0d8ba1a979
The 2nd serial port on the MPC8560 ADS was not being configured correctly and thus could not be used as a console. Updated the defconfig for the board to configure the proper SCC channel for the 2nd serial port. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
347 lines
10 KiB
C
347 lines
10 KiB
C
/*
|
|
* linux/drivers/serial/cpm_uart_cpm2.c
|
|
*
|
|
* Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
|
|
*
|
|
* Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
|
|
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
|
|
*
|
|
* Copyright (C) 2004 Freescale Semiconductor, Inc.
|
|
* (C) 2004 Intracom, S.A.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/serial_core.h>
|
|
#include <linux/kernel.h>
|
|
|
|
#include "cpm_uart.h"
|
|
|
|
/**************************************************************/
|
|
|
|
void cpm_line_cr_cmd(int line, int cmd)
|
|
{
|
|
volatile cpm_cpm2_t *cp = cpmp;
|
|
ulong val;
|
|
|
|
switch (line) {
|
|
case UART_SMC1:
|
|
val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SMC2:
|
|
val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC1:
|
|
val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC2:
|
|
val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC3:
|
|
val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC4:
|
|
val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
|
|
cmd) | CPM_CR_FLG;
|
|
break;
|
|
default:
|
|
return;
|
|
|
|
}
|
|
cp->cp_cpcr = val;
|
|
while (cp->cp_cpcr & CPM_CR_FLG) ;
|
|
}
|
|
|
|
void smc1_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
|
|
/* SMC1 is only on port D */
|
|
io->iop_ppard |= 0x00c00000;
|
|
io->iop_pdird |= 0x00400000;
|
|
io->iop_pdird &= ~0x00800000;
|
|
io->iop_psord &= ~0x00c00000;
|
|
|
|
/* Wire BRG1 to SMC1 */
|
|
cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
|
|
pinfo->brg = 1;
|
|
}
|
|
|
|
void smc2_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
|
|
/* SMC2 is only on port A */
|
|
io->iop_ppara |= 0x00c00000;
|
|
io->iop_pdira |= 0x00400000;
|
|
io->iop_pdira &= ~0x00800000;
|
|
io->iop_psora &= ~0x00c00000;
|
|
|
|
/* Wire BRG2 to SMC2 */
|
|
cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
|
|
pinfo->brg = 2;
|
|
}
|
|
|
|
void scc1_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
|
|
/* Use Port D for SCC1 instead of other functions. */
|
|
io->iop_ppard |= 0x00000003;
|
|
io->iop_psord &= ~0x00000001; /* Rx */
|
|
io->iop_psord |= 0x00000002; /* Tx */
|
|
io->iop_pdird &= ~0x00000001; /* Rx */
|
|
io->iop_pdird |= 0x00000002; /* Tx */
|
|
|
|
/* Wire BRG1 to SCC1 */
|
|
cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
|
|
cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
|
|
pinfo->brg = 1;
|
|
}
|
|
|
|
void scc2_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
/*
|
|
* STx GP3 uses the SCC2 secondary option pin assignment
|
|
* which this driver doesn't account for in the static
|
|
* pin assignments. This kind of board specific info
|
|
* really has to get out of the driver so boards can
|
|
* be supported in a sane fashion.
