linux/drivers/pinctrl/pinctrl-exynos5440.c
Fan Wu 2243a87d90 pinctrl: avoid duplicated calling enable_pinmux_setting for a pin
What the patch does:
1. Call pinmux_disable_setting ahead of pinmux_enable_setting
  each time pinctrl_select_state is called
2. Remove the HW disable operation in pinmux_disable_setting function.
3. Remove the disable ops in struct pinmux_ops
4. Remove all the disable ops users in current code base.

Notes:
1. Great thanks for the suggestion from Linus, Tony Lindgren and
   Stephen Warren and Everyone that shared comments on this patch.
2. The patch also includes comment fixes from Stephen Warren.

The reason why we do this:
1. To avoid duplicated calling of the enable_setting operation
   without disabling operation inbetween which will let the pin
   descriptor desc->mux_usecount increase monotonously.
2. The HW pin disable operation is not useful for any of the
   existing platforms.
   And this can be used to avoid the HW glitch after using the
   item #1 modification.

In the following case, the issue can be reproduced:
1. There is a driver that need to switch pin state dynamically,
   e.g. between "sleep" and "default" state
2. The pin setting configuration in a DTS node may be like this:

  component a {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&a_grp_setting &c_grp_setting>;
	pinctrl-1 = <&b_grp_setting &c_grp_setting>;
  }

  The "c_grp_setting" config node is totally identical, maybe like
  following one:

  c_grp_setting: c_grp_setting {
	pinctrl-single,pins = <GPIO48 AF6>;
  }

3. When switching the pin state in the following official pinctrl
   sequence:
	pin = pinctrl_get();
	state = pinctrl_lookup_state(wanted_state);
	pinctrl_select_state(state);
	pinctrl_put();

Test Result:
1. The switch is completed as expected, that is: the device's
   pin configuration is changed according to the description in the
   "wanted_state" group setting
2. The "desc->mux_usecount" of the corresponding pins in "c_group"
   is increased without being decreased, because the "desc" is for
   each physical pin while the setting is for each setting node
   in the DTS.
   Thus, if the "c_grp_setting" in pinctrl-0 is not disabled ahead
   of enabling "c_grp_setting" in pinctrl-1, the desc->mux_usecount
   will keep increasing without any chance to be decreased.

According to the comments in the original code, only the setting,
in old state but not in new state, will be "disabled" (calling
pinmux_disable_setting), which is correct logic but not intact. We
still need consider case that the setting is in both old state
and new state. We can do this in the following two ways:

1. Avoid to "enable"(calling pinmux_enable_setting) the "same pin
   setting" repeatedly
2. "Disable"(calling pinmux_disable_setting) the "same pin setting",
   actually two setting instances, ahead of enabling them.

Analysis:
1. The solution #2 is better because it can avoid too much
   iteration.
2. If we disable all of the settings in the old state and one of
   the setting(s) exist in the new state, the pins mux function
   change may happen when some SoC vendors defined the
   "pinctrl-single,function-off"
   in their DTS file.
   old_setting => disabled_setting => new_setting.
3. In the pinmux framework, when a pin state is switched, the
   setting in the old state should be marked as "disabled".

Conclusion:
1. To Remove the HW disabling operation to above the glitch mentioned
   above.
2. Handle the issue mentioned above by disabling all of the settings
   in old state and then enable the all of the settings in new state.

Signed-off-by: Fan Wu <fwu@marvell.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:26 +02:00

