linux/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
Uwe Kleine-König 79abca2b39 drm/mipi-dsi: Make remove callback return void
All implementations return 0 and the return value of mipi_dsi_drv_remove()
is ignored anyhow.

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
2022-07-09 10:50:03 +02:00

288 lines
7.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2019, Michael Srba
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
struct s6e88a0_ams452ef01 {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset_gpio;
bool prepared;
};
static inline struct
s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel)
{
return container_of(panel, struct s6e88a0_ams452ef01, panel);
}
#define dsi_dcs_write_seq(dsi, seq...) do { \
static const u8 d[] = { seq }; \
int ret; \
ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
if (ret < 0) \
return ret; \
} while (0)
static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx)
{
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(5000, 6000);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
usleep_range(1000, 2000);
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(10000, 11000);
}
static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct device *dev = &dsi->dev;
int ret;
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands
dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
return ret;
}
msleep(120);
// set default brightness/gama
dsi_dcs_write_seq(dsi, 0xca,
0x01, 0x00, 0x01, 0x00, 0x01, 0x00, // V255 RR,GG,BB
0x80, 0x80, 0x80, // V203 R,G,B
0x80, 0x80, 0x80, // V151 R,G,B
0x80, 0x80, 0x80, // V87 R,G,B
0x80, 0x80, 0x80, // V51 R,G,B
0x80, 0x80, 0x80, // V35 R,G,B
0x80, 0x80, 0x80, // V23 R,G,B
0x80, 0x80, 0x80, // V11 R,G,B
0x6b, 0x68, 0x71, // V3 R,G,B
0x00, 0x00, 0x00); // V1 R,G,B
// set default Amoled Off Ratio
dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a);
dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage
dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update
dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
dev_err(dev, "Failed to set display on: %d\n", ret);
return ret;
}
return 0;
}
static int s6e88a0_ams452ef01_off(struct s6e88a0_ams452ef01 *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct device *dev = &dsi->dev;
int ret;
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
dev_err(dev, "Failed to set display off: %d\n", ret);
return ret;
}
msleep(35);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
return ret;
}
msleep(120);
return 0;
}
static int s6e88a0_ams452ef01_prepare(struct drm_panel *panel)
{
struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
struct device *dev = &ctx->dsi->dev;
int ret;
if (ctx->prepared)
return 0;
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret < 0) {
dev_err(dev, "Failed to enable regulators: %d\n", ret);
return ret;
}
s6e88a0_ams452ef01_reset(ctx);
ret = s6e88a0_ams452ef01_on(ctx);
if (ret < 0) {
dev_err(dev, "Failed to initialize panel: %d\n", ret);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
regulator_bulk_disable(ARRAY_SIZE(ctx->supplies),
ctx->supplies);
return ret;
}
ctx->prepared = true;
return 0;
}
static int s6e88a0_ams452ef01_unprepare(struct drm_panel *panel)
{
struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
struct device *dev = &ctx->dsi->dev;
int ret;
if (!ctx->prepared)
return 0;
ret = s6e88a0_ams452ef01_off(ctx);
if (ret < 0)
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
ctx->prepared = false;
return 0;
}
static const struct drm_display_mode s6e88a0_ams452ef01_mode = {
.clock = (540 + 88 + 4 + 20) * (960 + 14 + 2 + 8) * 60 / 1000,
.hdisplay = 540,
.hsync_start = 540 + 88,
.hsync_end = 540 + 88 + 4,
.htotal = 540 + 88 + 4 + 20,
.vdisplay = 960,
.vsync_start = 960 + 14,
.vsync_end = 960 + 14 + 2,
.vtotal = 960 + 14 + 2 + 8,
.width_mm = 56,
.height_mm = 100,
};
static int s6e88a0_ams452ef01_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &s6e88a0_ams452ef01_mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs s6e88a0_ams452ef01_panel_funcs = {
.unprepare = s6e88a0_ams452ef01_unprepare,
.prepare = s6e88a0_ams452ef01_prepare,
.get_modes = s6e88a0_ams452ef01_get_modes,
};
static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct s6e88a0_ams452ef01 *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->supplies[0].supply = "vdd3";
ctx->supplies[1].supply = "vci";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
ctx->supplies);
if (ret < 0) {
dev_err(dev, "Failed to get regulators: %d\n", ret);
return ret;
}
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
ret = PTR_ERR(ctx->reset_gpio);
dev_err(dev, "Failed to get reset-gpios: %d\n", ret);
return ret;
}
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
dsi->lanes = 2;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST;
drm_panel_init(&ctx->panel, dev, &s6e88a0_ams452ef01_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void s6e88a0_ams452ef01_remove(struct mipi_dsi_device *dsi)
{
struct s6e88a0_ams452ef01 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
}
static const struct of_device_id s6e88a0_ams452ef01_of_match[] = {
{ .compatible = "samsung,s6e88a0-ams452ef01" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, s6e88a0_ams452ef01_of_match);
static struct mipi_dsi_driver s6e88a0_ams452ef01_driver = {
.probe = s6e88a0_ams452ef01_probe,
.remove = s6e88a0_ams452ef01_remove,
.driver = {
.name = "panel-s6e88a0-ams452ef01",
.of_match_table = s6e88a0_ams452ef01_of_match,
},
};
module_mipi_dsi_driver(s6e88a0_ams452ef01_driver);
MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
MODULE_DESCRIPTION("MIPI-DSI based Panel Driver for AMS452EF01 AMOLED LCD with a S6E88A0 controller");
MODULE_LICENSE("GPL v2");