linux/drivers/md/linear.c
NeilBrown 2604b703b6 [PATCH] md: remove personality numbering from md
md supports multiple different RAID level, each being implemented by a
'personality' (which is often in a separate module).

These personalities have fairly artificial 'numbers'.  The numbers
are use to:
 1- provide an index into an array where the various personalities
    are recorded
 2- identify the module (via an alias) which implements are particular
    personality.

Neither of these uses really justify the existence of personality numbers.
The array can be replaced by a linked list which is searched (array lookup
only happens very rarely).  Module identification can be done using an alias
based on level rather than 'personality' number.

The current 'raid5' modules support two level (4 and 5) but only one
personality.  This slight awkwardness (which was handled in the mapping from
level to personality) can be better handled by allowing raid5 to register 2
personalities.

With this change in place, the core md module does not need to have an
exhaustive list of all possible personalities, so other personalities can be
added independently.

This patch also moves the check for chunksize being non-zero into the ->run
routines for the personalities that need it, rather than having it in core-md.
 This has a side effect of allowing 'faulty' and 'linear' not to have a
chunk-size set.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:34:06 -08:00

381 lines
9.5 KiB
C

/*
linear.c : Multiple Devices driver for Linux
Copyright (C) 1994-96 Marc ZYNGIER
<zyngier@ufr-info-p7.ibp.fr> or
<maz@gloups.fdn.fr>
Linear mode management functions.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
You should have received a copy of the GNU General Public License
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/raid/md.h>
#include <linux/slab.h>
#include <linux/raid/linear.h>
#define MAJOR_NR MD_MAJOR
#define MD_DRIVER
#define MD_PERSONALITY
/*
* find which device holds a particular offset
*/
static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector)
{
dev_info_t *hash;
linear_conf_t *conf = mddev_to_conf(mddev);
sector_t block = sector >> 1;
/*
* sector_div(a,b) returns the remainer and sets a to a/b
*/
block >>= conf->preshift;
(void)sector_div(block, conf->hash_spacing);
hash = conf->hash_table[block];
while ((sector>>1) >= (hash->size + hash->offset))
hash++;
return hash;
}
/**
* linear_mergeable_bvec -- tell bio layer if two requests can be merged
* @q: request queue
* @bio: the buffer head that's been built up so far
* @biovec: the request that could be merged to it.
*
* Return amount of bytes we can take at this offset
*/
static int linear_mergeable_bvec(request_queue_t *q, struct bio *bio, struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
dev_info_t *dev0;
unsigned long maxsectors, bio_sectors = bio->bi_size >> 9;
sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
dev0 = which_dev(mddev, sector);
maxsectors = (dev0->size << 1) - (sector - (dev0->offset<<1));
if (maxsectors < bio_sectors)
maxsectors = 0;
else
maxsectors -= bio_sectors;
if (maxsectors <= (PAGE_SIZE >> 9 ) && bio_sectors == 0)
return biovec->bv_len;
/* The bytes available at this offset could be really big,
* so we cap at 2^31 to avoid overflow */
if (maxsectors > (1 << (31-9)))
return 1<<31;
return maxsectors << 9;
}
static void linear_unplug(request_queue_t *q)
