a894c6dd56
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for ARM Ltd. platforms to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. For MPS2 we only specify one clock so far, but the binding requires two clocks to be named. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. So since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Link: https://lore.kernel.org/r/20200828130602.42203-8-andre.przywara@arm.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
692 lines
15 KiB
Plaintext
692 lines
15 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ARM Ltd. Versatile Express
|
|
*
|
|
* CoreTile Express A15x2 A7x3
|
|
* Cortex-A15_A7 MPCore (V2P-CA15_A7)
|
|
*
|
|
* HBI-0249A
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "vexpress-v2m-rs1.dtsi"
|
|
|
|
/ {
|
|
model = "V2P-CA15_CA7";
|
|
arm,hbi = <0x249>;
|
|
arm,vexpress,site = <0xf>;
|
|
compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
chosen { };
|
|
|
|
aliases {
|
|
serial0 = &v2m_serial0;
|
|
serial1 = &v2m_serial1;
|
|
serial2 = &v2m_serial2;
|
|
serial3 = &v2m_serial3;
|
|
i2c0 = &v2m_i2c_dvi;
|
|
i2c1 = &v2m_i2c_pcie;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
cci-control-port = <&cci_control1>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <990>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
cci-control-port = <&cci_control1>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <990>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
cpu4: cpu@4 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x102>;
|
|
cci-control-port = <&cci_control2>;
|
|
cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
|
|
capacity-dmips-mhz = <516>;
|
|
dynamic-power-coefficient = <133>;
|
|
};
|
|
|
|
idle-states {
|
|
CLUSTER_SLEEP_BIG: cluster-sleep-big {
|
|
compatible = "arm,idle-state";
|
|
local-timer-stop;
|
|
entry-latency-us = <1000>;
|
|
exit-latency-us = <700>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
|
|
CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
|
|
compatible = "arm,idle-state";
|
|
local-timer-stop;
|
|
entry-latency-us = <1000>;
|
|
exit-latency-us = <500>;
|
|
min-residency-us = <2500>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x80000000 0 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* Chipselect 2 is physically at 0x18000000 */
|
|
vram: vram@18000000 {
|
|
/* 8 MB of designated video RAM */
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x18000000 0 0x00800000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
wdt@2a490000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0 0x2a490000 0 0x1000>;
|
|
interrupts = <0 98 4>;
|
|
clocks = <&oscclk6a>, <&oscclk6a>;
|
|
clock-names = "wdog_clk", "apb_pclk";
|
|
};
|
|
|
|
hdlcd@2b000000 {
|
|
compatible = "arm,hdlcd";
|
|
reg = <0 0x2b000000 0 0x1000>;
|
|
interrupts = <0 85 4>;
|
|
clocks = <&hdlcd_clk>;
|
|
clock-names = "pxlclk";
|
|
};
|
|
|
|
memory-controller@2b0a0000 {
|
|
compatible = "arm,pl341", "arm,primecell";
|
|
reg = <0 0x2b0a0000 0 0x1000>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gic: interrupt-controller@2c001000 {
|
|
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0 0x2c001000 0 0x1000>,
|
|
<0 0x2c002000 0 0x2000>,
|
|
<0 0x2c004000 0 0x2000>,
|
|
<0 0x2c006000 0 0x2000>;
|
|
interrupts = <1 9 0xf04>;
|
|
};
|
|
|
|
cci@2c090000 {
|
|
compatible = "arm,cci-400";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0 0x2c090000 0 0x1000>;
|
|
ranges = <0x0 0x0 0x2c090000 0x10000>;
|
|
|
|
cci_control1: slave-if@4000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x4000 0x1000>;
|
|
};
|
|
|
|
cci_control2: slave-if@5000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x5000 0x1000>;
|
|
};
|
|
|
|
pmu@9000 {
|
|
compatible = "arm,cci-400-pmu,r0";
|
|
reg = <0x9000 0x5000>;
|
|
interrupts = <0 105 4>,
|
|
<0 101 4>,
|
|
<0 102 4>,
|
|
<0 103 4>,
|
|
<0 104 4>;
|
|
};
|
|
};
|
|
|
|
memory-controller@7ffd0000 {
|
|
compatible = "arm,pl354", "arm,primecell";
|
|
reg = <0 0x7ffd0000 0 0x1000>;
|
|
interrupts = <0 86 4>,
|
|
<0 87 4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
dma@7ff00000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0 0x7ff00000 0 0x1000>;
|
|
interrupts = <0 92 4>,
|
|
<0 88 4>,
|
|
<0 89 4>,
|
|
<0 90 4>,
|
|
<0 91 4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
scc@7fff0000 {
|
|
compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
|
|
reg = <0 0x7fff0000 0 0x1000>;
|
|