1062 lines
29 KiB
C

/*
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's EXYNOS5440 SoC.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include "core.h"
/* EXYNOS5440 GPIO and Pinctrl register offsets */
#define GPIO_MUX 0x00
#define GPIO_IE 0x04
#define GPIO_INT 0x08
#define GPIO_TYPE 0x0C
#define GPIO_VAL 0x10
#define GPIO_OE 0x14
#define GPIO_IN 0x18
#define GPIO_PE 0x1C
#define GPIO_PS 0x20
#define GPIO_SR 0x24
#define GPIO_DS0 0x28
#define GPIO_DS1 0x2C
#define EXYNOS5440_MAX_PINS 23
#define EXYNOS5440_MAX_GPIO_INT 8
#define PIN_NAME_LENGTH 10
#define GROUP_SUFFIX "-grp"
#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
#define FUNCTION_SUFFIX "-mux"
#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
/*
* pin configuration type and its value are packed together into a 16-bits.
* The upper 8-bits represent the configuration type and the lower 8-bits
* hold the value of the configuration type.
*/
#define PINCFG_TYPE_MASK 0xFF
#define PINCFG_VALUE_SHIFT 8
#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
PINCFG_VALUE_SHIFT)
/**
* enum pincfg_type - possible pin configuration types supported.
* @PINCFG_TYPE_PUD: Pull up/down configuration.
* @PINCFG_TYPE_DRV: Drive strength configuration.
* @PINCFG_TYPE_SKEW_RATE: Skew rate configuration.
* @PINCFG_TYPE_INPUT_TYPE: Pin input type configuration.
*/
enum pincfg_type {
PINCFG_TYPE_PUD,
PINCFG_TYPE_DRV,
PINCFG_TYPE_SKEW_RATE,
PINCFG_TYPE_INPUT_TYPE
};
/**
* struct exynos5440_pin_group: represent group of pins for pincfg setting.
* @name: name of the pin group, used to lookup the group.
* @pins: the pins included in this group.
* @num_pins: number of pins included in this group.
*/
struct exynos5440_pin_group {
const char *name;
const unsigned int *pins;
u8 num_pins;
};
/**
* struct exynos5440_pmx_func: represent a pin function.
* @name: name of the pin function, used to lookup the function.
* @groups: one or more names of pin groups that provide this function.
* @num_groups: number of groups included in @groups.
* @function: the function number to be programmed when selected.
*/
struct exynos5440_pmx_func {
const char *name;
const char **groups;
u8 num_groups;
unsigned long function;
};
/**
* struct exynos5440_pinctrl_priv_data: driver's private runtime data.
* @reg_base: ioremapped based address of the register space.
* @gc: gpio chip registered with gpiolib.
* @pin_groups: list of pin groups parsed from device tree.
* @nr_groups: number of pin groups available.
* @pmx_functions: list of pin functions parsed from device tree.
* @nr_functions: number of pin functions available.
*/
struct exynos5440_pinctrl_priv_data {
void __iomem *reg_base;
struct gpio_chip *gc;
struct irq_domain *irq_domain;
const struct exynos5440_pin_group *pin_groups;
unsigned int nr_groups;
const struct exynos5440_pmx_func *pmx_functions;
unsigned int nr_functions;
};
/**
* struct exynos5440_gpio_intr_data: private data for gpio interrupts.
* @priv: driver's private runtime data.
* @gpio_int: gpio interrupt number.
*/
struct exynos5440_gpio_intr_data {
struct exynos5440_pinctrl_priv_data *priv;
unsigned int gpio_int;
};
/* list of all possible config options supported */
static struct pin_config {
char *prop_cfg;
unsigned int cfg_type;
} pcfgs[] = {
{ "samsung,exynos5440-pin-pud", PINCFG_TYPE_PUD },
{ "samsung,exynos5440-pin-drv", PINCFG_TYPE_DRV },
{ "samsung,exynos5440-pin-skew-rate", PINCFG_TYPE_SKEW_RATE },
{ "samsung,exynos5440-pin-input-type", PINCFG_TYPE_INPUT_TYPE },
};
/* check if the selector is a valid pin group selector */
static int exynos5440_get_group_count(struct pinctrl_dev *pctldev)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
return priv->nr_groups;
}
/* return the name of the group selected by the group selector */
