17cdd29d6e
enabling and disabling the common clocks for ehci and ohci is implemented. usbhs is a common parent platform driver for EHCI and OHCI driver. This driver receives the clock enable and disable requests from ehci and ohci drivers.The UHH and TLL initialization is also performed. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
660 lines
20 KiB
Plaintext
660 lines
20 KiB
Plaintext
#
|
|
# Multifunction miscellaneous devices
|
|
#
|
|
|
|
menuconfig MFD_SUPPORT
|
|
bool "Multifunction device drivers"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
help
|
|
Multifunction devices embed several functions (e.g. GPIOs,
|
|
touchscreens, keyboards, current regulators, power management chips,
|
|
etc...) in one single integrated circuit. They usually talk to the
|
|
main CPU through one or more IRQ lines and low speed data busses (SPI,
|
|
I2C, etc..). They appear as one single device to the main system
|
|
through the data bus and the MFD framework allows for sub devices
|
|
(a.k.a. functions) to appear as discrete platform devices.
|
|
MFDs are typically found on embedded platforms.
|
|
|
|
This option alone does not add any kernel code.
|
|
|
|
if MFD_SUPPORT
|
|
|
|
config MFD_CORE
|
|
tristate
|
|
default n
|
|
|
|
config MFD_88PM860X
|
|
bool "Support Marvell 88PM8606/88PM8607"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
This supports for Marvell 88PM8606/88PM8607 Power Management IC.
|
|
This includes the I2C driver and the core APIs _only_, you have to
|
|
select individual components like voltage regulators, RTC and
|
|
battery-charger under the corresponding menus.
|
|
|
|
config MFD_SM501
|
|
tristate "Support for Silicon Motion SM501"
|
|
---help---
|
|
This is the core driver for the Silicon Motion SM501 multimedia
|
|
companion chip. This device is a multifunction device which may
|
|
provide numerous interfaces including USB host controller, USB gadget,
|
|
asynchronous serial ports, audio functions, and a dual display video
|
|
interface. The device may be connected by PCI or local bus with
|
|
varying functions enabled.
|
|
|
|
config MFD_SM501_GPIO
|
|
bool "Export GPIO via GPIO layer"
|
|
depends on MFD_SM501 && GPIOLIB
|
|
---help---
|
|
This option uses the gpio library layer to export the 64 GPIO
|
|
lines on the SM501. The platform data is used to supply the
|
|
base number for the first GPIO line to register.
|
|
|
|
config MFD_ASIC3
|
|
bool "Support for Compaq ASIC3"
|
|
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
|
|
select MFD_CORE
|
|
---help---
|
|
This driver supports the ASIC3 multifunction chip found on many
|
|
PDAs (mainly iPAQ and HTC based ones)
|
|
|
|
config MFD_SH_MOBILE_SDHI
|
|
bool "Support for SuperH Mobile SDHI"
|
|
depends on SUPERH || ARCH_SHMOBILE
|
|
select MFD_CORE
|
|
select TMIO_MMC_DMA
|
|
---help---
|
|
This driver supports the SDHI hardware block found in many
|
|
SuperH Mobile SoCs.
|
|
|
|
config MFD_DAVINCI_VOICECODEC
|
|
tristate
|
|
select MFD_CORE
|
|
|
|
config MFD_DM355EVM_MSP
|
|
bool "DaVinci DM355 EVM microcontroller"
|
|
depends on I2C=y && MACH_DAVINCI_DM355_EVM
|
|
help
|
|
This driver supports the MSP430 microcontroller used on these
|
|
boards. MSP430 firmware manages resets and power sequencing,
|
|
inputs from buttons and the IR remote, LEDs, an RTC, and more.
|
|
|
|
config HTC_EGPIO
|
|
bool "HTC EGPIO support"
|
|
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
|
|
help
|
|
This driver supports the CPLD egpio chip present on
|
|
several HTC phones. It provides basic support for input
|
|
pins, output pins, and irqs.
|
|
|
|
config HTC_PASIC3
|
|
tristate "HTC PASIC3 LED/DS1WM chip support"
|
|
select MFD_CORE
|
|
help
|
|
This core driver provides register access for the LED/DS1WM
|
|
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
|
|
HTC Magician devices, respectively. Actual functionality is
|
|
handled by the leds-pasic3 and ds1wm drivers.
|
|
|
|
config HTC_I2CPLD
|
|
bool "HTC I2C PLD chip support"
|
|
depends on I2C=y && GPIOLIB
|
|
help
|
|
If you say yes here you get support for the supposed CPLD
|
|
found on omap850 HTC devices like the HTC Wizard and HTC Herald.