{
mddev_t *mddev = q->queuedata;
linear_conf_t *conf = mddev_to_conf(mddev);
int i;
for (i=0; i < mddev->raid_disks; i++) {
request_queue_t *r_queue = bdev_get_queue(conf->disks[i].rdev->bdev);
if (r_queue->unplug_fn)
r_queue->unplug_fn(r_queue);
}
}
static int linear_issue_flush(request_queue_t *q, struct gendisk *disk,
sector_t *error_sector)
{
mddev_t *mddev = q->queuedata;
linear_conf_t *conf = mddev_to_conf(mddev);
int i, ret = 0;
for (i=0; i < mddev->raid_disks && ret == 0; i++) {
struct block_device *bdev = conf->disks[i].rdev->bdev;
request_queue_t *r_queue = bdev_get_queue(bdev);
if (!r_queue->issue_flush_fn)
ret = -EOPNOTSUPP;
else
ret = r_queue->issue_flush_fn(r_queue, bdev->bd_disk, error_sector);
}
return ret;
}
static int linear_run (mddev_t *mddev)
{
linear_conf_t *conf;
dev_info_t **table;
mdk_rdev_t *rdev;
int i, nb_zone, cnt;
sector_t min_spacing;
sector_t curr_offset;
struct list_head *tmp;
conf = kzalloc (sizeof (*conf) + mddev->raid_disks*sizeof(dev_info_t),
GFP_KERNEL);
if (!conf)
goto out;
mddev->private = conf;
cnt = 0;
mddev->array_size = 0;
ITERATE_RDEV(mddev,rdev,tmp) {
int j = rdev->raid_disk;
dev_info_t *disk = conf->disks + j;
if (j < 0 || j > mddev->raid_disks || disk->rdev) {
printk("linear: disk numbering problem. Aborting!\n");
goto out;
}
disk->rdev = rdev;
blk_queue_stack_limits(mddev->queue,
rdev->bdev->bd_disk->queue);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
mddev->queue->max_sectors > (PAGE_SIZE>>9))
blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
disk->size = rdev->size;
mddev->array_size += rdev->size;
cnt++;
}
if (cnt != mddev->raid_disks) {
printk("linear: not enough drives present. Aborting!\n");
goto out;
}
min_spacing = mddev->array_size;
sector_div(min_spacing, PAGE_SIZE/sizeof(struct dev_info *));
/* min_spacing is the minimum spacing that will fit the hash
* table in one PAGE. This may be much smaller than needed.
* We find the smallest non-terminal set of consecutive devices
* that is larger than min_spacing as use the size of that as
* the actual spacing
*/
conf->hash_spacing = mddev->array_size;
for (i=0; i < cnt-1 ; i++) {
sector_t sz = 0;
int j;
for (j=i; i<cnt-1 && sz < min_spacing ; j++)
sz += conf->disks[j].size;
if (sz >= min_spacing && sz < conf->hash_spacing)
conf->hash_spacing = sz;
}
/* hash_spacing may be too large for sector_div to work with,
* so we might need to pre-shift
*/
conf->preshift = 0;
if (sizeof(sector_t) > sizeof(u32)) {
sector_t space = conf->hash_spacing;
while (space > (sector_t)(~(u32)0)) {
space >>= 1;
conf->preshift++;
}
}
/*
* This code was restructured to work around a gcc-2.95.3 internal
* compiler error. Alter it with care.
*/
{
sector_t sz;
unsigned round;
unsigned long base;
sz = mddev->array_size >> conf->preshift;
sz += 1; /* force round-up */
base = conf->hash_spacing >> conf->preshift;
round = sector_div(sz, base);
nb_zone = sz + (round ? 1 : 0);
}
BUG_ON(nb_zone > PAGE_SIZE / sizeof(struct dev_info *));
conf->hash_table = kmalloc (sizeof (struct dev_info *) * nb_zone,
GFP_KERNEL);
if (!conf->hash_table)
goto out;
/*
* Here we generate the linear hash table
* First calculate the device offsets.
*/
conf->disks[0].offset = 0;
for (i=1; i<mddev->raid_disks; i++)
conf->disks[i].offset =
conf->disks[i-1].offset +
conf->disks[i-1].size;
table = conf->hash_table;
curr_offset = 0;
i = 0;
for (curr_offset = 0;