static const char *exynos5440_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
return priv->pin_groups[selector].name;
}
/* return the pin numbers associated with the specified group */
static int exynos5440_get_group_pins(struct pinctrl_dev *pctldev,
unsigned selector, const unsigned **pins, unsigned *num_pins)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
*pins = priv->pin_groups[selector].pins;
*num_pins = priv->pin_groups[selector].num_pins;
return 0;
}
/* create pinctrl_map entries by parsing device tree nodes */
static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np, struct pinctrl_map **maps,
unsigned *nmaps)
{
struct device *dev = pctldev->dev;
struct pinctrl_map *map;
unsigned long *cfg = NULL;
char *gname, *fname;
int cfg_cnt = 0, map_cnt = 0, idx = 0;
/* count the number of config options specfied in the node */
for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++)
if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
cfg_cnt++;
/*
* Find out the number of map entries to create. All the config options
* can be accomadated into a single config map entry.
*/
if (cfg_cnt)
map_cnt = 1;
if (of_find_property(np, "samsung,exynos5440-pin-function", NULL))
map_cnt++;
if (!map_cnt) {
dev_err(dev, "node %s does not have either config or function "
"configurations\n", np->name);
return -EINVAL;
}
/* Allocate memory for pin-map entries */
map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
if (!map) {
dev_err(dev, "could not alloc memory for pin-maps\n");
return -ENOMEM;
}
*nmaps = 0;
/*
* Allocate memory for pin group name. The pin group name is derived
* from the node name from which these map entries are be created.
*/
gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
if (!gname) {
dev_err(dev, "failed to alloc memory for group name\n");
goto free_map;
}
snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
/*
* don't have config options? then skip over to creating function
* map entries.
*/
if (!cfg_cnt)
goto skip_cfgs;
/* Allocate memory for config entries */
cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
if (!cfg) {
dev_err(dev, "failed to alloc memory for configs\n");
goto free_gname;
}
/* Prepare a list of config settings */
for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
u32 value;
if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
cfg[cfg_cnt++] =
PINCFG_PACK(pcfgs[idx].cfg_type, value);
}
/* create the config map entry */
map[*nmaps].data.configs.group_or_pin = gname;
map[*nmaps].data.configs.configs = cfg;
map[*nmaps].data.configs.num_configs = cfg_cnt;
map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
*nmaps += 1;
skip_cfgs:
/* create the function map entry */
if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
if (!fname) {
dev_err(dev, "failed to alloc memory for func name\n");
goto free_cfg;
}
snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
FUNCTION_SUFFIX);
map[*nmaps].data.mux.group = gname;
map[*nmaps].data.mux.function = fname;
map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
*nmaps += 1;
}
*maps = map;
return 0;
free_cfg:
kfree(cfg);
free_gname:
kfree(gname);
free_map:
kfree(map);
return -ENOMEM;
}
/* free the memory allocated to hold the pin-map table */
static void exynos5440_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
int idx;
for (idx = 0; idx < num_maps; idx++) {
if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
kfree(map[idx].data.mux.function);
if (!idx)
kfree(map[idx].data.mux.group);
} else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
kfree(map[idx].data.configs.configs);
if (!idx)
kfree(map[idx].data.configs.group_or_pin);
}
};
kfree(map);
}
/* list of pinctrl callbacks for the pinctrl core */