interrupts = <0 95 4>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
};
|
|
|
|
pmu-a15 {
|
|
compatible = "arm,cortex-a15-pmu";
|
|
interrupts = <0 68 4>,
|
|
<0 69 4>;
|
|
interrupt-affinity = <&cpu0>,
|
|
<&cpu1>;
|
|
};
|
|
|
|
pmu-a7 {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <0 128 4>,
|
|
<0 129 4>,
|
|
<0 130 4>;
|
|
interrupt-affinity = <&cpu2>,
|
|
<&cpu3>,
|
|
<&cpu4>;
|
|
};
|
|
|
|
oscclk6a: oscclk6a {
|
|
/* Reference 24MHz clock */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "oscclk6a";
|
|
};
|
|
|
|
dcc {
|
|
compatible = "arm,vexpress,config-bus";
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
oscclk0 {
|
|
/* A15 PLL 0 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk0";
|
|
};
|
|
|
|
oscclk1 {
|
|
/* A15 PLL 1 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 1>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk1";
|
|
};
|
|
|
|
oscclk2 {
|
|
/* A7 PLL 0 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 2>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk2";
|
|
};
|
|
|
|
oscclk3 {
|
|
/* A7 PLL 1 reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 3>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk3";
|
|
};
|
|
|
|
oscclk4 {
|
|
/* External AXI master clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 4>;
|
|
freq-range = <20000000 40000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk4";
|
|
};
|
|
|
|
hdlcd_clk: oscclk5 {
|
|
/* HDLCD PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 5>;
|
|
freq-range = <23750000 165000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk5";
|
|
};
|
|
|
|
smbclk: oscclk6 {
|
|
/* Static memory controller clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 6>;
|
|
freq-range = <20000000 40000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk6";
|
|
};
|
|
|
|
oscclk7 {
|
|
/* SYS PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 7>;
|
|
freq-range = <17000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk7";
|
|
};
|
|
|
|
oscclk8 {
|
|
/* DDR2 PLL reference clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 8>;
|
|
freq-range = <20000000 50000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk8";
|
|
};
|
|
|
|
volt-a15 {
|
|
/* A15 CPU core voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 0>;
|
|
regulator-name = "A15 Vcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
label = "A15 Vcore";
|
|
};
|
|
|
|
volt-a7 {
|
|
/* A7 CPU core voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 1>;
|
|
regulator-name = "A7 Vcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
label = "A7 Vcore";
|
|
};
|
|
|
|
amp-a15 {
|
|
/* Total current for the two A15 cores */
|
|
compatible = "arm,vexpress-amp";
|
|
arm,vexpress-sysreg,func = <3 0>;
|
|
label = "A15 Icore";
|
|
};
|
|
|
|
amp-a7 {
|
|
/* Total current for the three A7 cores */
|
|
compatible = "arm,vexpress-amp";
|
|
arm,vexpress-sysreg,func = <3 1>;
|
|
label = "A7 Icore";
|
|
};
|
|
|
|
temp-dcc {
|
|
/* DCC internal temperature */
|
|
compatible = "arm,vexpress-temp";
|
|
arm,vexpress-sysreg,func = <4 0>;
|
|
label = "DCC";
|
|
};
|
|
|
|
power-a15 {
|
|
/* Total power for the two A15 cores */
|
|
compatible = "arm,vexpress-power";
|
|
arm,vexpress-sysreg,func = <12 0>;
|
|
label = "A15 Pcore";
|
|
};
|
|
|
|
power-a7 {
|
|
/* Total power for the three A7 cores */
|
|
compatible = "arm,vexpress-power";
|
|
arm,vexpress-sysreg,func = <12 1>;
|
|
label = "A7 Pcore";
|
|
};
|
|
|
|
energy-a15 {
|
|
/* Total energy for the two A15 cores */
|
|
compatible = "arm,vexpress-energy";
|
|
arm,vexpress-sysreg,func = <13 0>, <13 1>;
|
|
label = "A15 Jcore";
|
|
};
|
|
|
|
energy-a7 {
|
|
/* Total energy for the three A7 cores */
|
|
compatible = "arm,vexpress-energy";
|
|
arm,vexpress-sysreg,func = <13 2>, <13 3>;
|
|
label = "A7 Jcore";
|
|
};
|
|
};
|
|
|
|
etb@20010000 {
|
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
|
reg = <0 0x20010000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
in-ports {
|
|
port {
|
|
etb_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@20030000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0 0x20030000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
in-ports {
|
|
port {
|
|
tpiu_in_port: endpoint {
|
|
remote-endpoint = <&replicator_out_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator {
|
|
/* non-configurable replicators don't show up on the
|
|
* AMBA bus. As such no need to add "arm,primecell".
