Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
398 lines
9.9 KiB
C
398 lines
9.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
|
|
*
|
|
* Copyright (C) 2019 NXP
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include "core.h"
|
|
|
|
#define USB3_CORE_CTRL1 0x00
|
|
#define USB3_CORE_CTRL2 0x04
|
|
#define USB3_INT_REG 0x08
|
|
#define USB3_CORE_STATUS 0x0c
|
|
#define XHCI_DEBUG_LINK_ST 0x10
|
|
#define XHCI_DEBUG_BUS 0x14
|
|
#define USB3_SSPHY_CTRL1 0x40
|
|
#define USB3_SSPHY_CTRL2 0x44
|
|
#define USB3_SSPHY_STATUS 0x4c
|
|
#define USB2_PHY_CTRL1 0x50
|
|
#define USB2_PHY_CTRL2 0x54
|
|
#define USB2_PHY_STATUS 0x5c
|
|
|
|
/* Register bits definition */
|
|
|
|
/* USB3_CORE_CTRL1 */
|
|
#define SW_RESET_MASK GENMASK(31, 26)
|
|
#define PWR_SW_RESET BIT(31)
|
|
#define APB_SW_RESET BIT(30)
|
|
#define AXI_SW_RESET BIT(29)
|
|
#define RW_SW_RESET BIT(28)
|
|
#define PHY_SW_RESET BIT(27)
|
|
#define PHYAHB_SW_RESET BIT(26)
|
|
#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
|
|
RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
|
|
#define OC_DISABLE BIT(9)
|
|
#define MDCTRL_CLK_SEL BIT(7)
|
|
#define MODE_STRAP_MASK (0x7)
|
|
#define DEV_MODE (1 << 2)
|
|
#define HOST_MODE (1 << 1)
|
|
#define OTG_MODE (1 << 0)
|
|
|
|
/* USB3_INT_REG */
|
|
#define CLK_125_REQ BIT(29)
|
|
#define LPM_CLK_REQ BIT(28)
|
|
#define DEVU3_WAEKUP_EN BIT(14)
|
|
#define OTG_WAKEUP_EN BIT(12)
|
|
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
|
|
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
|
|
|
|
/* USB3_CORE_STATUS */
|
|
#define MDCTRL_CLK_STATUS BIT(15)
|
|
#define DEV_POWER_ON_READY BIT(13)
|
|
#define HOST_POWER_ON_READY BIT(12)
|
|
|
|
/* USB3_SSPHY_STATUS */
|
|
#define CLK_VALID_MASK (0x3f << 26)
|
|
#define CLK_VALID_COMPARE_BITS (0xf << 28)
|
|
#define PHY_REFCLK_REQ (1 << 0)
|
|
|
|
/* OTG registers definition */
|
|
#define OTGSTS 0x4
|
|
/* OTGSTS */
|
|
#define OTG_NRDY BIT(11)
|
|
|
|
/* xHCI registers definition */
|
|
#define XECP_PM_PMCSR 0x8018
|
|
#define XECP_AUX_CTRL_REG1 0x8120
|
|
|
|
/* Register bits definition */
|
|
/* XECP_AUX_CTRL_REG1 */
|
|
#define CFG_RXDET_P3_EN BIT(15)
|
|
|
|
/* XECP_PM_PMCSR */
|
|
#define PS_MASK GENMASK(1, 0)
|
|
#define PS_D0 0
|
|
#define PS_D1 1
|
|
|
|
struct cdns_imx {
|
|
struct device *dev;
|
|
void __iomem *noncore;
|
|
struct clk_bulk_data *clks;
|
|
int num_clks;
|
|
struct platform_device *cdns3_pdev;
|
|
};
|
|
|
|
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
|
|
{
|
|
return readl(data->noncore + offset);
|
|
}
|
|
|
|
static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, data->noncore + offset);
|
|
}
|
|
|
|
static const struct clk_bulk_data imx_cdns3_core_clks[] = {
|
|
{ .id = "usb3_lpm_clk" },
|
|
{ .id = "usb3_bus_clk" },
|
|
{ .id = "usb3_aclk" },
|
|
{ .id = "usb3_ipg_clk" },
|
|
{ .id = "usb3_core_pclk" },
|
|
};
|
|
|
|
static int cdns_imx_noncore_init(struct cdns_imx *data)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
struct device *dev = data->dev;
|
|
|
|
cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
|
|
udelay(1);
|
|
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
|
|
(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
|
|
10, 100000);
|
|
if (ret) {
|
|
dev_err(dev, "wait clkvld timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value |= ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
udelay(1);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
value |= HOST_INT1_EN | DEV_INT_EN;
|
|
cdns_imx_writel(data, USB3_INT_REG, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value &= ~ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup);
|
|
static struct cdns3_platform_data cdns_imx_pdata = {
|
|
.platform_suspend = cdns_imx_platform_suspend,
|
|
.quirks = CDNS3_DEFAULT_PM_RUNTIME_ALLOW,
|
|
};
|
|
|
|
static const struct of_dev_auxdata cdns_imx_auxdata[] = {
|
|
{
|
|
.compatible = "cdns,usb3",
|
|
.platform_data = &cdns_imx_pdata,
|
|
},
|
|
{},
|
|
};
|
|
|
|
static int cdns_imx_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct cdns_imx *data;
|
|
int ret;
|
|
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
data->dev = dev;
|
|
data->noncore = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(data->noncore)) {
|
|
dev_err(dev, "can't map IOMEM resource\n");
|
|
return PTR_ERR(data->noncore);
|
|
}
|
|
|
|
data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
|
|
data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