static const struct pinctrl_ops exynos5440_pctrl_ops = {
.get_groups_count = exynos5440_get_group_count,
.get_group_name = exynos5440_get_group_name,
.get_group_pins = exynos5440_get_group_pins,
.dt_node_to_map = exynos5440_dt_node_to_map,
.dt_free_map = exynos5440_dt_free_map,
};
/* check if the selector is a valid pin function selector */
static int exynos5440_get_functions_count(struct pinctrl_dev *pctldev)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
return priv->nr_functions;
}
/* return the name of the pin function specified */
static const char *exynos5440_pinmux_get_fname(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
return priv->pmx_functions[selector].name;
}
/* return the groups associated for the specified function selector */
static int exynos5440_pinmux_get_groups(struct pinctrl_dev *pctldev,
unsigned selector, const char * const **groups,
unsigned * const num_groups)
{
struct exynos5440_pinctrl_priv_data *priv;
priv = pinctrl_dev_get_drvdata(pctldev);
*groups = priv->pmx_functions[selector].groups;
*num_groups = priv->pmx_functions[selector].num_groups;
return 0;
}
/* enable or disable a pinmux function */
static void exynos5440_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group, bool enable)
{
struct exynos5440_pinctrl_priv_data *priv;
void __iomem *base;
u32 function;
u32 data;
priv = pinctrl_dev_get_drvdata(pctldev);
base = priv->reg_base;
function = priv->pmx_functions[selector].function;
data = readl(base + GPIO_MUX);
if (enable)
data |= (1 << function);
else
data &= ~(1 << function);
writel(data, base + GPIO_MUX);
}
/* enable a specified pinmux by writing to registers */
static int exynos5440_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group)
{
exynos5440_pinmux_setup(pctldev, selector, group, true);
return 0;
}
/*
* The calls to gpio_direction_output() and gpio_direction_input()
* leads to this function call (via the pinctrl_gpio_direction_{input|output}()
* function called from the gpiolib interface).
*/
static int exynos5440_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool input)
{
return 0;
}
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
static const struct pinmux_ops exynos5440_pinmux_ops = {
.get_functions_count = exynos5440_get_functions_count,
.get_function_name = exynos5440_pinmux_get_fname,
.get_function_groups = exynos5440_pinmux_get_groups,
.enable = exynos5440_pinmux_enable,
.gpio_set_direction = exynos5440_pinmux_gpio_set_direction,
};
/* set the pin config settings for a specified pin */
static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs,
unsigned num_configs)
{
struct exynos5440_pinctrl_priv_data *priv;
void __iomem *base;
enum pincfg_type cfg_type;
u32 cfg_value;
u32 data;
int i;
priv = pinctrl_dev_get_drvdata(pctldev);
base = priv->reg_base;
for (i = 0; i < num_configs; i++) {
cfg_type = PINCFG_UNPACK_TYPE(configs[i]);
cfg_value = PINCFG_UNPACK_VALUE(configs[i]);
switch (cfg_type) {
case PINCFG_TYPE_PUD:
/* first set pull enable/disable bit */
data = readl(base + GPIO_PE);
data &= ~(1 << pin);
if (cfg_value)
data |= (1 << pin);
writel(data, base + GPIO_PE);
/* then set pull up/down bit */
data = readl(base + GPIO_PS);
data &= ~(1 << pin);
if (cfg_value == 2)
data |= (1 << pin);
writel(data, base + GPIO_PS);
break;
case PINCFG_TYPE_DRV:
/* set the first bit of the drive strength */
data = readl(base + GPIO_DS0);
data &= ~(1 << pin);
data |= ((cfg_value & 1) << pin);
writel(data, base + GPIO_DS0);
cfg_value >>= 1;
/* set the second bit of the driver strength */
data = readl(base + GPIO_DS1);
data &= ~(1 << pin);
data |= ((cfg_value & 1) << pin);
writel(data, base + GPIO_DS1);
break;
case PINCFG_TYPE_SKEW_RATE:
data = readl(base + GPIO_SR);
data &= ~(1 << pin);
