384461abca
Instead of requiring each driver to care for assigning the owner member of struct pwm_ops, handle that implicitly using a macro. Note that the owner member has to be moved to struct pwm_chip, as the ops structure usually lives in read-only memory and so cannot be modified. The upside is that new low level drivers cannot forget the assignment and save one line each. The pwm-crc driver didn't assign .owner, that's not a problem in practice though as the driver cannot be compiled as a module. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i Acked-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
205 lines
4.9 KiB
C
205 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* PWM framework driver for Cirrus Logic EP93xx
|
|
*
|
|
* Copyright (c) 2009 Matthieu Crapet <mcrapet@gmail.com>
|
|
* Copyright (c) 2009, 2013 H Hartley Sweeten <hsweeten@visionengravers.com>
|
|
*
|
|
* EP9301/02 have only one channel:
|
|
* platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
|
|
*
|
|
* EP9307 has only one channel:
|
|
* platform device ep93xx-pwm.0 - PWMOUT
|
|
*
|
|
* EP9312/15 have two channels:
|
|
* platform device ep93xx-pwm.0 - PWMOUT
|
|
* platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <linux/soc/cirrus/ep93xx.h> /* for ep93xx_pwm_{acquire,release}_gpio() */
|
|
|
|
#define EP93XX_PWMx_TERM_COUNT 0x00
|
|
#define EP93XX_PWMx_DUTY_CYCLE 0x04
|
|
#define EP93XX_PWMx_ENABLE 0x08
|
|
#define EP93XX_PWMx_INVERT 0x0c
|
|
|
|
struct ep93xx_pwm {
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct pwm_chip chip;
|
|
};
|
|
|
|
static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct ep93xx_pwm, chip);
|
|
}
|
|
|
|
static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(chip->dev);
|
|
|
|
return ep93xx_pwm_acquire_gpio(pdev);
|
|
}
|
|
|
|
static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(chip->dev);
|
|
|
|
ep93xx_pwm_release_gpio(pdev);
|
|
}
|
|
|
|
static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int ret;
|
|
struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
|
|
bool enabled = state->enabled;
|
|
void __iomem *base = ep93xx_pwm->base;
|
|
unsigned long long c;
|
|
unsigned long period_cycles;
|
|
unsigned long duty_cycles;
|
|
unsigned long term;
|
|
|
|
if (state->polarity != pwm->state.polarity) {
|
|
if (enabled) {
|
|
writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
|
|
clk_disable_unprepare(ep93xx_pwm->clk);
|
|
enabled = false;
|
|
}
|
|
|
|
/*
|
|
* The clock needs to be enabled to access the PWM registers.
|
|
* Polarity can only be changed when the PWM is disabled.
|
|
*/
|
|
ret = clk_prepare_enable(ep93xx_pwm->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (state->polarity == PWM_POLARITY_INVERSED)
|
|
writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
|
|
else
|
|
writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
|
|
|
|
clk_disable_unprepare(ep93xx_pwm->clk);
|
|
}
|
|
|
|
if (!state->enabled) {
|
|
if (enabled) {
|
|
writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
|
|
clk_disable_unprepare(ep93xx_pwm->clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The clock needs to be enabled to access the PWM registers.
|
|
* Configuration can be changed at any time.
|
|
*/
|
|
if (!pwm_is_enabled(pwm)) {
|
|
ret = clk_prepare_enable(ep93xx_pwm->clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
c = clk_get_rate(ep93xx_pwm->clk);
|
|
c *= state->period;
|
|
do_div(c, 1000000000);
|
|
period_cycles = c;
|
|
|
|
c = period_cycles;
|
|
c *= state->duty_cycle;
|
|
do_div(c, state->period);
|
|
duty_cycles = c;
|
|
|
|
if (period_cycles < 0x10000 && duty_cycles < 0x10000) {
|
|
term = readw(base + EP93XX_PWMx_TERM_COUNT);
|
|
|
|
/* Order is important if PWM is running */
|
|
if (period_cycles > term) {
|
|
writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
|
|
writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
|
|
} else {
|
|
writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
|
|
writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
|
|
}
|
|
ret = 0;
|
|
} else {
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
if (!pwm_is_enabled(pwm))
|
|
clk_disable_unprepare(ep93xx_pwm->clk);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!enabled) {
|
|
ret = clk_prepare_enable(ep93xx_pwm->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops ep93xx_pwm_ops = {
|
|
.request = ep93xx_pwm_request,
|
|
.free = ep93xx_pwm_free,
|
|
.apply = ep93xx_pwm_apply,
|
|
};
|
|
|
|
static int ep93xx_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct ep93xx_pwm *ep93xx_pwm;
|
|
int ret;
|
|
|
|
ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL);
|
|
if (!ep93xx_pwm)
|
|
return -ENOMEM;
|
|
|
|
ep93xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(ep93xx_pwm->base))
|
|
return PTR_ERR(ep93xx_pwm->base);
|
|
|
|
ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk");
|
|
if (IS_ERR(ep93xx_pwm->clk))
|
|
return PTR_ERR(ep93xx_pwm->clk);
|
|
|
|
ep93xx_pwm->chip.dev = &pdev->dev;
|
|
ep93xx_pwm->chip.ops = &ep93xx_pwm_ops;
|
|
ep93xx_pwm->chip.npwm = 1;
|
|
|
|
ret = devm_pwmchip_add(&pdev->dev, &ep93xx_pwm->chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ep93xx_pwm_driver = {
|
|
.driver = {
|
|
.name = "ep93xx-pwm",
|
|
},
|
|
.probe = ep93xx_pwm_probe,
|
|
};
|
|
module_platform_driver(ep93xx_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver");
|
|
MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
|
|
MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
|
|
MODULE_ALIAS("platform:ep93xx-pwm");
|
|
MODULE_LICENSE("GPL");
|