|
|
This device provides input and output GPIOs through an I2C
|
|
interface to one or more sub-chips.
|
|
|
|
config UCB1400_CORE
|
|
tristate "Philips UCB1400 Core driver"
|
|
depends on AC97_BUS
|
|
depends on GPIOLIB
|
|
help
|
|
This enables support for the Philips UCB1400 core functions.
|
|
The UCB1400 is an AC97 audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ucb1400_core.
|
|
|
|
config TPS65010
|
|
tristate "TPS6501x Power Management chips"
|
|
depends on I2C && GPIOLIB
|
|
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
|
|
help
|
|
If you say yes here you get support for the TPS6501x series of
|
|
Power Management chips. These include voltage regulators,
|
|
lithium ion/polymer battery charging, and other features that
|
|
are often used in portable devices like cell phones and cameras.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps65010.
|
|
|
|
config TPS6507X
|
|
tristate "TPS6507x Power Management / Touch Screen chips"
|
|
select MFD_CORE
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the TPS6507x series of
|
|
Power Management / Touch Screen chips. These include voltage
|
|
regulators, lithium ion/polymer battery charging, touch screen
|
|
and other features that are often used in portable devices.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps6507x.
|
|
|
|
config MENELAUS
|
|
bool "Texas Instruments TWL92330/Menelaus PM chip"
|
|
depends on I2C=y && ARCH_OMAP2
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
TWL92330/Menelaus Power Management chip. This include voltage
|
|
regulators, Dual slot memory card transceivers, real-time clock
|
|
and other features that are often used in portable devices like
|
|
cell phones and PDAs.
|
|
|
|
config TWL4030_CORE
|
|
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
help
|
|
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
|
|
This core driver provides register access and IRQ handling
|
|
facilities, and registers devices for the various functions
|
|
so that function-specific drivers can bind to them.
|
|
|
|
These multi-function chips are found on many OMAP2 and OMAP3
|
|
boards, providing power management, RTC, GPIO, keypad, a
|
|
high speed USB OTG transceiver, an audio codec (on most
|
|
versions) and many other features.
|
|
|
|
config TWL4030_POWER
|
|
bool "Support power resources on TWL4030 family chips"
|
|
depends on TWL4030_CORE && ARM
|
|
help
|
|
Say yes here if you want to use the power resources on the
|
|
TWL4030 family chips. Most of these resources are regulators,
|
|
which have a separate driver; some are control signals, such
|
|
as clock request handshaking.
|
|
|
|
This driver uses board-specific data to initialize the resources
|
|
and load scripts controling which resources are switched off/on
|
|
or reset when a sleep, wakeup or warm reset event occurs.
|
|
|
|
config TWL4030_CODEC
|
|
bool
|
|
depends on TWL4030_CORE
|
|
select MFD_CORE
|
|
default n
|
|
|
|
config TWL6030_PWM
|
|
tristate "TWL6030 PWM (Pulse Width Modulator) Support"
|
|
depends on TWL4030_CORE
|
|
select HAVE_PWM
|
|
default n
|
|
help
|
|
Say yes here if you want support for TWL6030 PWM.
|
|
This is used to control charging LED brightness.
|
|
|
|
config MFD_STMPE
|
|
bool "Support STMicroelectronics STMPE"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
Support for the STMPE family of I/O Expanders from
|
|
STMicroelectronics.
|
|
|
|
Currently supported devices are:
|
|
|
|
STMPE811: GPIO, Touchscreen
|
|
STMPE1601: GPIO, Keypad
|
|
STMPE2401: GPIO, Keypad
|
|
STMPE2403: GPIO, Keypad
|
|
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device. Currently available sub drivers are:
|
|
|
|
GPIO: stmpe-gpio
|
|
Keypad: stmpe-keypad
|
|
Touchscreen: stmpe-ts
|
|
|
|
config MFD_TC3589X
|
|
bool "Support Toshiba TC35892 and variants"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
Support for the Toshiba TC35892 and variants I/O Expander.