data |= ((cfg_value & 1) << pin);
writel(data, base + GPIO_SR);
break;
case PINCFG_TYPE_INPUT_TYPE:
data = readl(base + GPIO_TYPE);
data &= ~(1 << pin);
data |= ((cfg_value & 1) << pin);
writel(data, base + GPIO_TYPE);
break;
default:
WARN_ON(1);
return -EINVAL;
}
} /* for each config */
return 0;
}
/* get the pin config settings for a specified pin */
static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
struct exynos5440_pinctrl_priv_data *priv;
void __iomem *base;
enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
u32 data;
priv = pinctrl_dev_get_drvdata(pctldev);
base = priv->reg_base;
switch (cfg_type) {
case PINCFG_TYPE_PUD:
data = readl(base + GPIO_PE);
data = (data >> pin) & 1;
if (!data)
*config = 0;
else
*config = ((readl(base + GPIO_PS) >> pin) & 1) + 1;
break;
case PINCFG_TYPE_DRV:
data = readl(base + GPIO_DS0);
data = (data >> pin) & 1;
*config = data;
data = readl(base + GPIO_DS1);
data = (data >> pin) & 1;
*config |= (data << 1);
break;
case PINCFG_TYPE_SKEW_RATE:
data = readl(base + GPIO_SR);
*config = (data >> pin) & 1;
break;
case PINCFG_TYPE_INPUT_TYPE:
data = readl(base + GPIO_TYPE);
*config = (data >> pin) & 1;
break;
default:
WARN_ON(1);
return -EINVAL;
}
return 0;
}
/* set the pin config settings for a specified pin group */
static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *configs,
unsigned num_configs)
{
struct exynos5440_pinctrl_priv_data *priv;
const unsigned int *pins;
unsigned int cnt;
priv = pinctrl_dev_get_drvdata(pctldev);
pins = priv->pin_groups[group].pins;
for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++)
exynos5440_pinconf_set(pctldev, pins[cnt], configs,
num_configs);
return 0;
}
/* get the pin config settings for a specified pin group */
static int exynos5440_pinconf_group_get(struct pinctrl_dev *pctldev,
unsigned int group, unsigned long *config)
{
struct exynos5440_pinctrl_priv_data *priv;
const unsigned int *pins;
priv = pinctrl_dev_get_drvdata(pctldev);
pins = priv->pin_groups[group].pins;
exynos5440_pinconf_get(pctldev, pins[0], config);
return 0;
}
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
static const struct pinconf_ops exynos5440_pinconf_ops = {
.pin_config_get = exynos5440_pinconf_get,
.pin_config_set = exynos5440_pinconf_set,
.pin_config_group_get = exynos5440_pinconf_group_get,
.pin_config_group_set = exynos5440_pinconf_group_set,
};
/* gpiolib gpio_set callback function */
static void exynos5440_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev);
void __iomem *base = priv->reg_base;
u32 data;
data = readl(base + GPIO_VAL);
data &= ~(1 << offset);
if (value)
data |= 1 << offset;
writel(data, base + GPIO_VAL);
}
/* gpiolib gpio_get callback function */
static int exynos5440_gpio_get(struct gpio_chip *gc, unsigned offset)
{
struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev);
void __iomem *base = priv->reg_base;
u32 data;
data = readl(base + GPIO_IN);
data >>= offset;
data &= 1;
return data;
}
/* gpiolib gpio_direction_input callback function */
static int exynos5440_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev);
void __iomem *base = priv->reg_base;
u32 data;
/* first disable the data output enable on this pin */
data = readl(base + GPIO_OE);
data &= ~(1 << offset);
writel(data, base + GPIO_OE);
/* now enable input on this pin */
data = readl(base + GPIO_IE);
data |= 1 << offset;
writel(data, base + GPIO_IE);
return 0;
}
/* gpiolib gpio_direction_output callback function */
static int exynos5440_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev);
void __iomem *base = priv->reg_base;
u32 data;
exynos5440_gpio_set(gc, offset, value);
/* first disable the data input enable on this pin */
data = readl(base + GPIO_IE);
data &= ~(1 << offset);
