Lucas Stach 06a9a229b1 soc: imx: imx8m-blk-ctrl: set LCDIF panic read hurry level ...

When the LCDIF block signals a panic condition due to the display FIFO
falling below the threshold, the priority at the NoC level is boosted
to the value set in the LCDIF_ARCACHE_CTRL register of i.MX8MP mediamix
blk-ctrl. Same as all other blk-ctrl registers this register is reset
when the domain is powered down. Initialize the panic hurry levels for
both LCIF interfaces to the maximium priority (same as downstream TF-A
and proven to work with the other priorities set in the interconnect
driver) when coming back from power down.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

2023-01-01 13:25:38 +08:00

..

gpc.c

soc: imx: gpc: fix power up sequencing

2020-03-16 11:39:02 +08:00

gpcv2.c

soc: imx: gpcv2: add GENPD_FLAG_ACTIVE_WAKEUP flag for usb of imx8mm/n

2022-10-29 16:20:49 +08:00

imx8m-blk-ctrl.c

soc: imx: imx8m-blk-ctrl: set LCDIF panic read hurry level

2023-01-01 13:25:38 +08:00

imx8mp-blk-ctrl.c

soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock

2023-01-01 11:12:03 +08:00

imx93-blk-ctrl.c

soc: imx: add i.MX93 media blk ctrl driver

2022-09-17 16:31:06 +08:00

imx93-pd.c

soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()

2022-10-29 16:26:32 +08:00

imx93-src.c

soc: imx: add i.MX93 SRC power domain driver

2022-09-17 16:31:06 +08:00

Kconfig

soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock

2023-01-01 11:12:03 +08:00

Makefile

soc: imx: add Kconfig symbols for blk-ctrl drivers

2023-01-01 11:11:46 +08:00

soc-imx8m.c

soc: imx8m: Enable OCOTP clock before reading the register

2022-11-14 15:52:53 +08:00

soc-imx.c

soc: imx: Remove Layerscape check

2022-01-28 17:46:08 +08:00