d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
196 lines
4.4 KiB
C
196 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MXC6255 - MEMSIC orientation sensing accelerometer
|
|
*
|
|
* Copyright (c) 2015, Intel Corporation.
|
|
*
|
|
* IIO driver for MXC6255 (7-bit I2C slave address 0x15).
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define MXC6255_DRV_NAME "mxc6255"
|
|
#define MXC6255_REGMAP_NAME "mxc6255_regmap"
|
|
|
|
#define MXC6255_REG_XOUT 0x00
|
|
#define MXC6255_REG_YOUT 0x01
|
|
#define MXC6255_REG_CHIP_ID 0x08
|
|
|
|
#define MXC6255_CHIP_ID 0x05
|
|
|
|
/*
|
|
* MXC6255 has only one measurement range: +/- 2G.
|
|
* The acceleration output is an 8-bit value.
|
|
*
|
|
* Scale is calculated as follows:
|
|
* (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829
|
|
*
|
|
* Scale value for +/- 2G measurement range
|
|
*/
|
|
#define MXC6255_SCALE 153829
|
|
|
|
enum mxc6255_axis {
|
|
AXIS_X,
|
|
AXIS_Y,
|
|
};
|
|
|
|
struct mxc6255_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static int mxc6255_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct mxc6255_data *data = iio_priv(indio_dev);
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = regmap_read(data->regmap, chan->address, ®);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error reading reg %lu\n", chan->address);
|
|
return ret;
|
|
}
|
|
|
|
*val = sign_extend32(reg, 7);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = MXC6255_SCALE;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info mxc6255_info = {
|
|
.read_raw = mxc6255_read_raw,
|
|
};
|
|
|
|
#define MXC6255_CHANNEL(_axis, reg) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##_axis, \
|
|
.address = reg, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec mxc6255_channels[] = {
|
|
MXC6255_CHANNEL(X, MXC6255_REG_XOUT),
|
|
MXC6255_CHANNEL(Y, MXC6255_REG_YOUT),
|
|
};
|
|
|
|
static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MXC6255_REG_XOUT:
|
|
case MXC6255_REG_YOUT:
|
|
case MXC6255_REG_CHIP_ID:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config mxc6255_regmap_config = {
|
|
.name = MXC6255_REGMAP_NAME,
|
|
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.readable_reg = mxc6255_is_readable_reg,
|
|
};
|
|
|
|
static int mxc6255_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mxc6255_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap *regmap;
|
|
unsigned int chip_id;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "Error initializing regmap\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
data->regmap = regmap;
|
|
|
|
indio_dev->name = MXC6255_DRV_NAME;
|
|
indio_dev->channels = mxc6255_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &mxc6255_info;
|
|
|
|
ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error reading chip id %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if ((chip_id & 0x1f) != MXC6255_CHIP_ID) {
|
|
dev_err(&client->dev, "Invalid chip id %x\n", chip_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "Chip id %x\n", chip_id);
|
|
|
|
ret = devm_iio_device_register(&client->dev, indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Could not register IIO device\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id mxc6255_acpi_match[] = {
|
|
{"MXC6225", 0},
|
|
{"MXC6255", 0},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match);
|
|
|
|
static const struct i2c_device_id mxc6255_id[] = {
|
|
{"mxc6225", 0},
|
|
{"mxc6255", 0},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxc6255_id);
|
|
|
|
static struct i2c_driver mxc6255_driver = {
|
|
.driver = {
|
|
.name = MXC6255_DRV_NAME,
|
|
.acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
|
|
},
|
|
.probe = mxc6255_probe,
|
|
.id_table = mxc6255_id,
|
|
};
|
|
|
|
module_i2c_driver(mxc6255_driver);
|
|
|
|
MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>");
|
|
MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver");
|
|
MODULE_LICENSE("GPL v2");
|