writel(data, base + GPIO_IE);
/* now enable output on this pin */
data = readl(base + GPIO_OE);
data |= 1 << offset;
writel(data, base + GPIO_OE);
return 0;
}
/* gpiolib gpio_to_irq callback function */
static int exynos5440_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct exynos5440_pinctrl_priv_data *priv = dev_get_drvdata(gc->dev);
unsigned int virq;
if (offset < 16 || offset > 23)
return -ENXIO;
if (!priv->irq_domain)
return -ENXIO;
virq = irq_create_mapping(priv->irq_domain, offset - 16);
return virq ? : -ENXIO;
}
/* parse the pin numbers listed in the 'samsung,exynos5440-pins' property */
static int exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev,
struct device_node *cfg_np, unsigned int **pin_list,
unsigned int *npins)
{
struct device *dev = &pdev->dev;
struct property *prop;
prop = of_find_property(cfg_np, "samsung,exynos5440-pins", NULL);
if (!prop)
return -ENOENT;
*npins = prop->length / sizeof(unsigned long);
if (!*npins) {
dev_err(dev, "invalid pin list in %s node", cfg_np->name);
return -EINVAL;
}
*pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
if (!*pin_list) {
dev_err(dev, "failed to allocate memory for pin list\n");
return -ENOMEM;
}
return of_property_read_u32_array(cfg_np, "samsung,exynos5440-pins",
*pin_list, *npins);
}
/*
* Parse the information about all the available pin groups and pin functions
* from device node of the pin-controller.
*/
static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
struct exynos5440_pinctrl_priv_data *priv)
{
struct device *dev = &pdev->dev;
struct device_node *dev_np = dev->of_node;
struct device_node *cfg_np;
struct exynos5440_pin_group *groups, *grp;
struct exynos5440_pmx_func *functions, *func;
unsigned *pin_list;
unsigned int npins, grp_cnt, func_idx = 0;
char *gname, *fname;
int ret;
grp_cnt = of_get_child_count(dev_np);
if (!grp_cnt)
return -EINVAL;
groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
if (!groups) {
dev_err(dev, "failed allocate memory for ping group list\n");
return -EINVAL;
}
grp = groups;
functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
if (!functions) {
dev_err(dev, "failed to allocate memory for function list\n");
return -EINVAL;
}
func = functions;
/*
* Iterate over all the child nodes of the pin controller node
* and create pin groups and pin function lists.
*/
for_each_child_of_node(dev_np, cfg_np) {
u32 function;
ret = exynos5440_pinctrl_parse_dt_pins(pdev, cfg_np,
&pin_list, &npins);
if (ret) {
gname = NULL;
goto skip_to_pin_function;
}
/* derive pin group name from the node name */
gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
GFP_KERNEL);
if (!gname) {
dev_err(dev, "failed to alloc memory for group name\n");
return -ENOMEM;
}
snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
GROUP_SUFFIX);
grp->name = gname;
grp->pins = pin_list;
grp->num_pins = npins;
grp++;
skip_to_pin_function:
ret = of_property_read_u32(cfg_np, "samsung,exynos5440-pin-function",
&function);
if (ret)
continue;
/* derive function name from the node name */
fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
GFP_KERNEL);
if (!fname) {
dev_err(dev, "failed to alloc memory for func name\n");
return -ENOMEM;
}
snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
FUNCTION_SUFFIX);
func->name = fname;
func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
if (!func->groups) {
dev_err(dev, "failed to alloc memory for group list "
"in pin function");
return -ENOMEM;
}
func->groups[0] = gname;
func->num_groups = gname ? 1 : 0;
func->function = function;
func++;
func_idx++;
}
priv->pin_groups = groups;
priv->nr_groups = grp_cnt;
priv->pmx_functions = functions;
priv->nr_functions = func_idx;
return 0;
}
/* register the pinctrl interface with the pinctrl subsystem */
