Linus Torvalds 0f002fddbe MIPS changes for v4.11
Miscellaneous:
  - Add IRQ stacks
  - Add cacheinfo support
  - Add "uzImage.bin" zboot target
  - Unify performance counter definitions
  - Export various (mainly assembly) symbols alongside their
    definitions
  - Audit and remove unnecessary uses of module.h
 
 kexec & kdump:
  - Lots of improvements and fixes
  - Add correct copy_regs implementations
  - Add debug logging of new kernel information
 
 Security:
  - Use Makefile.postlink to insert relocations into vmlinux
  - Provide plat_post_relocation hook (used for Octeon KASLR)
  - Add support for tuning mmap randomisation
  - Relocate DTB
 
 microMIPS:
  - A load of unwind fixes
  - Add some missing .insn to fix link errors
 
 MIPSr6:
  - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
  - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
  - Allow pre-r6 emulation on SMP MIPSr6 kernels
 
 Cache management:
  - Treat physically indexed dcache as non-aliasing
  - Add return errors to protected cache ops for KVM
  - CM3: Ensure L1 & L2 cache ECC checking matches
  - CM3: Indicate inclusive caches
  - I6400: Treat dcache as physically indexed
 
 Memory management:
  - Ensure bootmem doesn't corrupt reserved memory
  - Export some TLB exception generation functions for KVM
 
 OF
  - NULL check initial_boot_params before use in of_scan_flat_dt()
  - Fix unaligned access in of_alias_scan()
 
 SMP:
  - CPS: Don't BUG if a CPU fails to start
 
 Other fixes
  - Fix longstanding 64-bit IP checksum carry bug
  - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
  - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
    CPU_FREQ_STAT,SCSI_DH changes
  - Disable certain builtin compiler options, stack-check (whole
    kernel), asynchronous-unwind-tables (VDSO).
  - A bunch of build fixes from kernelci.org testing
  - Various other minor cleanups & corrections
 
 BMIPS:
  - Migrate interrupts during bmips_cpu_disable
  - BCM47xx: Add Luxul devices
  - BCM47xx: Fix Asus WL-500W button inversion
  - BCM7xxx: Add SPI device nodes
 
 Generic (multiplatform):
  - Add kexec DTB passing
  - Fix big endian
  - Add cpp_its_S in ksym_dep_filter to silence build warning
 
 IP22:
  - Reformat inline assembler code to modern standards
  - Fix binutils 2.25 build error
 
 IP27:
  - Fix duplicate CAC_BASE definition build error
  - Disable qlge driver to workaround broken compiler
 
 Lantiq:
  - Refresh defconfig and activate more drivers
  - Lock DMA register access
  - Fix cascading IRQ setup
  - Fix build of VPE loader
  - xway: Fix ethernet packet header corruption over reboot
 
 Loongson1
  - Add watchdog support
  - 1B: Reduce DEFAULT_MEMSIZE to 64MB
  - 1B: Change OSC clock name to match rest of kernel
  - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
 
 Octeon:
  - Add KASLR support
  - Support Octeon III USB controller
  - Fix large copy_from_user corner case
  - Enable devtmpfs in defconfig
 
 Netlogic:
  - Fix non-default XLR build error due to netlogic,xlp-pic code
  - Fix assembler warning from smpboot.S
 
 pic32mzda:
  - Fix linker error when early printk is disabled
 
 Pistachio:
  - Add base device tree
  - Add Ci40 "Marduk" device tree
 
 Ralink:
  - Support raw appended DTB
  - Add missing I2C & I2S clocks
  - Add missing pinmux and fix pinmux function name typo
  - Add missing clk_round_rate()
  - Clean up prom_init()
  - MT7621: Set SoC type
  - MT7621: Support highmem
 
 TXx9:
  - Modernize printing of kernel messages and resolve KERN_CONT fallout
  - 7segled: use permission-specific DEVICE_ATTR variants
 
