7f6ee56ca0
This is an existing optional property that ieee80211.yaml/cfg80211
provides. It's useful to further restrict supported frequencies
for a specified device through device-tree.
For testing the addition, I added the ieee80211-freq-limit
property with values from an OpenMesh A62 device. This is
because the OpenMesh A62 has "special filters in front of
the RX+TX paths to the 5GHz PHYs. These filtered channel
can in theory still be used by the hardware but the signal
strength is reduced so much that it makes no sense."
The driver supported this since ~2018 by
commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit")
Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/c33c928b7c6c9bb4e7abe84eb8df9f440add275b.1686486464.git.chunkeey@gmail.com
363 lines
9.9 KiB
YAML
363 lines
9.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies ath10k wireless devices
|
|
|
|
maintainers:
|
|
- Kalle Valo <kvalo@kernel.org>
|
|
|
|
description:
|
|
Qualcomm Technologies, Inc. IEEE 802.11ac devices.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,ath10k # SDIO-based devices
|
|
- qcom,ipq4019-wifi
|
|
- qcom,wcn3990-wifi # SNoC-based devices
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
reg-names:
|
|
items:
|
|
- const: membase
|
|
|
|
interrupts:
|
|
minItems: 12
|
|
maxItems: 17
|
|
|
|
interrupt-names:
|
|
minItems: 12
|
|
maxItems: 17
|
|
|
|
memory-region:
|
|
maxItems: 1
|
|
description:
|
|
Reference to the MSA memory region used by the Wi-Fi firmware
|
|
running on the Q6 core.
|
|
|
|
iommus:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
clocks:
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
resets:
|
|
maxItems: 6
|
|
|
|
reset-names:
|
|
items:
|
|
- const: wifi_cpu_init
|
|
- const: wifi_radio_srif
|
|
- const: wifi_radio_warm
|
|
- const: wifi_radio_cold
|
|
- const: wifi_core_warm
|
|
- const: wifi_core_cold
|
|
|
|
ext-fem-name:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description: Name of external front end module used.
|
|
enum:
|
|
- microsemi-lx5586
|
|
- sky85703-11
|
|
- sky85803
|
|
|
|
wifi-firmware:
|
|
type: object
|
|
additionalProperties: false
|
|
description: |
|
|
The ath10k Wi-Fi node can contain one optional firmware subnode.
|
|
Firmware subnode is needed when the platform does not have Trustzone.
|
|
properties:
|
|
iommus:
|
|
maxItems: 1
|
|
required:
|
|
- iommus
|
|
|
|
ieee80211-freq-limit: true
|
|
|
|
qcom,ath10k-calibration-data:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Calibration data + board-specific data as a byte array. The length
|
|
can vary between hardware versions.
|
|
|
|
qcom,ath10k-calibration-variant:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description:
|
|
Unique variant identifier of the calibration data in board-2.bin
|
|
for designs with colliding bus and device specific ids
|
|
|
|
qcom,ath10k-pre-calibration-data:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
description:
|
|
Pre-calibration data as a byte array. The length can vary between
|
|
hardware versions.
|
|
|
|
qcom,coexist-support:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
enum: [0, 1]
|
|
description:
|
|
Indicate coex support by the hardware.
|
|
|
|
qcom,coexist-gpio-pin:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
COEX GPIO number provided to the Wi-Fi firmware.
|
|
|
|
qcom,msa-fixed-perm:
|
|
type: boolean
|
|
description:
|
|
Whether to skip executing an SCM call that reassigns the memory
|
|
region ownership.
|
|
|
|
qcom,smem-states:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
description: State bits used by the AP to signal the WLAN Q6.
|
|
items:
|
|
- description: Signal bits used to enable/disable low power mode
|
|
on WCN in the case of WoW (Wake on Wireless).
|
|
|
|
qcom,smem-state-names:
|
|
description: The names of the state bits used for SMP2P output.
|
|
items:
|
|
- const: wlan-smp2p-out
|
|
|
|
qcom,snoc-host-cap-8bit-quirk:
|
|
type: boolean
|
|
description:
|
|
Quirk specifying that the firmware expects the 8bit version
|
|
of the host capability QMI request
|
|
|
|
qcom,xo-cal-data:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
XO cal offset to be configured in XO trim register.
