Only the footbridge platforms provide their own DMA address translation helpers, so switch to the generic version for all other platforms, and consolidate the footbridge implementation to remove two levels of indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marc Zyngier <maz@kernel.org>
355 lines
7.7 KiB
C
355 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-footbridge/common.c
|
|
*
|
|
* Copyright (C) 1998-2000 Russell King, Dave Gilbert.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/list.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/dma-direct.h>
|
|
#include <video/vga.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/system_misc.h>
|
|
#include <asm/hardware/dec21285.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/pci.h>
|
|
|
|
#include "common.h"
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <asm/hardware/dec21285.h>
|
|
|
|
static int dc21285_get_irq(void)
|
|
{
|
|
void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
|
|
u32 mask = readl(irqstatus);
|
|
|
|
if (mask & IRQ_MASK_SDRAMPARITY)
|
|
return IRQ_SDRAMPARITY;
|
|
|
|
if (mask & IRQ_MASK_UART_RX)
|
|
return IRQ_CONRX;
|
|
|
|
if (mask & IRQ_MASK_DMA1)
|
|
return IRQ_DMA1;
|
|
|
|
if (mask & IRQ_MASK_DMA2)
|
|
return IRQ_DMA2;
|
|
|
|
if (mask & IRQ_MASK_IN0)
|
|
return IRQ_IN0;
|
|
|
|
if (mask & IRQ_MASK_IN1)
|
|
return IRQ_IN1;
|
|
|
|
if (mask & IRQ_MASK_IN2)
|
|
return IRQ_IN2;
|
|
|
|
if (mask & IRQ_MASK_IN3)
|
|
return IRQ_IN3;
|
|
|
|
if (mask & IRQ_MASK_PCI)
|
|
return IRQ_PCI;
|
|
|
|
if (mask & IRQ_MASK_DOORBELLHOST)
|
|
return IRQ_DOORBELLHOST;
|
|
|
|
if (mask & IRQ_MASK_I2OINPOST)
|
|
return IRQ_I2OINPOST;
|
|
|
|
if (mask & IRQ_MASK_TIMER1)
|
|
return IRQ_TIMER1;
|
|
|
|
if (mask & IRQ_MASK_TIMER2)
|
|
return IRQ_TIMER2;
|
|
|
|
if (mask & IRQ_MASK_TIMER3)
|
|
return IRQ_TIMER3;
|
|
|
|
if (mask & IRQ_MASK_UART_TX)
|
|
return IRQ_CONTX;
|
|
|
|
if (mask & IRQ_MASK_PCI_ABORT)
|
|
return IRQ_PCI_ABORT;
|
|
|
|
if (mask & IRQ_MASK_PCI_SERR)
|
|
return IRQ_PCI_SERR;
|
|
|
|
if (mask & IRQ_MASK_DISCARD_TIMER)
|
|
return IRQ_DISCARD_TIMER;
|
|
|
|
if (mask & IRQ_MASK_PCI_DPERR)
|
|
return IRQ_PCI_DPERR;
|
|
|
|
if (mask & IRQ_MASK_PCI_PERR)
|
|
return IRQ_PCI_PERR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dc21285_handle_irq(struct pt_regs *regs)
|
|
{
|
|
int irq;
|
|
do {
|
|
irq = dc21285_get_irq();
|
|
if (!irq)
|
|
break;
|
|
|
|
generic_handle_irq(irq);
|
|
} while (1);
|
|
}
|
|
|
|
|
|
unsigned int mem_fclk_21285 = 50000000;
|
|
|
|
EXPORT_SYMBOL(mem_fclk_21285);
|
|
|
|
static int __init early_fclk(char *arg)
|
|
{
|
|
mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
early_param("mem_fclk_21285", early_fclk);
|
|
|
|
static int __init parse_tag_memclk(const struct tag *tag)
