Marek Vasut 19791f518f soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain ... To bring up the MX8MM GPU domain, it is necessary to configure both GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers. Without this configuration, the system might hang on boot when bringing up the GPU power domain. This is sporadically observed on multiple disparate systems. Add the GPU3D bit into MX8MM GPU domain pgc bitfield, so that both GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers are configured when bringing up the GPU domain. This fixes the sporadic hang. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>		2021-10-04 15:53:57 +08:00
..
gpc.c	soc: imx: gpc: fix power up sequencing	2020-03-16 11:39:02 +08:00
gpcv2.c	soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain	2021-10-04 15:53:57 +08:00
Kconfig	ARM: imx: fix imx8m dependencies	2021-01-11 09:36:11 +08:00
Makefile	firmware: imx: Move i.MX SCU soc driver into imx firmware folder	2020-07-13 10:02:00 +08:00
soc-imx8m.c	Revert "soc: imx8m: change to use platform driver"	2021-07-15 19:02:44 +08:00
soc-imx.c	ARM: imx: Initialize SoC ID on i.MX50	2021-05-13 15:42:21 +08:00