acc0ccffec
This driver provides support for clock controller on Loongson-2 SoC, the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock, there are five independent PLLs inside, each of which PLL can provide up to three sets of frequency dependent clock outputs. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
342 lines
8.8 KiB
C
342 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Author: Yinbo Zhu <zhuyinbo@loongson.cn>
|
|
* Copyright (C) 2022-2023 Loongson Technology Corporation Limited
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
#include <dt-bindings/clock/loongson,ls2k-clk.h>
|
|
|
|
#define LOONGSON2_PLL_MULT_SHIFT 32
|
|
#define LOONGSON2_PLL_MULT_WIDTH 10
|
|
#define LOONGSON2_PLL_DIV_SHIFT 26
|
|
#define LOONGSON2_PLL_DIV_WIDTH 6
|
|
#define LOONGSON2_APB_FREQSCALE_SHIFT 20
|
|
#define LOONGSON2_APB_FREQSCALE_WIDTH 3
|
|
#define LOONGSON2_USB_FREQSCALE_SHIFT 16
|
|
#define LOONGSON2_USB_FREQSCALE_WIDTH 3
|
|
#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
|
|
#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
|
|
#define LOONGSON2_BOOT_FREQSCALE_SHIFT 8
|
|
#define LOONGSON2_BOOT_FREQSCALE_WIDTH 3
|
|
|
|
static void __iomem *loongson2_pll_base;
|
|
|
|
static const struct clk_parent_data pdata[] = {
|
|
{ .fw_name = "ref_100m",},
|
|
};
|
|
|
|
static struct clk_hw *loongson2_clk_register(struct device *dev,
|
|
const char *name,
|
|
const char *parent_name,
|
|
const struct clk_ops *ops,
|
|
unsigned long flags)
|
|
{
|
|
int ret;
|
|
struct clk_hw *hw;
|
|
struct clk_init_data init;
|
|
|
|
hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
|
|
if (!hw)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.ops = ops;
|
|
init.flags = flags;
|
|
init.num_parents = 1;
|
|
|
|
if (!parent_name)
|
|
init.parent_data = pdata;
|
|
else
|
|
init.parent_names = &parent_name;
|
|
|
|
hw->init = &init;
|
|
|
|
ret = devm_clk_hw_register(dev, hw);
|
|
if (ret)
|
|
hw = ERR_PTR(ret);
|
|
|
|
return hw;
|
|
}
|
|
|
|
static unsigned long loongson2_calc_pll_rate(int offset, unsigned long rate)
|
|
{
|
|
u64 val;
|
|
u32 mult, div;
|
|
|
|
val = readq(loongson2_pll_base + offset);
|
|
|
|
mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
|
|
clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
|
|
div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
|
|
clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
|
|
|
|
return div_u64((u64)rate * mult, div);
|
|
}
|
|
|
|
static unsigned long loongson2_node_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_pll_rate(0x0, parent_rate);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_node_clk_ops = {
|
|
.recalc_rate = loongson2_node_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_ddr_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_pll_rate(0x10, parent_rate);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_ddr_clk_ops = {
|
|
.recalc_rate = loongson2_ddr_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_dc_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_pll_rate(0x20, parent_rate);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_dc_clk_ops = {
|
|
.recalc_rate = loongson2_dc_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_pix0_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_pll_rate(0x30, parent_rate);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_pix0_clk_ops = {
|
|
.recalc_rate = loongson2_pix0_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_pix1_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_pll_rate(0x40, parent_rate);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_pix1_clk_ops = {
|
|
.recalc_rate = loongson2_pix1_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_calc_rate(unsigned long rate,
|
|
int shift, int width)
|
|
{
|
|
u64 val;
|
|
u32 mult;
|
|
|
|
val = readq(loongson2_pll_base + 0x50);
|
|
|
|
mult = (val >> shift) & clk_div_mask(width);
|
|
|
|
return div_u64((u64)rate * (mult + 1), 8);
|
|
}
|
|
|
|
static unsigned long loongson2_boot_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_rate(parent_rate,
|
|
LOONGSON2_BOOT_FREQSCALE_SHIFT,
|
|
LOONGSON2_BOOT_FREQSCALE_WIDTH);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_boot_clk_ops = {
|
|
.recalc_rate = loongson2_boot_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_rate(parent_rate,
|
|
LOONGSON2_APB_FREQSCALE_SHIFT,
|
|
LOONGSON2_APB_FREQSCALE_WIDTH);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_apb_clk_ops = {
|
|
.recalc_rate = loongson2_apb_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_rate(parent_rate,
|
|