|
|
{
|
|
mem_fclk_21285 = tag->u.memclk.fmemclk;
|
|
return 0;
|
|
}
|
|
|
|
__tagtable(ATAG_MEMCLK, parse_tag_memclk);
|
|
|
|
/*
|
|
* Footbridge IRQ translation table
|
|
* Converts from our IRQ numbers into FootBridge masks
|
|
*/
|
|
static const int fb_irq_mask[] = {
|
|
IRQ_MASK_UART_RX, /* 0 */
|
|
IRQ_MASK_UART_TX, /* 1 */
|
|
IRQ_MASK_TIMER1, /* 2 */
|
|
IRQ_MASK_TIMER2, /* 3 */
|
|
IRQ_MASK_TIMER3, /* 4 */
|
|
IRQ_MASK_IN0, /* 5 */
|
|
IRQ_MASK_IN1, /* 6 */
|
|
IRQ_MASK_IN2, /* 7 */
|
|
IRQ_MASK_IN3, /* 8 */
|
|
IRQ_MASK_DOORBELLHOST, /* 9 */
|
|
IRQ_MASK_DMA1, /* 10 */
|
|
IRQ_MASK_DMA2, /* 11 */
|
|
IRQ_MASK_PCI, /* 12 */
|
|
IRQ_MASK_SDRAMPARITY, /* 13 */
|
|
IRQ_MASK_I2OINPOST, /* 14 */
|
|
IRQ_MASK_PCI_ABORT, /* 15 */
|
|
IRQ_MASK_PCI_SERR, /* 16 */
|
|
IRQ_MASK_DISCARD_TIMER, /* 17 */
|
|
IRQ_MASK_PCI_DPERR, /* 18 */
|
|
IRQ_MASK_PCI_PERR, /* 19 */
|
|
};
|
|
|
|
static void fb_mask_irq(struct irq_data *d)
|
|
{
|
|
*CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(d->irq)];
|
|
}
|
|
|
|
static void fb_unmask_irq(struct irq_data *d)
|
|
{
|
|
*CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(d->irq)];
|
|
}
|
|
|
|
static struct irq_chip fb_chip = {
|
|
.irq_ack = fb_mask_irq,
|
|
.irq_mask = fb_mask_irq,
|
|
.irq_unmask = fb_unmask_irq,
|
|
};
|
|
|
|
static void __init __fb_init_irq(void)
|
|
{
|
|
unsigned int irq;
|
|
|
|
/*
|
|
* setup DC21285 IRQs
|
|
*/
|
|
*CSR_IRQ_DISABLE = -1;
|
|
*CSR_FIQ_DISABLE = -1;
|
|
|
|
for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
|
|
irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq);
|
|
irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
}
|
|
}
|
|
|
|
void __init footbridge_init_irq(void)
|
|
{
|
|
set_handle_irq(dc21285_handle_irq);
|
|
|
|
__fb_init_irq();
|
|
|
|
if (!footbridge_cfn_mode())
|
|
return;
|
|
|
|
if (machine_is_ebsa285())
|
|
/* The following is dependent on which slot
|
|
* you plug the Southbridge card into. We
|
|
* currently assume that you plug it into
|
|
* the right-hand most slot.
|
|
*/
|
|
isa_init_irq(IRQ_PCI);
|
|
|
|
if (machine_is_cats())
|
|
isa_init_irq(IRQ_IN2);
|
|
|
|
if (machine_is_netwinder())
|
|
isa_init_irq(IRQ_IN3);
|
|
}
|
|
|
|
/*
|
|
* Common mapping for all systems. Note that the outbound write flush is
|
|
* commented out since there is a "No Fix" problem with it. Not mapping
|
|
* it means that we have extra bullet protection on our feet.
|
|
*/
|
|
static struct map_desc fb_common_io_desc[] __initdata = {
|
|
{
|
|
.virtual = ARMCSR_BASE,
|
|
.pfn = __phys_to_pfn(DC21285_ARMCSR_BASE),
|
|
.length = ARMCSR_SIZE,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* The mapping when the footbridge is in host mode. We don't map any of
|
|
* this when we are in add-in mode.