|
|
*/
|
|
#ifndef CONFIG_STX_GP3
|
|
#ifdef CONFIG_MPC8560_ADS
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
io->iop_ppard |= 0x00000018;
|
|
io->iop_psord &= ~0x00000008; /* Rx */
|
|
io->iop_psord &= ~0x00000010; /* Tx */
|
|
io->iop_pdird &= ~0x00000008; /* Rx */
|
|
io->iop_pdird |= 0x00000010; /* Tx */
|
|
#else
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
io->iop_pparb |= 0x008b0000;
|
|
io->iop_pdirb |= 0x00880000;
|
|
io->iop_psorb |= 0x00880000;
|
|
io->iop_pdirb &= ~0x00030000;
|
|
io->iop_psorb &= ~0x00030000;
|
|
#endif
|
|
#endif
|
|
cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
|
|
cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
|
|
pinfo->brg = 2;
|
|
}
|
|
|
|
void scc3_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
io->iop_pparb |= 0x008b0000;
|
|
io->iop_pdirb |= 0x00880000;
|
|
io->iop_psorb |= 0x00880000;
|
|
io->iop_pdirb &= ~0x00030000;
|
|
io->iop_psorb &= ~0x00030000;
|
|
cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
|
|
cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
|
|
pinfo->brg = 3;
|
|
}
|
|
|
|
void scc4_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
|
|
|
io->iop_ppard |= 0x00000600;
|
|
io->iop_psord &= ~0x00000600; /* Tx/Rx */
|
|
io->iop_pdird &= ~0x00000200; /* Rx */
|
|
io->iop_pdird |= 0x00000400; /* Tx */
|
|
|
|
cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
|
|
cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
|
|
pinfo->brg = 4;
|
|
}
|
|
|
|
/*
|
|
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
|
|
* receive buffer descriptors from dual port ram, and a character
|
|
* buffer area from host mem. If we are allocating for the console we need
|
|
* to do it from bootmem
|
|
*/
|
|
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
|
|
{
|
|
int dpmemsz, memsz;
|
|
u8 *dp_mem;
|
|
uint dp_offset;
|
|
u8 *mem_addr;
|
|
dma_addr_t dma_addr = 0;
|
|
|
|
pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
|
|
|
|
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
|
|
dp_offset = cpm_dpalloc(dpmemsz, 8);
|
|
if (IS_DPERR(dp_offset)) {
|
|
printk(KERN_ERR
|
|
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dp_mem = cpm_dpram_addr(dp_offset);
|
|
|
|
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
|
|
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
|
|
if (is_con)
|
|
mem_addr = alloc_bootmem(memsz);
|
|
else
|
|
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
|
|
GFP_KERNEL);
|
|
|
|
if (mem_addr == NULL) {
|
|
cpm_dpfree(dp_offset);
|
|
printk(KERN_ERR
|
|
"cpm_uart_cpm.c: could not allocate coherent memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pinfo->dp_addr = dp_offset;
|
|
pinfo->mem_addr = mem_addr;
|
|
pinfo->dma_addr = dma_addr;
|
|
|
|
pinfo->rx_buf = mem_addr;
|
|
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
|
|
* pinfo->rx_fifosize);
|
|
|
|
pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
|
|
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
|
|
{
|
|
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
|
|
pinfo->rx_fifosize) +
|
|
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
|
|
pinfo->tx_fifosize), pinfo->mem_addr,
|
|
pinfo->dma_addr);
|
|
|
|
cpm_dpfree(pinfo->dp_addr);
|
|
}
|
|
|
|
/* Setup any dynamic params in the uart desc */
|
|
int cpm_uart_init_portdesc(void)
|
|
{
|
|
pr_debug("CPM uart[-]:init portdesc\n");
|
|
|
|
cpm_uart_nr = 0;
|
|
#ifdef CONFIG_SERIAL_CPM_SMC1
|
|
cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
|
|
cpm_uart_ports[UART_SMC1].smcup =
|
|
(smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
|
|
cpm_uart_ports[UART_SMC1].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_smc[0];
|
|
cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
|
|
cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
|
cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SMC2
|
|
cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
|
|
cpm_uart_ports[UART_SMC2].smcup =
|
|
(smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
|
|
cpm_uart_ports[UART_SMC2].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_smc[1];
|
|
cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
|
|
cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
|
cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC1
|
|
cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
|
|
cpm_uart_ports[UART_SCC1].sccup =
|
|
(scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
|
|
cpm_uart_ports[UART_SCC1].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_scc[0];
|
|
cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC2
|
|
cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
|
|
cpm_uart_ports[UART_SCC2].sccup =
|
|
(scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
|
|
cpm_uart_ports[UART_SCC2].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_scc[1];
|
|
cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC3
|
|
cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
|
|
cpm_uart_ports[UART_SCC3].sccup =
|
|
(scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
|
|
cpm_uart_ports[UART_SCC3].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_scc[2];
|
|
cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC4
|
|
cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
|
|
cpm_uart_ports[UART_SCC4].sccup =
|
|
(scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
|
|
cpm_uart_ports[UART_SCC4].port.mapbase =
|
|
(unsigned long)&cpm2_immr->im_scc[3];
|
|
cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|