|
|
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config MFD_TMIO
|
|
bool
|
|
default n
|
|
|
|
config TMIO_MMC_DMA
|
|
bool
|
|
select DMA_ENGINE
|
|
select DMADEVICES
|
|
|
|
config MFD_T7L66XB
|
|
bool "Support Toshiba T7L66XB"
|
|
depends on ARM && HAVE_CLK
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller T7L66XB
|
|
|
|
config MFD_TC6387XB
|
|
bool "Support Toshiba TC6387XB"
|
|
depends on ARM && HAVE_CLK
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller TC6387XB
|
|
|
|
config MFD_TC6393XB
|
|
bool "Support Toshiba TC6393XB"
|
|
depends on GPIOLIB && ARM
|
|
select MFD_CORE
|
|
select MFD_TMIO
|
|
help
|
|
Support for Toshiba Mobile IO Controller TC6393XB
|
|
|
|
config PMIC_DA903X
|
|
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
|
|
depends on I2C=y
|
|
help
|
|
Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
|
|
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
|
|
usually found on PXA processors-based platforms. This includes
|
|
the I2C driver and the core APIs _only_, you have to select
|
|
individual components like LCD backlight, voltage regulators,
|
|
LEDs and battery-charger under the corresponding menus.
|
|
|
|
config PMIC_ADP5520
|
|
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
|
|
depends on I2C=y
|
|
help
|
|
Say yes here to add support for Analog Devices AD5520 and ADP5501,
|
|
Multifunction Power Management IC. This includes
|
|
the I2C driver and the core APIs _only_, you have to select
|
|
individual components like LCD backlight, LEDs, GPIOs and Kepad
|
|
under the corresponding menus.
|
|
|
|
config MFD_MAX8925
|
|
bool "Maxim Semiconductor MAX8925 PMIC Support"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to support for Maxim Semiconductor MAX8925. This is
|
|
a Power Management IC. This driver provies common support for
|
|
accessing the device, additional drivers must be enabled in order
|
|
to use the functionality of the device.
|
|
|
|
config MFD_MAX8998
|
|
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to support for Maxim Semiconductor MAX8998 and
|
|
National Semiconductor LP3974. This is a Power Management IC.
|
|
This driver provies common support for accessing the device,
|
|
additional drivers must be enabled in order to use the functionality
|
|
of the device.
|
|
|
|
config MFD_WM8400
|
|
tristate "Support Wolfson Microelectronics WM8400"
|
|
select MFD_CORE
|
|
depends on I2C
|
|
help
|
|
Support for the Wolfson Microelecronics WM8400 PMIC and audio
|
|
CODEC. This driver provides common support for accessing
|
|
the device, additional drivers must be enabled in order to use
|
|
the functionality of the device.
|
|
|
|
config MFD_WM831X
|
|
bool
|
|
depends on GENERIC_HARDIRQS
|
|
|
|
config MFD_WM831X_I2C
|
|
bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
|
|
select MFD_CORE
|
|
select MFD_WM831X
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
help
|
|
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
|
|
when controlled using I2C. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_WM831X_SPI
|
|
bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
|
|
select MFD_CORE
|
|
select MFD_WM831X
|
|
depends on SPI_MASTER && GENERIC_HARDIRQS
|
|
help
|
|
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
|
|
when controlled using SPI. This driver provides common support
|
|
for accessing the device, additional drivers must be enabled in
|
|
order to use the functionality of the device.
|
|
|
|
config MFD_WM8350
|
|
bool
|
|
depends on GENERIC_HARDIRQS
|
|
|
|
config MFD_WM8350_CONFIG_MODE_0
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8350_CONFIG_MODE_1
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8350_CONFIG_MODE_2
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8350_CONFIG_MODE_3
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8351_CONFIG_MODE_0
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8351_CONFIG_MODE_1
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8351_CONFIG_MODE_2
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8351_CONFIG_MODE_3
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8352_CONFIG_MODE_0
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8352_CONFIG_MODE_1
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8352_CONFIG_MODE_2
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8352_CONFIG_MODE_3
|
|
bool
|
|
depends on MFD_WM8350
|
|
|
|
config MFD_WM8350_I2C
|
|
bool "Support Wolfson Microelectronics WM8350 with I2C"
|
|
select MFD_WM8350
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
help
|
|
The WM8350 is an integrated audio and power management
|
|
subsystem with watchdog and RTC functionality for embedded
|
|
systems. This option enables core support for the WM8350 with
|
|
I2C as the control interface. Additional options must be
|
|
selected to enable support for the functionality of the chip.
|
|
|
|
config MFD_WM8994
|
|
bool "Support Wolfson Microelectronics WM8994"
|
|
select MFD_CORE
|
|
depends on I2C=y && GENERIC_HARDIRQS
|
|
help
|
|
The WM8994 is a highly integrated hi-fi CODEC designed for
|
|
smartphone applicatiosn. As well as audio functionality it
|
|
has on board GPIO and regulator functionality which is
|
|
supported via the relevant subsystems. This driver provides
|
|
core support for the WM8994, in order to use the actual
|
|
functionaltiy of the device other drivers must be enabled.