|
|
*/
|
|
static struct map_desc ebsa285_host_io_desc[] __initdata = {
|
|
#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
|
|
{
|
|
.virtual = PCIMEM_BASE,
|
|
.pfn = __phys_to_pfn(DC21285_PCI_MEM),
|
|
.length = PCIMEM_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = PCICFG0_BASE,
|
|
.pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
|
|
.length = PCICFG0_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = PCICFG1_BASE,
|
|
.pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
|
|
.length = PCICFG1_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = PCIIACK_BASE,
|
|
.pfn = __phys_to_pfn(DC21285_PCI_IACK),
|
|
.length = PCIIACK_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
void __init footbridge_map_io(void)
|
|
{
|
|
/*
|
|
* Set up the common mapping first; we need this to
|
|
* determine whether we're in host mode or not.
|
|
*/
|
|
iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
|
|
|
|
/*
|
|
* Now, work out what we've got to map in addition on this
|
|
* platform.
|
|
*/
|
|
if (footbridge_cfn_mode()) {
|
|
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
|
|
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
|
|
}
|
|
|
|
vga_base = PCIMEM_BASE;
|
|
}
|
|
|
|
void footbridge_restart(enum reboot_mode mode, const char *cmd)
|
|
{
|
|
if (mode == REBOOT_SOFT) {
|
|
/* Jump into the ROM */
|
|
soft_restart(0x41000000);
|
|
} else {
|
|
/*
|
|
* Force the watchdog to do a CPU reset.
|
|
*
|
|
* After making sure that the watchdog is disabled
|
|
* (so we can change the timer registers) we first
|
|
* enable the timer to autoreload itself. Next, the
|
|
* timer interval is set really short and any
|
|
* current interrupt request is cleared (so we can
|
|
* see an edge transition). Finally, TIMER4 is
|
|
* enabled as the watchdog.
|
|
*/
|
|
*CSR_SA110_CNTL &= ~(1 << 13);
|
|
*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
|
|
TIMER_CNTL_AUTORELOAD |
|
|
TIMER_CNTL_DIV16;
|
|
*CSR_TIMER4_LOAD = 0x2;
|
|
*CSR_TIMER4_CLR = 0;
|
|
*CSR_SA110_CNTL |= (1 << 13);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_FOOTBRIDGE_ADDIN
|
|
|
|
static inline unsigned long fb_bus_sdram_offset(void)
|
|
{
|
|
return *CSR_PCISDRAMBASE & 0xfffffff0;
|
|
}
|
|
|
|
/*
|
|
* These two functions convert virtual addresses to PCI addresses and PCI
|
|
* addresses to virtual addresses. Note that it is only legal to use these
|
|
* on memory obtained via get_zeroed_page or kmalloc.
|
|
*/
|
|
unsigned long __virt_to_bus(unsigned long res)
|
|
{
|
|
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
|
|
|
|
return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
|
|
}
|
|
EXPORT_SYMBOL(__virt_to_bus);
|
|
|
|
unsigned long __bus_to_virt(unsigned long res)
|
|
{
|
|
res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
|
|
|
|
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
|
|
|
|
return res;
|
|
}
|
|
EXPORT_SYMBOL(__bus_to_virt);
|
|
#else
|
|
static inline unsigned long fb_bus_sdram_offset(void)
|
|
{
|
|
return BUS_OFFSET;
|
|
}
|
|
#endif /* CONFIG_FOOTBRIDGE_ADDIN */
|
|
|
|
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
|
|
{
|
|
return paddr + (fb_bus_sdram_offset() - PHYS_OFFSET);
|
|
}
|
|
|
|
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
|
|
{
|
|
return dev_addr - (fb_bus_sdram_offset() - PHYS_OFFSET);
|
|
}
|