 XilFPGA:
  - Add IRQ controller and UART IRQ
  - Add AXI I2C and emaclite to DT & defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYp6EBAAoJEGwLaZPeOHZ6HdMQAJTaWMET5SFuERSQKi6xsgRp
 +ZQ8eHWG6AlERXw56EOuo69qEKvvTWfYR8cBZmePxbrP0cBREcT7Thz8oX4q4IGs
 ZT3jCLmHb4dSu4Pp5nAVVPb7XaJ6InJr/5V88jGECO+zvdIlsoOj8e13gypl0hsw
 gxEiYHp3kSHVeBTmiCo5KasWtY36vkpl0CVfFIHVXQQulHPWdYGSamdhyCVHWvJc
 l1fGJPi9f5KEJO6ys6bZUCPQGnpj09d3muw2FR0SA7i1M4TWw5t6HU6yt81mgxQD
 TJH/lRKmDkfbv+2sOlz2NSHyilyuApY3dlN8BQX7eG4UFsvbZnZhAvGQTfZzelku
 6pJXYHdeZOlYFDHFfZRKyT6cOnIZNqWlcoouds1GoHQZaUUNlGfVRVzJ1KGJoHa4
 vBCIXOUb4KCCc1ylykzWeCOOalPlNVKxDn9vIBrhtld1CbgRaOzUFFlU8YJkYACB
 k5W0XqFA2tth7cttLIc7H/VJUHwHfaVUwNbbNUWDKiUOrLtpIGtfNh2EPrFPHPA8
 N7gsQ5gDDiASVHcreEnMqOQLdFpciFLTo0kXC9zXT4a9Q5fD0ILC02xzJCqCXRlG
 KgJBBOfIavug9ZQO3vAaz8AyMNe+XCeMdJf+ZtEMnuuk4CqxRBixxu37fXEPv/hX
 QUNLUk3kqV2yJPrkhFqJ
 =maZx
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "Here's the main MIPS pull request for 4.11.

  It contains a few new features such as IRQ stacks, cacheinfo support,
  and KASLR for Octeon CPUs, and a variety of smaller improvements and
  fixes including devicetree additions, kexec cleanups, microMIPS stack
  unwinding fixes, and a bunch of build fixes to clean up continuous
  integration builds.

  Its all been in linux-next for at least a couple of days, most of it
  far longer.

  Miscellaneous:
   - Add IRQ stacks
   - Add cacheinfo support
   - Add "uzImage.bin" zboot target
   - Unify performance counter definitions
   - Export various (mainly assembly) symbols alongside their
     definitions
   - Audit and remove unnecessary uses of module.h

  kexec & kdump:
   - Lots of improvements and fixes
   - Add correct copy_regs implementations
   - Add debug logging of new kernel information

  Security:
   - Use Makefile.postlink to insert relocations into vmlinux
   - Provide plat_post_relocation hook (used for Octeon KASLR)
   - Add support for tuning mmap randomisation
   - Relocate DTB

  microMIPS:
   - A load of unwind fixes
   - Add some missing .insn to fix link errors

  MIPSr6:
   - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
   - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
   - Allow pre-r6 emulation on SMP MIPSr6 kernels

  Cache management:
   - Treat physically indexed dcache as non-aliasing
   - Add return errors to protected cache ops for KVM
   - CM3: Ensure L1 & L2 cache ECC checking matches
   - CM3: Indicate inclusive caches
   - I6400: Treat dcache as physically indexed

  Memory management:
   - Ensure bootmem doesn't corrupt reserved memory
   - Export some TLB exception generation functions for KVM

  OF:
   - NULL check initial_boot_params before use in of_scan_flat_dt()
   - Fix unaligned access in of_alias_scan()

  SMP:
   - CPS: Don't BUG if a CPU fails to start

  Other fixes:
   - Fix longstanding 64-bit IP checksum carry bug
   - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
   - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
     CPU_FREQ_STAT,SCSI_DH changes
   - Disable certain builtin compiler options, stack-check (whole
     kernel), asynchronous-unwind-tables (VDSO).
   - A bunch of build fixes from kernelci.org testing
   - Various other minor cleanups & corrections