|
|
ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = cdns_imx_noncore_init(data);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
device_set_wakeup_capable(dev, true);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return ret;
|
|
err:
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_remove_core(struct device *dev, void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
platform_device_unregister(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
device_for_each_child(dev, NULL, cdns_imx_remove_core);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
|
|
{
|
|
u32 value;
|
|
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
if (enable)
|
|
value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
|
|
else
|
|
value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
|
|
|
|
cdns_imx_writel(data, USB3_INT_REG, value);
|
|
}
|
|
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup)
|
|
{
|
|
struct cdns *cdns = dev_get_drvdata(dev);
|
|
struct device *parent = dev->parent;
|
|
struct cdns_imx *data = dev_get_drvdata(parent);
|
|
void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
|
|
void __iomem *xhci_regs = cdns->xhci_regs;
|
|
u32 value;
|
|
int ret = 0;
|
|
|
|
if (cdns->role != USB_ROLE_HOST)
|
|
return 0;
|
|
|
|
if (suspend) {
|
|
/* SW request low power when all usb ports allow to it ??? */
|
|
value = readl(xhci_regs + XECP_PM_PMCSR);
|
|
value &= ~PS_MASK;
|
|
value |= PS_D1;
|
|
writel(value, xhci_regs + XECP_PM_PMCSR);
|
|
|
|
/* mdctrl_clk_sel */
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value |= MDCTRL_CLK_SEL;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
/* wait for mdctrl_clk_status */
|
|
value = cdns_imx_readl(data, USB3_CORE_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
|
|
(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait mdctrl_clk_status timeout\n");
|
|
|
|
/* wait lpm_clk_req to be 0 */
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
|
|
(value & LPM_CLK_REQ) != LPM_CLK_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait lpm_clk_req timeout\n");
|
|
|
|
/* wait phy_refclk_req to be 0 */
|
|
value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
|
|
(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait phy_refclk_req timeout\n");
|
|
|
|
cdns3_set_wakeup(data, wakeup);
|
|
} else {
|
|
cdns3_set_wakeup(data, false);
|
|
|
|
/* SW request D0 */
|
|
value = readl(xhci_regs + XECP_PM_PMCSR);
|
|
value &= ~PS_MASK;
|
|
value |= PS_D0;
|
|
writel(value, xhci_regs + XECP_PM_PMCSR);
|
|
|
|
/* clr CFG_RXDET_P3_EN */
|
|
value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
|
|
value &= ~CFG_RXDET_P3_EN;
|
|
writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
|
|
|
|
/* clear mdctrl_clk_sel */
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value &= ~MDCTRL_CLK_SEL;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
/* wait CLK_125_REQ to be 1 */
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
|
|
(value & CLK_125_REQ) == CLK_125_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait CLK_125_REQ timeout\n");
|
|
|
|
/* wait for mdctrl_clk_status is cleared */
|
|
value = cdns_imx_readl(data, USB3_CORE_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
|
|
(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
|
|
|
|
/* Wait until OTG_NRDY is 0 */
|
|
value = readl(otg_regs + OTGSTS);
|
|
ret = readl_poll_timeout(otg_regs + OTGSTS, value,
|
|
(value & OTG_NRDY) != OTG_NRDY,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait OTG ready timeout\n");
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int cdns_imx_resume(struct device *dev)
|
|
{
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
|
|
return clk_bulk_prepare_enable(data->num_clks, data->clks);
|
|
}
|
|
|
|
static int cdns_imx_suspend(struct device *dev)
|
|
{
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops cdns_imx_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id cdns_imx_of_match[] = {
|
|
{ .compatible = "fsl,imx8qm-usb3", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
|
|
|
|
static struct platform_driver cdns_imx_driver = {
|
|
.probe = cdns_imx_probe,
|
|
.remove = cdns_imx_remove,
|
|
.driver = {
|
|
.name = "cdns3-imx",
|
|
.of_match_table = cdns_imx_of_match,
|
|
.pm = &cdns_imx_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(cdns_imx_driver);
|
|
|
|
MODULE_ALIAS("platform:cdns3-imx");
|
|
MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
|