static int exynos5440_pinctrl_register(struct platform_device *pdev,
struct exynos5440_pinctrl_priv_data *priv)
{
struct device *dev = &pdev->dev;
struct pinctrl_desc *ctrldesc;
struct pinctrl_dev *pctl_dev;
struct pinctrl_pin_desc *pindesc, *pdesc;
struct pinctrl_gpio_range grange;
char *pin_names;
int pin, ret;
ctrldesc = devm_kzalloc(dev, sizeof(*ctrldesc), GFP_KERNEL);
if (!ctrldesc) {
dev_err(dev, "could not allocate memory for pinctrl desc\n");
return -ENOMEM;
}
ctrldesc->name = "exynos5440-pinctrl";
ctrldesc->owner = THIS_MODULE;
ctrldesc->pctlops = &exynos5440_pctrl_ops;
ctrldesc->pmxops = &exynos5440_pinmux_ops;
ctrldesc->confops = &exynos5440_pinconf_ops;
pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
EXYNOS5440_MAX_PINS, GFP_KERNEL);
if (!pindesc) {
dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
return -ENOMEM;
}
ctrldesc->pins = pindesc;
ctrldesc->npins = EXYNOS5440_MAX_PINS;
/* dynamically populate the pin number and pin name for pindesc */
for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
pdesc->number = pin;
/*
* allocate space for storing the dynamically generated names for all
* the pins which belong to this pin-controller.
*/
pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
ctrldesc->npins, GFP_KERNEL);
if (!pin_names) {
dev_err(&pdev->dev, "mem alloc for pin names failed\n");
return -ENOMEM;
}
/* for each pin, set the name of the pin */
for (pin = 0; pin < ctrldesc->npins; pin++) {
snprintf(pin_names, 6, "gpio%02d", pin);
pdesc = pindesc + pin;
pdesc->name = pin_names;
pin_names += PIN_NAME_LENGTH;
}
ret = exynos5440_pinctrl_parse_dt(pdev, priv);
if (ret)
return ret;
pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, priv);
if (!pctl_dev) {
dev_err(&pdev->dev, "could not register pinctrl driver\n");
return -EINVAL;
}
grange.name = "exynos5440-pctrl-gpio-range";
grange.id = 0;
grange.base = 0;
grange.npins = EXYNOS5440_MAX_PINS;
grange.gc = priv->gc;
pinctrl_add_gpio_range(pctl_dev, &grange);
return 0;
}
/* register the gpiolib interface with the gpiolib subsystem */
static int exynos5440_gpiolib_register(struct platform_device *pdev,
struct exynos5440_pinctrl_priv_data *priv)
{
struct gpio_chip *gc;
int ret;
gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
if (!gc) {
dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
return -ENOMEM;
}
priv->gc = gc;
gc->base = 0;
gc->ngpio = EXYNOS5440_MAX_PINS;
gc->dev = &pdev->dev;
gc->set = exynos5440_gpio_set;
gc->get = exynos5440_gpio_get;
gc->direction_input = exynos5440_gpio_direction_input;
gc->direction_output = exynos5440_gpio_direction_output;
gc->to_irq = exynos5440_gpio_to_irq;
gc->label = "gpiolib-exynos5440";
gc->owner = THIS_MODULE;
ret = gpiochip_add(gc);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
"code: %d\n", gc->label, ret);
return ret;
}
return 0;
}
/* unregister the gpiolib interface with the gpiolib subsystem */
static int exynos5440_gpiolib_unregister(struct platform_device *pdev,
struct exynos5440_pinctrl_priv_data *priv)
{
int ret = gpiochip_remove(priv->gc);
if (ret) {
dev_err(&pdev->dev, "gpio chip remove failed\n");
return ret;
}
return 0;
}
static void exynos5440_gpio_irq_unmask(struct irq_data *irqd)
{
struct exynos5440_pinctrl_priv_data *d;
unsigned long gpio_int;
d = irq_data_get_irq_chip_data(irqd);
gpio_int = readl(d->reg_base + GPIO_INT);
gpio_int |= 1 << irqd->hwirq;
writel(gpio_int, d->reg_base + GPIO_INT);
}
static void exynos5440_gpio_irq_mask(struct irq_data *irqd)
{
struct exynos5440_pinctrl_priv_data *d;
unsigned long gpio_int;
d = irq_data_get_irq_chip_data(irqd);
gpio_int = readl(d->reg_base + GPIO_INT);
gpio_int &= ~(1 << irqd->hwirq);
writel(gpio_int, d->reg_base + GPIO_INT);
}