  BMIPS:
   - Migrate interrupts during bmips_cpu_disable
   - BCM47xx: Add Luxul devices
   - BCM47xx: Fix Asus WL-500W button inversion
   - BCM7xxx: Add SPI device nodes

  Generic (multiplatform):
   - Add kexec DTB passing
   - Fix big endian
   - Add cpp_its_S in ksym_dep_filter to silence build warning

  IP22:
   - Reformat inline assembler code to modern standards
   - Fix binutils 2.25 build error

  IP27:
   - Fix duplicate CAC_BASE definition build error
   - Disable qlge driver to workaround broken compiler

  Lantiq:
   - Refresh defconfig and activate more drivers
   - Lock DMA register access
   - Fix cascading IRQ setup
   - Fix build of VPE loader
   - xway: Fix ethernet packet header corruption over reboot

  Loongson1
   - Add watchdog support
   - 1B: Reduce DEFAULT_MEMSIZE to 64MB
   - 1B: Change OSC clock name to match rest of kernel
   - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB

  Octeon:
   - Add KASLR support
   - Support Octeon III USB controller
   - Fix large copy_from_user corner case
   - Enable devtmpfs in defconfig

  Netlogic:
   - Fix non-default XLR build error due to netlogic,xlp-pic code
   - Fix assembler warning from smpboot.S

  pic32mzda:
   - Fix linker error when early printk is disabled

  Pistachio:
   - Add base device tree
   - Add Ci40 "Marduk" device tree

  Ralink:
   - Support raw appended DTB
   - Add missing I2C & I2S clocks
   - Add missing pinmux and fix pinmux function name typo
   - Add missing clk_round_rate()
   - Clean up prom_init()
   - MT7621: Set SoC type
   - MT7621: Support highmem

  TXx9:
   - Modernize printing of kernel messages and resolve KERN_CONT fallout
   - 7segled: use permission-specific DEVICE_ATTR variants

  XilFPGA:
   - Add IRQ controller and UART IRQ
   - Add AXI I2C and emaclite to DT & defconfig"

* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
  MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
  MIPS: BCM47XX: Fix button inversion for Asus WL-500W
  MIPS: DTS: Add img directory to Makefile
  MIPS: ip27: Disable qlge driver in defconfig
  MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
  MIPS: Lantiq: Keep ethernet enabled during boot
  MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
  MIPS: Fix special case in 64 bit IP checksumming.
  MIPS: OCTEON: Enable DEVTMPFS
  MIPS: lantiq: Set physical_memsize
  MIPS: sysmips: Remove duplicated include from syscall.c
  Kbuild: Add cpp_its_S in ksym_dep_filter
  MIPS: Audit and remove any unnecessary uses of module.h
  MIPS: Unify perf counter register definitions
  MIPS: Disable stack checks on MIPS kernels
  MIPS: OCTEON: Platform support for OCTEON III USB controller
  MIPS: Lantiq: Fix cascaded IRQ setup
  MIPS: sync-r4k: Fix KERN_CONT fallout
  MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
  MIPS: Fix distclean with Makefile.postlink
  ...
2017-02-21 14:21:11 -08:00
2017-02-21 14:21:11 -08:00
2017-02-21 10:57:33 -08:00
2017-02-21 14:21:11 -08:00
2017-02-21 14:21:11 -08:00
2017-02-21 10:57:33 -08:00
2017-02-21 14:21:11 -08:00
2017-02-20 17:55:15 -08:00
2017-01-17 15:04:59 +01:00
2017-02-13 12:24:56 -05:00
2016-05-23 17:04:14 -07:00
2017-02-21 14:21:11 -08:00

Linux kernel
============

This file was moved to Documentation/admin-guide/README.rst

Please notice that there are several guides for kernel developers and users.
These guides can be rendered in a number of formats, like HTML and PDF.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
See Documentation/00-INDEX for a list of what is contained in each file.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 5.7 GiB
Languages
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%