curr_offset < mddev->array_size;
curr_offset += conf->hash_spacing) {
while (i < mddev->raid_disks-1 &&
curr_offset >= conf->disks[i+1].offset)
i++;
*table ++ = conf->disks + i;
}
if (conf->preshift) {
conf->hash_spacing >>= conf->preshift;
/* round hash_spacing up so that when we divide by it,
* we err on the side of "too-low", which is safest.
*/
conf->hash_spacing++;
}
BUG_ON(table - conf->hash_table > nb_zone);
blk_queue_merge_bvec(mddev->queue, linear_mergeable_bvec);
mddev->queue->unplug_fn = linear_unplug;
mddev->queue->issue_flush_fn = linear_issue_flush;
return 0;
out:
kfree(conf);
return 1;
}
static int linear_stop (mddev_t *mddev)
{
linear_conf_t *conf = mddev_to_conf(mddev);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
kfree(conf->hash_table);
kfree(conf);
return 0;
}
static int linear_make_request (request_queue_t *q, struct bio *bio)
{
const int rw = bio_data_dir(bio);
mddev_t *mddev = q->queuedata;
dev_info_t *tmp_dev;
sector_t block;
if (unlikely(bio_barrier(bio))) {
bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
return 0;
}
disk_stat_inc(mddev->gendisk, ios[rw]);
disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
tmp_dev = which_dev(mddev, bio->bi_sector);
block = bio->bi_sector >> 1;
if (unlikely(block >= (tmp_dev->size + tmp_dev->offset)
|| block < tmp_dev->offset)) {
char b[BDEVNAME_SIZE];
printk("linear_make_request: Block %llu out of bounds on "
"dev %s size %llu offset %llu\n",
(unsigned long long)block,
bdevname(tmp_dev->rdev->bdev, b),
(unsigned long long)tmp_dev->size,
(unsigned long long)tmp_dev->offset);
bio_io_error(bio, bio->bi_size);
return 0;
}
if (unlikely(bio->bi_sector + (bio->bi_size >> 9) >
(tmp_dev->offset + tmp_dev->size)<<1)) {
/* This bio crosses a device boundary, so we have to
* split it.
*/
struct bio_pair *bp;
bp = bio_split(bio, bio_split_pool,
((tmp_dev->offset + tmp_dev->size)<<1) - bio->bi_sector);
if (linear_make_request(q, &bp->bio1))
generic_make_request(&bp->bio1);
if (linear_make_request(q, &bp->bio2))
generic_make_request(&bp->bio2);
bio_pair_release(bp);
return 0;
}
bio->bi_bdev = tmp_dev->rdev->bdev;
bio->bi_sector = bio->bi_sector - (tmp_dev->offset << 1) + tmp_dev->rdev->data_offset;
return 1;
}
static void linear_status (struct seq_file *seq, mddev_t *mddev)
{
#undef MD_DEBUG
#ifdef MD_DEBUG
int j;
linear_conf_t *conf = mddev_to_conf(mddev);
sector_t s = 0;
seq_printf(seq, " ");
for (j = 0; j < mddev->raid_disks; j++)
{
char b[BDEVNAME_SIZE];
s += conf->smallest_size;
seq_printf(seq, "[%s",
bdevname(conf->hash_table[j][0].rdev->bdev,b));
while (s > conf->hash_table[j][0].offset +
conf->hash_table[j][0].size)
seq_printf(seq, "/%s] ",
bdevname(conf->hash_table[j][1].rdev->bdev,b));
else
seq_printf(seq, "] ");
}
seq_printf(seq, "\n");
#endif
seq_printf(seq, " %dk rounding", mddev->chunk_size/1024);
}
static struct mdk_personality linear_personality =
{
.name = "linear",
.level = LEVEL_LINEAR,
.owner = THIS_MODULE,
.make_request = linear_make_request,
.run = linear_run,
.stop = linear_stop,
.status = linear_status,
};
static int __init linear_init (void)
{
return register_md_personality (&linear_personality);
}
static void linear_exit (void)
{
unregister_md_personality (&linear_personality);
}
module_init(linear_init);
module_exit(linear_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("md-personality-1"); /* LINEAR - degrecated*/
MODULE_ALIAS("md-level--1");