/* irq_chip for gpio interrupts */
static struct irq_chip exynos5440_gpio_irq_chip = {
.name = "exynos5440_gpio_irq_chip",
.irq_unmask = exynos5440_gpio_irq_unmask,
.irq_mask = exynos5440_gpio_irq_mask,
};
/* interrupt handler for GPIO interrupts 0..7 */
static irqreturn_t exynos5440_gpio_irq(int irq, void *data)
{
struct exynos5440_gpio_intr_data *intd = data;
struct exynos5440_pinctrl_priv_data *d = intd->priv;
int virq;
virq = irq_linear_revmap(d->irq_domain, intd->gpio_int);
if (!virq)
return IRQ_NONE;
generic_handle_irq(virq);
return IRQ_HANDLED;
}
static int exynos5440_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct exynos5440_pinctrl_priv_data *d = h->host_data;
irq_set_chip_data(virq, d);
irq_set_chip_and_handler(virq, &exynos5440_gpio_irq_chip,
handle_level_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/* irq domain callbacks for gpio interrupt controller */
static const struct irq_domain_ops exynos5440_gpio_irqd_ops = {
.map = exynos5440_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
/* setup handling of gpio interrupts */
static int exynos5440_gpio_irq_init(struct platform_device *pdev,
struct exynos5440_pinctrl_priv_data *priv)
{
struct device *dev = &pdev->dev;
struct exynos5440_gpio_intr_data *intd;
int i, irq, ret;
intd = devm_kzalloc(dev, sizeof(*intd) * EXYNOS5440_MAX_GPIO_INT,
GFP_KERNEL);
if (!intd) {
dev_err(dev, "failed to allocate memory for gpio intr data\n");
return -ENOMEM;
}
for (i = 0; i < EXYNOS5440_MAX_GPIO_INT; i++) {
irq = irq_of_parse_and_map(dev->of_node, i);
if (irq <= 0) {
dev_err(dev, "irq parsing failed\n");
return -EINVAL;
}
intd->gpio_int = i;
intd->priv = priv;
ret = devm_request_irq(dev, irq, exynos5440_gpio_irq,
0, dev_name(dev), intd++);
if (ret) {
dev_err(dev, "irq request failed\n");
return -ENXIO;
}
}
priv->irq_domain = irq_domain_add_linear(dev->of_node,
EXYNOS5440_MAX_GPIO_INT,
&exynos5440_gpio_irqd_ops, priv);
if (!priv->irq_domain) {
dev_err(dev, "failed to create irq domain\n");
return -ENXIO;
}
return 0;
}
static int exynos5440_pinctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct exynos5440_pinctrl_priv_data *priv;
struct resource *res;
int ret;
if (!dev->of_node) {
dev_err(dev, "device tree node not found\n");
return -ENODEV;
}
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(dev, "could not allocate memory for private data\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->reg_base))
return PTR_ERR(priv->reg_base);
ret = exynos5440_gpiolib_register(pdev, priv);
if (ret)
return ret;
ret = exynos5440_pinctrl_register(pdev, priv);
if (ret) {
exynos5440_gpiolib_unregister(pdev, priv);
return ret;
}
ret = exynos5440_gpio_irq_init(pdev, priv);
if (ret) {
dev_err(dev, "failed to setup gpio interrupts\n");
return ret;
}
platform_set_drvdata(pdev, priv);
dev_info(dev, "EXYNOS5440 pinctrl driver registered\n");
return 0;
}
static const struct of_device_id exynos5440_pinctrl_dt_match[] = {
{ .compatible = "samsung,exynos5440-pinctrl" },
{},
};
MODULE_DEVICE_TABLE(of, exynos5440_pinctrl_dt_match);
static struct platform_driver exynos5440_pinctrl_driver = {
.probe = exynos5440_pinctrl_probe,
.driver = {
.name = "exynos5440-pinctrl",
.owner = THIS_MODULE,
.of_match_table = exynos5440_pinctrl_dt_match,
},
};
static int __init exynos5440_pinctrl_drv_register(void)
{
return platform_driver_register(&exynos5440_pinctrl_driver);
}
postcore_initcall(exynos5440_pinctrl_drv_register);
static void __exit exynos5440_pinctrl_drv_unregister(void)
{
platform_driver_unregister(&exynos5440_pinctrl_driver);
}
module_exit(exynos5440_pinctrl_drv_unregister);
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
MODULE_DESCRIPTION("Samsung EXYNOS5440 SoC pinctrl driver");
MODULE_LICENSE("GPL v2");