|
|
|
|
config MFD_PCF50633
|
|
tristate "Support for NXP PCF50633"
|
|
depends on I2C
|
|
help
|
|
Say yes here if you have NXP PCF50633 chip on your board.
|
|
This core driver provides register access and IRQ handling
|
|
facilities, and registers devices for the various functions
|
|
so that function-specific drivers can bind to them.
|
|
|
|
config MFD_MC13783
|
|
tristate
|
|
|
|
config MFD_MC13XXX
|
|
tristate "Support Freescale MC13783 and MC13892"
|
|
depends on SPI_MASTER
|
|
select MFD_CORE
|
|
select MFD_MC13783
|
|
help
|
|
Support for the Freescale (Atlas) PMIC and audio CODECs
|
|
MC13783 and MC13892.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
config PCF50633_ADC
|
|
tristate "Support for NXP PCF50633 ADC"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say yes here if you want to include support for ADC in the
|
|
NXP PCF50633 chip.
|
|
|
|
config PCF50633_GPIO
|
|
tristate "Support for NXP PCF50633 GPIO"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say yes here if you want to include support GPIO for pins on
|
|
the PCF50633 chip.
|
|
|
|
config ABX500_CORE
|
|
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
|
|
default y if ARCH_U300 || ARCH_U8500
|
|
help
|
|
Say yes here if you have the ABX500 Mixed Signal IC family
|
|
chips. This core driver expose register access functions.
|
|
Functionality specific drivers using these functions can
|
|
remain unchanged when IC changes. Binding of the functions to
|
|
actual register access is done by the IC core driver.
|
|
|
|
config AB3100_CORE
|
|
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
|
|
depends on I2C=y && ABX500_CORE
|
|
select MFD_CORE
|
|
default y if ARCH_U300
|
|
help
|
|
Select this to enable the AB3100 Mixed Signal IC core
|
|
functionality. This connects to a AB3100 on the I2C bus
|
|
and expose a number of symbols needed for dependent devices
|
|
to read and write registers and subscribe to events from
|
|
this multi-functional IC. This is needed to use other features
|
|
of the AB3100 such as battery-backed RTC, charging control,
|
|
LEDs, vibrator, system power and temperature, power management
|
|
and ALSA sound.
|
|
|
|
config AB3100_OTP
|
|
tristate "ST-Ericsson AB3100 OTP functions"
|
|
depends on AB3100_CORE
|
|
default y if AB3100_CORE
|
|
help
|
|
Select this to enable the AB3100 Mixed Signal IC OTP (one-time
|
|
programmable memory) support. This exposes a sysfs file to read
|
|
out OTP values.
|
|
|
|
config EZX_PCAP
|
|
bool "PCAP Support"
|
|
depends on GENERIC_HARDIRQS && SPI_MASTER
|
|
help
|
|
This enables the PCAP ASIC present on EZX Phones. This is
|
|
needed for MMC, TouchScreen, Sound, USB, etc..
|
|
|
|
config AB8500_CORE
|
|
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
|
|
depends on GENERIC_HARDIRQS && ABX500_CORE
|
|
select MFD_CORE
|
|
help
|
|
Select this option to enable access to AB8500 power management
|
|
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
|
|
since hardware version v1.0) or the I2C bus via PRCMU. It also adds
|
|
the irq_chip parts for handling the Mixed Signal chip events.
|
|
This chip embeds various other multimedia funtionalities as well.
|
|
|
|
config AB8500_I2C_CORE
|
|
bool "AB8500 register access via PRCMU I2C"
|
|
depends on AB8500_CORE && UX500_SOC_DB8500
|
|
default y
|
|
help
|
|
This enables register access to the AB8500 chip via PRCMU I2C.
|
|
The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
|
|
the I2C bus is connected to the Power Reset
|
|
and Mangagement Unit, PRCMU.
|
|
|
|
config AB8500_DEBUG
|
|
bool "Enable debug info via debugfs"
|
|
depends on AB8500_CORE && DEBUG_FS
|
|
default y if DEBUG_FS
|
|
help
|
|
Select this option if you want debug information using the debug
|
|
filesystem, debugfs.
|
|
|
|
config AB3550_CORE
|
|
bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
|
|
select MFD_CORE
|
|
depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
|
|
help
|
|
Select this to enable the AB3550 Mixed Signal IC core
|
|
functionality. This connects to a AB3550 on the I2C bus
|
|
and expose a number of symbols needed for dependent devices
|
|
to read and write registers and subscribe to events from
|
|
this multi-functional IC. This is needed to use other features
|
|
of the AB3550 such as battery-backed RTC, charging control,
|
|
LEDs, vibrator, system power and temperature, power management
|
|
and ALSA sound.
