tshut_polarity = thermal->chip->tshut_polarity;
|
|
} else {
|
|
thermal->tshut_polarity = tshut_polarity;
|
|
}
|
|
|
|
if (thermal->tshut_polarity > 1) {
|
|
dev_err(dev, "Invalid tshut-polarity specified: %d\n",
|
|
thermal->tshut_polarity);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rockchip_thermal_register_sensor(struct platform_device *pdev,
|
|
struct rockchip_thermal_data *thermal,
|
|
struct rockchip_thermal_sensor *sensor,
|
|
int id)
|
|
{
|
|
const struct rockchip_tsadc_chip *tsadc = thermal->chip;
|
|
int error;
|
|
|
|
tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
|
|
tsadc->set_tshut_temp(tsadc->table, id, thermal->regs,
|
|
thermal->tshut_temp);
|
|
|
|
sensor->thermal = thermal;
|
|
sensor->id = id;
|
|
sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
|
|
&rockchip_of_thermal_ops);
|
|
if (IS_ERR(sensor->tzd)) {
|
|
error = PTR_ERR(sensor->tzd);
|
|
dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
|
|
id, error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset TSADC Controller, reset all tsadc registers.
|
|
*/
|
|
static void rockchip_thermal_reset_controller(struct reset_control *reset)
|
|
{
|
|
reset_control_assert(reset);
|
|
usleep_range(10, 20);
|
|
reset_control_deassert(reset);
|
|
}
|
|
|
|
static int rockchip_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct rockchip_thermal_data *thermal;
|
|
const struct of_device_id *match;
|
|
struct resource *res;
|
|
int irq;
|
|
int i, j;
|
|
int error;
|
|
|
|
match = of_match_node(of_rockchip_thermal_match, np);
|
|
if (!match)
|
|
return -ENXIO;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no irq resource?\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
|
|
GFP_KERNEL);
|
|
if (!thermal)
|
|
return -ENOMEM;
|
|
|
|
thermal->pdev = pdev;
|
|
|
|
thermal->chip = (const struct rockchip_tsadc_chip *)match->data;
|
|
if (!thermal->chip)
|
|
return -EINVAL;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
thermal->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(thermal->regs))
|
|
return PTR_ERR(thermal->regs);
|
|
|
|
thermal->reset = devm_reset_control_get(&pdev->dev, "tsadc-apb");
|
|
if (IS_ERR(thermal->reset)) {
|
|
error = PTR_ERR(thermal->reset);
|
|
dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
thermal->clk = devm_clk_get(&pdev->dev, "tsadc");
|
|
if (IS_ERR(thermal->clk)) {
|
|
error = PTR_ERR(thermal->clk);
|
|
dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
|
|
if (IS_ERR(thermal->pclk)) {
|
|
error = PTR_ERR(thermal->pclk);
|
|
dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
error = clk_prepare_enable(thermal->clk);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
error = clk_prepare_enable(thermal->pclk);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to enable pclk: %d\n", error);
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
rockchip_thermal_reset_controller(thermal->reset);
|
|
|
|
error = rockchip_configure_from_dt(&pdev->dev, np, thermal);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to parse device tree data: %d\n",
|
|
error);
|
|
goto err_disable_pclk;
|
|
}
|
|
|
|
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++) {
|
|
error = rockchip_thermal_register_sensor(pdev, thermal,
|
|
&thermal->sensors[i],
|
|
thermal->chip->chn_id[i]);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register sensor[%d] : error = %d\n",
|
|
i, error);
|
|
for (j = 0; j < i; j++)
|
|
thermal_zone_of_sensor_unregister(&pdev->dev,
|
|
thermal->sensors[j].tzd);
|
|
goto err_disable_pclk;
|
|
}
|
|
}
|
|
|
|
error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
|
&rockchip_thermal_alarm_irq_thread,
|
|
IRQF_ONESHOT,
|
|
"rockchip_thermal", thermal);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"failed to request tsadc irq: %d\n", error);
|
|
goto err_unregister_sensor;
|
|
}
|
|
|
|
thermal->chip->control(thermal->regs, true);
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++)
|
|
rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
|
|
|
|
platform_set_drvdata(pdev, thermal);
|
|
|
|
return 0;
|
|
|
|
err_unregister_sensor:
|
|
while (i--)
|
|
thermal_zone_of_sensor_unregister(&pdev->dev,
|
|
thermal->sensors[i].tzd);
|
|
|
|
err_disable_pclk:
|
|
clk_disable_unprepare(thermal->pclk);
|
|
err_disable_clk:
|
|
clk_disable_unprepare(thermal->clk);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int rockchip_thermal_remove(struct platform_device *pdev)
|
|
{
|
|
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++) {
|
|
struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
|
|
|
|
rockchip_thermal_toggle_sensor(sensor, false);
|
|
thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
|
|
}
|
|
|
|
thermal->chip->control(thermal->regs, false);
|
|
|
|
clk_disable_unprepare(thermal->pclk);
|
|
clk_disable_unprepare(thermal->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++)
|
|
rockchip_thermal_toggle_sensor(&thermal->sensors[i], false);
|
|
|
|
thermal->chip->control(thermal->regs, false);
|
|
|
|
clk_disable(thermal->pclk);
|
|
clk_disable(thermal->clk);
|
|
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused rockchip_thermal_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
|
|
int i;
|
|
int error;
|
|
|
|
error = clk_enable(thermal->clk);
|
|
if (error)
|
|
return error;
|
|
|
|
error = clk_enable(thermal->pclk);
|
|
if (error)
|
|
return error;
|
|
|
|
rockchip_thermal_reset_controller(thermal->reset);
|
|
|
|
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++) {
|
|
int id = thermal->sensors[i].id;
|
|
|
|
thermal->chip->set_tshut_mode(id, thermal->regs,
|
|
thermal->tshut_mode);
|
|
thermal->chip->set_tshut_temp(thermal->chip->table,
|
|
id, thermal->regs,
|
|
thermal->tshut_temp);
|
|
}
|
|
|
|
thermal->chip->control(thermal->regs, true);
|
|
|
|
for (i = 0; i < thermal->chip->chn_num; i++)
|
|
rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
|
|
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
|
|
rockchip_thermal_suspend, rockchip_thermal_resume);
|
|
|
|
static struct platform_driver rockchip_thermal_driver = {
|
|
.driver = {
|
|
.name = "rockchip-thermal",
|
|
.pm = &rockchip_thermal_pm_ops,
|
|
.of_match_table = of_rockchip_thermal_match,
|
|
},
|
|
.probe = rockchip_thermal_probe,
|
|
.remove = rockchip_thermal_remove,
|
|
};
|
|
|
|
module_platform_driver(rockchip_thermal_driver);
|
|
|
|
MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver");
|
|
MODULE_AUTHOR("Rockchip, Inc.");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:rockchip-thermal");
|