42cdd52148
The sysfs files are replaced by the batadv generic netlink family. The old sysfs configuration interface was frowned upon by other kernel developers. But the files cannot be removed immediately because userspace tools might still depend on it. Instead schedule for its removal in 2021. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
111 lines
4.5 KiB
Plaintext
111 lines
4.5 KiB
Plaintext
This ABI is deprecated and will be removed after 2021. It is
|
|
replaced with the batadv generic netlink family.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
|
|
Date: May 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Indicates whether the batman protocol messages of the
|
|
mesh <mesh_iface> shall be aggregated or not.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
|
|
Date: May 2011
|
|
Contact: Antonio Quartulli <a@unstable.cc>
|
|
Description:
|
|
Indicates whether the data traffic going from a
|
|
wireless client to another wireless client will be
|
|
silently dropped. <vlan_subdir> is empty when referring
|
|
to the untagged lan.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/bonding
|
|
Date: June 2010
|
|
Contact: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Description:
|
|
Indicates whether the data traffic going through the
|
|
mesh will be sent using multiple interfaces at the
|
|
same time (if available).
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
|
|
Date: November 2011
|
|
Contact: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Description:
|
|
Indicates whether the bridge loop avoidance feature
|
|
is enabled. This feature detects and avoids loops
|
|
between the mesh and devices bridged with the soft
|
|
interface <mesh_iface>.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/fragmentation
|
|
Date: October 2010
|
|
Contact: Andreas Langer <an.langer@gmx.de>
|
|
Description:
|
|
Indicates whether the data traffic going through the
|
|
mesh will be fragmented or silently discarded if the
|
|
packet size exceeds the outgoing interface MTU.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the bandwidth which is propagated by this
|
|
node if gw_mode was set to 'server'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_mode
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the state of the gateway features. Can be
|
|
either 'off', 'client' or 'server'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the selection criteria this node will use
|
|
to choose a gateway if gw_mode was set to 'client'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
|
|
Date: Oct 2010
|
|
Contact: Linus Lüssing <linus.luessing@web.de>
|
|
Description:
|
|
Defines the penalty which will be applied to an
|
|
originator message's tq-field on every hop.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
|
|
Date: Nov 2013
|
|
Contact: Antonio Quartulli <a@unstable.cc>
|
|
Description:
|
|
Defines the isolation mark (and its bitmask) which
|
|
is used to classify clients as "isolated" by the
|
|
Extended Isolation feature.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
|
|
Date: Feb 2014
|
|
Contact: Linus Lüssing <linus.luessing@web.de>
|
|
Description:
|
|
Indicates whether multicast optimizations are enabled
|
|
or disabled. If set to zero then all nodes in the
|
|
mesh are going to use classic flooding for any
|
|
multicast packet with no optimizations.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/network_coding
|
|
Date: Nov 2012
|
|
Contact: Martin Hundeboll <martin@hundeboll.net>
|
|
Description:
|
|
Controls whether Network Coding (using some magic
|
|
to send fewer wifi packets but still the same
|
|
content) is enabled or not.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
|
|
Date: May 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the interval in milliseconds in which batman
|
|
sends its protocol messages.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/routing_algo
|
|
Date: Dec 2011
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the routing procotol this mesh instance
|
|
uses to find the optimal paths through the mesh.
|