4e1d96306d
Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6gicARHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foj3ig//XRAAHRSfzXFpvYxITVKDIGwP/giYdp91 OflGw/0aOZFExr72ENLmCArXZPOT2qAZyNNoDNvuJ9SkcVDf4bT3w9gYwWtJ1sd7 Hhh+1JpPspSo6vS85FMjm37UDfSbmYqB6wC57cZ5pKQIiJwi6W2hGsyOoOXmfLLc 57d3mlg4g3KLl9Hl4UTU84gE1ushKQgNxVH21Y71pOTa8p+xbWWcspWjR2Jf+kVZ qPr2+2rP/AjeAVLu9SKfdBiczYQCNR3uFWKkOKsBE9fq3sbcN6NT5DktrSJUH+qU zfUGmShCEP908/9fARazXQZcTOX1tIUOnrpHG9l54GNPh3S2Qk9xGaZxvQy5sguC AmC4p+MaIMrMcgWMk9po+nE5INJq7HBV/0jnADG307wEhFrKrjh/2PtP4f9k/Mcv sHB7K1+dcJAUwFb5gccdDBfmKMnwfnGS8OFGLXZZKBIDqSvptmIs/pmavjEPgqhV GwGTDPyZKeyDnyhTXGafxii03Q2I62Zte5l4jcZ+q8Q4UMxQovEkX6IvUpXwA0Kk eoxedbgdvzxrDNiNrXa0k6CLzqSQW+aVHgJG+HEig4IXQse8zXb11HCs35zq5r4j JI2UjLk3zUHLiNR/Ir9fKAbPwWSWv3IWkfmFEEUWvUFjM+Xot1Hg+61vBTFKo4iK EIqqPZmd5Mk= =DyTF -----END PGP SIGNATURE----- Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
206 lines
4.5 KiB
C
206 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* STMicroelectronics accelerometers driver
|
|
*
|
|
* Copyright 2012-2013 STMicroelectronics Inc.
|
|
*
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/property.h>
|
|
|
|
#include <linux/iio/common/st_sensors_i2c.h>
|
|
#include "st_accel.h"
|
|
|
|
static const struct of_device_id st_accel_of_match[] = {
|
|
{
|
|
/* An older compatible */
|
|
.compatible = "st,lis3lv02d",
|
|
.data = LIS3LV02DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis3lv02dl-accel",
|
|
.data = LIS3LV02DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm303dlh-accel",
|
|
.data = LSM303DLH_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm303dlhc-accel",
|
|
.data = LSM303DLHC_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis3dh-accel",
|
|
.data = LIS3DH_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm330d-accel",
|
|
.data = LSM330D_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm330dl-accel",
|
|
.data = LSM330DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm330dlc-accel",
|
|
.data = LSM330DLC_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis331dl-accel",
|
|
.data = LIS331DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis331dlh-accel",
|
|
.data = LIS331DLH_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm303dl-accel",
|
|
.data = LSM303DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm303dlm-accel",
|
|
.data = LSM303DLM_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm330-accel",
|
|
.data = LSM330_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lsm303agr-accel",
|
|
.data = LSM303AGR_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis2dh12-accel",
|
|
.data = LIS2DH12_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,h3lis331dl-accel",
|
|
.data = H3LIS331DL_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis3l02dq",
|
|
.data = LIS3L02DQ_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lng2dm-accel",
|
|
.data = LNG2DM_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis2dw12",
|
|
.data = LIS2DW12_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis3de",
|
|
.data = LIS3DE_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis2de12",
|
|
.data = LIS2DE12_ACCEL_DEV_NAME,
|
|
},
|
|
{
|
|
.compatible = "st,lis2hh12",
|
|
.data = LIS2HH12_ACCEL_DEV_NAME,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, st_accel_of_match);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id st_accel_acpi_match[] = {
|
|
{"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME},
|
|
{"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id st_accel_id_table[] = {
|
|
{ LSM303DLH_ACCEL_DEV_NAME },
|
|
{ LSM303DLHC_ACCEL_DEV_NAME },
|
|
{ LIS3DH_ACCEL_DEV_NAME },
|
|
{ LSM330D_ACCEL_DEV_NAME },
|
|
{ LSM330DL_ACCEL_DEV_NAME },
|
|
{ LSM330DLC_ACCEL_DEV_NAME },
|
|
{ LIS331DLH_ACCEL_DEV_NAME },
|
|
{ LSM303DL_ACCEL_DEV_NAME },
|
|
{ LSM303DLM_ACCEL_DEV_NAME },
|
|
{ LSM330_ACCEL_DEV_NAME },
|
|
{ LSM303AGR_ACCEL_DEV_NAME },
|
|
{ LIS2DH12_ACCEL_DEV_NAME },
|
|
{ LIS3L02DQ_ACCEL_DEV_NAME },
|
|
{ LNG2DM_ACCEL_DEV_NAME },
|
|
{ H3LIS331DL_ACCEL_DEV_NAME },
|
|
{ LIS331DL_ACCEL_DEV_NAME },
|
|
{ LIS3LV02DL_ACCEL_DEV_NAME },
|
|
{ LIS2DW12_ACCEL_DEV_NAME },
|
|
{ LIS3DE_ACCEL_DEV_NAME },
|
|
{ LIS2DE12_ACCEL_DEV_NAME },
|
|
{ LIS2HH12_ACCEL_DEV_NAME },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
|
|
|
|
static int st_accel_i2c_probe(struct i2c_client *client)
|
|
{
|
|
const struct st_sensor_settings *settings;
|
|
struct st_sensor_data *adata;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
st_sensors_dev_name_probe(&client->dev, client->name, sizeof(client->name));
|
|
|
|
settings = st_accel_get_settings(client->name);
|
|
if (!settings) {
|
|
dev_err(&client->dev, "device name %s not recognized.\n",
|
|
client->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
adata = iio_priv(indio_dev);
|
|
adata->sensor_settings = (struct st_sensor_settings *)settings;
|
|
|
|
ret = st_sensors_i2c_configure(indio_dev, client);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = st_accel_common_probe(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st_accel_i2c_remove(struct i2c_client *client)
|
|
{
|
|
st_accel_common_remove(i2c_get_clientdata(client));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver st_accel_driver = {
|
|
.driver = {
|
|
.name = "st-accel-i2c",
|
|
.of_match_table = st_accel_of_match,
|
|
.acpi_match_table = ACPI_PTR(st_accel_acpi_match),
|
|
},
|
|
.probe_new = st_accel_i2c_probe,
|
|
.remove = st_accel_i2c_remove,
|
|
.id_table = st_accel_id_table,
|
|
};
|
|
module_i2c_driver(st_accel_driver);
|
|
|
|
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
|
|
MODULE_LICENSE("GPL v2");
|