Krzysztof Kozlowski 05b0852ec9 ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-22 14:36:28 +08:00
..
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-08-03 19:19:34 -07:00
2020-06-26 22:40:22 +02:00
2020-07-06 18:52:01 +02:00
2020-08-03 19:19:34 -07:00
2020-06-04 19:47:11 -07:00
2020-08-03 19:19:34 -07:00
2020-03-20 23:20:26 +01:00
2020-08-03 19:19:34 -07:00
2020-08-17 16:06:01 +08:00
2020-08-17 16:06:33 +08:00
2020-02-08 13:58:44 -08:00
2020-08-17 16:06:36 +08:00
2020-07-22 22:05:17 +02:00
2020-07-22 22:05:22 +02:00
2020-01-13 10:11:40 -08:00
2020-08-03 19:19:34 -07:00
2020-07-16 22:36:35 +02:00
2020-08-03 19:19:34 -07:00
2020-06-04 20:02:14 -07:00
2020-06-04 20:02:14 -07:00
2020-06-26 22:40:22 +02:00
2020-08-03 19:19:34 -07:00
2020-02-17 14:39:34 +08:00
2020-07-13 19:48:53 +08:00