LOONGSON2_USB_FREQSCALE_SHIFT,
|
|
LOONGSON2_USB_FREQSCALE_WIDTH);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_usb_clk_ops = {
|
|
.recalc_rate = loongson2_usb_recalc_rate,
|
|
};
|
|
|
|
static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return loongson2_calc_rate(parent_rate,
|
|
LOONGSON2_SATA_FREQSCALE_SHIFT,
|
|
LOONGSON2_SATA_FREQSCALE_WIDTH);
|
|
}
|
|
|
|
static const struct clk_ops loongson2_sata_clk_ops = {
|
|
.recalc_rate = loongson2_sata_recalc_rate,
|
|
};
|
|
|
|
static inline int loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
if (IS_ERR(clks[i])) {
|
|
pr_err("Loongson2 clk %u: register failed with %ld\n",
|
|
i, PTR_ERR(clks[i]));
|
|
return PTR_ERR(clks[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int loongson2_clk_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct clk_hw **hws;
|
|
struct clk_hw_onecell_data *clk_hw_data;
|
|
spinlock_t loongson2_clk_lock;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
loongson2_pll_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(loongson2_pll_base))
|
|
return PTR_ERR(loongson2_pll_base);
|
|
|
|
clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
|
|
GFP_KERNEL);
|
|
if (WARN_ON(!clk_hw_data))
|
|
return -ENOMEM;
|
|
|
|
clk_hw_data->num = LOONGSON2_CLK_END;
|
|
hws = clk_hw_data->hws;
|
|
|
|
hws[LOONGSON2_NODE_PLL] = loongson2_clk_register(dev, "node_pll",
|
|
NULL,
|
|
&loongson2_node_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_DDR_PLL] = loongson2_clk_register(dev, "ddr_pll",
|
|
NULL,
|
|
&loongson2_ddr_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_DC_PLL] = loongson2_clk_register(dev, "dc_pll",
|
|
NULL,
|
|
&loongson2_dc_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_PIX0_PLL] = loongson2_clk_register(dev, "pix0_pll",
|
|
NULL,
|
|
&loongson2_pix0_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_PIX1_PLL] = loongson2_clk_register(dev, "pix1_pll",
|
|
NULL,
|
|
&loongson2_pix1_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_BOOT_CLK] = loongson2_clk_register(dev, "boot",
|
|
NULL,
|
|
&loongson2_boot_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_NODE_CLK] = devm_clk_hw_register_divider(dev, "node",
|
|
"node_pll", 0,
|
|
loongson2_pll_base + 0x8, 0,
|
|
6, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
/*
|
|
* The hda clk divisor in the upper 32bits and the clk-prodiver
|
|
* layer code doesn't support 64bit io operation thus a conversion
|
|
* is required that subtract shift by 32 and add 4byte to the hda
|
|
* address
|
|
*/
|
|
hws[LOONGSON2_HDA_CLK] = devm_clk_hw_register_divider(dev, "hda",
|
|
"ddr_pll", 0,
|
|
loongson2_pll_base + 0x22, 12,
|
|
7, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_GPU_CLK] = devm_clk_hw_register_divider(dev, "gpu",
|
|
"ddr_pll", 0,
|
|
loongson2_pll_base + 0x18, 22,
|
|
6, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_DDR_CLK] = devm_clk_hw_register_divider(dev, "ddr",
|
|
"ddr_pll", 0,
|
|
loongson2_pll_base + 0x18, 0,
|
|
6, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_GMAC_CLK] = devm_clk_hw_register_divider(dev, "gmac",
|
|
"dc_pll", 0,
|
|
loongson2_pll_base + 0x28, 22,
|
|
6, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_DC_CLK] = devm_clk_hw_register_divider(dev, "dc",
|
|
"dc_pll", 0,
|
|
loongson2_pll_base + 0x28, 0,
|
|
6, CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_APB_CLK] = loongson2_clk_register(dev, "apb",
|
|
"gmac",
|
|
&loongson2_apb_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_USB_CLK] = loongson2_clk_register(dev, "usb",
|
|
"gmac",
|
|
&loongson2_usb_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(dev, "sata",
|
|
"gmac",
|
|
&loongson2_sata_clk_ops, 0);
|
|
|
|
hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
|
|
"pix0_pll", 0,
|
|
loongson2_pll_base + 0x38, 0, 6,
|
|
CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
|
|
"pix1_pll", 0,
|
|
loongson2_pll_base + 0x48, 0, 6,
|
|
CLK_DIVIDER_ONE_BASED,
|
|
&loongson2_clk_lock);
|
|
|
|
ret = loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_hw_data);
|
|
}
|
|
|
|
static const struct of_device_id loongson2_clk_match_table[] = {
|
|
{ .compatible = "loongson,ls2k-clk" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
|
|
|
|
static struct platform_driver loongson2_clk_driver = {
|
|
.probe = loongson2_clk_probe,
|
|
.driver = {
|
|
.name = "loongson2-clk",
|
|
.of_match_table = loongson2_clk_match_table,
|
|
},
|
|
};
|
|
module_platform_driver(loongson2_clk_driver);
|
|
|
|
MODULE_DESCRIPTION("Loongson2 clock driver");
|
|
MODULE_LICENSE("GPL");
|