|
|
|
|
config MFD_CS5535
|
|
tristate "Support for CS5535 and CS5536 southbridge core functions"
|
|
select MFD_CORE
|
|
depends on PCI
|
|
---help---
|
|
This is the core driver for CS5535/CS5536 MFD functions. This is
|
|
necessary for using the board's GPIO and MFGPT functionality.
|
|
|
|
config MFD_TIMBERDALE
|
|
tristate "Support for the Timberdale FPGA"
|
|
select MFD_CORE
|
|
depends on PCI && GPIOLIB
|
|
---help---
|
|
This is the core driver for the timberdale FPGA. This device is a
|
|
multifunction device which exposes numerous platform devices.
|
|
|
|
The timberdale FPGA can be found on the Intel Atom development board
|
|
for in-vehicle infontainment, called Russellville.
|
|
|
|
config LPC_SCH
|
|
tristate "Intel SCH LPC"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
LPC bridge function of the Intel SCH provides support for
|
|
System Management Bus and General Purpose I/O.
|
|
|
|
config MFD_RDC321X
|
|
tristate "Support for RDC-R321x southbridge"
|
|
select MFD_CORE
|
|
depends on PCI
|
|
help
|
|
Say yes here if you want to have support for the RDC R-321x SoC
|
|
southbridge which provides access to GPIOs and Watchdog using the
|
|
southbridge PCI device configuration space.
|
|
|
|
config MFD_JANZ_CMODIO
|
|
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
|
|
select MFD_CORE
|
|
depends on PCI
|
|
help
|
|
This is the core driver for the Janz CMOD-IO PCI MODULbus
|
|
carrier board. This device is a PCI to MODULbus bridge which may
|
|
host many different types of MODULbus daughterboards, including
|
|
CAN and GPIO controllers.
|
|
|
|
config MFD_JZ4740_ADC
|
|
tristate "Support for the JZ4740 SoC ADC core"
|
|
select MFD_CORE
|
|
depends on MACH_JZ4740
|
|
help
|
|
Say yes here if you want support for the ADC unit in the JZ4740 SoC.
|
|
This driver is necessary for jz4740-battery and jz4740-hwmon driver.
|
|
|
|
config MFD_TPS6586X
|
|
bool "TPS6586x Power Management chips"
|
|
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
|
|
select MFD_CORE
|
|
help
|
|
If you say yes here you get support for the TPS6586X series of
|
|
Power Management chips.
|
|
This driver provides common support for accessing the device,
|
|
additional drivers must be enabled in order to use the
|
|
functionality of the device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps6586x.
|
|
|
|
config MFD_VX855
|
|
tristate "Support for VIA VX855/VX875 integrated south bridge"
|
|
depends on PCI
|
|
select MFD_CORE
|
|
help
|
|
Say yes here to enable support for various functions of the
|
|
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
|
|
and/or vx855_gpio drivers for this to do anything useful.
|
|
|
|
config MFD_WL1273_CORE
|
|
tristate
|
|
depends on I2C
|
|
select MFD_CORE
|
|
default n
|
|
help
|
|
This is the core driver for the TI WL1273 FM radio. This MFD
|
|
driver connects the radio-wl1273 V4L2 module and the wl1273
|
|
audio codec.
|
|
|
|
config MFD_OMAP_USB_HOST
|
|
bool "Support OMAP USBHS core driver"
|
|
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
|
|
default y
|
|
help
|
|
This is the core driver for the OAMP EHCI and OHCI drivers.
|
|
This MFD driver does the required setup functionalities for
|
|
OMAP USB Host drivers.
|
|
|
|
endif # MFD_SUPPORT
|
|
|
|
menu "Multimedia Capabilities Port drivers"
|
|
depends on ARCH_SA1100
|
|
|
|
config MCP
|
|
tristate
|
|
|
|
# Interface drivers
|
|
config MCP_SA11X0
|
|
tristate "Support SA11x0 MCP interface"
|
|
depends on ARCH_SA1100
|
|
select MCP
|
|
|
|
# Chip drivers
|
|
config MCP_UCB1200
|
|
tristate "Support for UCB1200 / UCB1300"
|
|
depends on MCP
|
|
|
|
config MCP_UCB1200_TS
|
|
tristate "Touchscreen interface support"
|
|
depends on MCP_UCB1200 && INPUT
|
|
|
|
endmenu
|