|
|
|
|
vdd-0.8-cx-mx-supply:
|
|
description: Main logic power rail
|
|
|
|
vdd-1.8-xo-supply:
|
|
description: Crystal oscillator supply
|
|
|
|
vdd-1.3-rfa-supply:
|
|
description: RFA supply
|
|
|
|
vdd-3.3-ch0-supply:
|
|
description: Primary Wi-Fi antenna supply
|
|
|
|
vdd-3.3-ch1-supply:
|
|
description: Secondary Wi-Fi antenna supply
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: ieee80211.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq4019-wifi
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
minItems: 17
|
|
maxItems: 17
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: msi0
|
|
- const: msi1
|
|
- const: msi2
|
|
- const: msi3
|
|
- const: msi4
|
|
- const: msi5
|
|
- const: msi6
|
|
- const: msi7
|
|
- const: msi8
|
|
- const: msi9
|
|
- const: msi10
|
|
- const: msi11
|
|
- const: msi12
|
|
- const: msi13
|
|
- const: msi14
|
|
- const: msi15
|
|
- const: legacy
|
|
|
|
clocks:
|
|
items:
|
|
- description: Wi-Fi command clock
|
|
- description: Wi-Fi reference clock
|
|
- description: Wi-Fi RTC clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: wifi_wcss_cmd
|
|
- const: wifi_wcss_ref
|
|
- const: wifi_wcss_rtc
|
|
|
|
required:
|
|
- clocks
|
|
- clock-names
|
|
- interrupts
|
|
- interrupt-names
|
|
- resets
|
|
- reset-names
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,wcn3990-wifi
|
|
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 1
|
|
items:
|
|
- description: XO reference clock
|
|
- description: Qualcomm Debug Subsystem clock
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
items:
|
|
- const: cxo_ref_clk_pin
|
|
- const: qdss
|
|
|
|
interrupts:
|
|
items:
|
|
- description: CE0
|
|
- description: CE1
|
|
- description: CE2
|
|
- description: CE3
|
|
- description: CE4
|
|
- description: CE5
|
|
- description: CE6
|
|
- description: CE7
|
|
- description: CE8
|
|
- description: CE9
|
|
- description: CE10
|
|
- description: CE11
|
|
|
|
interrupt-names: false
|
|
|
|
required:
|
|
- interrupts
|
|
|
|
examples:
|
|
# SNoC
|
|
- |
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
wifi@18800000 {
|
|
compatible = "qcom,wcn3990-wifi";
|
|
reg = <0x18800000 0x800000>;
|
|
reg-names = "membase";
|
|
memory-region = <&wlan_msa_mem>;
|
|
clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
|
|
clock-names = "cxo_ref_clk_pin";
|
|
interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&anoc2_smmu 0x1900>,
|
|
<&anoc2_smmu 0x1901>;
|
|
qcom,snoc-host-cap-8bit-quirk;
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
|
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
|
|
|
wifi-firmware {
|
|
iommus = <&apps_smmu 0x1c02 0x1>;
|
|
};
|
|
};
|
|
|
|
# AHB
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
|
|
|
|
wifi@a000000 {
|
|
compatible = "qcom,ipq4019-wifi";
|
|
reg = <0xa000000 0x200000>;
|
|
resets = <&gcc WIFI0_CPU_INIT_RESET>,
|
|
<&gcc WIFI0_RADIO_SRIF_RESET>,
|
|
<&gcc WIFI0_RADIO_WARM_RESET>,
|
|
<&gcc WIFI0_RADIO_COLD_RESET>,
|
|
<&gcc WIFI0_CORE_WARM_RESET>,
|
|
<&gcc WIFI0_CORE_COLD_RESET>;
|
|
reset-names = "wifi_cpu_init",
|
|
"wifi_radio_srif",
|
|
"wifi_radio_warm",
|
|
"wifi_radio_cold",
|
|
"wifi_core_warm",
|
|
"wifi_core_cold";
|
|
clocks = <&gcc GCC_WCSS2G_CLK>,
|
|
<&gcc GCC_WCSS2G_REF_CLK>,
|
|
<&gcc GCC_WCSS2G_RTC_CLK>;
|
|
clock-names = "wifi_wcss_cmd",
|
|
"wifi_wcss_ref",
|
|
"wifi_wcss_rtc";
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi0",
|
|
"msi1",
|
|
"msi2",
|
|
"msi3",
|
|
"msi4",
|
|
"msi5",
|
|
"msi6",
|
|
"msi7",
|
|
"msi8",
|
|
"msi9",
|
|
"msi10",
|
|
"msi11",
|
|
"msi12",
|
|
"msi13",
|
|
"msi14",
|
|
"msi15",
|
|
"legacy";
|
|
ieee80211-freq-limit = <5470000 5875000>;
|
|
};
|