e0cefb3f79
This patch adds new board dts file to support Samsung Monk board which is based on Exynos3250 SoC and has different H/W configuration from Rinato. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Youngjun Cho <yj44.cho@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
28 lines
1.3 KiB
Plaintext
28 lines
1.3 KiB
Plaintext
* Samsung's Exynos SoC based boards
|
|
|
|
Required root node properties:
|
|
- compatible = should be one or more of the following.
|
|
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
|
|
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
|
|
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
|
|
- "samsung,trats" - for Exynos4210-based Tizen Reference board.
|
|
- "samsung,universal_c210" - for Exynos4210-based Samsung board.
|
|
- "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
|
|
- "samsung,trats2" - for Exynos4412-based Tizen Reference board.
|
|
- "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
|
|
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
|
|
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
|
|
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
|
|
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
|
|
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
|
|
|
|
Optional:
|
|
- firmware node, specifying presence and type of secure firmware:
|
|
- compatible: only "samsung,secure-firmware" is currently supported
|
|
- reg: address of non-secure SYSRAM used for communication with firmware
|
|
|
|
firmware@0203F000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0203F000 0x1000>;
|
|
};
|