iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/iio
History
Jakob Hauser 0ca09faade iio: magnetometer: yas530: Change data type of calibration coefficients 
This is a preparation for adding YAS537 variant.

YAS537 uses other data types on the calibration coefficients [1] than YAS530 [2]
and YAS532 [3].

On YAS537, at least for a4 and a7 this could matter because 8-bit unsigned data
from the register gets stored into a signed data type, therefore this should be
8-bit as well.

For YAS530/532, on the other hand, it doesn't seem to matter. The size of a2-a9
and k is smaller than 8-bit at extraction, also the applied math is low. And
Cx/Cy1/Cy2, now being defined as signed 16-bit, are extracted as unsigned 8-bit
and undergo only minor math.

[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L76-L78
[2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L526-L527
[3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L76-L77

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/f1e53bd6672aebe59f9b236b41374482edf888f8.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
..
accel
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
2022-07-19 09:38:53 +01:00
adc
iio: adc: xilinx-xadc: Benefit from devm_clk_get_enabled() to simplify
2022-08-15 22:30:02 +01:00
addac
iio: addac: ad74413r: Fix alignment for DMA safety
2022-06-14 11:53:15 +01:00
afe
iio: afe: rescale: export symbols used during testing
2022-07-16 19:01:14 +01:00
amplifiers
iio: amplifiers: ad8366: Fix alignment for DMA safety
2022-06-14 11:53:15 +01:00
buffer
iio: core: Simplify the registration of kfifo buffers
2022-04-10 16:25:46 +01:00
cdc
iio: cdc: ad7746: Move driver out of staging.
2022-08-15 22:30:01 +01:00
chemical
iio: chemical: scd4x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
2022-07-18 18:48:17 +01:00
common
iio: cros: Register FIFO callback after sensor is registered
2022-07-18 18:29:13 +01:00
dac
iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
2022-07-18 18:48:18 +01:00
dummy
Bitmap patches for 5.19-rc1
2022-06-04 14:04:27 -07:00
filter
iio:filter:admv8818: select REGMAP_SPI for ADMV8818
2022-04-04 09:19:01 +01:00
frequency
iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify
2022-08-15 22:30:02 +01:00
gyro
iio: gyro: itg3200: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
2022-07-18 18:48:18 +01:00
health
iio: health: afe4404: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
2022-07-18 18:48:18 +01:00
humidity
IIO new device support, features and minor fixes for 5.20
2022-07-14 15:04:49 +02:00
imu
iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify
2022-08-15 22:30:03 +01:00
light
iio: light: cm32181: Mark the dev_pm_ops static.
2022-08-15 22:30:01 +01:00
magnetometer
iio: magnetometer: yas530: Change data type of calibration coefficients
2022-08-15 22:30:03 +01:00
multiplexer
iio: multiplexer: Make use of device properties
2022-04-04 09:11:24 +01:00
orientation
iio: hid-sensors: bind IIO channels alloc to device object
2021-07-13 18:21:53 +01:00
position
iio: hid-sensors: Update header includes
2021-06-16 14:53:13 +01:00
potentiometer
iio: potentiometer: mcp4131: Fix alignment for DMA safety
2022-06-14 11:53:19 +01:00
potentiostat
iio: lmp91000: Remove no-op trigger ops
2021-11-17 17:51:38 +00:00
pressure
iio: cros: Register FIFO callback after sensor is registered
2022-07-18 18:29:13 +01:00
proximity
iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
2022-07-18 18:48:18 +01:00
resolver
iio: resolver: ad2s90: Fix alignment for DMA safety
2022-06-14 11:53:19 +01:00
temperature
iio: temperature: mlx90632 Add supply regulator to sensor
2022-08-15 22:30:03 +01:00
test
iio: test: Mark file local structure arrays static.
2022-08-15 22:30:01 +01:00
trigger
IIO new device support, features and minor fixes for 5.20
2022-07-14 15:04:49 +02:00
iio_core_trigger.h
iio: core-trigger: make iio_device_register_trigger_consumer() an int return
2021-03-11 20:47:02 +00:00
iio_core.h
iio: Mark iio_device_type as const
2021-11-17 17:51:35 +00:00
industrialio-buffer.c
iio: Fix indentation for multiline conditional.
2022-08-15 22:29:57 +01:00
industrialio-configfs.c
…
industrialio-core.c
iio: core: Introduce _zeropoint for differential channels
2022-08-15 22:30:01 +01:00
industrialio-event.c
iio: Add names for function definition arguments.
2022-08-15 22:29:57 +01:00
industrialio-sw-device.c
iio: Don't use bare "unsigned"
2022-07-01 11:19:08 +01:00
industrialio-sw-trigger.c
iio: Don't use bare "unsigned"
2022-07-01 11:19:08 +01:00
industrialio-trigger.c
iio: Add blank lines after declarations.
2022-08-15 22:29:56 +01:00
industrialio-triggered-event.c
iio: core: move @id from struct iio_dev to struct iio_dev_opaque
2021-05-17 13:49:13 +01:00
inkern.c
iio: inkern: fix coding style warnings
2022-08-15 22:30:00 +01:00
Kconfig
iio: add filter subfolder
2021-12-16 17:29:46 +00:00
Makefile
iio: add filter subfolder
2021-12-16 17:29:46 +00:00
TODO
iio: add a TODO
2020-03-08 17:28:53 +00:00