91a69d38cf
The driver compiles just fine as a module. The parent driver's Kconfig symbol already depends on X86 || COMPILE_TEST, so X86 can just be dropped from the dependencies allowing compilation on other platforms than x86. Link: https://lore.kernel.org/r/20230804142707.412137-3-u.kleine-koenig@pengutronix.de Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
192 lines
4.8 KiB
C
192 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2015 Intel Corporation. All rights reserved.
|
|
*
|
|
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/intel_soc_pmic.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#define PWM0_CLK_DIV 0x4B
|
|
#define PWM_OUTPUT_ENABLE BIT(7)
|
|
#define PWM_DIV_CLK_0 0x00 /* DIVIDECLK = BASECLK */
|
|
#define PWM_DIV_CLK_100 0x63 /* DIVIDECLK = BASECLK/100 */
|
|
#define PWM_DIV_CLK_128 0x7F /* DIVIDECLK = BASECLK/128 */
|
|
|
|
#define PWM0_DUTY_CYCLE 0x4E
|
|
#define BACKLIGHT_EN 0x51
|
|
|
|
#define PWM_MAX_LEVEL 0xFF
|
|
|
|
#define PWM_BASE_CLK_MHZ 6 /* 6 MHz */
|
|
#define PWM_MAX_PERIOD_NS 5461334 /* 183 Hz */
|
|
|
|
/**
|
|
* struct crystalcove_pwm - Crystal Cove PWM controller
|
|
* @chip: the abstract pwm_chip structure.
|
|
* @regmap: the regmap from the parent device.
|
|
*/
|
|
struct crystalcove_pwm {
|
|
struct pwm_chip chip;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct crystalcove_pwm, chip);
|
|
}
|
|
|
|
static int crc_pwm_calc_clk_div(int period_ns)
|
|
{
|
|
int clk_div;
|
|
|
|
clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
|
|
/* clk_div 1 - 128, maps to register values 0-127 */
|
|
if (clk_div > 0)
|
|
clk_div--;
|
|
|
|
return clk_div;
|
|
}
|
|
|
|
static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
|
|
struct device *dev = crc_pwm->chip.dev;
|
|
int err;
|
|
|
|
if (state->period > PWM_MAX_PERIOD_NS) {
|
|
dev_err(dev, "un-supported period_ns\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (pwm_is_enabled(pwm) && !state->enabled) {
|
|
err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
|
|
if (err) {
|
|
dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (pwm_get_duty_cycle(pwm) != state->duty_cycle ||
|
|
pwm_get_period(pwm) != state->period) {
|
|
u64 level = state->duty_cycle * PWM_MAX_LEVEL;
|
|
|
|
do_div(level, state->period);
|
|
|
|
err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
|
|
if (err) {
|
|
dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (pwm_is_enabled(pwm) && state->enabled &&
|
|
pwm_get_period(pwm) != state->period) {
|
|
/* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */
|
|
err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
|
|
if (err) {
|
|
dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (pwm_get_period(pwm) != state->period ||
|
|
pwm_is_enabled(pwm) != state->enabled) {
|
|
int clk_div = crc_pwm_calc_clk_div(state->period);
|
|
int pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0;
|
|
|
|
err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
|
|
clk_div | pwm_output_enable);
|
|
if (err) {
|
|
dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (!pwm_is_enabled(pwm) && state->enabled) {
|
|
err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
|
|
if (err) {
|
|
dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int crc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
|
|
struct device *dev = crc_pwm->chip.dev;
|
|
unsigned int clk_div, clk_div_reg, duty_cycle_reg;
|
|
int error;
|
|
|
|
error = regmap_read(crc_pwm->regmap, PWM0_CLK_DIV, &clk_div_reg);
|
|
if (error) {
|
|
dev_err(dev, "Error reading PWM0_CLK_DIV %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = regmap_read(crc_pwm->regmap, PWM0_DUTY_CYCLE, &duty_cycle_reg);
|
|
if (error) {
|
|
dev_err(dev, "Error reading PWM0_DUTY_CYCLE %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
clk_div = (clk_div_reg & ~PWM_OUTPUT_ENABLE) + 1;
|
|
|
|
state->period =
|
|
DIV_ROUND_UP(clk_div * NSEC_PER_USEC * 256, PWM_BASE_CLK_MHZ);
|
|
state->duty_cycle =
|
|
DIV_ROUND_UP_ULL(duty_cycle_reg * state->period, PWM_MAX_LEVEL);
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
state->enabled = !!(clk_div_reg & PWM_OUTPUT_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops crc_pwm_ops = {
|
|
.apply = crc_pwm_apply,
|
|
.get_state = crc_pwm_get_state,
|
|
};
|
|
|
|
static int crystalcove_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct crystalcove_pwm *pwm;
|
|
struct device *dev = pdev->dev.parent;
|
|
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
|
|
|
|
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
|
if (!pwm)
|
|
return -ENOMEM;
|
|
|
|
pwm->chip.dev = &pdev->dev;
|
|
pwm->chip.ops = &crc_pwm_ops;
|
|
pwm->chip.npwm = 1;
|
|
|
|
/* get the PMIC regmap */
|
|
pwm->regmap = pmic->regmap;
|
|
|
|
return devm_pwmchip_add(&pdev->dev, &pwm->chip);
|
|
}
|
|
|
|
static struct platform_driver crystalcove_pwm_driver = {
|
|
.probe = crystalcove_pwm_probe,
|
|
.driver = {
|
|
.name = "crystal_cove_pwm",
|
|
},
|
|
};
|
|
module_platform_driver(crystalcove_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:crystal_cove_pwm");
|
|
MODULE_DESCRIPTION("Intel Crystalcove (CRC) PWM support");
|
|
MODULE_LICENSE("GPL");
|