|
|
*/
|
|
compatible = "arm,coresight-static-replicator";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out_port0: endpoint {
|
|
remote-endpoint = <&etb_in_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out_port1: endpoint {
|
|
remote-endpoint = <&tpiu_in_port>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
replicator_in_port0: endpoint {
|
|
remote-endpoint = <&funnel_out_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@20040000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0 0x20040000 0 0x1000>;
|
|
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
funnel_out_port0: endpoint {
|
|
remote-endpoint =
|
|
<&replicator_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel_in_port0: endpoint {
|
|
remote-endpoint = <&ptm0_out_port>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel_in_port1: endpoint {
|
|
remote-endpoint = <&ptm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
funnel_in_port2: endpoint {
|
|
remote-endpoint = <&etm0_out_port>;
|
|
};
|
|
};
|
|
|
|
/* Input port #3 is for ITM, not supported here */
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
funnel_in_port4: endpoint {
|
|
remote-endpoint = <&etm1_out_port>;
|
|
};
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel_in_port5: endpoint {
|
|
remote-endpoint = <&etm2_out_port>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@2201c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2201c000 0 0x1000>;
|
|
|
|
cpu = <&cpu0>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
ptm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ptm@2201d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2201d000 0 0x1000>;
|
|
|
|
cpu = <&cpu1>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
ptm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203c000 0 0x1000>;
|
|
|
|
cpu = <&cpu2>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm0_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203d000 0 0x1000>;
|
|
|
|
cpu = <&cpu3>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm1_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@2203e000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0 0x2203e000 0 0x1000>;
|
|
|
|
cpu = <&cpu4>;
|
|
clocks = <&oscclk6a>;
|
|
clock-names = "apb_pclk";
|
|
out-ports {
|
|
port {
|
|
etm2_out_port: endpoint {
|
|
remote-endpoint = <&funnel_in_port5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
smb: bus@8000000 {
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0x08000000 0x04000000>,
|
|
<1 0 0 0x14000000 0x04000000>,
|
|
<2 0 0 0x18000000 0x04000000>,
|
|
<3 0 0 0x1c000000 0x04000000>,
|
|
<4 0 0 0x0c000000 0x04000000>,
|
|
<5 0 0 0x10000000 0x04000000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 63>;
|
|
interrupt-map = <0 0 0 &gic 0 0 4>,
|
|
<0 0 1 &gic 0 1 4>,
|
|
<0 0 2 &gic 0 2 4>,
|
|
<0 0 3 &gic 0 3 4>,
|
|
<0 0 4 &gic 0 4 4>,
|
|
<0 0 5 &gic 0 5 4>,
|
|
<0 0 6 &gic 0 6 4>,
|
|
<0 0 7 &gic 0 7 4>,
|
|
<0 0 8 &gic 0 8 4>,
|
|
<0 0 9 &gic 0 9 4>,
|
|
<0 0 10 &gic 0 10 4>,
|
|
<0 0 11 &gic 0 11 4>,
|
|
<0 0 12 &gic 0 12 4>,
|
|
<0 0 13 &gic 0 13 4>,
|
|
<0 0 14 &gic 0 14 4>,
|
|
<0 0 15 &gic 0 15 4>,
|
|
<0 0 16 &gic 0 16 4>,
|
|
<0 0 17 &gic 0 17 4>,
|
|
<0 0 18 &gic 0 18 4>,
|
|
<0 0 19 &gic 0 19 4>,
|
|
<0 0 20 &gic 0 20 4>,
|
|
<0 0 21 &gic 0 21 4>,
|
|
<0 0 22 &gic 0 22 4>,
|
|
<0 0 23 &gic 0 23 4>,
|
|
<0 0 24 &gic 0 24 4>,
|
|
<0 0 25 &gic 0 25 4>,
|
|
<0 0 26 &gic 0 26 4>,
|
|
<0 0 27 &gic 0 27 4>,
|
|
<0 0 28 &gic 0 28 4>,
|
|
<0 0 29 &gic 0 29 4>,
|
|
<0 0 30 &gic 0 30 4>,
|
|
<0 0 31 &gic 0 31 4>,
|
|
<0 0 32 &gic 0 32 4>,
|
|
<0 0 33 &gic 0 33 4>,
|
|
<0 0 34 &gic 0 34 4>,
|
|
<0 0 35 &gic 0 35 4>,
|
|
<0 0 36 &gic 0 36 4>,
|
|
<0 0 37 &gic 0 37 4>,
|
|
<0 0 38 &gic 0 38 4>,
|
|
<0 0 39 &gic 0 39 4>,
|
|
<0 0 40 &gic 0 40 4>,
|
|
<0 0 41 &gic 0 41 4>,
|
|
<0 0 42 &gic 0 42 4>;
|
|
};
|
|
|
|
site2: hsb@40000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x40000000 0x3fef0000>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 3>;
|
|
interrupt-map = <0 0 &gic 0 36 4>,
|
|
<0 1 &gic 0 37 4>,
|
|
<0 2 &gic 0 38 4>,
|
|
<0 3 &gic 0 39 4>;
|
|
};
|
|
};
|
|
|
|
&nor_flash {
|
|
/*
|
|
* Unfortunately, accessing the flash disturbs the CPU idle states
|
|
* (suspend) and CPU hotplug of this platform. For this reason, flash
|
|
* hardware access is disabled by default on this platform alone.
|
|
*/
|
|
status = "disabled";
|
|
};
|